"the [...] patch (for fg) increases the time before invisible geometry (i.e.
geometry not inside the view frustrum) gets deleted. default was 10 seconds
which i am increasing to 2 minutes."
on the '*'-key, but allow to cycle it by setting
/sim/rendering/on-screen-statistics to "true"
- move that function to the Debug menu (no more key assigned!)
- add "print-statistics" menu entry
under some circumstances. The history of this patch is somewhat unclear,
but was brought to my attention by Martin Spott, while preparing for the
Lelystad FSWeekend show. See also my posting on FlightGear devel, on
November 22, 2007 "(Multiplayer Local Echo Patch)", but wasn't committed
then because I/we assumed that had been superseded by other code
modifications. The local echo problem still persists, however, albeit
under specific circumstances. The current patch reportedly prevents this
from happening.
and the pushback code:
- Traffic manager starts modelload requests immediately upon program
loading
- Only create legs 1 (push back) or five (cruise) of AI traffic.
- AIAircraft's rather obsessive behavior to circle around a waypoint is
largely resolved
- More realistic ground steering for AI aircraft.
Thanks to Vivian Meazza for debugging this. The output deque for
FGDigitalFilter was not being kept long enough for the
doubleExponential filter. Reads from output[1] could cause a crash.
From Till:
i started the project at the end of february with a simple idea: move all
3d-model loading to the DatabasePager-thread. my first attempts looked
promising, though they were a little too optimistic (or naive?). the patch
has evolved a lot since.
currently it does the following things:
1. revive SGModelLib, move functions for xml-model-loading there
2. replace all calls to sgLoad3dModel with calls to either
SGModelLib::loadModel() or SGModelLib::loadPagedModel()
almost all models will be loaded by the DatabasePager. the few exceptions are:
your own plane, shared models in scenery, random objects, AIBallistic models.
3. simplify mode-loading functions (avoid passing around fg_root)
4. avoid supurious MatrixTransform nodes in loaded models
5. fix some memory leaks
Introduce a convenience member function in wxRadarBg for creating an
SGPropertyNode and initializing it in one step. Use this in
agRadar. This eliminates buggy behavior when the necessary radar
properties aren't defined.
$ fgfs --version
2.0pre-20080314
FG_ROOT=/usr/local/share/FlightGear
FG_HOME=/home/foo/.fgfs
... assuming that VERSION in config.h is "2.0pre-20080314". Which it isn't.
Instead it's "1.0.0" since yesterday, and was "0.9.10" before that. This
has yet to be discussed, and I'll add the option to options.xml later.
Reindent to Stroustrup style.
Make FGPrecipitationMgr an SGSubsystem and remove all references to it
in main.cxx and renderer.cxx.
Use SGGeod::makeZUpFrame instead of a private function in
tileentry.cxx. Rewrite that function, WorldCoordinate, to use
makeZUpFrame too.
Makes it possible to start at a parking location defined in the AI/Airports/*/parking.xml files, using the parkpos command line option.
Note that the name to pass is the concatenation of the "name" and "number" fields in the xml.
This allows Nasal managed views thanks to the proximity of the
event manager (which executes Nasal loops). The io manager must
come after the view manager to avoid jitter in network replay.
As discussed with Tim on irc: Here is a quick fix for the memory-hungry tile
manager. Due to bugs in FGNewCache, old tiles were never deleted.
I left the timestamp-updates in the cull-traversal. but imho things work
just as well when timestamps are updated in FGNewCache::insert_tile() and
FGNewCache::get_tile()
Lee has added two new filter types, "gain" and "reciprocal". These filters can
read their gain factor from a property. In the process we also added minimum
and maximum output clamps that are applicable to all filters.
I added the ability to configure adaptive controllers i.e. the controller gain
can be tied to a property, so that it can be changed at runtime. This
requires a change in the xml structure of the autopilot configuration file:
<Kp>
<prop>/autopilot/KAP140/settings/ROL/Kp</prop>
<value>0.10</value>
</Kp> <!-- proportional gain -->
The old method <Kp>0.10</Kp> still works so as to not break all existing
autopilots, but it will output a warning to use the new method.
Please find attatched a new version of xmlauto.cxx.
Remove the call to build() in reinit(). This prevents build() from being
called twice when Reload Autopilot is selected from the Debug menu.
I've also added the ability to define an enabled property for the filters.
It's used like the PID controllers. If there is no enabled tag then the
filter defaults to enabled so that nothing should get broken by this change.
This ability can be used to create a filter between the output of a PID
controller and the property that it controls (a control surface). By putting
a noise spike filter between the output of a controller and the control
surface that it controls, we can simulate the limited movement rate that is
inherent in autopilot servos.
This patch contains bugfixes from my previous patch
(i made mistakes when using "diff" utility last time):
1. Now ATC do not tells us to go around because of
traffic on RWy, when that traffic is WE.
2. Now ATC don't say that we must follow ourself
(like "GFS, number two, follow GFS on final").
And new Tower-ATC features:
1. Requesting departure clearance. When you are
on taxiway, you can request departure clearance.
Tower will answer with something like:
"Line up runway two eight right".
TODO: check if any AI-Planes on final and tell
something like: "After the landing AI-CALLSIGN
line up runway two eight right".
2. Requesting take-off clearance. If you are on
runway, you can tell to ATC that you are ready
for take-off. So, Tower will tell you that you
are cleared for take-off (or immediate take-off).
3. Reporting landing gear position on final by pilot.
If you are on aircraft, which landing gear can
be UP, when reporting final you will tell
"Gear down, ready to land".
4. Reporting landing gear position on final by ATC.
When i was newbie and was flying on Cessna 310, i
ALWAYS forgot landing gears on final. Now if you are on
final and forgot landing gear, Tower will tell you:
"LANDING GEAR APPEARS UP" or "Check wheels down and
locked". So you will have some time to push gear
down or execute missed approach ;)
5. ATIS phonetic ID in requesting landing message.
In FG pilots says: "for full stop with ATIS" everytime
(when airport doesn't have ATIS too). But in real life
pilot saying phonetic ID of ATIS message. Now we have:
"for full stop, information alpha ... / ... zulu".
If airport doesn't have ATIS, pilot don't say this.
TODO: add this feature to AI-Planes too.
6. Advising weather condition in airport by Tower.
If you are requesting take-off or landing in airport
that doesn't have ATIS service, Tower will tell you
about wind direction and speed, visibility and QFE.
7. Reporting downwind if missed approach. When some AI-Plane
is on final FG's ATC tell you to "continue approach".
And then you lost radio transmission. Now ATC says:
"continue approach and report left/right downwind".
And now we have "Report Downwind" entry (button)
in "ATC Communication" form.
This also fixes distortion weirdness in the osgviewer version. That
was caused by osg::GraphicsContext getting in the act on resize events
and adding its own scaling to the projectionOffset of slave cameras!
The LOD far range on the tile entry scenegraph node was initialized to
0. This meant that any traverals of active children that happened
before the tile manager updated the node would ignore the node
altogether. Among these is the groundcache traversal which was failing
at startup even though scenery was loaded.
Also added a function to dump scene graph nodes to files; very handy
in gdb.
Make an OSG file reader for .stg files.
New class flightgear::SceneryPager, which is a subclass
osg::DatabasePager to handle explicit delete requests.
Modify FGNewCache, FGTileEntry, and FGTileManager to use
SceneryPager. Mostly this involved removing the queues that talked to
FGTileLoader.
Calculate accurate tile timestamps from the time they are traversed in
the cull stage (which means that they are visible) instead of updating
them periodically.
Replace tile entry transform and range node with one LOD node
This fixes a race condition when teleporting somewhere outside of the
currently loaded scenery. Before, if there was no valid scenery, an
aircraft might end up at the center of the earth...
Instead of just reporting that the magic number, length, etc. of a
multiplayer packet is invalid, abort processing this packet. Also,
check if enough space remains to send a property string.
are not available out-of-the-box on all systems and keyboards, and should
therefore not be used in files committed to CVS. This makes them well
suited for local key bindings, as they aren't likely to get overwritten
with later releases. SDL supports Meta and Super, OSG supports only Meta,
and GLUT supports neither.
(Somehow this part escaped the previous commit. :-)
are not available out-of-the-box on all systems and keyboards, and should
therefore not be used in files committed to CVS. This makes them well
suited for local key bindings, as they aren't likely to get overwritten
with later releases. SDL supports Meta and Super, OSG supports only Meta,
and GLUT supports neither.
This uses the osgViewer infrastructure instead of setting up and osg::SceneView.
When the same change is made for glut, much of render.cxx can be deleted.
Some cleanup in tileentry.cxx, but mostly code to implement loading of tiles
and their models without reference to FGTileEntry or SGBucket structures.
Also, don't do deferred model loading; load them when the tile is loaded.
_material was uninitialized. This was causing a segfault with
as-yet-to-be-checked-in paging code; I don't know if it ever resulted
in a segfault with the old tile loader, but it certainly could have.
file. Possible uses of this functionality could include converting the
model to some other format or coordinate system for use in some other
visualization or simulation.
This is required to make sure the same letter key gets released,
which got the press event. (After Ctrl-press -> a-press -> Ctrl-release
a-release we want the Ctrl-a binding released, not the a binding.)
- add key listener interface for direct key access from Nasal space
This removes some jitter in cases where Nasal is used to set up view
parameters from FDM data, such as position and orientation. (The event
subsystem handles Nasal's settimer() calls.)
This was correct in the old repository and in revision 1.1 of the new,
but then broken in revision 1.2. After that, "lookat" and "lookfrom"
mode used different coordinate systems, and the "Adjust View Distance"
didn't work correctly in "lookat" mode.
"I have been investigating the Concorde IVSI problem. I came to the
conclusion that the trouble is that the environment altitude and thus
the pressure (which is calculated from that) is lagging by 1 frame.
Normally that wouldn't be a problem, but the IVSI calculates rate of
change and it will use the new dt with the old value difference,
thereby arriving at bad results if dt changes (and it does)."
invocations, but left it in place for miscellaneous allocation work.
Contexts cache allocated objects in a temps vector and only clear it
out when they are used.
Also, fix a type warning while I'm in there.
version
* Delete ai list objects in ~ATC/AIMgr.cxx:AIMgr::~AIMgr()
* Delete colors in GUI/new_gui.cxx: NewGui::~NewGui.cxx
* Delete memory allocated to the class member "route" in
Instrumentation/gps.cxx
* Delete all globals (except a few "unsafe" ones that still cause segfaults
and need further examination.
* Use an SGShared pointer for navaid memory allocation, so that pointers to
individual navaid objects can be included safely in multiple navaid lists
- simplify listener purging and fix removelistener() return value for
one-shot listeners
- listener: inherit virtualness
- s/handler/code/ in listener code to be consistent with NasalSys::call
argument:
setlistener(<property>, <func> [, <initial=0> [, <persistent=1>]])
This definition defaults to the old behavior. The fourth argument can
be set to zero, in which case the function is only called when the
node value has actually changed. It should really default to zero, but
then all callers would have to be reviewed, which is a bit too dangerous
"shortly" before a release.
0 -> trigger whenever property is written to (even if it's the old value; default)
1 -> like 0, but also trigger the function initially
2 -> trigger initially, but then only on changes
AMIBO 34.973889 021.658056 ARLOS 34.625278 023.000000 1 095 195 M871-MT E-MT W-N4
... where unexpected ids follow (here E-MT W-N4). The loader didn't skipeol.
The additional values are for a first quick&dirty fix just dropped.
remove all those 41 hacks if possible. Metrowerks is under category
"Defunct software companies" in Wikipedia, its compiler was known to
work on PowerPC (which we don't support, anway, right?) and on some
Unices. The hacks are in CVS since the first commit 2002/9/10 (old
repository!) and probably were in the code long before that. Any
platform where such a broken compiler is still used, will hardly
be suitable to run fgfs at all.
them under /sim/presets/ but they aren't save there, and as fgInitPosition
and its subroutines overwrite them, we lose the information about what the
user really wanted. This is a temporary solution -- it really belongs into
options.cxx.
the next airport or airport with METAR station, but about any type of
airport
- as a side effect this change makes it also 30 to 50% faster :-)
In the long run this linear search shall be replaced with a spatial
algorithm (like octree), which will be a much bigger performance gain.
