"General cleanup: Fix several potential segfaults, ensure delete
approach dialog can be exited with the crsr button, implement heading
information in DTO mode, make the comments more useful, and remove old
debugging comments."
<abs>true</abs>
for input elements.
If set to true, the input value is filtered thru fabs() function.
Defaults to false if absent, so there is no impact for existing configurations
The quotes form is normally only used for headers with path relative
to the including file's path, though the standard doesn't strictly
mandate this. This is consistent with the rest of sg/fg, it makes the
code's intent clearer and helps to find headers. (And it's a few
milliseconds faster, too.)
- move local variables out of the class into the methods
- use SG_xxx constants where applicable
- use indexed properties instead of _0, _1, ...
- code cleanup
This can be used to validate atomic branches after individual members
have been changed.
(This is useful no matter how the discussion on aggregate property types
ends, and not meant to enforce/accelerate a decision.)
* line 343: comparison between signed and unsigned integer expressions
* line 441: 'lon', 'lat', 'slr' and 'alt' might be used uninitialized
* line 565: enumeration value 'etUnknown' not handled in switch
This allows to display objects that are in /ai/models/, but not managed
by the AI manager, and it follows fgfs' design principle that subsystems
should communicate over the property tree (if possible). This is a tad
slower, but the radar is only updated once every second.
time' code paths. The problem may lead to skipped fdm updates at very high
frame rates. The most visible effect of that was that the aircraft
slips backwards wrt the forward moving carrier.
Remove unused stuff.
Modified Files:
configure.ac projects/VC7.1/FlightGear.vcproj
projects/VC8/FlightGearLib.vcproj src/Cockpit/cockpit.cxx
src/FDM/Makefile.am src/FDM/flight.cxx src/FDM/flight.hxx
src/FDM/SP/Balloon.cxx src/FDM/SP/BalloonSim.cpp
src/FDM/SP/BalloonSim.h src/Main/Makefile.am
src/Main/fg_init.cxx src/Main/main.cxx src/Time/Makefile.am
Removed Files:
src/Time/fg_timer.cxx src/Time/fg_timer.hxx
queries. This also fixes some issues with the carrier and the croaser
altitude values that is used when no hit is found.
Include some ifdefed out debugging code, that might be interresting.
Modified Files:
groundcache.hxx groundcache.cxx
This patch introduces the optional elements
<config>
<spin-thresh>0.8</spin-thresh>
<max-roll-error-deg>40</max-roll-error-deg>
<max-pitch-error-deg>12</max-pitch-error-deg>
</config>
under the corresponding /instrumentation/attitude-indicator element.
The values are initialized to the shown default values if omitted.
These are the values of the former hardcoded constants.
The current code still has some rough edges, in particular memory still
needs to be deallocated where possible, and the actual use of the code
needs more testing. This code has been running without noticable problems,
so I think it's ready for some wider exposure. Detailed changes include:
- Finetuning of the SID/STAR data concept.
- Preloading of all SIDs, from one xml file.
- ATC determines which SID should be used and echoes this over the com1 or
com2 radio.
Again, the previous commit did not complete for some reason.
Modified Files:
configure.ac src/AIModel/AIBase.cxx
src/ATCDCL/AILocalTraffic.cxx src/FDM/Makefile.am
src/FDM/flight.hxx src/FDM/LaRCsim/LaRCsim.cxx
src/Main/Makefile.am src/Main/fg_init.cxx src/Main/main.cxx
src/Main/viewer.cxx src/Main/viewer.hxx
src/Scenery/tilemgr.cxx src/Scenery/tilemgr.hxx
Make leaner interfaces to the groundcache.
Remove legacy interfaces.
Update users of them.
Add new query routines for 'nearest point' and 'body with given id'.
Modified Files:
src/FDM/flight.cxx src/FDM/flight.hxx src/FDM/groundcache.cxx
src/FDM/groundcache.hxx src/FDM/JSBSim/JSBSim.cxx
src/FDM/JSBSim/JSBSim.hxx src/FDM/YASim/FGGround.cpp
src/FDM/YASim/FGGround.hpp src/FDM/YASim/Gear.cpp
src/FDM/YASim/Gear.hpp src/FDM/YASim/Ground.cpp
src/FDM/YASim/Ground.hpp src/FDM/YASim/Model.cpp
experimental: Only one SID per runway is supported, and the waypoints are
read from file at every request, which is not very efficient. The current
code is only executed when FlightGear is configured to use airport dynamics
data from the scenery repository, instead of the base package. Since the
latter is still the default, I believe that this will provide enough safe-
guarding to commit SID/STAR support in small, incremental steps.
Next step will be buffering and support for multiple departure routes per
runway.
Background are problems modeling the rotax 912 engine. The idle speed
of the real engine is about half of the speed I could achieve with the
default minimum manifold pressure. While on ground I can switch off
the engine by pulling the throttle. The audible difference between the
different minimum idle speed (real vs. simulated) is extreme. With the
patch I get quite realistic sound. For the rotax engine I use
min-throttle="0.05" which is half of the former default value.
localtime() is once commented out in simgear/io/sg_binobj.cxx and
a warning says the it can screw up sim time. This is only because
localtime() isn't thread-safe (and its thread-safe cousin localtime_r()
isn't portable). As long as all timing is done in the main thread
(which is the case) there should be no problem. Otherwise we'd have
to implement a simple mutex locked wrapper.
* Changed the runway XX. ATC message to actually report the real
designated departure runway
* In case of multiple active runways, select the one with a heading that is
closest to the direction of the ultimate departure destination / lines up
with the arrival path.
This gets rid of a lot of messy code. Although the performance is about
the same as the old code, there is the possibility of a big performance
boost if/when the polytope intersector is taught about KD trees.
- make some char* "const" to silence warnings
This removes the warning that (rarely) occurred if one wrote to a
write protected property with setprop(). While this was a useful
hint, it needlessly floods the terminal if one protected a property
intentionally. (Consider to add an SG_DEBUG warning instead.) It's
now the caller's job to check for the result if it actually cares.
some prepratory work for assigning different operations to different
frequencies. It also returns a stub for returning an ATIS message ID.
Currently, the ATIC information ID is hardcoded to "Sierra", which needs
to be replaced by a dynamic ID once ATIS services are fully integrated
with the new trafficcontrol code. At least, it's marginally more realistic
then the previous information XX. :-).
In multiplaymgr.cxx:
The length of a string property that is too big was written out in the message
even though the string was truncated. Also, it was possible to overrun the
message buffer.
In incoming messages, null-terminate the callsign to prevent any funny
business. Don't believe invalid string lengths. Turn the warning about unknown
properties from a warning into info; there are too many buggy clients out there,
not to mention people who add their own MP properties (hi vivian :)
and radials, as well the selected ADF frequency to be transmitted to Atlas
DT: Two minor modifications to the adf part to make it work, and some
testing.
* Some support for geometry information provided by the custom scenery
project. Current support is for AI groundnets and runway use files only
since this is a switch that involves a lot of data verification and
updating, during the transistion the actual path where the data can be
read from is user configurable. setting the property
/sim/traffic-manager/use-custom-scenery-data to true
will cause flightgear to read the ground networks from the scenery
directory (--{fg-scenery}/Airports/[I]/[C]/[A]/[ICAO].groundnet.xml to be
precise). Setting this property to false will retain the original
behvior.
* For departing aircraft, runway takeoff calculations will be done on the
basis of the performance database. For testing purposes, a performance
estimate for a heavy jet has been added.
Can't reproduce the problem that r1.103 meant to fix, but it
caused another problem: MMB dragging events weren't passed,
so e.g. power lever control in the bo105 stopped working.
T_PositionMsg had different sizes on 32 and 64 bit systems, which is bad when
a struct is put directly into an network message.
Try to work around this difference in old clients still on the network.
up in list/textbox etc. (This should really be separately settable
via style definition, but it's very rarely used and a change now
is probably not worth it as we'll probably switch to osgWidget,
anyway.)
there is no valid active runway. This is not ideal, since it masks underlying
problems - the real fix is to make the runway-use code more robust and
validate input XML.
instrument of the same name. In the future I'd prefer to rename the
instrument class instead (FGMarkerBeaconReciever?) but this is the safest
change for now.