- preserve information from apt.dat about whether an airport is a "normal"
airport, a seaport, or a heliport. Do it without wasting another byte
in the FGAirport structure (saves 50kB of memory). Yes, I know bitfields. :-)
Turn OPENSCENEGRAPH_MAJOR_VERSION, OPENSCENEGRAPH_MINOR_VERSION and
OPENSCENEGRAPH_PATCH_VERSION into a single number for comparisons in the
preprocessor.
the runway length/width/surface material, so that fgfs doesn't drop one on
the ridiculous grass stripe parallel to the grown up concrete runway
(LOWL, LOXZ, ...). The weighting factors are for now made configurable,
so that they are easier to adjust. This can later be made static.
(will soon get forward ported to fg/osg)
Usage: airportinfo("KSFO");
airportinfo(37, 122); # airport closest to lat/lon
airportinfo(); # airport closest to current position
Returns nil on error, or a data hash otherwise. Example:
# length of runway 28R
var len = airportinfo("KSFO").runways["10L"].length;
Note that only one side of a runway is returned.
This fixes a bug that caused both the x and y values of the mouse to
be reset when the cursor was recentered due to hitting the screen
edge.
Based on a suggested patch from Stuart Buchanan
Anders said:
With Stuart's help I've looked closer at this and I think I've tracked
down the cause of the problem:
At least on my computer the sort() call on line 234 in
Environment/environment_ctrl.cxx sorts the vector entries by memory
address instead of altitude, i.e. the custom comparison predicate is not
used. This causes the tables of environment conditions to be reordered
into a wrong order at some weather updates, depending, basically,
on where the memory allocator places the objects. (Btw. why are they are
freshly allocated for each update?)
and "isOnRunway".
- Added initial support for AI controlled pushback operations, making use of the
current editing capabilities of TaxiDraw CVS / New_GUI_CODE. The current
implementation is slightly more computationally intensive than strictly
required, due to the currently inability of taxidraw to link one specific
pushBack point to to a particular startup location. FlightGear now determines
this dynamically, and once we have that functionality in TaxiDraw, the
initialization part of createPushBack() can be further simplified.
- Smoother transition from pushback to taxi. No more skipping of waypoints, and
aircraft wait for two minutes at pushback point.
- The classes FGTaxiNode, FGTaxiSegment, and FGParking, now have copy
constructors, and assignment operators.
- Removed declaration of undefined constructor FGTaxiNode(double, double, int)
- Array boundry checks and cleanup.
- Modified Dijkstra path search algoritm to solve partial problems. Currently
limited to include pushback points and routes only, but can probably be
extended to a more general approach.
- Added initial support for giving certain routes in the network a penalty, in
order to discourage the use of certain routes over others.
"interpolates METAR changes over time as follows:
1) Wind changes are interpolated as vectors, so the change is much more
natural than before - no-longer will your aircraft be suddenly shoved to
one side.
2) Visibility is interpolated as an X-value, which looks pretty neat.
3) Cloud heights and thicknesses are interpolated if they are close to the
aircraft. Cloud textures are not."
- support optional <preamble> and <postamble> which are written right
after opening and before closing respectively. This can be used for a header
line or an XML header.
- unescape <preamble>, <postamble>, <format>, <line_separator>, <var_separator>
so that \t, \n, \r, \f, \v, \xnn, \nnn can be used directly (\a and \b are
ignored; use \\ for the backslash) The long names ("carriagereturn") are still
supported for <var_separator>, but one can just use \r, or \r\n too.
- don't abort when a chunk doesn't have a <node>. This is useful for adding
constant chunks which consist only of a <format>, such as XML tags.
src/FDM/flight.cxx src/FDM/flight.hxx
src/FDM/LaRCsim/LaRCsim.cxx src/FDM/SP/ADA.cxx
src/Scenery/scenery.cxx src/Scenery/scenery.hxx:
Remove obviously unused variables from FGInterface, make use of
SGMath functions. No longer use plib math functions in FGInterface.
own preferential runway support. In future versions, we might want to
condider having a more generic mechanism for this.
- Keep a history of active runway for each class, so that runway assignments
are more consistent after whether updates or time-related schedule changes.
On most Unix platforms like FreeBSD, Solaris, IRIX (AIX is even worse)
- just not on Linux - the linker wants to know about _all_ required
libraries. So even if a shared library "libosgViewer" itself is linked
against "libosgGA" and "libosgText", you still have to name these in
order to build an "fgfs" binary.
Currently, other libraries like "-losgDB" and "-losgUtil" are
explicitly mentioned on the "fgfs" linker command, but "-losgGA" and
"-losgText" are not. This simple patch lets the linker honour
everything that's required
- Airports Directory
Thomas Foerster: Pulls out the FGTaxiNode implementation into gnnode.cxx.
Melchior / Durk: Copy Constructor and assignment operator for FGTaxiRoute
- AIModels Directory
Durk / Melchior / Czaba Halasz: Ensure that all derived classes use AIBase
member 'callsign'. Adapted, moved and deleted getter/setter functions where
necessary
Czaba Halasz: Fix AIBase model path vs. submodel path consistency.
- Traffic Directory and AIModels CreateFlightPlanCruise
DT: Temporary revert parts of the position estimation code.
(reported by Csaba Halaszi /helijah)
2) Decrease AI aircraft Heading error tolerance to 1% of its
original value. This is necessary to mitigate spinning and
makes for actual "on-runway" landings.
src/AIModel/AIFlightPlan.hxx
src/AIModel/AIFlightPlanCreateCruise.cxx
src/AIModel/AITanker.cxx src/Traffic/Schedule.cxx:
Move member variables that should better be in function local
scope into the functions. Make more use of SGMath functions.
of the extra space *required*) in a rowspan object being redistributed
back into the span, leading to a near-doubling of the size for small
objects with large span ranges.
Fixed bug due to longstanding inconsistency in FGAirport
getter functions return types.
Durk Talsma: Fixed traffic record initialization bug that occured
when taxiing traffic was waiting for traffic on runway
I refactored the XML loading code out of FGAirportDynamics and
FGRunwayPreference. I also added a new class XMLLoader, which serves as a
facade to the loader functions. Further I changed FGRunwayPreference to just
keep a FGAirport ref, which is more concise and closer to the right(tm)
solution than storing the airport data a second time ;-)
I refactored the XML loading code out of FGAirportDynamics and
FGRunwayPreference. I also added a new class XMLLoader, which serves as a
facade to the loader functions. Further I changed FGRunwayPreference to just
keep a FGAirport ref, which is more concise and closer to the right(tm)
solution than storing the airport data a second time ;-)
"This patch fixes the use of the keypad with numlock in the osgViewer
version of FlightGear."
"This also restores the handling of resize events while trying to stay
out of the way of the multiple display code."
parser. Advantages over xml.nas: (reviewed and OK'ed by Andy)
- faster (33% ... only. I had hoped for more.)
- more standards compliant
- should support UTF
- I don't have to support it. ;-)
Usage: parsexml(<path> [, <start-tag> [, <end-tag> [, <data> [, <pi>]]]]);
<path> is an absolute file path, the rest are optional callback functions.
Example:
parsexml("/tmp/foo.xml", nil, nil, func(d) { print("DATA FOUND: ", d) });
where type is one of string (default), double, float, long, int, bool
Using only the first letter works, too.
--prop:foo=123 ... sets property foo to string 123 (old behavior)
--prop:string:foo=123 ... verbose version of above
--prop:s:foo=123 ... slightly less verbose version of above
--prop:bool:foo=1 ... makes property a bool of value 'true'
I hope this isn't considered a silly gimmick. I need this often and maybe
other developers do, too. It's useful in cases where the difference really
matters. if (getprop("/foo")), for instance, is TRUE even when the property
contains string "false", as all strings are TRUE.
efficiently performing "Dijkstra algorithm".
Durk Talsma: Added the detection of "circular" wait situations in the AI
ground network. A circular wait is a situation where aircraft a waits for
b; b waits for c; and c (in turn) waits for a. The checkCircularWaits
function detects these situations.
The current "solution" to a circular wait is rather crude: Remove the
aircraft from the scene. A proper solution needs a lot more work, however,
and at least this patch stops the AI system from clogging up. in case of a
circular wait.
data for AI traffic. Default performance classes are still available as a
backup. This database will allow the calculation of aircraft-specific
take-off speed and estimate runway lenght requirements. Further added
rudimentary support for take-off and landing rotation of AIAircraft.
together -- there's only *one* instrument node now
- don't take "random" tacan, but <tacan-source> from the instrumentation
config (or /instrumentation/tacan[0] by default)
- don't take "random" display-controls from /instrumentation/tacan[0]
- default name is now "radar" (formerly "wxradar")
* it says it's a warning (while in fact it's just saying what it's doing)
* the user can't do much here (yes, flying slower, but it doesn't say that :-)
* scrolling those countless messages in the terminal puts stress on the CPU
in a time when it's apparently already struggling
- re-enable od_gauge ("owner drawn" render-to-texture instruments)
- implement radar in c++ (unlimited number of clouds/ai/mp/... objects,
better performance)
or nil if no terrain intersection could be made (tile not loaded yet).
<matdata> is a hash with information about the surface material, or nil
if no material is assigned (shouldn't really happen, but one never knows).
Example:
var ac = geo.aircraft_position();
var data = geoddata(ac.lat(), ac.lon());
debug.dump(data);
# which outputs
[ 294.5862574369132, { light_coverage : 0, bumpiness : 0, load_resistance : 1e+30,
solid : 1, names : [ "pc_taxiway", "dirt_rwytaxiway" ], friction_factor : 1,
rolling_friction : 0.02 } ]
With this information it can be determined how far an object would sink in,
if the coordinate is on a runway, etc.
foreach (var n; data[1].names)
if (string.match(n, "p[ac]_*"))
im_on_a_runway();
/sim/screneryloaded-override was "true". At least one subsystem (od_gauge)
waits for /sim/sceneryloaded to bypass CPU intensive code until the scenery
is up. This broke e.g. the RTT-radar when using /sim/screneryloaded-override
--prop:sim/sceneryloaded-override=true has the effect that fgfs
doesn't show the splash screen until the scenery is loaded, but shows
the OTW view (scenery/aircraft) at the earliest possible moment. This is
useful for developers who often need to run fgfs only to check some minor
detail, while not caring about stuttering caused by scenery loading.
simple SG_LOG instead. The user didn't call the fgcommand, so why should
s/he be bothered with that? And the actually caller of the command gets a
return value and can pop up a dialog if it thinks it's necessary.
Why /sim/fg-current at all? Because we have a file selector dialog
(still unfinished), and one might like to start it from the current
directory, to find saved flights/screenshots/whatever.
FGManipulator.*:
"This patch works around a bug in OSG's handling of modifier keys. The
symptom of the bug is that modifier keys don't appear to be released."
fg_os_osgviewer.cxx:
"This patch fixes the test for support of cursor changes in OSG 2.0."
because this allows to load from FG_HOME. To reduce security risks, always
append an ".xml" extension if there was none. Makes it hard to read /etc/secret
and to overwrite ~/.bashrc. :-)
IRC wanted this to be scritable) and add it back (as a tip popup) via
a little nasal in the keyboard handler. Also put the synthesis of
property nodes back into fgcommand(), because I got cold feet.
missing, for sanity. Note that this will pass the resulting NULL
pointer through into the underlying SGCommand handlers, some of which
may be unprepared for it. So basically this is now yet another way
you can use Nasal to exercise bugs and hose your sim; no biggie.
- if no <impact-reports> node is defined for a particular submodel, then
write the path to /ai/models/model-impact instead
- don't tie() properties that are only ever set a single time, if at all!
- better variable names
src/Scenery/tileentry.cxx: Jonathan Wagner:
Removes black dots by accounting for radius of nodes
when calculating visible nodes for traversal without removing the
optimization. Confirmed fix with a few people on IRC.
src/GUI/gui.h src/GUI/gui_funcs.cxx src/Main/fg_commands.cxx
src/Main/renderer.cxx src/Main/renderer.hxx: Tim Moore:
These patches implement a command to dump the entire OSG scene graph as
a .osg text file. While large, this allows debuggers to really see
what's happening in the scene graph.
configure.ac src/Main/Makefile.am src/Main/fg_os.cxx
src/Main/fg_os.hxx src/Main/fg_os_sdl.cxx src/Main/main.cxx
src/Main/renderer.cxx src/Main/renderer.hxx
src/Network/jpg-httpd.cxx
Added Files:
src/Main/FGManipulator.cxx src/Main/FGManipulator.hxx
src/Main/fg_os_osgviewer.cxx:
Tim Moore: Make use of osgViewer.
a report node in the submodels config:
<impact-reports>/sim/model/cow/impact</impact-reports>
When an impact happens, then the path of the submodel will be written to
this node. An attached listener function can evaluate the impact properties.
at all is that this method is meant to be deprecated. But if it doesn't
say that, and there's no generic replacement at all, then it's rather
pointless.
- simplify parameter initialization (The old code copied from Instrumentation/
but has been simplified there in the same manner a few months ago
The new method is less picky about additional nodes ane outputs less
pointless alerts. If there shall really be a check for that, then
this should be a separate function. But it's nowhere else done in fgfs.
recover instead
- it was apparently planned to run the updated loop only every 1000th
frame, but the counter isn't reset, so it runs every frame
- use SG_LOG instead of cerr
- don't add redundant slashes in SGPath::append()
throwing an instance of 'sg_io_exception'\nAbandon". And this is caused
by compiling fgfs/sg without exception support (unlikely) or linking
against a libSDL/libglut that was compiled/linked without execption
support. While we can't fix that, we can tell the users who's to blame. :-)
- handle const char * exceptions
"minor update for the rotor FDM. It results in a more realistic
calculation of the phase shift of rotor and therefor in a little bit
more realistic flight behavior.
(Additionally you can modify the initial position of the rotor and some
(not finished) modifications for the jet ranger rotor)."
show "secret" values, that is: values of nodes with children. These
can be used like all normal (leaf) properties, but their values were
until now only shown in writeProperties() dumps. Also show the
number of attached listeners. Example: foo = 'bar' (string, AU, L3).
dialog.cxx: add warning message for broken <format>s; cosmetics
- props is easy to mix up with the --prop option (for setting properties)
- the name is unspecific and inconsistent: other option names describe
the protocol -- the way to get the properties. How is, for example,
--httpd less about prop(ertie)s?
- two identical options easily confuse people, as can be seen in The
FlightGear Manual, where --telnet and --props were described differently
/sim/view[*] that it finds. It's not only unnecessary that view definitions
have subsequent indices, but aircraft are now *requested* to use indices
100++. /sim/view[0] .. /sim/view[99] are reserved for the system. (Not
that we'd ever need that many, This is just a convention, it's nowhere
hard-coded.)
- replace the string operations for property paths by method calls & other
improvements
because nasal's f_interpolate() may be called in Nasal at times when the
GENERAL subsystem group is being deconstructed; access it by addressing
the group directly, as using globals->get_subsystem() does then not
work any more then; yeah, it's all for a rare border case ... :-)
NasalSys.cxx more robust instead. The reason for the crash was that during
fgfs shutdown destroyed subsystems (GENERAL group) still need Nasal access
(for AI Model destruction listeners), but at that point globals->get_subsystem()
can't even deliver the "nasal" subsystem (INIT group). One way to solve that
problem would have been to replace globals->get_subsystem("nasal") by
globals->get_subsystem_mgr()->get_group(SGSubsystemMgr::INIT)->get_subsystem("nasal"),
but Andy decided to store a pointer to the active "nasal" subsysten in
NasalSys.cxx instead, as the "nasal" subsystem needs to be accessed in
every single Nasal extension function, and multiple "nasal" subsystems are
out of the question, anyway.
we need to explicitly destroy that here, too, so that it has guaranteed
access to the Nasal subsystem. Otherwise we get a segfault on exit. When
the next subsystem needs this special treatement (radar?), we should
introduce a new subsystem group (in addition to INIT and GENERAL)
"FATAL: PUI: No Live Interface! Forgot to call puInit ?"
We shouldn't use the splash progress message before guiInit().
Leave the "idle_state" step for now, to keep the similarity
with fg/plib as big as possible. This can be dropped later.
Patch to enable atc chatter (and any other arbitrary "message" audio file)
to be played at any specified volume. (Previously these messages were always
played at a hardcoded volume of 1.0)
- loop up file name in the cache at startup. If it's found, check if the
file exists and use it, otherwise scan $FG_ROOT/Aircraft/ as usual,
and create a new cache while doing that. Rebuild cache on FG_ROOT change.
getAttribute("archive") returns 1 if the attribute is set, and 0 otherwise.
Allow to query and to set all properties by not specifying an attribute
string: getAttribute() returns all attributes bit coded in an integer,
and setAttribute(attr) sets all attributes. No assumptions may be made
about the meaning of the bits -- they can be changed in future fgfs releases.
The only valid use is to compare or set attribute numbers obtained in the
same fgfs run. This is meant for allowing full copies of property branches.
Also add getAttribute query strings "children" for the number of children,
and "alias".
- fix breakage due to former commit (AIManager.cxx, r1.72)
- make AI properties available in AIBase
- add <valid> property for animations/nasal scripts
- support more MP and AI targets
- add target select and altitude display
their XML wrapper/animation file. They can access their /ai/models node
via cmdarg() function. Example:
<nasal>
<load>
print("Hi, I'm the Nimitz. My data are under ",
cmdarg().getPath());
</load>
<unload>
...
</unload>
</nasal>
Note, however, that the <unload> block is only called on exit at the moment,
not when the tile is unloaded.
"""
"Flight plans" which can start at a given time (gmt)
WAITUNTIL tokens which pause the flight plans until a given time (gmt)
Submodels can now be attached to any AI objects (except submodels - it can
be done, but in my experimental code it's too expensive in frame rate atm)
"No-roll" attribute added to Ballistic objects - useful for wakes and the
like
"Random" attribute added to Ballistic objects (adds =- 5% to the Cd) -
useful for smoke, exhausts
If the <trigger> tag is not specified the Ballistic object/s will be
released at start-up (cannot be stopped)
Submodels are not released from AI Objects if the AI Object is more than 15
miles away.
"""
mf: minor code and formatting fixes; submodels.?xx were FUBAR and are thus
astyle formatted;
NOTE that <name> tags END, EOF, WAIT, WAITUNTIL are *depreciated*.
Don't get too used to them. This will have to be moved from the "name"
to regular engries.
Nasal now supports calls to "subcontexts" and errors can be thrown
across them, leading to complete stack traces when call() is used,
instead of the truncated ones we now see.
Vectors can now be concatenated using the ~ operator that used to work
only for strings.
Better runtime error messages in general due to a fancier
naRuntimeError() implementation
A big data size shrink on 64 bit systems; the size of a naRef dropped
by a factor of two.
"Braceless code blocks" have been added to the parser, so you can
write expressions like "if(a) b();" just like in C. Note that there's
still a parser bug in there that fails when you nest a braced block
within a braceless one.
Character constants that appear in Nasal source code can now be
literal multibyte UTF8 characters (this was always supported for
string literals, but character constants were forced to be a single
byte).
New modules: "bits", "thread", "utf8" and (gulp...) "io". The bits
library might be useful to FlightGear, the utf8 one probably not as
Plib does not support wide character text rendering. The thread
library will work fine for spawning threads to do Nasal stuff, but
obviously contact with the rest of FlightGear must be
hand-synchronized as FlightGear isn't threadsafe. The io library is
no doubt the most useful, as it exposes all the basic stdio.h
facilities; it's also frighteningly dangerous when combined with
networked code...
have no children (in which case they default to 1px thickness & stretch).
This allows to just write <hrule/> instead of <hrule><dummy/></hrule>.
One can still use <hrule><pref-height>3</pref-height></hrule>, of course.
layout.cxx: drop silly do??Box calls for hrule/vrule (yes, I wrote that :-)
discard the display part. The curly braces wouldn't be spoken anyway,
and the | would be spoken as "vertical bar", which is completely
useless (which is why it had been disabled in the past already).
"Implement 'flightplans' for AIShips. This patch also introduces the concept
of a 'WAIT' token for AIShips: when the flightplan reaches a 'WAIT', the
AIShip stops and pauses for the specified time (secs)."
"""
Fix Y2K bug triggering string overflow
sim_control_.date_string is a char[7], so it can contain "yymmdd" and
the terminating '\0'. However, nowtime->tm_year is 107 for the year 2007,
so you'll end up with a 7 digit number and the string written to
sim_control_.date_string is longer than sim_control_.date_string is.
Ouch!
"""
mf: ... and sim_control_.date_string isn't even used.
done for performance reasons, but print() should be able to output any
valid string, and when SG_LOG uses strings and streams already, then we
can use that here, too. (Not discussed with Andy yet.)
before the property tree is stored away for reinit, so the signal would
be emitted again on reset.
- fix inconsistent style that sneaked in with a previous patch
in $FG_ROOT/Nasal/* were loaded and executed, and thus all Nasal library
functions are available. This was in the past only done with settimer(..., 0),
constructions, but suchlike triggered timer functions are executed
*after* aircraft specific Nasal files were loaded, so they can't be
used for internal library initialization, where e.g. props.Node() is
already needed.
"""
- ground properties (e.g. feel bumpiness and the reduced friction of
grass or go swimming with the beaver)
- initial load for yasim gears (to get rid of the jitter the beaver has
on ground)
- glider/winch/aerotow (do winch start with YASim glider or do aerotow
over the net) I will place a how-to on the wiki soon, here very short:
use the sgs233y (or the bocian if you have AJ (up ot now) non-GPL
bocian)
winch start: Ctrl-w for placing the winch, hold w to winch, press
Shift-w to release the tow
aerotow: Place the glider within 60m to a MP-aircraft, press
Ctrl-t to tow to this aircraft. If the MP-aircraft is the
J3 and the patch is installed on both sides, the J3 feels the
forces, too. The J3-pilot has to taxi very slow up to the
moment, the glider starts moving. Increase the throttle gently.
Don't lift the J3 early, wait for the glider being lifted,
lift gently.
"""
(including all subdirs and with max depth!), but only the outmost level.
There are no *-set.xml files in deeper nested dirs, and with an ever growing
number of aircraft the search just lasts too long.
Here is a patch for two bugs in the AI/multiplayer part:
1. Cannot find model file *.ac error message (was only a false message,
anything worked correctly, the model was loaded from the correct path
afterwards).
2. Often many multiplayer aircrafts are missing in the property-tree.
(but I need them for aerotowing). There is still another bug: The
property in some circumstances seems not to be cleaned up after logout
of a multiplayer. I have added a workaround for this, but I don't now,
if it 100% works (should have no side effects, just aerotow would not
work sometimes). For testing I need more traffic on the mp-server.
src/Input/input.cxx src/Main/renderer.cxx
src/Main/renderer.hxx src/Scenery/scenery.cxx
src/Scenery/scenery.hxx: Move scenery picking into the renderer.
There is most of the required data defined. Also we can better use
the pick visitor that will be needed with th upcommung panel code.
src/FDM/groundcache.cxx src/FDM/groundcache.hxx: Store the material
that was used to get the croase agl level and return that material
in case we need to make use of that croase value.
options.cxx: Olaf Flebbe: Fix some problems with --help --verbose
caused by the usage of snprintf. Elimate snprintf usage in favour
plain std::string manipulations.
data/AI/Aircraft/*/*.xml and read traffic information from these files.
Current code still mimicks old behavior by reading data/Traffic/fgtraffic.xml
The latter functionality will be disabled once we have some traffic containing
files in data/AI/Aircraft.
earth model instead of WGS84. WGS84 precision is overkill for what the
traffic manager requires, and also keeps locking up while computing
course and distance for anti podal points in New Zealand vs. south west
france.
utils/Modeller/Makefile.am src/FDM/YASim/Makefile.am:
Remove -lssg from the linker lines.
Do no longer build threedconvert. A very similar functionality
is available with osgvconv. But leave threedconvert in place
if somebody will need that ...
I found a small conspicuity in YASim. The destructor of the fdm was
never called, therefore a modification of the heli fdm (not in cvs) did
not work after reset (I tie some properties and untie them in the
destructor, but the destructor was not called and the tieing failed
after reset. I don't know if any other parts of YASim need their
destructors, at least it wastes memory.
Another small fix I have made to the turbulence.cpp. The code needed,
that (a-floor(a)) is >=0 and <1. This is analytical correct, but
numerical only for "small" values. In normal fg-operation a in this
function is always small, but with unrealistic parameters in the
aircraft config file it is not and then fg crashes (instead a crash of
the aircraft or cataputling it far away).