Thanks (again) to Yon Uriarte for pointing out the problem (which seems to
affect MSVC more than gcc)
notion of a 'displacedThreshold'. Now there's just a real threshold,
displaced or otherwise, and people who care about the paved area can use
'begin' and 'end'. Thanks to John Denker for pointing out the confusion this
leads to. Using 'end' also gets rid of the 'reverseThreshold' name, which was
clearly a bad choice of mine.
saving for beacons, but since they're surprisingly few (in nav.dat), not a
an enormous saving in real terms. The major motivation is that marker beacons
don't behave like other NavRecords for radio interaction - they have no ident,
frequency or range (in the sense that NavRecord means them).
This makes taxiways smaller (important since at present there are so many).
Restructure the apt.dat parsing code to use a helper class instead of one long
function, and to do less work when parsing the file.
Some of these ideas come from Yon Uriarte's patches - thanks Yon.
This was lost when I stopped cloning the near camera to make the far
camera. The result was a lot of breakage, including explicit camera
configurations not working and various ordering issues too.
This seems to be accepted OSG usage for slave cameras. It's possible
that this order is important for rendering instruments that use RTT
textures on systems without frame buffer object support. I'm thinking
that the resulting bugs may be implicated in the "black rectangle" problem.
The near/far boundary, called "near-field", can be set to 0 which
disables the far camera and renders the whole scene using only one
camera. I'm hoping that this may be useful in resolving some
system-specific rendering bugs.
Various fixes were made to correctly render the scene using only the
near camera.
airportList search function. At least for me (with a mutex-based SGAtomic),
large vectors of referenced-pointers is a Bad Thing - copying on vector
resize is thrashing the locks.
static FGAirport helpers. As a result, another global index goes away. Use
the helpers to avoid ugly FGPositioned down-casts in various places.
Also converts the environment/METAR code to deal with FGAirport pointers,
instead of string identifiers, and contains work-in-progress code to implement
the AirportList dialog using FGPositioned. This isn't enabled yet for various
reasons, but is the final piece to allow FGAirportList to be removed.
gone. This is good news, since the old query was implemented as a linear
search, sorted by Manhattan distance, and with a warning not to use the logic
at runtime. Various systems (such as the Mk-VIII) do query such data often,
eg every second.
Also gets Point3D out of Airports/simple.hxx, as a precursor to removing it
completely.
by frequency (which makes sense), and use the FGPositioned spatial data if
required. As a result, the marker beacon list is gone (since beacons are only
searched spatially). In the process, clean up various minor things - most
notably, all the 'airport-related' navaids (ILS, GS, LOC, and the beacons) now
store a FGRunway* instead of an airport id string. This is more precise, and
saves string allocations.
const) which were previously tricky but now easy. Make it possible not to
index certain types (used for taxiways) and exclude anonymous items from
the name index. Related to this, clean up FGRunway further - remove some public
members, and fix a dumb bug of mine, where we create reciprocal entries for
taxiways.
This should make startup (slightly) quicker, and shrinks FGRunway somewhat.
Add a helper predicate to FGAirport to encapsulate the common 'does this
airport have a suitable runway of at least xxxx ft?' query. Also add a
FGPositioned filter built on the predicate, and a 'closest airport' helper.
"I've managed to fix this by differentiating rebuilding the 3D layers
(e.g. due to METAR updates) from rebuilding the entire environment (due to a
change in scenario)."
reverts one of my changes which ensured that the 3D clouds were updated with
METAR. Unfortunately this had the side-effect of over-writing the environment
properties, and therefore nuking the interpolation work.
Attached is yet another 3D clouds patch, to fix the following:
1) The 3D clouds were not modified by the cloud coverage, due to some problems with osg::Switch
2) METAR changes to cloud coverage were not obeyed.
3) Making changes via the Cloud dialog had no effect unless 3D clouds were toggled.
4) Cloud cover was too sparse.
5) 3D Stratus clouds caused performance issues on some hardware (fixed by removing 3D stratus from cloudlayers.xml - it will now be a 2D layer).
displayed garbage in the title line if one left a directory. Jester
spent a lot of time finding the cause: a bug that must have been
there since ... forever: fgfs reported to PUI the string addresses
as returned by SGPropertyNode::getStringValue() without considering
that this address isn't valid after the next write access to that
node! It's almost a miracle that it worked so well for so long,
despite that issue. (I also used to opportunity for some more
cleanup -- so I'm to blame for any newly introduced bugs, and
also for reverting some of Jester's cleanups. :-)
- Removes the cloud type re-use code - I think they aren't worth the graphical artefacts that they cause in light of Tim's improvements
- Changes the transparency of the clouds. Previously, the clouds were transparent at 0m distance, opaque at 200m, then gradually more transparent to the fog limits. This meant they were generally quite transparent. Now, they are opaque from 200m to 15km, then become transparent at 20km. A side effect of this is that the current textures could probably benefit from being made slightly transparent to improve the blending of the sprites against each other.
Here's a patch which refactors the 'plain' GPS code into a slightly
more manageable structure - i.e breaks the large update() method into
various sub-functions. I've tested the patch with B1900d, and things
seem to work as expected, but if anyone experiences GPS weirdness
after this is committed, of course please report it.
The motivation for this was helping me learn the code - I've planning
some changes in this area, and splitting up the logic will hopefully
make that task easier.
- updates how filtering is done on the various FGPositioned query functions - both spatial and ident-based.
- updates the KLN-89b / DCLGPS code to use FGPositioned for all Navaid/Airport queries.
me:
Add few include directives in globals.cxx to avoid such MSVC warning messages :
deletion of pointer to incomplete type 'FGAirportList'; no destructor called
deletion of pointer to incomplete type 'FGNavList'; no destructor called
deletion of pointer to incomplete type 'FGTACANList'; no destructor called
deletion of pointer to incomplete type 'FGFixList'; no destructor called
- Replaces simple shader attributes with vectors (this was missed out of the last patch by mistake)
- Includes Yon's Fog update code (Thanks!)
- Fixes a bug since 1.0 where --enable-real-weather-fetch stopped the other weather scenarios from working.
- Fix the chequer-board bug.
- Add proper cloud coverage function - so scattered clouds are now truly scattered.
- Add real-time control for visibility range.
- Use a limited set of clouds rather than generating a completely new Geode for each cloud. This saves sorting and display time.
- Add controls to Rendering dialog to allow fine-tuning of the number of sprites, cloud visibility and the number of different types of cloud.
- Add some variance to the sort back-off to avoid all clouds being sorted at the same time.
- Pack attributes into vectors for performance
- Re-order the cloud type determination code so that if a cloud layer could either be stratus or cumulus, cumulus is used.
- Lowered the cloud level in the standard cloud configuration slightly so a cumulus layer is generated rather than stratus.
These last two mean that you should see some 3D cumuli if disabling real weather fetch.
My thanks to Yon Uriarte for his help with performance work.
- a refactoring of the route manager to reduce indentation and duplication
- created a helper method to generate the ETA strings
- created a helper to update target_altitude and altitude_set when the active wp0 changes
- used early returns to make update() easier to follow
- removed spurious includes in both header and source file
Attached patch updates the route-manager to use FGPositioned to search
for waypoints, instead of a manual airport / fix / navaid search. This
is good because it's now using the 'strictly closest' match, rather
than arbitrarily picking a distant fix over a nearby navaid. In my
case, the TLA VOR is significant to several EGPH procedures, but also
happens to be the ident of a fix a long, long way away.
Also updates the FGPositioned class to stop using Point3D, partly
because it's deprecated and partly because I had misunderstood the
interface and was using it wrong. For now, all FGPositioned distance
checks use SGGeodesy::inverse, which is accurate but inefficient. Once
FGPositioned queries are used for something on a hot path, I'll
probably store the cartesian position as well as the geodetic, to make
these checks fast.
Right now, atlas.cxx uses the following code, in
FGAtlas::gen_message(), to retrieve the ADF frequency:
static SGPropertyNode *adf_freq =
fgGetNode("/instrumentation/kr-87/outputs/selected-khz", true);
I think it should be changed to:
static SGPropertyNode *adf_freq =
fgGetNode("/instrumentation/adf/frequencies/selected-khz", true);
temporarily lose control over the aircraft while pressing a
modifier for a button.