"bind the visibility-property of the SGSky object to a property
named /envirionment/effective-visibility-m. This property is needed to decide
if the aircraft is within clouds or not. I use this property also for the
structural icing code."
- Ground network slow-down finally works as expected
(although occasionally causing a traffic jam)
- Hold position instruction now really sets speed to zero, in addition
it actually works now for crossing and two-way traffic
- Attempt to limit execution time of ground network trace algorithm
to make performance acceptable at high-density networks
- Removed remaining terminal messages
- Various minor tweaks and clean-ups
Time/tmp.cxx Main/viewer.hxx Main/viewer.cxx Main/renderer.cxx
Get rid of an other OSGFIXME. The view matrix had some plib specials
included. The viewer is now updated for that.
a second tacan may not be likely)
- remove some dead code
- simplify <name>/<number> handling
- let a listener watch over input props and search for new channel/frequency
- allow to set channel number as one number (rather than as single digits),
as some aircraft may prefer this (the ch53 does so); this is to be set
in /instrumentation/tacan[n]/frequencies/selected-channel[0]
it was never added, which is perfectly normal when the aircraft started
out of range. (Analog to the DME sound, which doesn't have that warning
either.)
value on a property. This becomes a NaN when converted to a numeric
value, which then percolated into the C++ world where it ultimately
caused a crash in YASim's turbulence code. While converting nil to
NaN isn't *strictly* wrong, it's dangerous for this reason. Toss a
Nasal exception instead. Hopefully this won't break too much
preexisting code.
- Moved AIModels/Traffic Manager related AI functions to a new file
- Rewrote the traffic manager so that the containers use pointers to
objects instead of the objects themselves, which will allow for a
more flexible memory management.
- Rewrote parts of the airport groundnetwork code, also because the
stl containers now contain object pointers instead of the objects
themselves.
- Fixed an uninitialized iterator in the AI distance tracking code
- Fixed flawed logic in some of the traffic controller's while loops
- Added a tower controller, which paces take-off behavior of AITraffic
in a more realistic way.
- Various other minor fixes and fine tuning.
More realistic calculation of vortices at the blades and therefore
real airfoil parameters can be used now (not to be mixed up with the
vortex ring state which is still not simulated), ground effect is now
continuous e. g. at buildings, calculating of the rotor in more than 4
directions, better documentation of the airfoil parameters.
- Well I finally licked it, the clipping works great now, in 16 and 32
bpp mode, on 2d and 3d panels.
- I tried glScissors, didnt work because clipping was done in screen
co-ordinates.
- Stencil buffer methods worked great for 2d panel, but messed up 3d
panels,(depth buffer problems I think), and only worked in 32 bpp mode.
- I then tried clip planes , and so far it appears to work with no
problem, and no framerate drop like I had with the stencil buffer
method...
I'm attaching the panel.cxx file for testing...
values that were angles between the aircraft's orientation and the
global velocity vector, not the airflow velocity. So the HUD velocity
vector was wrong when the wind was non-zero. Fix that.
maintain a resonable distance from each other while taxiing on the same
route. The current code does not yet take crossing routes or aircraft
taxiing into opposite directions into account.
If there is a windows problem, look very carefully at the line termination
with a serial port monitor. It should be \r\n (CR-LF), not \n, not \r\r\n
or any other possible variant.
format. I have a Garmin 295 to test with, but so far I haven't been able
to make this work (code should compile cleanly though.) I don't know if
I've made a mistake in the protocol or if my 295 just doesn't support this.
More work on this to come.
- NEVER EVER use leading underscores for auto variables
- don't store values in auto variables for the next function call (not
even when they start with underscore :-) This fixed the TACAN
channel lookup, which was supposed to be done on channel changes only,
but was always done)
- only do frequency search if frequency has changed (this was apparently
planned, but not finished; leftover from adf.cxx?)
- don't use double as bool switch
- some minor cleanup
algorithm caused a program crash. Because there is always one waypoint more
than there are routes, the trace function should only pop_back the final route
entry at search depths of one or higher. I also added a lot of of additional
safeguarding code, due to the fact that the new trace algorithm was
apparently not as stable as I'd hoped it would be. ...
in the case of fg_init.cxx we'll only see that if the log-level is set
in preferences.xml, because command line options weren't even processed
at that time. :-/
generates a data file of aerodynamic lift and drag (and L/D) against
AoA at a specified speed and altitude through a full circle. Wrote it
to track down the YF-23 superthrust issue, but it wasn't any help.
All the forces look fine.
state. The only really obvious problem was a giant negative engine
RPM, which happened because of a lack of clamping in the engine code
combined with the YF-23's ability to actually reach speeds near the
engines _vMax value. It's not clear to me that this will fix the
superthrust issue at high AoA's, but it's an obvious bug nonetheless.
+ The wing compilation step was accidentally omitting regions that lie
between the tips and the first/last control object. That's a real
problem for wings that contain no controls, and a significant issue
for those that contain only a few. I'm stunned that this went
undetected for so long.
+ The Surface::flapLift() function was oddly returning 1.0 Newtons as
a minimum, instead of zero.
(this was the reason why the first two text lines on the splash screen
looked more blurry than the others). BTW: I played with other values
than -0.5, but this turned out to be the best already. It makes textures
sharper than 0, but not too sharp (and thus flickering).
track and is a PITA for support staff. It's this message:
Error reading properties:
Failed to open file
at /home/newbie/.fgfs/autosave.xml
(reported by SimGear XML Parser)
than tick marks, and looser (zoomed) than the other 40%. Rationale:
- this was only used in *one* tape of *one* HUD ("custom")
- it's not in the MIL-STD!
- doesn't seem very useful
- relies on integer scale values, while we now have float values in the new HUD
This feature would have had to be rewritten anyway. If someone needs it and
can come forward with a (MIL-)STD description, then it can be added to the
existing tape generator again (using a value->screen-position mapper function).
Otherwise it's simply declared dead.
(Yay, one TODO and a few FIXMEs less. ;-)
encapsulation, but a real namespace would probably be better)
- extend alignment to optionally adjust x/y, and to return absolute
l/r/b/t coordinates (as opposed to plib's relative ones!)
- implement tape gaps as per Curt's order :-)
- shuffling stuff around for fun
- add generic text adjustment and
- use it in the ladder: climb -> vert bar on the outside, numbers below line
dive -> vert bar on the inside, numbers above line
work for ground based distance separation of AIAircraft.
Traffic manager initialization related changes:
- Schedules initialize "on the fly", instead of during initialization
- Invalid routes are no longer deleted, but marked as BOGUS and ignored
- Changed loading order from a distance based prioritization to a point-
score based prioritization, resulting in a much faster establisment of
AIAircraft near the user's plane.
Preparatory work for ground-based separation of Aircraft.
- The groundnetwork findShrortestRoute function not only returns a list
of waypoints, but also a list of taxi "segments" (a.k.a. taxiways).
- The taxiway list is stored in the Flightplan, and updated everytime
a new taxi leg is created.
implications.
Fix the ladder so it "moves" around in the hud correctly based on alpha/beta
offset projected onto the horizon line so the horizon is always the horizon.
using Curt's new speed adjustment code. 2) Separated the function
FlightPlanCreateCruise() into a new source file in preparation of a more
elaborate airway following scheme.
calculations. We run the FDM at 120hz and compute how many loops can fit into each FG loop.
Floating point rounding could lead to a situation where we could end up running
1, 3, 1, 3, 1, 3... loops of the FDM when in fact we want to run 2, 2, 2, 2, 2...
If we artificially inflate ml above by a tiny amount to get the
closest integer, then subtract the integer from the original
slightly smaller value, we can get a negative remainder.
Logically this should never happen, and we definitely don't want
to carry a negative remainder over to the next iteration, so
never let the remainder go below zero.
such a box:
_____/\_____
| Booo |
|__________|
likewise with options bottom, left, right. The size can be set via option
<marker-offset> (analogous to <tape> offsets), which describes the distance
from the base to the peak. Default: 8 px
a 8 pt font (set 8 pt in preferences.xml, too)
- fix vertical alignment of digits in label and ladder (temporary
solution -- the whole font handling needs to be reviewd and fixed)
- simplify nadir and zenith (they always want to be horizontally centered
on the ladder lines, no?)
- simplify and abstract label box drawing (no need for stippled side lines)
- align text (more) correctly in label boxes
- move variable declaration near their first use (c++ style rather than c)
- rename (zenith|nadir|hat) to enable-(zenith|nadir|hat) and make them bool
(for consistency reasons)
Generally you want point sprites for performance reasons when enhanced runway
lighting (and smooth points) are activated. Most hardware doesn't
accelerate the rendering of standard smooth points, so without point sprites
you will kill your night time performance if you turn on enhanced runway
lighting.
Note that enhanced runway lighting "breaks" our clever scheme to make the
runway lighting brightness vary with the relative view angle. This means
with enhanced lighting on, all lights are equally bright no matter what
direction you view them from. So perpendicular runways are just as bright
as runways you are directly lined up with (when enhanced runway lighthing
is activated.)
You can revert to the original lighting scheme by turning off enhance runway
lights, turning off distance-attenuation, and turning off point-sprites in
the rendering options menu.
maintainable. The rules are simple (extension functions are called
*with* the lock, which must be dropped before calling naCall(), which
grabs it) but the tracking of when the lock was held was getting a
little confused. Keep a "nasal call depth" count in the subsystem to
figure out whether we are making a sub-call and thus hold the lock.
- Fix a warning about class member initialization order.
- Clear up a problem with the default autopilot behavior on the back side
of an ILS in preparation for adding a real "back course" approach mode.
and "latitude-offset" should not use a precalculated value of warp.
2) Since the values of cur_time and crrGMT are identical in the current
version of the SGTime class, the calculations of the "system", "gmt", and
"latitude" are re-evaluated and updated where necessary.
I attach 2 new files and a diff file for the associated changes to add a
“fluxgate compass†to the instrument inventory. Whist this outputs
essentially the same data as /orientation/heading-magnetic-deg, it has to
be powered, and can be made to fail. I also followed Roy’s suggestion to
generate the error properties for this instrument here rather than in
xmlauto.xml.
When this instrument is included in cvs, I intend to use it in the Hunter,
A4F Seahawk and KC135. After a bit more research, it might be appropriate
for the Spitfire and Hurricane as well. AJ would also like to use it for his
Lightning model.
autopilot with the servos off. In otherwords, the computer goes through the
motions of computing the desired behavior (pitch or roll) but doesn't actually
drive the outputs. This is potentially useful when implimenting a flight
director.
and tgt_altitude -> tgt_altitude_ft. Also fix a comment in AIBase.hxx
indicating that the altitude is in meters, even though the usage throughout the
code was most definitely feet.
- In AIMultiplayer.cxx, update the altitude_ft variable so that the altitude
is reported correctly in the entity's property subtree.
- In AIMultiplayer.cxx, compute a velocity value in kts to fill in the speed
entry in the entity's property subtree. Note, this is not an earth centered
reference speed, not an indicated speed and not a speed relative to the local
airmass (that would be much harder to do.)
the buggy ~fnt(), causing an abort() ... ;-)
(Only loaded texture fonts (*.txf) have a new'ed puFont. The built-in
pixmap fonts don't, and may, thus, not be deleted.)
each frame. However, often these values didn't change leading to bogus data
getting introduced into the computational pipeline.
This patch switches to a much more sane method for ground track computation.
Thanks to tied functions, this is only executed when the node is read. This
will be done by the old & new HUD code, the latter of which won't have a
special lon/lat mode at all. Instead it will be regular labels that point
to these properties for displaying lon/lat.
I would have liked to avoid the duplication of code (lon and lat being
basically the same thing), and to avoid using static buffers and all, but
... if anyone wants to make it prettier, go ahead.
The format is controlled by /sim/lon-lat-format (will be changed if I
find a better place).
AI aircraft are out of range or the piloted aircraft has no radar system.
These computation include range, bearing, and angular offset relative to the
piloted aircraft. This gives some external script the control the behavior
of the AI aircraft relative to the piloted aircraft without requiring a radar
system, and without requiring the AI aircraft to be within radar range.
flightplan. Such aircraft are given some initial conditions that they
fly with. They proceed on in "freeflight" mode indefinitely. For example,
there is a refueling demo where the tanker starts at 3000', 280 kts, and
in a 15 degree bank, and then continues to orbit indefinitely.