- cosmetics: remove trailing spaces and commented out debug messages
These functions are now called in fgOSMainLoop. The fgMainLoop
function was being called twice, which resulted in a slow-down, but
also caused the displayed frame rate to double!
free /models/model[*] slot and lets the model manager load the
model. The target address is returned under "property". Simple
use in Nasal:
fgcommand("add-model", props.Node.new({
"path": "Models/Fauna/cow.ac",
"latitude-deg": 16.234,
"longitude-deg": 48.321,
"elevation-ft": 300,
});
An "elevation-m" property can alternatively be used and overrides
the "elevation-ft" property.
Each of the properties "latitude-deg", "longitude-deg", "elevation-ft",
"heading-deg", "pitch-deg", and "roll-deg" can alternatively be used
with "-prop" suffix. Their values must then be property path strings
pointing to a node that can be changed at runtime to move the model.
coordinates that were set relative to the aircraft's position
are picked up before the view update rather than the next cycle.
This avoids ugly fluttering of "passengers" at higher speed.
Partition depth in CameraGroup:
Remove the ViewPartionNode scenegraph node. The split rendering of the
scene, done to avoid Z buffer precision problems, is now done by two
slave cameras of the viewer.
Rename FGManipulator to FGEventHandler.
Remove virtual member functions that aren't required for event handlers.
Begin using camera group properties to update cameras at runtime;
Initially only the viewport properties are used.
When no camera group is found in the property tree (the default),
create the properties for one. Expose the default window by name.
Add a test for Boost headers to configure.ac. Boost is now a
dependency.
Remove GLUT and SDL versions of the OSG graphics.
stabilize some of the odd artifacts we were hearing, that were especially
noticable in clean sound samples like the stall horn or the marker beacon
codes. The change still preserves the doppler effect and maintains the
good work of a previous developer figuring out how to align the model and
listener velocity vectors correctly.
It fixes the following issues (to a greater or lesser extent):
1) Performance. Quad trees used to improve culling, and the sprites are placed on the surface of a sphere rather than
randomly throughout the cloud, requiring fewer textures. This saves about 5-10fps on my machine.
2) Disabled 3D clouds have no performance impact. Previously they were still in the scenegraph. Now they are removed.
3) Clouds are now loaded on start-up, and don't require the scenario to be changed, they also work with METAR.
4) The cloud field is shifted as you travel. There's a small bug in that the clouds "jump" as you reach the edge of the field.
5) Iterative sorting of sprites. This doesn't appear to solve the alpha blending problem completely, but may help a bit.
the case where the removed child has no other referants, otherwise it
will be deleted on function exit. Also give the ghost type a name for
cleaner debugging.
or the unit was not serviceable. This search() routine needs to run every
iteration no matter what the power or serviceable state. If power is turned
off or the unit becomes unserviceable while a beacon sound is playing, the
search() routine still needs to be called so the sound effect can be properly
disabled.
This was a source of a spew of "NaN" error messages at night when the
sun is at a large angle to the zenith. I don't know why this wasn't a
problem before now.
This patch changes terrasync so it links against the subversion
library if you have it installed. It supports people who build binary
releases for use by non-developers by removing the runtime external
dependency on having command line svn or rsync available. Since the
patch changes autoconf to detect libsvn, I'd appreciate it if people
who release binaries could verify that the detection scripting works
for their platform.
Developer warning: If you do have libsvn developer libraries
installed, terrasync changes its default option from "-R" to "-S" to
remove the command line dependency. However, Martin has not yet
uploaded world scenery into the subversion repository so it won't be
useful to fly against and you may want to specify "-R" on the command
line in the short term. Or run both.
Me: Update MSVC 7.1 project file. Need svn-win32-1.x.y_dev.zip and svn-win32-1.x.y.zip
located at http://subversion.tigris.org/servlets/ProjectDocumentList?folderID=8100
Regarding the Runway selection bug:
The logic here is a bit convoluted, but I also had a dumb bug in normaliseBearing - I was clamping to the wrong range (0..360 instead of -180..180). This caused the scoring code to pick weird runways. I've added some extra cases to my local tests, and here's a fix.
Trivial patch, but an important milestone:
Convert FGAirport to inherit FGPositioned. This concludes the first phase of the FGPositioned changes, and hopefully the most intrusive ones - adding in the base class. There's lots (and lots) of further work to do on the indexing and querying side, as well as cleaning up the accessors, but that will happen in single source files, or a group of related files at a time.
As a trivial note, this patch does fix a bug where the very last airport in apt.dat would get an invalid type. So for all you people who just love to fly to EHYB (Ypenburg, The Hague), things may work a little more sanely.
I'll intentionally let the dust settle after this patch, so any weird behaviour I may potentially have introduced shows up. Just to re-iterate, so far there should be absolutely no user-visible change in the behaviour of anything - navaids, position init, the route manager, AI flight plans, etc. If there is, please let me know and I'll fix it ASAP.
By way of example, here's a patch to make the position init code (in fg_init.cxx) cleaner, partly thanks to the FGPositioned changes. It reduces the file size by 200 lines - virtually all of which was copy-and-paste. Once the remaining class (FGAirport) is converted to inherit FGPositioned, all the future patches should be like this - touching one or a few files at most.
This factors the start-offset logic out into a helper, which also does the final property setting (which has to happen on both the /preset and 'real' values). Using the accessors in FGPositioned, and the offset helper, a couple of cases become trivial (fix and nav) and others become much simpler.
Convert FGNavRecord to inherit FGPositioned. This is much more self-contained than the FGRunway change, since FGNavRecord already had good encapsulation of its state. However, it's a large diff due to moving around two nasty pieces of code - the 'align navaid with extended runway centerline' logic and the 'penalise transmitters at the opposite runway end' logic.
In general things are more readable because I've replaced the Navaid type enum, and the use of Robin's integer type codes, with switches on the FGPositioned::Type code - no more trying to recall that '6' is an outer marker in Robin's data. The creation code path is also pushed down from navdb into navrecord itself.
Convert FGRunway to be heap-based, and inherit FGPositioned. This is a large, ugly change, since FGRunway was essentially a plain struct, with no accessors or abstraction. This change adds various helpers and accessors to FGRunway, but doesn't change many places to use them - that will be a follow up series of patches. It's still a large patch, but outside of FGAirport and FGRunway, mostly mechanical search-and-replace.
An interesting part of this change is that reciprocal runways now exist as independent objects, rather than being created on the fly by the search methods. This simplifies some pieces of code that search for and iterate runways. For users who only want one 'end' of a runway, the new 'isReciprocal' predicate allows them to ignore the 'other' end. Current the only user of this is the 'ground-radar' ATC feature. If we had data on which runways are truly 'single-ended', it would now be trivial to use this in the airport loader to *not* create the reciprocal.
Here's part 2 - converting FGFix (the simplest one) to be both heap-based and inherit FGPositioned. One minor benefit from this is replacing some dangerous code in FGFixList which used to return the address of an iterator member ('&it->second'). To keep the diff a sensible size, I'm not updating the callers to use the richer FGPositioned types - i.e replacing separate lat/lon handling with SGGeod. I will make those cleanups, but in future patches.
If someone could kindly apply the attached patch, that'll keep this from crashing, I believe. The fix is easy since FGAirport can now always provide an active runway - there's no need to guess at random, or rely on the tower having set one up.
Small patch fixing bugs I've encountered while getting the current CVS to build in MSVC.
* std::lower_bound was used with the key-type of a map, but lower_bound expects the value-type of the collection it works on, with is std::pair. MSVC seems to be more strict about this.
* Added an missing include statement.
* Replaced an rint() call with floor() (MSVC does not offer rint).
Here is a little patch that changes the behaviour of the VOR CDI and OFF-flag
for indicators like the HSI when getting outside the range of the VOR
station.
Currently, when flying at a distance between the effective_range and twice the
effective_range of a VOR station, the in-range property is computed based on
a random value, causing the OFF Flag and the CDI bar to perform an ugly
jitter.