For these aircraft with no flightplan, I have added several control nodes in
controls/flight that allow a script or menu or external application to set
heading, altitude, bank angle, and speed. This permits some level of interactive
or scripted control over AI aircraft.
are taken down by the C++ runtime environment. This will later be done
with runlevels. Why would we want to run nasal code in subsystem
destructors? We don't really. But some data structures may use nasal,
which are normally created/destroyed during runtime. And these will
also be destroyed at fgfs exit. In the past things like these didn't
happen, because someone had disabled all subsystem destructors ...
src/AIModel/AIAircraft.cxx src/ATC/AILocalTraffic.cxx
src/FDM/flight.cxx src/FDM/flight.hxx src/FDM/groundcache.cxx
src/FDM/groundcache.hxx src/Main/fg_init.cxx src/Main/main.cxx
src/Scenery/hitlist.cxx src/Scenery/hitlist.hxx
src/Scenery/scenery.cxx src/Scenery/scenery.hxx
Make use of the attached SGMaterial reference userdata on scenegraph
leafs. Make the SGMaterial pointer available to the ground query
routines.
SGPropertyNode to guarded ones. This is also done for JSBSim/JSBSim.hxx,
for which JSB had given explicit permission a while ago. I postponed that
back then, but now is the time.
color group /sim/hud/palette/color[*]/ to the active group /sim/hud/color/
if they really exist. (Parameters like <antialiased> can be set in the
active group and be left alone, or set by each <palette> color group.)
into the <color> group, but that's because on HUD color changes a whole
"color" set from /sim/hud/palette/color[*] is copied to /sim/hud/color/, and
antialiasing needs to be considered with that. (I'm not entirely happy
with the property names yet.)
there's a bug that I had copied: update() checks each list node: if it
has no children, then a listener is attached. Later, when freeing the
children list, it assumed again that each node without children would
have a listener attached. This caused a crash when a node had children
before, but lost them in the meantime. Now we tried to remove a listener
where there never was one.
with an invalid path, as in getprop("/sim/model/737") or x.getNode("f:1").
Forward sg's error message to the Nasal runtime error function instead, so
you get something like:
Nasal runtime error: name must begin with alpha or '_'
at /home/m/fgfs/Base.local/Nasal/props.nas, line 30
Unfortunately, the location points to the line where the ghost wrapper
sits, rather than the offending script line.
*many* years, so the property browser always leaked memory. I activated
this line in property_list.cxx and ... got a crash right there. So this
was the reason for it being commented out? Doing the same for now, until
I know the exact reason and can really fix it.
"Bug Fix - amend the code so that JSBSIm can have more than one tanker in
the environment at the same time. A nasal script has to be added to each
aar-capable JSBSim model to complete this fix."
- backport submissions for plib 1.8.5:
* set slider size correctly
* remove slider/arrow when all entries fit into the view
* don't allow to scroll off the list
Unfortunately, there's no simple way to distinguish them. plib has no
user defined widget classes, and getTypeString() -- which could be used
for that -- isn't virtual. Sigh. I'll discuss the problem on the plib list.
For now I can only offer an ugly workaround. (Don't look closely!)
from plib's file-picker, where it made some sense to keep the current path as
string, and to chop off elements when leaving a dir, and adding them when
entering. But it doesn't make the least sense in SGPropertyNode space, where
we already have everything to move in a tree.
- add R & W flags for TRACE_READ and TRACE_WRITE. Remember: lower case letters:
disabled (rw ... reading/writing), upper case letters: enabled (RWAUT)
- remove some verbosity & further cleanup ... to make further work easier :-)
"Add Air to Air TACAN and User-User refuelling over the Multiplayer Network.
With this change, your TACAN instrument can be tuned to the channel of a
Multiplayer ac. It also activates fuel flow between User and User aircraft
when they are less than 50 ft apart. To participate in multiplayer as a
tanker, all you require to do is to use the callsign MOBIL* (where * is some
number) on the net. Only MOBIL1, MOBIL2 and MOBIL3 have been assigned TACAN
channels, but any MOBIL callsign will be able to give fuel."
- PropertyObject: remove additional "values" member again
- don't create entry lists for <list>, <select>, and <combo> at dialog
creation and delete them on dialog close, but let a separate class
fgValueList handle this. The three widgets are now subclassed and the
derived widget lets fgValueList manage the lists
- make <select> consistent with <list>. This breaks backwards
compatibility, but not a single dialog in fgfs uses it and did so
since ... forever. (Shoot me!)
Rationale: now that dialogs are a bit more dynamic than they used to be
(thanks to embedded Nasal), we have to delete and recreate entry lists
during dialog use. Deleting only at dialog closing doesn't cut it anymore.
Especially list widgets that are updated several times per second would
use up a lot of memory otherwise. The route-manager doesn't update that
often, but it did already leak. One TODO less. :-)
"Preparations for an upgrade to Air-to-Air Refuelling to allow more than one
tanker in the environment at a time. This will only work with YASim models.
JSBSim models are unaffected by this change."
The ufo sets this to a very low value, "serious" aircraft (which don't want this
unrealistic automatism at all) set it to a very high value, and those that don't
care ... don't need to care.
signals, this is meant for attaching listeners. The ufo will use that to
hide/reveal the status line in screenshots. The following signal properties
are now available:
/sim/signals/exit ... set to 1 right before quitting
/sim/signals/reinit ... set to 1 on re-init (Shift-Esc)
/sim/signals/screenshot ... set to 1 before and to 0 after screenshot
/sim/signals/click ... set to 1 after mouse clicks at terrain, signalling
that the geo coords in /sim/input/click/ were updated
I've got some updates for the soaring scenario that will make for a more
realistic (and fun) experience. They are:
1) A cap cloud, which will sit atop each thermal
2) A thermal scenario with wide coverage around KSFO, and using cap clouds
3) A one-line change to AIThermal.cxx to position cap cloud properly
4) Schweizer 2-33 set file change to match cloud coverage with thermal
heights.
files:
1) data/Models/Geometry/thermalcap.ac
2) data/Models/Geometry/thermalcap.xml
3) data/Models/Geometry/thermal_cap.rgb
4) data/AI/thermal_demo.xml
5) data/Aircraft/sgs233/sgs233-set.xml
6) source/src/AIModel/AIThermal.cxx
*** or, if you prefer diffs ***
7) aimodel.diff
only used by the <list> widget. It allows to "dialog-update" the list,
which rescans the <value> children and redraws the list widget with new
contents. The old contents are only freed at dialog close, which should
eventually get changed.
two almost identical functions for these methods. It only forces to repeat
the redundancy for every small change to either.
- abstract out generation and destruction of plib string arrays
- abstract out generation of lists from <value> children
used in dialog.cxx to allow XML dialogs access to their own prop tree via
Nasal's cmdarg(). That way dialogs can generate dynamic content, such as
list entries.
- only call globals->set_initial_waypoints() if the waypoints list address
has actually changed, that is: if it has just been initialized
- remove trailing spaces
- fix indentation
but got changed so that Nasal listeners wouldn't be triggered needlessly.
Doesn't make sense, though, as Nasal will never be available before the
video size is set, and it prevents the window interface from setting the
startup size.)
"Add Air to Air TACAN. With this facility TACAN equipped aircraft can
measure the range and bearing of TACAN equipped AI Aircraft. ATM there is
only one assigned - callsign ESSO1 on TACAN channel 039X, but this can be
easily expanded to include other c/s channel # pairs - just ask me if you
want more."
list) and the arrows are clicked (patch sent to plib; workaround it to
be removed once fgfs officially depends on a plib version that includes
the fix)
- fix (very unlikely) crash in case the widget is redrawn between list
destruction and setting of the new list.
even be more than once in the same list. We need to remove all such instances,
or the a pointer to TowerPlaneRec may become invalid and cause crashes.
The proper fix would, of course, be to be careful with state changes and
to prevent *any* duplication of entries. [OK'ed by David]
colors: <color-{{back,fore}ground,highlight,label,legend,misc,editfield}>
<input-misc>, for example, sets the input field cursor color, <input-legend>
the input field text color. (This feature was always planned as part of the
'theming' capabilities, and most code is already in place. Only this line
was apparently fogotten. :-)
a crash when using the model manager from XML files (which apparently
nobody does, anyway ;-) Now those models work (again), but have no
shadows. Those placed at runtime (e.g. via ufo) still have a shadow.
<property>, except if they are activated, in which case the user input
should, of course, not get overwritten. But if such an input was active and
the user selected a different widget, then its contents were dropped.
Fix that by setting the "DownCallback" for live input fields.
Here is one patch that to make FlightGear run without floating point
exceptions on FreeBSD. Apparently, if we do not ignore floating point
exceptions per this patch, there is some occasional condition where the
nvidia driver is involved in delivering spurious floating point exceptions
to the fgfs process, causing it to core-dump occasionally without the patch.
With only this patch, FlightGear will compile and run properly on
FreeBSD 6.X as long as the nvidia accelerated driver is installed,
modulo proper switches to the SimGear and FlightGear configure script
executions.
Again, kudos to your team for the great work on the big release
push; it is super to see things come together like this!
- reduce it to 20 (30 is excessive and didn't match the property brower look)
- call puSlider with this size explicitly (otherwise its size is derived
from the font size, unlike the arrow buttons!)
respected, and black text on dark grey is a bit hard to read).
TODO: - submit that for inclusion in plib's puAuxList
- drop custom version and use plib's (after 0.9.10)
I had inadvertently terminated a data line when reaching a tab character after
initial data was supplied. I tested the lightning file and it now appears to
read in correctly.
entry was selected. Return 0 in this case, not an invalid string address
(causing segfaults).
dialogs.cxx: don't set property if no list entry was chosen.
When AIFlightPlanCreateTaxi() function is called with the firstFlight
argument set to true, this is supposed to handle situations where the
the aircraft's timetable indicates it should have left between about 5 to
20 minutes earlier. In the previous version, all these aircraft started
taxiing from the first parking location available in the network, due
to the fact that the variable gateId was not assigned a value. In this
patch, route tracing starts from an assigned gate and the network node
following code is fast forwarded to a random location along the taxiways
to give a more realistic and natural distribution of taxiing aircraft
after startup.
This patch further addresses some weird ballet-dancing behavior that
aircraft were showing just prior to/right after parking and which was
related to a number of more or less duplicate waypoints in the transition
from createTaxi() to createParking() to createPushBack() to createTaxi().
Finally, a blatant typing error in the getParking() function was fixed.
at (lon, lat) coordinates -1000,0. This patch fixes the AIModels/Traffic
Manager side of things. The AIModels subsystems allowed the creation of
AIAircraft with non-existent 3D models. If such a model didn't exist, the
aip class didn't get initialized, resulting in the above-mentioned bogus
position information. Here I circumvent this problem by a) only interacting
with the tile loader if the model is visible (and hence has succesfully been
initialized) and b) by disallowing the traffic manager to create AIAircraft
objects if the path to the 3D model doesn't exist.
bunch of memory leaks that had accumulated over the years. FlightGear
doesn't currently bother to destroy and recreate a YASim context, but
at least it can do so now without worry.
groundcache addition -- the ground callback doesn't do anything at
solution time, so the ground plane was unset. Valgrind was whining
about this; it's not clear that it was actually causing a problem.
a race condition ending in warping twice and having huge increments for the
second warp.
I am not aware of such a flush function in glut. So we emulate that by
ignoring mouse move events between a warp mouse and the next frame.
That should make glut behavour aequivalent to sdl behavour.
This isn't the case if the model is destroyed on fgfs exit. To make <unload>
work under these circumstances, one would have to reorder subsystem removal,
but this doesn't seem overly useful, so we'll do it when we really need it.
aircraft models this is only called if they are loaded as AI, not if they
are the model flown by the human pilot. This has technical reasons (too
soon for Nasal/fg), but is useful to distinguish AI and non-AI use, for
example to set a different livery for AI models, or to set different
animation properties.
implement FGNasalModelData class for execution of XML <load> and <unload>
scripts. modelLoaded() is called by the model loader, and the destructor
on branch removal.
modelmgr.cxx:
tilemgr.cxx:
tileentry.[ch]xx:
make scenery and custom objects run their Nasal scripts on loading
and unloading. Let OBJECT_STATIC object not be cached.
<nasal>
<open>print("I'm called on dialog open")</open>
<close>print("I'm called on dialog close")</close>
</nasal>
All Nasal runs in a dialog namespace, so that variables and functions
defined in the <open> block can be used in <binding>s, etc. This is
especially useful for <radio> button handling. See "location-in-air.xml".
mf:
pthread_cancel doesn't seem to work correctly on all supported platforms.
It apparently causes SGBlockingQueue::pop() to correctly leave the thread on
the cancellation point pthread_wait(), but the SGGuard() destructor isn't
called, so the queue mutex remains locked. This triggered an assert() on
pthread_join(). This patch uses an empty ICAO request as signal for the
thread to terminate itself.
I have implemented a Honeywell MK VIII EGPWS emulation for FlightGear.
The MK VIII is an Enhanced Ground Proximity Warning System aimed at
regional turboprop and small turbofan aircrafts such as the Citation,
Citation Bravo, B1900D, Beechcraft 99 and L410.
Frederic Bouvier:
make the MSVC compilation possible. Rearrange base package directories.
The original code selected the most preferable runway combination,
regardless of which combination was currently active. This patch
builds in some additional resistance against change, by keeping
track of which runways are already in use, and forces a change
in active runways only when new (wheather/time of day) conditions
force it to do so, resulting in much more consistent runway assignment.
behavior.
and in the calculation of the launchbar angle (by Vivian).
It also calculates the holdback angle, and sets a Boolean value which
can be used to initiate the release of the catapult strop submodel at
the appropriate moment (new code by Vivian).
control to piston engines that allows external scripts to control the
turbo/supercharger boost programatically by setting this axis to
values in the range [0:1]. It also adds a "turbo-lag" attribute (a
time in seconds) to engines implementing turbocharger spooling delays.
This isn't terribly well tested, but doesn't seem to have broken
anything.
I am attaching a trivial patch that changes the normalization from 24 to
12 in turn_indicator.cxx. With this change, the pa24 tc has a turn
indicator spin value in the property tree of 0.9996 and the same value
for the pa28-161 is 1.0, so there is no harm to a 24 volt electrical
system in this change. Should the battery or alternator put out a lower
voltage than 12 volts, the spin value goes down and the tc shows a
negative turn that increases as the voltage gets less. This file shows
you as the author. If you are comfortable with this change, commit it
to cvs and the tc will be correct even for 12 volt systems.
propeller pitch stops for constant speed propellers. The default
values are the same as the previous hard-coded values. The new
attributes, "fine-stop" and "coarse-stop", are documented in the base
package, Docs/README.yasim.
- remove cleanup handler that unlocks unused mutex
- make the result_queue a locking queue (blocking is only done in the
pop() anyway, and this isn't used in the thread at all)
- don't disallow thread cancelling in the request_queue's pop(), which
is the only cancellation point in this thread
This patch makes use of the vectors now available in simgear with that past
patch. And using that it simplyfies the carrier code somehow.
- Small additional factory's to the quaternion code are done in the simgear
part. Also more explicit unit names in the factory functions.
- The flightgear part makes use of them and simplyfies some computations
especially in the carrier code.
- The data part fixes the coordinate frames I used for the park positions in
the carrier to match the usual ones. I believed that I had done so, but it
was definitly different. Also there are more parking positions avaliable now.
The new multiplayer patch with an extension to transmit some properties with
the base package. The properties are transmitted in a way that will not
immediately brake the packet format if we need new ones.
Even if the maxmimum number needs to be limited somehow, that format might
work well until we have an improoved packet format which is even more compact
and that does not require to retransmit redundant information with each
packet.
That part is relatively fresh and based on that what Oliver provides on his
multiplayer server web page.
The properties are transferred to the client and I have modified the seahawks
rudder animation property to use a relative property path to verify that it
works appart from the fact that you can see it changing in the property
browser.
The movement is still a bit jerky, but that can be fixed/tuned later without
again braking the packet format.
This patch makes FlightGear at least compile on MSVC. I hope I have removed
reference of my other local changes. DSP and DSW files are included for
reference. They have been reconstructed with am2dsp.pl. I had to introduce a
change to am2dsp because of the need of filenames with embedded spaces. (Yuck)
The major direction is to remove clutter like the _USE_MATH_DEFINES and have it
on the compiler command line sice there is no central include file. You will
have to put it on the command line for your locale Project files, if it not
there, already. I added the _CRT_SECURE_NO_DEPRECATE define for 2005, since it
does no harm to other VC version.
the mouse pointer to a new position. Otherwise it can happen that the new
position is first set, but then come a few still unprocessed events for the
old position. This makes ugly jumps in mouse view mode.
the mouse rather than wrapping it. Wrapping around to the other side
of the screen has very bad consequences when using the mouse for
flying or viewing -- it can result in sudden jumps in the controls or
the viewpoint when the mouse jumps to another side of the screen.
Right now, the mouse is constrained to stay between 25% and 75% of the
screen on both the X and Y axis -- whenever it hits an edge, it jumps
back to the centre of the screen again (which causes no control or
view jump).
or write to the color properties in /sim/screen/. If this Nasal/GUI
implementation turns out to be too slow, we'll write a generic OpenGL/plib
version simliar to the ATCdisplay code. (OK'ed by Andy and Stuart)
or write to the color properties in /sim/screen/. If this Nasal/GUI
implementation turns out to be too slow, we'll write a generic OpenGL/plib
version simliar to the ATCdisplay code. (OK'ed by Andy and Stuart)
or write to the color properties in /sim/screen/. If this Nasal/GUI
implementation turns out to be too slow, we'll write a generic OpenGL/plib
version simliar to the ATCdisplay code. (OK'ed by Andy and Stuart)
scripts that load/write user specific data that shouldn't go to PWD, and
can't go to $FG_ROOT (due to permissions and clean separation of 'official'
data and local modifications)
right corner, not those that are result of centering a dialog if no x/y are
given. This centers screen.log messages correctly. But maybe we have to
rethink that special meaning of negative coords altogether.
This patch removes some useless indirection when creating AIModels. It
obsolets AIScenario*.
AIEntities are just an intermediate copy of an other intermediate copy of an
xml file on the way from the ai scenario configuration file to the AIModels.
As such the AImodels can now be created directly from the property tree read
from the scenario file.
This reduces the amount of work needed to add an other AIModel and reduces the
amount of copy operations done during initialization.
It also moves internal knowledge of special AI models into these special AI
models class instead of spreading that into the whole AIModel subdirectory
which in turn enables to use carrier internal data structures for carrier
internal data ...
Also some unused variables are removed from the AIModel classes.
I believe that there are still more of them, but that is what I stumbled
accross ...
Tested, like the other splitouts these days in a seperate tree and using the
autopilot for some time, and in this case with a carrier start ...
problems because a lot of people already have their *real* preferences
set in ~/.fgfs/preferences.xml (and don't want fgfs to stomp over them),
because the name doesn't tell people that their data aren't save there
(comments!), and because this is inconsistent with the global preferences.xml
file, where user changes *are* respected.
This patch is a combined effort by Gregor Richards, Oliver Schroeder, and
Vivian Meazza (and code cleanups and improvements by Erik Hofman). It corrects
the bug in which a Multiplayer model responds to local inputs, and the view
number bug which caused certain aircraft to appear as cockpit only models. It
passes remote properties over the net, and all major control surfaces and gear
are now animated correctly, providing that the local ~model.xml file contains
no leading "/" in the <property></property> data entries. MP objects
are now extrapolated using 1st and 2nd derivatives to make their movement
appear more smooth. The sim is now halted while a new client joins the net.
Known problems with MP are non-display of the remote client under certain
circumstances of starting/resetting, and a freeze on starting. These bugs are
long standing, and are not addressed by this patch.
Special thanks must go to AJ Macleod for his patient testing of this patch over many evenings.
We have also moved part of multiplayer into AIModels as part of the ongoing
development of MP.
because a dialog button can get pressed when its callback isn't available
any more. Ideally, we would close the dialog or update its buttons when
this happens. But this requires bigger changes.
/sim/messages/{atc,pilot,ai-plane,ground,approach}
These can the be used for differenct screen.log colors and for different
voices. (Aircraft & tutoruals may want to write to /sim/messages/copilot)
Fix the current buggy rain orientation behaviour for the views attached to the
aircraft (while still inheriting bugs with the views attached to anything else).
I had massive problems with tower.cxx, so I decided to doublecheck all
containers and iterators in order and found lot of potential problems.
Now I can fly with "debug on" of KSFO for minutes without problems.
The fix for AIMgr is from Mathias, but I reworked it. So blame me, not him.
- Feet to meter conversion mistake (in AI getGround elev)
- Improved ground following code (not yet perfect, but for now no one will
notice it within the marginal altitiude differences at the taxitrack or
runway)
- Exclusion of the "AI" directory witihin data/Aircraft in
main/init/fgSearchAircraft, to prevent AI aircraft to be picked up by the
aircraft search function
Jon Stockill wrote:
> I've just discovered that when using the null fdm I'm not getting
> updates to /position/ground-elev-m any more. So I can't actually
> retrieve the terrain elevation. Is there somewhere else in the property
> tree I could read this from?
The attached patch fixes this problem.
This patch limits the maximum simtime we do simulation computations for.
That is highly sensible if you run flightgear in valgrind or some realy slow
debug build. In such a case it is possible that flightgear gets totally
unresponsible, because simulation time might increase slower than real time.
That patch introduces a maximum simulation time per rendered frame to limit
that effect.
If the property /sim/max-simtime-per-frame is set to something strictly
positive, the simulation time is limited to that value.
The default is unchanged - no limit.
Anyway, from the point of view of gui responsiveness and responsiveness to
realtime controls like joystick inputs it might be a good idea to limit that
by default to say 1 second. If you have less than 1fps, flightgear is
unplayable anyway and I believe we do not longer need to care for realtime
correctness for that case ...
though the window wasn't resized. I'm just not adventurous enough for
a cleaner solution in the light of the upcoming release. At least the
xsize/ysize properties aren't set each frame any more, so listeners
work now properly.
Incorporating the shared ptr code:
- All scenegraph references from SimGear
- SGMaterial which already had a reference counter uses now that common
infrastructure.
- SGMatModel is now counted.
- SGSoundSample from SimGear
- And the corresponding change for the sound samples in flightgear which fixes
a latent crash if FGBeacon would evern be deleted.
Erik Hofman:
This patch contains an update to net_ctrls.hxx that adds an extra 100 bytes
(or an equivalent of 25 (u)int32_t types) of reserved space. This could be
used to make the protocol forward and backward compatibel within a certain
scope. Be sure to read the instructions at the begining of the header file
when addinf new variables.
"play-audio-function" command. This function can be called from internal
code, from nasal scripts, or from external scripts to play a single one-off
wav file. File/audio data is loaded and unloaded on the fly automatically.
Create a queue of one-off wav files. Calling layer can request the system
to play any wav file. The request is thrown at the end of a play queue.
The queue is serviced sequentially so that queued wav files will no longer
overlap. When a sample is finished playing. It is removed from the queue
and deleted from memory. The next remaining request in the queue is then
played.
- Provide a Nasal interface to display simple text messages on the screen
like the ATC display. In fact, I copied the code from the ATCDisplay.cxx
and simply shifted it further down the screen.
Erik:
TODO: Integrate the two pieces of code.
anything in the nav tree is valid or not.
- Fix an order problem between caching data values and searching for a new
station that could cause odd and unexpected and hard to reproduce results.
Added a convenience function to estimate the time to intercept the selected
radial give the current heading and speed. This can be useful to a flight
directory to compute the point to switch from armed to coupled mode at just
the right time so the pilot can roll out onto the desired heading on the
desired radial.
Add a first whack at estimating a ground track heading error (difference
between aircraft heading and ground track directon.) This needs more work
and testing.
The prototype of update_metar_properties does not match overridden func.
trafficmgr: iterators below begin() and after end().
tower.cxx : iterator incrementing beyond end().
replaced with efficient listener callbacks. One use is the new FPS display.
This is reviewed and OK'ed by Andy, relatively trivial and separated from
the rest of Nasal, so problems are quite unlikely and confined to users of
this function.
The callback is executed whenever the property is written to -- even if
the value didn't change. The triggering Node is available via cmdarg().
Examples: _setlistener("/sim/crashed", func {print("haha!")});
_setlistener("/foo/bar", func { print(cmdarg().getPath() ~ " changed")})
it's also possible to enable/disable menu/item entries with higher numbers.