The attached patch introduces a new property signal-quality-norm which is
computed based on the distance to the station and the range. It is 1.0 when
the distance is less than the range and decreases by 1/x^2 for distances
greater than the range leading to a signal-quality-norm of 0.25 for distances
two times the range, 0.125 for three times the range and so on.
The in-range flag is tied to a signal-quality-norm greater than 0.2 (fixed
squelch).
The CDI and GS needle deflection is multiplied with the signal-quality-norm.
The benefit is:
- Ability to animate the OFF-Flag with a smooth transition.
- CDI and GS needle deflection shows correct values when in range
(signal-quality-norm=1.0) and show some wrong indication when the range is
exceeded
- CDI and GS needle start to move, even when the OFF flag is visible
- No more jitter for flag and needles
See the new SenecaII ki525a hsi as an example at
http://www.t3r.de/fg/navpatch.jpg
The numbers on the image are:
(1) the new property signal-quality-norm
(2) distance exceeds the effective-range by 30%
(3) NAV flag has a rotation animation bound to signal-quality-norm and is
partially visible
(4) CDI is partially deflected even with NAV flag shown
This implementation better matches reality - at least, how I observed it ;-)
Good news: I'm working on some automatic testing of the 'core' FG pieces, especially those I'm likely to break in my Navaids / airports / runways work
Bad news: I already broke something, in my runways refactoring. (But my tests caught it!)
Attached patch fixes it - it's (of course) the stupidest thing in the world. Incidentally, standardising this kind of code into some (inlined) header is becoming more and more of a priority for me - I've lost count of the number of times I've seen the 'clamp heading to 0..360.0' and 'reverse a heading and clamp it' idioms in the code. The KLN89 and MkVIII code have (of course) their own helpers for this.
This is a little intrusive on the KLN89 code, but avoids the wasteful cloning of the airports, runways and navaids which current happens, and also combines the ugly string ordering code.
- removes various members from FGRunway which no-one was using
- any of these can be trivially re-instated if and when someone
actually wants to use them - but right now they're simply bloating up
FGRunway, which we have lots of, because it currently includes all the
taxiways in Robin's data.
- that's it.
- Runways are now part of an airport, instead of a separate list
- Runways are no longer represented as a boring struct, but as a class
of their own.
-Improved runway access to unify various runway access methods.
use <enabled>false</enabled> flag for widgets that shouldn't be drawn
instead of <hide>true</hide>. This is consistent with other places
in fgfs, like menu entries, hud elements, subsystem switches, etc.
Attached patch + new file make FGNavRecord have a .cxx file, and a constructor w
hich allows all the parameters to be supplied. Along the way I also cleaned up t
he navrecord.hxx header, lots more header pollution has been killed.
Some long methods are no longer inline, but were all suspiciously long to meet c
ompiler inlining criteria (I'm not clear if the 'inline' keyword is advisory or
mandatory in this situation) - I don't expect this to affect performance in any
way whatsoever.
The constructor addition is to support some hacking I'm doing improving the star
tup performance of the navDB by lazily loading the data, and caching it in a mor
e efficient format than text. I'm submitting this change (and probably some othe
r small tweaks in the future) since they are worthwhile as cleanups regardless o
f how my current experiments work out.
CameraGroup supports cameras opened in different windows or in the
same window, with flexible view and perspective specification.
Clean up mouse click handling via osgViewer. Don't let any camera
"have focus;" this forces events to be reported in window coordinates
and simplifies life. Don't use the osgViewer::View::requestWarpPointer
method; instead use our own code which only deals with window
coordinates.
Make glut and sdl versions work with CameraGroup too.
I thought that this would fix the "black hole in the sky" problem,
which turned out to be caused by an OpenSceneGraph bug. Nevertheless
it is a simplification.
* experimental clean-up / reduction on two of the FG headers:
(I'm going to await feedback on the developers list before doing more of
these, to avoiding going over files multiple times, but in principle it
seems pretty straightforward.)
* final fixes for SG_USING_STD removal
- this exposed a bizarre issue on Mac where dragging in <AGL/agl.h> in
extensions.hxx was pulling in all of Carbon to the global namespace
- very scary. As a result, I now need to explicitly include CoreFoundation
in fg_init.cxx.
- change SG_USING_STD(x) to using std::x
SimGear change. It changes all the SG_xxxx to be the 'real' includes, and gets
rid of many #ifdef SG_HAVE_STD_INCLUDES. As an added bonus, rather than
replacing 'SG_USING_NAMESPACE(std)' with 'using namespace std', I just fixed
the small number of places to use std:: explicitly. So we're no longer polluting
the global namespace with the entire contents of std, in many cases.
There is one more 'mechanical' change to come - getting rid of SG_USING_STD(X),
but I want to keep that separate from everything else. (There's another
mechnical change, replacing <math.h> with <cmath> and so on *everywhere*, but
one step at a time)
PLETE_FUNCTIONAL from SimGear and FlightGear.
As a result, SG_HAVE_STD_INCLUDES is now *always* set, so I will get the boring
fixes for that done, but separately. I'm still auditing the other things in comp
ilers.h - there's a lot that can die now BORLAND is gone.
- remove the OSX_BUNDLE crap *I* introduced years ago - we're always a a bun
dle on Mac now.
- fix up the default fg-root on Mac to be FlightGear.app/Contents/Resources/
data - i.e the location used by the macflightgear.org distro, and indeed the obv
ious 'correct' location. Not sure why I didn't use that in the first place, back
in the day.
- remove the CPSForegroundEnable hack. For one thing, we're a bundle and don
't need it, and for another, osgViewer on Mac does the same logic using a newer,
public API rather than a hack into the OS.
- remove the strange logic for doing fgOSInit 'early' (in bootstrap rather t
han main) when running from the command line on Mac; again this is obsolete, and
no one seems to know why it was ever necessary. I guess it was an interaction w
ith SDL when running without a bundle.
- (not Mac related) remove obsolete code bracketed by ENABLE_PLIB_JOYSTICK a
nd USE_GLIDE (neither of which are ever set, even from config.h that I can see)
in main.cxx
Various other patches that have been lingering around for a while:
* Moved trafficcontrol.[ch]xx from the Airports directory to ATC, where
it really belongs.
* AI aircraft will request startup clearance, and ground control will
approve.
* Starting AI Aircraft will be pushed back to a predefined holding point
on the ground network, and wait a while before taxiing out to the runway
- drop unused parts (MouseQuat/GuiQuat)
- move "old-reinit-dialog" fgcommand to fg_command.cxx under new name
"reset" for now. (May later get merged with fgcommand "reinit".)
- move reInit() to fg_init.cxx: This was used by Shift-Esc and
Menu->File-Reset (via fgcommand "old-reinit-dialog"). We have already
a similar function fgReInitSubsystems() in fg_init.cxx, so these two
functions will probably get merged later.)
where chosen to match the SGPropertyNode::WRITE/READ symbol names and
should make it more consistent, but this isn't really something that
should be exposed to the Nasal developer.)
we know the stack trace), it's better to use a separate function for
it, as this can be used conditionally, as in:
setlistener("/the/property", func(n) {
if (n.getValue() < 0) # who's writing negative numbers to /the/property?!
abort(); # let's check the backtrace ...
});
and its function called. This is useful for debugging purposes, to get
a core dump which unveils which C++ code was writing to the property.
This isn't any more of a security problem as other Nasal code that
makes fgfs crash, such as: var x = func call(x); x(); The difference
is that the listener doesn't use up all memory before and is much quicker.
- don't allow to do that from any XML file. This is to prevent malign
code from writing a new fg-home in ~/.fgfs/autosave.xml or other files
in ~/.fgfs/.
After the changes that moved the GUI and HUD to a slave camera, the
texture-based fonts wouldn't display. The main fixes here are making
sure that the TXF textures are all loaded into the font cache early,
and explicitly setting the active texture unit in the GUI / HUD
drawImplementation.
- don't keep oodles of class member variables public (eek!)
- use ::hasValue() instead of ::getType() != SGPropertyNode::NONE
- consistency fixes and cosmetics
Switch to defining PU_USE_NONE and providing our own callback
functions to pui for "get window" and "get window size." A new
WindowSystemAdapter class assigns ID numbers to windows for the
purpose of identifying them to plib; the window size can be extracted
from the osg::GraphicsContext class in all the different
implementations (osgViewer, glut, sdl).
Implement a GraphicsContextOperation that runs code in a particular
graphics context, perhaps in another thread, and provides an
isFinished() method to test if the operation has finished. This allows
us to initialize plib PUI properly if there are multiple graphics
contexts without using fgMakeCurrent(). fgMakeCurrent() can't work in
multi-threaded OSG configurations.
Eliminate fgMakeCurrent() and all its uses, either by using
GraphicsContextOperation or by seeing that it is not necessary.
Attach the GUI camera as a slave camera.
Don't manipulate the OSG state in the drawImplementation() functions
for SGHUDAndPanelDrawable and SGPuDrawable; it's not needed.
Attached patch adds support for multiple FIXes with the same name.
Applies to both branches.
New functionality is in query_and_offset, which now returns the FIX
closest to the passed in location.
Updated route manager to take advantage of this.
Otherwise, query functions return an unspecified member from the set
of identically named FIXes. (This was previously the one occurring
last in the database file, but I don't think anybody counted on that.)
- it's unused
- it's hardcoded (we already got rid of all other hardcoded dialogs)
- we'll have to consider switching to osgWidget, which is planned to
get imported into osg. It's unlikely that we add *more* of PLIB
in the meantime.
"the [...] patch (for fg) increases the time before invisible geometry (i.e.
geometry not inside the view frustrum) gets deleted. default was 10 seconds
which i am increasing to 2 minutes."
on the '*'-key, but allow to cycle it by setting
/sim/rendering/on-screen-statistics to "true"
- move that function to the Debug menu (no more key assigned!)
- add "print-statistics" menu entry
under some circumstances. The history of this patch is somewhat unclear,
but was brought to my attention by Martin Spott, while preparing for the
Lelystad FSWeekend show. See also my posting on FlightGear devel, on
November 22, 2007 "(Multiplayer Local Echo Patch)", but wasn't committed
then because I/we assumed that had been superseded by other code
modifications. The local echo problem still persists, however, albeit
under specific circumstances. The current patch reportedly prevents this
from happening.
and the pushback code:
- Traffic manager starts modelload requests immediately upon program
loading
- Only create legs 1 (push back) or five (cruise) of AI traffic.
- AIAircraft's rather obsessive behavior to circle around a waypoint is
largely resolved
- More realistic ground steering for AI aircraft.
Thanks to Vivian Meazza for debugging this. The output deque for
FGDigitalFilter was not being kept long enough for the
doubleExponential filter. Reads from output[1] could cause a crash.
From Till:
i started the project at the end of february with a simple idea: move all
3d-model loading to the DatabasePager-thread. my first attempts looked
promising, though they were a little too optimistic (or naive?). the patch
has evolved a lot since.
currently it does the following things:
1. revive SGModelLib, move functions for xml-model-loading there
2. replace all calls to sgLoad3dModel with calls to either
SGModelLib::loadModel() or SGModelLib::loadPagedModel()
almost all models will be loaded by the DatabasePager. the few exceptions are:
your own plane, shared models in scenery, random objects, AIBallistic models.
3. simplify mode-loading functions (avoid passing around fg_root)
4. avoid supurious MatrixTransform nodes in loaded models
5. fix some memory leaks
Introduce a convenience member function in wxRadarBg for creating an
SGPropertyNode and initializing it in one step. Use this in
agRadar. This eliminates buggy behavior when the necessary radar
properties aren't defined.
$ fgfs --version
2.0pre-20080314
FG_ROOT=/usr/local/share/FlightGear
FG_HOME=/home/foo/.fgfs
... assuming that VERSION in config.h is "2.0pre-20080314". Which it isn't.
Instead it's "1.0.0" since yesterday, and was "0.9.10" before that. This
has yet to be discussed, and I'll add the option to options.xml later.
Reindent to Stroustrup style.
Make FGPrecipitationMgr an SGSubsystem and remove all references to it
in main.cxx and renderer.cxx.
Use SGGeod::makeZUpFrame instead of a private function in
tileentry.cxx. Rewrite that function, WorldCoordinate, to use
makeZUpFrame too.
Makes it possible to start at a parking location defined in the AI/Airports/*/parking.xml files, using the parkpos command line option.
Note that the name to pass is the concatenation of the "name" and "number" fields in the xml.
This allows Nasal managed views thanks to the proximity of the
event manager (which executes Nasal loops). The io manager must
come after the view manager to avoid jitter in network replay.
As discussed with Tim on irc: Here is a quick fix for the memory-hungry tile
manager. Due to bugs in FGNewCache, old tiles were never deleted.
I left the timestamp-updates in the cull-traversal. but imho things work
just as well when timestamps are updated in FGNewCache::insert_tile() and
FGNewCache::get_tile()
Lee has added two new filter types, "gain" and "reciprocal". These filters can
read their gain factor from a property. In the process we also added minimum
and maximum output clamps that are applicable to all filters.
I added the ability to configure adaptive controllers i.e. the controller gain
can be tied to a property, so that it can be changed at runtime. This
requires a change in the xml structure of the autopilot configuration file:
<Kp>
<prop>/autopilot/KAP140/settings/ROL/Kp</prop>
<value>0.10</value>
</Kp> <!-- proportional gain -->
The old method <Kp>0.10</Kp> still works so as to not break all existing
autopilots, but it will output a warning to use the new method.
Please find attatched a new version of xmlauto.cxx.
Remove the call to build() in reinit(). This prevents build() from being
called twice when Reload Autopilot is selected from the Debug menu.
I've also added the ability to define an enabled property for the filters.
It's used like the PID controllers. If there is no enabled tag then the
filter defaults to enabled so that nothing should get broken by this change.
This ability can be used to create a filter between the output of a PID
controller and the property that it controls (a control surface). By putting
a noise spike filter between the output of a controller and the control
surface that it controls, we can simulate the limited movement rate that is
inherent in autopilot servos.
This patch contains bugfixes from my previous patch
(i made mistakes when using "diff" utility last time):
1. Now ATC do not tells us to go around because of
traffic on RWy, when that traffic is WE.
2. Now ATC don't say that we must follow ourself
(like "GFS, number two, follow GFS on final").
And new Tower-ATC features:
1. Requesting departure clearance. When you are
on taxiway, you can request departure clearance.
Tower will answer with something like:
"Line up runway two eight right".
TODO: check if any AI-Planes on final and tell
something like: "After the landing AI-CALLSIGN
line up runway two eight right".
2. Requesting take-off clearance. If you are on
runway, you can tell to ATC that you are ready
for take-off. So, Tower will tell you that you
are cleared for take-off (or immediate take-off).
3. Reporting landing gear position on final by pilot.
If you are on aircraft, which landing gear can
be UP, when reporting final you will tell
"Gear down, ready to land".
4. Reporting landing gear position on final by ATC.
When i was newbie and was flying on Cessna 310, i
ALWAYS forgot landing gears on final. Now if you are on
final and forgot landing gear, Tower will tell you:
"LANDING GEAR APPEARS UP" or "Check wheels down and
locked". So you will have some time to push gear
down or execute missed approach ;)
5. ATIS phonetic ID in requesting landing message.
In FG pilots says: "for full stop with ATIS" everytime
(when airport doesn't have ATIS too). But in real life
pilot saying phonetic ID of ATIS message. Now we have:
"for full stop, information alpha ... / ... zulu".
If airport doesn't have ATIS, pilot don't say this.
TODO: add this feature to AI-Planes too.
6. Advising weather condition in airport by Tower.
If you are requesting take-off or landing in airport
that doesn't have ATIS service, Tower will tell you
about wind direction and speed, visibility and QFE.
7. Reporting downwind if missed approach. When some AI-Plane
is on final FG's ATC tell you to "continue approach".
And then you lost radio transmission. Now ATC says:
"continue approach and report left/right downwind".
And now we have "Report Downwind" entry (button)
in "ATC Communication" form.
This also fixes distortion weirdness in the osgviewer version. That
was caused by osg::GraphicsContext getting in the act on resize events
and adding its own scaling to the projectionOffset of slave cameras!