This can be useful for adding entries from other config files (aircraft
specific or local). I'd say aircraft files can use indices starting with
[100] and local files starting with [1000]. Such high number will never
collide with an entry in menubar.xml, even if entries are added/removed
there.
Display the ground intersection point on mouse click (if click not consumed
by the gui or the panel.) This should eventually get stuffed into the
property tree.
Computes the pick direction and starting point. This is code that translates
a screen coordinate into a vector in the FlightGear world (between the eye and
the on-screen coordinate.) Armed with this vector in FG world coordinates,
you could call a scenery intersection routine and lookup the lon/lat/elev of
the point in the world that was clicked on.
* in some cases more specific sg exception types were used in place
of the more generic one, e.g., sg_io_exception instead of sg_exception
when the context of the error was an IO error
* in some cases, the error message was made more specific
* minor style fix for exception rethrowing --- using throw; whenever
a re-throw is made; sometimes optimizing away the exception symbol name
in the catch handler at all
* more specific catch handlers added in some places -- e.g.,
an sg_io_exception caught ahead of sg_exception
- fix indentation (there were 2, 3, 4, 7(!) space indents as well as tab
indents, all mixed together)
- no code changes, except one "if (foo) {}" changed to "if (!foo) return; ..."
Unfortunately, we don't have an easy way to access the puObjects
only by knowing the respective XML property node, because the
menu structure was built by plib from string lists. That's why
we walk the puMenuBar tree and store {property node}->{puObject*}
pairs in a map. With this infrastructure in place we can now
easily enable/disable entries, but we can also make other changes
to menu buttons as we see need. The structure of puMenuBar is
described in the pui documentation, so it's less of a hack than
it looks. :-)
remove a hack and do it properly: if the requested elevation is for some
reason below the surface and the intersection test fails (as it appears
to be the case in EGLL), try again from 10000m ASL
mf: typos
Insert empty string as marker between FG_SCENERY path elements.
FG_SCENERY=A:B expands to [A/Terrain, A/Objects, "", B/Terrain, B/Objects, ""]
(assuming that both A/ and B/ have Terrain/ and Objects/ subdirs).
tileentry.cxx -- FGTileEntry::load():
Check all tile dirs in FG_SCENERY from left to right: add all objects
to the scenery until a terrain tile was found: In this case read the
rest of that group (i.e. the Objects/ twin dir) and then stop scanning.
Better structuring of log messages & fix warnings.
sea tile, and finally process the objects. This guarantees that all objects
are placed relative to a valid tile center, rather than to the origin (0/0/0).
This is important for objects in sea tiles, and allows to display objects
of *.stg files that came sooner in FG_SCENERY.
This was the reason why some people (especially SuSE10.0/gcc 4.0.2
users) couldn't see others in MP. I don't even know why I'm committing
that. It's less important than taxi lights ...
metar fetcher. Effectively this caused the metar thread and the main
thread to both attempt to fetch weather data. This could lead to long pauses
when the main thread decided to fetch the weather, and introduced a race
condition that could cause a segfault/crash.
Investigating this issue, I discovered that even longer ago, someone confused
#defines and #ifdef symbols with C/C++ variables. If I #define XYZ 0 it is
defined so #ifdef XYZ is true, not false like a variable. Our thread
detection made this mistake and there were follow up patches to work around
it.
So I fixed the configure script (ahhh, reading the autoconf manual is highly
recommended excercise for people editing the configure.ac file.) I also
discovered that we were hardwiring with_threads=yes with no way via configure
options to disable threads from the build so I fixed that.
Then I patched up the #ifdef's scattered through the code to match the
configure script changes, oh and by the way, I stumbled upon a past typo
that led to the race condition in the metar fetching thread and fixed that.
Here's a fix for a bug I introduced when I updated the AIStorm with
turbulence. The change I made to the FGAIEntity struct was overriding the
thermal <strength-fps> data.
too old (wrong system time or broken proxy): stops after 10 stale reports
were fetched in a row. This should simply stop further fetching, but due
to a bug in the threading system(?) it does currently lead to abortion,
just like any other exception in the fetcher.
each other out. The problem is this: if we press, for example, "Ctrl-a", but
release the "Ctrl" modifier button *before* the "a" button (which nobody does
intentionally, but which happens all the time), then we don't get the RELEASE
signal on "Ctrl-a" (keycode 1), but on the "a" (79). But "a" hasn't been
pressed, so the signal is dropped. And who releases "Ctrl-a"? Nobody!
So the next PRESSED signal for "Ctrl-a" is ignored, too. It is still
"pressed" after all, isn't it? That's the reason for the occasional
non-functioning of keys.
Due to the nearing 0.9.9 release, I only commit a crude last-minute fix.
It's not as intrusive as it looks, and shouldn't be "dangerous" at all.
It only makes sure that when we get an unexpected RELEASE for one letter
key ("a") that the two twins "A" and "Ctrl-A" are released if they are
still in "pressed" state.
The proper fix will be to let fg_os{,_sdl}.cxx always report presses on the
same key ("a", "Shift-a", "Ctrl-a", "Alt-a", and other combinations of
modifiers) as the *same* key (97), only with modifiers appropriately set.
are sharp, as intended. These were are never seen in practice; I
found the problem while looking at 360 degree lift curve graphs
looking for discontinuities.
to pop themselves down while the simulator is paused.
The problem was with the "real time" queue in the event manager,
causing the third argument of Nasal's settimer() (a flag for "sim
time") to be ignored. Inverts the default sense of the argument, as
there are lots of uses of settimer() in the current code, almost none
of which want to use real time.
Note this fix introduces a header file incompatibility in SimGear --
be sure to update.
to other color than "Yeukky Pink"; #undef'ed for older plib versions; plib
patch will be made available in case fgfs 0.9.9 is released before plib 0.8.5
redraw(): redraw gui without distroying dialogs (fgcommand "gui-redaw"/Shift-F10)
This change makes sure that Nasal-generated and dynamic dialogs can be
re-opened correctly when cycling through themes.
Take any arbitrary vector (not necessarily vertical) and intersect it with
the current set of loaded terrain tiles. Returns lon, lat, elev. This
could have a multitude of useful applications such as testing line of sight
between two objects, faking a terrain following lookahead radar system,
virtual georeferencing, etc.
because this creates an empty entry if it didn't exist. This made the
activation of the dialog mandatory before the next gui subsystem update()
happened. Otherwise fgfs segfaulted.
right/upper screen edge (analogous to the --geometry spec), assuming
that we never want to draw outside the screen area; for this to work
we need to write the original x/y coords back to overwrite the absolute,
positive values that the layouter stored there
"jitter" when the aircraft was stopped. This is a fundamental
characteristic of the gear model, and can't be fixed without major
surgery (and not a small amount of blinding insight). But we can at
least clamp it so the value can't change unless the wheel is moving
with a nontrivial velocity (5cm/sec in this case).
property (e.g. <keynum>49</keynum>). The numbers are the same as in
keyboard.xml. (Could later be replaced/enhanced with <key>Ctrl-a</key>
notation.) This does, of course, only work for widgets with assigned
bindings.
there was the situation where four directories contained jst two files,
of which three directories were aircraft related, and one directory contained
test code from Curt that might be better of in SimGear anyhow.
This is just a patch to move a bunch of files to new locations. In case of
local changes to any of them you can do the following:
move replay.[ch]xx from src/Replay to src/Aircraft
move control.[ch]xx from src/Control to src/Aircraft
move ssgEntityArray.[ch]xx from src/Objects to simgear/screen
In addition it has been decided only to use .[ch]xx files in all directories
unless it's contained within an FDM specific directory, in which case the
author is free to do whatever (s)he wants.
In this repspect the following files have been renamed in src/Multiplayer:
tiny_xdr.[ch]pp has become tiny_xdr.[ch]xx
multiplaymgr.[ch]pp has become multiplaymgr.[ch]xx
"the model is deref'd and deleted when the refcount is null *but* it is
still referenced in the ai model list, so next time you ask for it you will
have a reference on something deleted"
and text strings are filled in before displaying. For testing: the new
dialogs are available under menu -> ATC -> Frequencies, and when
communicating with ATC (' key). This isn't completely finished yet, and
will probably profit from some feedback from the ATC folks.
tower.cxx: remove redundant "if (foo) delete foo".
I tried to make sure accessor functions which return by reference act
on const objects. also replaced some iterators with const_iterator
and a few return/pass by reference that were missed the first time
around.
* Use "const string&" rather than "string" in function calls when appropriate.
* Use "const Point3D&" instead of "Pint3D" in function calls when appropriate.
* Improved course calculation in calc_gc_course_dist()
* Safer thread handling code.
Vassilii Khachaturov:
Dont use "const Point3D&" for return types unless you're absolutely sure.
Erik Hofman:
* Use SGD_(2)PI(_[24]) as defined in simgear/constants.h rather than
calculating it by hand every time.
this patch eliminates some cut-and-paste,
as well as makes some frequently used strings const static at the same
time. A couple of interfaces are decorated with 'const' on the parameters
that are such, in line with other such interfaces where const is used.
"NINE" changed to "NINER", to match ICAO practice and the current FGFS
voice data.
A fixed buffer, sprintf and a warning comment replaced w/ostringstream.
Alex Romosan:
+string ConvertRwyNumToSpokenString(const string s) {
this should be string ConvertRwyNumToSpokenString(const string& s)
so we don't make unnecessary copies.
it isn't there, this is a bug. Thus centralize the error message so that it
doesn't have to be repeated everywhere. Of course, the calling code should
still consider that a returned property node may be 0.
I found that all the current users of the companion
function, findByFreq() actually did assume radians despite the misleading
comment in the .hxx and .cxx saying it's degrees. I've fixed the
comment now, and no longer change the Navaids code. The new Navaids user
in NewWaypoint() is now passing radians to the findByIdent().
Note that along with fixing the comments in the navlist.hxx, I removed
an obsolete method findByLoc() declaration (there is no definition
anywhere).
CygWin/gcc-3.4.4 updates.
I replaced my cygwin compiler with 3.4.4, did a make clean of plib, simgear,
and flightgear, then did a make install of all three. With the included changes,
everything builds fine, and runs fine.
or data blocks) from layouter and dialog creator. This is required for
dynamically generated/modified dialogs. Parts in the XML file can be
hidden and turned on by the C++ code. Other hidden parts can be used
as templates that are multiply used. Hidden datablocks can contain
strings that are used in dialog context, that are easier to translate
or modify in the XML file.
Attached is a patch to add oil temperature to the YASim piston engine
model. This brings to life one of the pa28-161's otherwise 'dead'
guages. It's a pretty simple 'model' based on temperatures and warmup
times I've observed in the labs on auto engines and run through my
dodgy-memory filter. It does the job of populating the guage with
something plausible though.
Auf Niederlandisch:
Bij deze de patch voor de taxiway code. Deze code is nog gebaseerd
op de bestaaande architectuur, gebaseerd op de FGAirport class in simple.[ch]xx
Ik heb me voornamelijk gericht op nieuwe functionaliteit; de volgende
submissie zal waarschijnlijk bestaan uit opschoning, opsplitsing en een
implementatie van de nieuwe airport architectuur, zoals voorgesteld door
David Luff.
En Anglais:
Here is the patch for the taxiway code. This code is still based on the
exsisting architecture, which is based on the FGAirport class in simple.[ch]xx
I've aimed mostly at new functionality; The next batch will probably contain
code cleanups, splitups and the implementation fo the new airport architecture,
as proposed by David Luff.
I have corrected a few bugs with the owner draw gauge, weather radar code and heat-haze effect.
- od_gauge.cxx :
corrected a rendering bug where the generated texture was only visible
from a certain angle or distance ;
corrected the search of textures inside the aircraft scene graph ;
- wxRadar.cxx :
the echo of clouds was lost when the pilot was not looking in the
plane direction ;
Using new gcc 4.0 I have some serios warnings about uninitialized
variables, that are used. I created a patch, but I have no idea if it
is possible to do it my way. Can you check this out please?
Erik: I've modified the patch slightly based on the contents of an older
version of hitlist.cxx. I think this is correct now.
modeling of a simple single vacuum system with a pump source on each engine
in a multiengine aircraft. The highest rpm engine takes priority for driving
the vacuum system.
I had a quick view over the ssgBase::ref() calls in flightgear.