The LOD far range on the tile entry scenegraph node was initialized to
0. This meant that any traverals of active children that happened
before the tile manager updated the node would ignore the node
altogether. Among these is the groundcache traversal which was failing
at startup even though scenery was loaded.
Also added a function to dump scene graph nodes to files; very handy
in gdb.
Make an OSG file reader for .stg files.
New class flightgear::SceneryPager, which is a subclass
osg::DatabasePager to handle explicit delete requests.
Modify FGNewCache, FGTileEntry, and FGTileManager to use
SceneryPager. Mostly this involved removing the queues that talked to
FGTileLoader.
Calculate accurate tile timestamps from the time they are traversed in
the cull stage (which means that they are visible) instead of updating
them periodically.
Replace tile entry transform and range node with one LOD node
This fixes a race condition when teleporting somewhere outside of the
currently loaded scenery. Before, if there was no valid scenery, an
aircraft might end up at the center of the earth...
Instead of just reporting that the magic number, length, etc. of a
multiplayer packet is invalid, abort processing this packet. Also,
check if enough space remains to send a property string.
are not available out-of-the-box on all systems and keyboards, and should
therefore not be used in files committed to CVS. This makes them well
suited for local key bindings, as they aren't likely to get overwritten
with later releases. SDL supports Meta and Super, OSG supports only Meta,
and GLUT supports neither.
(Somehow this part escaped the previous commit. :-)
are not available out-of-the-box on all systems and keyboards, and should
therefore not be used in files committed to CVS. This makes them well
suited for local key bindings, as they aren't likely to get overwritten
with later releases. SDL supports Meta and Super, OSG supports only Meta,
and GLUT supports neither.
This uses the osgViewer infrastructure instead of setting up and osg::SceneView.
When the same change is made for glut, much of render.cxx can be deleted.
Some cleanup in tileentry.cxx, but mostly code to implement loading of tiles
and their models without reference to FGTileEntry or SGBucket structures.
Also, don't do deferred model loading; load them when the tile is loaded.
_material was uninitialized. This was causing a segfault with
as-yet-to-be-checked-in paging code; I don't know if it ever resulted
in a segfault with the old tile loader, but it certainly could have.
file. Possible uses of this functionality could include converting the
model to some other format or coordinate system for use in some other
visualization or simulation.
This is required to make sure the same letter key gets released,
which got the press event. (After Ctrl-press -> a-press -> Ctrl-release
a-release we want the Ctrl-a binding released, not the a binding.)
- add key listener interface for direct key access from Nasal space
This removes some jitter in cases where Nasal is used to set up view
parameters from FDM data, such as position and orientation. (The event
subsystem handles Nasal's settimer() calls.)
This was correct in the old repository and in revision 1.1 of the new,
but then broken in revision 1.2. After that, "lookat" and "lookfrom"
mode used different coordinate systems, and the "Adjust View Distance"
didn't work correctly in "lookat" mode.
"I have been investigating the Concorde IVSI problem. I came to the
conclusion that the trouble is that the environment altitude and thus
the pressure (which is calculated from that) is lagging by 1 frame.
Normally that wouldn't be a problem, but the IVSI calculates rate of
change and it will use the new dt with the old value difference,
thereby arriving at bad results if dt changes (and it does)."
invocations, but left it in place for miscellaneous allocation work.
Contexts cache allocated objects in a temps vector and only clear it
out when they are used.
Also, fix a type warning while I'm in there.
version
* Delete ai list objects in ~ATC/AIMgr.cxx:AIMgr::~AIMgr()
* Delete colors in GUI/new_gui.cxx: NewGui::~NewGui.cxx
* Delete memory allocated to the class member "route" in
Instrumentation/gps.cxx
* Delete all globals (except a few "unsafe" ones that still cause segfaults
and need further examination.
* Use an SGShared pointer for navaid memory allocation, so that pointers to
individual navaid objects can be included safely in multiple navaid lists
- simplify listener purging and fix removelistener() return value for
one-shot listeners
- listener: inherit virtualness
- s/handler/code/ in listener code to be consistent with NasalSys::call
argument:
setlistener(<property>, <func> [, <initial=0> [, <persistent=1>]])
This definition defaults to the old behavior. The fourth argument can
be set to zero, in which case the function is only called when the
node value has actually changed. It should really default to zero, but
then all callers would have to be reviewed, which is a bit too dangerous
"shortly" before a release.
0 -> trigger whenever property is written to (even if it's the old value; default)
1 -> like 0, but also trigger the function initially
2 -> trigger initially, but then only on changes
AMIBO 34.973889 021.658056 ARLOS 34.625278 023.000000 1 095 195 M871-MT E-MT W-N4
... where unexpected ids follow (here E-MT W-N4). The loader didn't skipeol.
The additional values are for a first quick&dirty fix just dropped.
remove all those 41 hacks if possible. Metrowerks is under category
"Defunct software companies" in Wikipedia, its compiler was known to
work on PowerPC (which we don't support, anway, right?) and on some
Unices. The hacks are in CVS since the first commit 2002/9/10 (old
repository!) and probably were in the code long before that. Any
platform where such a broken compiler is still used, will hardly
be suitable to run fgfs at all.
them under /sim/presets/ but they aren't save there, and as fgInitPosition
and its subroutines overwrite them, we lose the information about what the
user really wanted. This is a temporary solution -- it really belongs into
options.cxx.
the next airport or airport with METAR station, but about any type of
airport
- as a side effect this change makes it also 30 to 50% faster :-)
In the long run this linear search shall be replaced with a spatial
algorithm (like octree), which will be a much bigger performance gain.
- preserve information from apt.dat about whether an airport is a "normal"
airport, a seaport, or a heliport. Do it without wasting another byte
in the FGAirport structure (saves 50kB of memory). Yes, I know bitfields. :-)
Turn OPENSCENEGRAPH_MAJOR_VERSION, OPENSCENEGRAPH_MINOR_VERSION and
OPENSCENEGRAPH_PATCH_VERSION into a single number for comparisons in the
preprocessor.
the runway length/width/surface material, so that fgfs doesn't drop one on
the ridiculous grass stripe parallel to the grown up concrete runway
(LOWL, LOXZ, ...). The weighting factors are for now made configurable,
so that they are easier to adjust. This can later be made static.
(will soon get forward ported to fg/osg)
Usage: airportinfo("KSFO");
airportinfo(37, 122); # airport closest to lat/lon
airportinfo(); # airport closest to current position
Returns nil on error, or a data hash otherwise. Example:
# length of runway 28R
var len = airportinfo("KSFO").runways["10L"].length;
Note that only one side of a runway is returned.
This fixes a bug that caused both the x and y values of the mouse to
be reset when the cursor was recentered due to hitting the screen
edge.
Based on a suggested patch from Stuart Buchanan
Anders said:
With Stuart's help I've looked closer at this and I think I've tracked
down the cause of the problem:
At least on my computer the sort() call on line 234 in
Environment/environment_ctrl.cxx sorts the vector entries by memory
address instead of altitude, i.e. the custom comparison predicate is not
used. This causes the tables of environment conditions to be reordered
into a wrong order at some weather updates, depending, basically,
on where the memory allocator places the objects. (Btw. why are they are
freshly allocated for each update?)
and "isOnRunway".
- Added initial support for AI controlled pushback operations, making use of the
current editing capabilities of TaxiDraw CVS / New_GUI_CODE. The current
implementation is slightly more computationally intensive than strictly
required, due to the currently inability of taxidraw to link one specific
pushBack point to to a particular startup location. FlightGear now determines
this dynamically, and once we have that functionality in TaxiDraw, the
initialization part of createPushBack() can be further simplified.
- Smoother transition from pushback to taxi. No more skipping of waypoints, and
aircraft wait for two minutes at pushback point.
- The classes FGTaxiNode, FGTaxiSegment, and FGParking, now have copy
constructors, and assignment operators.
- Removed declaration of undefined constructor FGTaxiNode(double, double, int)
- Array boundry checks and cleanup.
- Modified Dijkstra path search algoritm to solve partial problems. Currently
limited to include pushback points and routes only, but can probably be
extended to a more general approach.
- Added initial support for giving certain routes in the network a penalty, in
order to discourage the use of certain routes over others.
"interpolates METAR changes over time as follows:
1) Wind changes are interpolated as vectors, so the change is much more
natural than before - no-longer will your aircraft be suddenly shoved to
one side.
2) Visibility is interpolated as an X-value, which looks pretty neat.
3) Cloud heights and thicknesses are interpolated if they are close to the
aircraft. Cloud textures are not."
- support optional <preamble> and <postamble> which are written right
after opening and before closing respectively. This can be used for a header
line or an XML header.
- unescape <preamble>, <postamble>, <format>, <line_separator>, <var_separator>
so that \t, \n, \r, \f, \v, \xnn, \nnn can be used directly (\a and \b are
ignored; use \\ for the backslash) The long names ("carriagereturn") are still
supported for <var_separator>, but one can just use \r, or \r\n too.
- don't abort when a chunk doesn't have a <node>. This is useful for adding
constant chunks which consist only of a <format>, such as XML tags.
src/FDM/flight.cxx src/FDM/flight.hxx
src/FDM/LaRCsim/LaRCsim.cxx src/FDM/SP/ADA.cxx
src/Scenery/scenery.cxx src/Scenery/scenery.hxx:
Remove obviously unused variables from FGInterface, make use of
SGMath functions. No longer use plib math functions in FGInterface.
own preferential runway support. In future versions, we might want to
condider having a more generic mechanism for this.
- Keep a history of active runway for each class, so that runway assignments
are more consistent after whether updates or time-related schedule changes.
On most Unix platforms like FreeBSD, Solaris, IRIX (AIX is even worse)
- just not on Linux - the linker wants to know about _all_ required
libraries. So even if a shared library "libosgViewer" itself is linked
against "libosgGA" and "libosgText", you still have to name these in
order to build an "fgfs" binary.
Currently, other libraries like "-losgDB" and "-losgUtil" are
explicitly mentioned on the "fgfs" linker command, but "-losgGA" and
"-losgText" are not. This simple patch lets the linker honour
everything that's required
- Airports Directory
Thomas Foerster: Pulls out the FGTaxiNode implementation into gnnode.cxx.
Melchior / Durk: Copy Constructor and assignment operator for FGTaxiRoute
- AIModels Directory
Durk / Melchior / Czaba Halasz: Ensure that all derived classes use AIBase
member 'callsign'. Adapted, moved and deleted getter/setter functions where
necessary
Czaba Halasz: Fix AIBase model path vs. submodel path consistency.
- Traffic Directory and AIModels CreateFlightPlanCruise
DT: Temporary revert parts of the position estimation code.
(reported by Csaba Halaszi /helijah)
2) Decrease AI aircraft Heading error tolerance to 1% of its
original value. This is necessary to mitigate spinning and
makes for actual "on-runway" landings.
src/AIModel/AIFlightPlan.hxx
src/AIModel/AIFlightPlanCreateCruise.cxx
src/AIModel/AITanker.cxx src/Traffic/Schedule.cxx:
Move member variables that should better be in function local
scope into the functions. Make more use of SGMath functions.
of the extra space *required*) in a rowspan object being redistributed
back into the span, leading to a near-doubling of the size for small
objects with large span ranges.
Fixed bug due to longstanding inconsistency in FGAirport
getter functions return types.
Durk Talsma: Fixed traffic record initialization bug that occured
when taxiing traffic was waiting for traffic on runway
I refactored the XML loading code out of FGAirportDynamics and
FGRunwayPreference. I also added a new class XMLLoader, which serves as a
facade to the loader functions. Further I changed FGRunwayPreference to just
keep a FGAirport ref, which is more concise and closer to the right(tm)
solution than storing the airport data a second time ;-)
I refactored the XML loading code out of FGAirportDynamics and
FGRunwayPreference. I also added a new class XMLLoader, which serves as a
facade to the loader functions. Further I changed FGRunwayPreference to just
keep a FGAirport ref, which is more concise and closer to the right(tm)
solution than storing the airport data a second time ;-)
"This patch fixes the use of the keypad with numlock in the osgViewer
version of FlightGear."
"This also restores the handling of resize events while trying to stay
out of the way of the multiple display code."
parser. Advantages over xml.nas: (reviewed and OK'ed by Andy)
- faster (33% ... only. I had hoped for more.)
- more standards compliant
- should support UTF
- I don't have to support it. ;-)
Usage: parsexml(<path> [, <start-tag> [, <end-tag> [, <data> [, <pi>]]]]);
<path> is an absolute file path, the rest are optional callback functions.
Example:
parsexml("/tmp/foo.xml", nil, nil, func(d) { print("DATA FOUND: ", d) });
where type is one of string (default), double, float, long, int, bool
Using only the first letter works, too.
--prop:foo=123 ... sets property foo to string 123 (old behavior)
--prop:string:foo=123 ... verbose version of above
--prop:s:foo=123 ... slightly less verbose version of above
--prop:bool:foo=1 ... makes property a bool of value 'true'
I hope this isn't considered a silly gimmick. I need this often and maybe
other developers do, too. It's useful in cases where the difference really
matters. if (getprop("/foo")), for instance, is TRUE even when the property
contains string "false", as all strings are TRUE.
efficiently performing "Dijkstra algorithm".
Durk Talsma: Added the detection of "circular" wait situations in the AI
ground network. A circular wait is a situation where aircraft a waits for
b; b waits for c; and c (in turn) waits for a. The checkCircularWaits
function detects these situations.
The current "solution" to a circular wait is rather crude: Remove the
aircraft from the scene. A proper solution needs a lot more work, however,
and at least this patch stops the AI system from clogging up. in case of a
circular wait.
data for AI traffic. Default performance classes are still available as a
backup. This database will allow the calculation of aircraft-specific
take-off speed and estimate runway lenght requirements. Further added
rudimentary support for take-off and landing rotation of AIAircraft.
together -- there's only *one* instrument node now
- don't take "random" tacan, but <tacan-source> from the instrumentation
config (or /instrumentation/tacan[0] by default)
- don't take "random" display-controls from /instrumentation/tacan[0]
- default name is now "radar" (formerly "wxradar")
* it says it's a warning (while in fact it's just saying what it's doing)
* the user can't do much here (yes, flying slower, but it doesn't say that :-)
* scrolling those countless messages in the terminal puts stress on the CPU
in a time when it's apparently already struggling
- re-enable od_gauge ("owner drawn" render-to-texture instruments)
- implement radar in c++ (unlimited number of clouds/ai/mp/... objects,
better performance)
or nil if no terrain intersection could be made (tile not loaded yet).
<matdata> is a hash with information about the surface material, or nil
if no material is assigned (shouldn't really happen, but one never knows).
Example:
var ac = geo.aircraft_position();
var data = geoddata(ac.lat(), ac.lon());
debug.dump(data);
# which outputs
[ 294.5862574369132, { light_coverage : 0, bumpiness : 0, load_resistance : 1e+30,
solid : 1, names : [ "pc_taxiway", "dirt_rwytaxiway" ], friction_factor : 1,
rolling_friction : 0.02 } ]
With this information it can be determined how far an object would sink in,
if the coordinate is on a runway, etc.
foreach (var n; data[1].names)
if (string.match(n, "p[ac]_*"))
im_on_a_runway();
/sim/screneryloaded-override was "true". At least one subsystem (od_gauge)
waits for /sim/sceneryloaded to bypass CPU intensive code until the scenery
is up. This broke e.g. the RTT-radar when using /sim/screneryloaded-override
--prop:sim/sceneryloaded-override=true has the effect that fgfs
doesn't show the splash screen until the scenery is loaded, but shows
the OTW view (scenery/aircraft) at the earliest possible moment. This is
useful for developers who often need to run fgfs only to check some minor
detail, while not caring about stuttering caused by scenery loading.
simple SG_LOG instead. The user didn't call the fgcommand, so why should
s/he be bothered with that? And the actually caller of the command gets a
return value and can pop up a dialog if it thinks it's necessary.
Why /sim/fg-current at all? Because we have a file selector dialog
(still unfinished), and one might like to start it from the current
directory, to find saved flights/screenshots/whatever.