I made them all symmetric and used ssgDeRefDelete to dereference them.
This has the basic advantage that ssgDeRefDelete additionaly deletes the
memory instead of just decrementing the reference cound without deletion ...
This includes an incorrect deref instead of a ssgDeRefDelete in the placement
transform registration I introduced earlier. I believe that this causes the
problems with long flights (unverified, but with a big propability).
it for the B-29). The gear model itself has supported this always,
but there was no interface from the XML file. Should be backwards
compatible. I don't think I broke anything...
I have done a valgrind run in flightgear. Just start it up and close it at the
fist change I had about half an hour later.
source-leak.diff:
Also two minor ones, but leaks ...
I stumbled across two memory errors with two wrong const references to
std::string.
As I fixed that, I also moved aircraft_dir which is only used from UIUC into
UIUC. With that uiuc_aircraftdir.h is empty and can be removed.
I believe I have found the agl hud problems as well as the 'hole' in the
carrier's deck. I spent half the day to reproduce that problem, it did not
occure when you start on the carrier not does it occure with JSBSim and my
really often used testaircraft. So I really need to improove my helicopter
flying qualities.
I was under the impression that *all* FDM's call
FGInterface::updateGeo*Position(..)
so set the new position in the FDM interface. Therefore I had added at the
some code that updates the scenery elevation below the aircraft to *those*
functions.
Ok, not all FDM's do so :/
The attached patch factors out a function computing the scenery altitude at
the current FDM's position. This function is also used in those FDM's which
need to update this value themselves.
Also this patch restores the nearplane setting and uses the current views
altitude instead of the current aircrafts. I think that this should further
be changed to the eypoint's agl in the future.
The agl is again ok in YASim's hud.
Changes
=======
- acmodel.cxx :
we now have an optional new property (/sim/model/texture-path) that is used
as the first path in wich aircraft textures are searched. If textures are not
found there then the usual texture path or model path is used ;
This allows to replace only needed textures for liveries ;
- options.cxx :
added a new --livery=xxx option for the user pleasure ;
this will just set the /sim/model/texture-path property with /livery/xxxx
- od_gauge.cxx, og_gauge.hxx, cockpit.cxx, cockpit.hxx,
generic-instrumentation.xml :
added an helper class that contain a rendering context for glass instrument
or any other opengl drawn instrument ;
- wxradar.cxx, instrument_mgr.cxx, wxradar.hxx :
first experimentation of a weather radar ;
This adds a TACAN instrument to the inventory. Range and bearing are calculated
to the TACAN or VORTAC beacon selected by means of the Channel Selector in the E
quipment/Radio pull-down menu.
A TACAN beacon has also been added to the aircraft carrier Nimitz (channel #029Y
).
I've prepared a patch as suggested by Hans-Georg Wunder and Jeff McBride.
In addition I've removed the ability to completely leave out the integral
action by setting Ti to zero. The velocity form of the PID algorithm _needs_
the integral action.
Attached is a patch to the airport data storage that I would like committed
after review if acceptable. Currently the storage of airports mapped by ID
is by locally created objects - about 12 Meg or so created on the stack if
I am not mistaken. I've changed this to creating the airports on the heap,
and storing pointers to them - see FGAirportList.add(...) in
src/Airports/simple.cxx. I believe that this is probably better practice,
and it's certainly cured some strange problems I was seeing when accessing
the airport data with some gps unit code. Changes resulting from this have
cascaded through a few files which access the data - 11 files are modified
in all. Melchior and Durk - you might want to test this and shout if there
are problems since the metar and traffic code are probably the biggest
users of the airport data. I've also added a fuzzy search function that
returns the next matching airport code in ASCII sequence in order to
support gps units that have autocompletion of partially entered codes.
More generally, the simple airport class seems to have grown a lot with the
fairly recent addition of the parking, runway preference and schedule time
code. It is no longer just an encapsulation of the global airport data
file, and has grown to 552 bytes in size when unpopulated (about 1/2 a K!).
My personal opinion is that we should look to just store the basic data in
apt.dat for all global airports in a simple airport class, plus globally
needed data (metar available?), and then have the traffic, AI and ATC
subsystems create more advanced airports for themselves as needed in the
area of interest. Once a significant number of airports worldwide have
ground networks and parking defined, it will be impractical and unnecessary
to store them all in memory. That's just a thought for the future though.
I have prepared a new patch for multiplayer, which fixes endianess issues with
multiplayer code. It's basically identical to the patch I sent before my
vacation, but contains minor fixes.
Multiplayer should now be working under all unix-like environments and windows
native. The basic trick is to let configure check for endianess of the host
system.
It will not work on system not using configure in the build process (excluding
windows), ie. possibly MACOS. For those system we should provide #ifdefs in
tiny_xdr.hpp.
Erik:
I've updated the patch to use the Plib utils package for endian swapping an
used a preprocessor directive to detect endianess.
>> Hello List,
>>
>> I think there's a small bug in the moving-average filter in
>> xmlauto.cxx
>>
>> I noticed that the output from it was always out a bit and
>> checking with a calculator showed that it seemed to be dividing
>> by the number of samples + 1 instead of just the number of
>> samples.
>>
>> subtracting 1 from 'samples' in line 702 seems to fix the problem
>> and as 'samples' doesn't seem to be used elsewhere I think it's
>> safe. Possibly implies that the number of samples may be one
>> less than specified but I'm not familiar enough with c++ to spot
>> it.
Roy Ovesen:
You are right. I would suggest resizing input[] to (samples + 1) instead.
Change lines 654 and 661 to:
input.resize(samples + 1, 0.0);
That way we average over the number of samples as configured.
There was a patch from Manuel Masing a few months ago which cleaned up
SGLocation's way depending on input values. That means that with that patch
SGLocation does no longer have calls with unneeded input arguments.
I took his patch and integrated that into flightgear and made maximum use of
that changes.
Erik Hofman:
Remove some duplicate code that was moved to simgear/compiler.h
- replay.cxx :
corrected a bug, now reinitialize the recording data when replay is
deactivated
- fgclouds.cxx :
cloud layers and weather condition are saved when choosing a weather scenario,
added a new scenario 'none' so we can switch back to standard flightgear
weather
- navradio.cxx :
force a search() on init to initialize some variables, preventing a nearly
infinite loop when delta-time == 0 on the first update()
- electrical.cxx :
uninitialized variable in apply_load() for FG_EXTERNAL supplier
- panel.cxx, panelnode.cxx :
added a property "depth-test" for 2.5D panels so that they update the depth
buffer and are no more visible from the outside of the aircraft when the
aircraft uses textures without an alpha channel
- panel.cxx :
moved the computation of the instruments diffuse color outside the
texturelayer code since this is constant during a frame, this is a big speedup
for 2D panels
Some quite extensive changes to the AIModel code:
1. Mathias has made major changes to the AICarrier code to provide better
alignment of an aircraft on deck with the carrier - this feature is a major
improvement on the existing, but has a bug which might cause it to fail when
the computer carries out other tasks - changing window size is a known
example. This bug is outwith this code.
2. I have made significant changes to the AIShip code to enable a ship the
turn and roll smoothly.
3. I have added some simple AI which enables the carrier to remain within,
or return to, an operating box.
4. An automated turn into wind for flying operations.
5. A simplistic implementation of TACAN within AICarrier. I am in the course
of implementing this as a generic instrument, but this is some time off
completion.
I have prepared a patch that:
- Introduces a FGTileMgr::scenery_available method which asks the tilemanager
if scenery for a given range around a lat/lon pair is already loaded and make
use of that method at some -9999 meter checks.
- Introduces a FGScenery::get_elevation_m method which queries the altitude at
a given position. In constrast to the groundcache functions this is the best
choice if you ask for one *single* altitude value. Make use of that thing in
AI/ATC classes and for the current views ground level. At the current views
part the groundcache is reused if possible.
- The computation of the 'current groundlevel' is no longer done on the
tilemanagers update since the required functions are now better seperated.
Alltogether it eliminates somehow redundant terrain level computations which
are now superseeded by that more finegrained functions and the existence of
the groundcache. Additionally it introduces an api to commonly required
functions which was very complex to do prevously.
- automatic detection of axis directionality, so that axis inputs are appropriately inverted only when necessary
- fixed trim axis names for better understandability
- fixed signs for flaps up/down property increments
- button 0 was previously used for skipping axes and buttons in both loops. Now button 0 can be assigned a binding (e.g., brakes). Instead, moving any axis during the button-assignment-loop indicates skipping.
- The user is now told how to skip a control.
I did some profiling of the code and found a few interessant things. Some corrections are obvious like the one in the multiplayer code, the fps is no more divided by 2 or 3 when another plane is on screen.
Other things like collision detection and computation of agl can not really be optimized. I changed a few things in hitlist.cxx but this only give a very low increase of fps. The groundcache eats a lot of cpu but I think that the real way to do it is to use a real collision system like OPCODE or something like that.
And I added an option to disable the recording of replay data. It takes more cpu than we can think.
Changes
=======
- panel.cxx :
moved the computation of the instruments diffuse color outside the texturelayer code
since this is constant during a frame, this is a big speedup for 2D panels ;
- hitlist.cxx :
changed the computation of the intersection between ray and triangle, optimized
the sphere culling by using a normalized direction vector. This can give a
35% speedup on the computation of elevation in some situations ;
- renderer.cxx, acmodel.cxx :
call ssgDrawAndCull with plane scene graph in external or internal view,
calling ssgDrawAndCull with the root scene graph was drawing other players plane
a second time in multiplayer mode ;
- mplayer.cxx :
removed the calls to ssgFlatten and ssgStripify because it was degenerating models,
causing a massive drop in frame rate ;
- replay.cxx :
added an option to disable the recording of the flight
- fgclouds.cxx :
changed the path of cloudlayer properties to match preferences.xml ;
set the altitude of clouds from scenarios to a more correct value if metar is not enabled ;
I have now included a patch to the multiplyer protocoll which does:
1. place the 3d model into the scenery using a placement transform which can
dynamically change its scenry center.
2. Transmits unique position and orientation data for the 3d model.
3. Thus breaks protocol compatibility.
Oliver Schroeder:
With help from Norman I fixed the alignment in the used headers.
But this patch again fixes only symtoms, not the problems. I suggest to
put it into cvs anyway, as it will enable the majority to get experience
with the multiplayer mode.
Turns out to be a bad interaction between jsbsims crash detection and my
past initialization changes.
The attached patch fixes this by moving crash detection out of the
initialization phase of jsbsim.
- AIManager.cxx :
- we can now have multiple <scenario> entries in the sim/ai entry in preferences.xml
- AIBase.cxx :
- added an exception handler around the loading of the 3D model to not exit FG
if the model is not found
- AIScenario.cxx :
- removed a duplicated read of the xml file, this was also exiting FG is the xml file
does not exist
Changes
=======
- shadowvolume.cxx, renderer.cxx :
- reduced the polygon offset a bit to eliminate some artifact ;
- changed again the cleanup code for objects inside a tile because it could crash on rare occasion ;
- the culling of shadow casters has been rewritten to traverse the scene graph, it should be
a bit faster when there is a lot of objects ;
- the range selector was not correctly handled, sometimes the wrong LOD was casting shadows.
- added the option to display aircraft's transparent objects after the shadows, this will
reduce the problem of shadows being hidden by the transparent object (propeller disk,
rotor, etc). A side effect is that aircraft's transparent objects won't receive shadows
anymore. This is usually a good thing except when the aircraft use a 'transparent'
texture where it should not. A transparent texture in the plib context is a texture
with an alpha channel or a material with alpha <= 0.99.
- model.cxx, animation.cxx, shadowvolume.cxx :
- added an optional <condition> under the <noshadow> animation
- tower.cxx
- correct a rare bug where all occurences of the aircraft are not deleted from the
departure list causing a crash in FGTower::CheckDepartureList function.
Somehow the MIPSpro compiler doesn't like an STL map entry being called
using a variable when the reference is an object and not a pointer to an
object.
Preliminary support for a fontcache is added which prevents fonts from
being loaded more than once and takes care of freeing them up again.
The fontcache isn't used yet since there seems to be a problem somewhere.
I have traced that reset on carrier problem down to several problems. One of
them is the fact that on reset the carrier is updated while the aircraft is
not. That made the aircraft drop down an elevator sometimes. Depending on the
passed realtime while loading some parts of the scenery.