FGManipulator.*:
"This patch works around a bug in OSG's handling of modifier keys. The
symptom of the bug is that modifier keys don't appear to be released."
fg_os_osgviewer.cxx:
"This patch fixes the test for support of cursor changes in OSG 2.0."
because this allows to load from FG_HOME. To reduce security risks, always
append an ".xml" extension if there was none. Makes it hard to read /etc/secret
and to overwrite ~/.bashrc. :-)
IRC wanted this to be scritable) and add it back (as a tip popup) via
a little nasal in the keyboard handler. Also put the synthesis of
property nodes back into fgcommand(), because I got cold feet.
missing, for sanity. Note that this will pass the resulting NULL
pointer through into the underlying SGCommand handlers, some of which
may be unprepared for it. So basically this is now yet another way
you can use Nasal to exercise bugs and hose your sim; no biggie.
- if no <impact-reports> node is defined for a particular submodel, then
write the path to /ai/models/model-impact instead
- don't tie() properties that are only ever set a single time, if at all!
- better variable names
src/Scenery/tileentry.cxx: Jonathan Wagner:
Removes black dots by accounting for radius of nodes
when calculating visible nodes for traversal without removing the
optimization. Confirmed fix with a few people on IRC.
src/GUI/gui.h src/GUI/gui_funcs.cxx src/Main/fg_commands.cxx
src/Main/renderer.cxx src/Main/renderer.hxx: Tim Moore:
These patches implement a command to dump the entire OSG scene graph as
a .osg text file. While large, this allows debuggers to really see
what's happening in the scene graph.
configure.ac src/Main/Makefile.am src/Main/fg_os.cxx
src/Main/fg_os.hxx src/Main/fg_os_sdl.cxx src/Main/main.cxx
src/Main/renderer.cxx src/Main/renderer.hxx
src/Network/jpg-httpd.cxx
Added Files:
src/Main/FGManipulator.cxx src/Main/FGManipulator.hxx
src/Main/fg_os_osgviewer.cxx:
Tim Moore: Make use of osgViewer.
a report node in the submodels config:
<impact-reports>/sim/model/cow/impact</impact-reports>
When an impact happens, then the path of the submodel will be written to
this node. An attached listener function can evaluate the impact properties.
at all is that this method is meant to be deprecated. But if it doesn't
say that, and there's no generic replacement at all, then it's rather
pointless.
- simplify parameter initialization (The old code copied from Instrumentation/
but has been simplified there in the same manner a few months ago
The new method is less picky about additional nodes ane outputs less
pointless alerts. If there shall really be a check for that, then
this should be a separate function. But it's nowhere else done in fgfs.
recover instead
- it was apparently planned to run the updated loop only every 1000th
frame, but the counter isn't reset, so it runs every frame
- use SG_LOG instead of cerr
- don't add redundant slashes in SGPath::append()
throwing an instance of 'sg_io_exception'\nAbandon". And this is caused
by compiling fgfs/sg without exception support (unlikely) or linking
against a libSDL/libglut that was compiled/linked without execption
support. While we can't fix that, we can tell the users who's to blame. :-)
- handle const char * exceptions
"minor update for the rotor FDM. It results in a more realistic
calculation of the phase shift of rotor and therefor in a little bit
more realistic flight behavior.
(Additionally you can modify the initial position of the rotor and some
(not finished) modifications for the jet ranger rotor)."
show "secret" values, that is: values of nodes with children. These
can be used like all normal (leaf) properties, but their values were
until now only shown in writeProperties() dumps. Also show the
number of attached listeners. Example: foo = 'bar' (string, AU, L3).
dialog.cxx: add warning message for broken <format>s; cosmetics
- props is easy to mix up with the --prop option (for setting properties)
- the name is unspecific and inconsistent: other option names describe
the protocol -- the way to get the properties. How is, for example,
--httpd less about prop(ertie)s?
- two identical options easily confuse people, as can be seen in The
FlightGear Manual, where --telnet and --props were described differently
/sim/view[*] that it finds. It's not only unnecessary that view definitions
have subsequent indices, but aircraft are now *requested* to use indices
100++. /sim/view[0] .. /sim/view[99] are reserved for the system. (Not
that we'd ever need that many, This is just a convention, it's nowhere
hard-coded.)
- replace the string operations for property paths by method calls & other
improvements
because nasal's f_interpolate() may be called in Nasal at times when the
GENERAL subsystem group is being deconstructed; access it by addressing
the group directly, as using globals->get_subsystem() does then not
work any more then; yeah, it's all for a rare border case ... :-)
NasalSys.cxx more robust instead. The reason for the crash was that during
fgfs shutdown destroyed subsystems (GENERAL group) still need Nasal access
(for AI Model destruction listeners), but at that point globals->get_subsystem()
can't even deliver the "nasal" subsystem (INIT group). One way to solve that
problem would have been to replace globals->get_subsystem("nasal") by
globals->get_subsystem_mgr()->get_group(SGSubsystemMgr::INIT)->get_subsystem("nasal"),
but Andy decided to store a pointer to the active "nasal" subsysten in
NasalSys.cxx instead, as the "nasal" subsystem needs to be accessed in
every single Nasal extension function, and multiple "nasal" subsystems are
out of the question, anyway.
we need to explicitly destroy that here, too, so that it has guaranteed
access to the Nasal subsystem. Otherwise we get a segfault on exit. When
the next subsystem needs this special treatement (radar?), we should
introduce a new subsystem group (in addition to INIT and GENERAL)
"FATAL: PUI: No Live Interface! Forgot to call puInit ?"
We shouldn't use the splash progress message before guiInit().
Leave the "idle_state" step for now, to keep the similarity
with fg/plib as big as possible. This can be dropped later.
Patch to enable atc chatter (and any other arbitrary "message" audio file)
to be played at any specified volume. (Previously these messages were always
played at a hardcoded volume of 1.0)
- loop up file name in the cache at startup. If it's found, check if the
file exists and use it, otherwise scan $FG_ROOT/Aircraft/ as usual,
and create a new cache while doing that. Rebuild cache on FG_ROOT change.
getAttribute("archive") returns 1 if the attribute is set, and 0 otherwise.
Allow to query and to set all properties by not specifying an attribute
string: getAttribute() returns all attributes bit coded in an integer,
and setAttribute(attr) sets all attributes. No assumptions may be made
about the meaning of the bits -- they can be changed in future fgfs releases.
The only valid use is to compare or set attribute numbers obtained in the
same fgfs run. This is meant for allowing full copies of property branches.
Also add getAttribute query strings "children" for the number of children,
and "alias".
- fix breakage due to former commit (AIManager.cxx, r1.72)
- make AI properties available in AIBase
- add <valid> property for animations/nasal scripts
- support more MP and AI targets
- add target select and altitude display
their XML wrapper/animation file. They can access their /ai/models node
via cmdarg() function. Example:
<nasal>
<load>
print("Hi, I'm the Nimitz. My data are under ",
cmdarg().getPath());
</load>
<unload>
...
</unload>
</nasal>
Note, however, that the <unload> block is only called on exit at the moment,
not when the tile is unloaded.
"""
"Flight plans" which can start at a given time (gmt)
WAITUNTIL tokens which pause the flight plans until a given time (gmt)
Submodels can now be attached to any AI objects (except submodels - it can
be done, but in my experimental code it's too expensive in frame rate atm)
"No-roll" attribute added to Ballistic objects - useful for wakes and the
like
"Random" attribute added to Ballistic objects (adds =- 5% to the Cd) -
useful for smoke, exhausts
If the <trigger> tag is not specified the Ballistic object/s will be
released at start-up (cannot be stopped)
Submodels are not released from AI Objects if the AI Object is more than 15
miles away.
"""
mf: minor code and formatting fixes; submodels.?xx were FUBAR and are thus
astyle formatted;
NOTE that <name> tags END, EOF, WAIT, WAITUNTIL are *depreciated*.
Don't get too used to them. This will have to be moved from the "name"
to regular engries.
Nasal now supports calls to "subcontexts" and errors can be thrown
across them, leading to complete stack traces when call() is used,
instead of the truncated ones we now see.
Vectors can now be concatenated using the ~ operator that used to work
only for strings.
Better runtime error messages in general due to a fancier
naRuntimeError() implementation
A big data size shrink on 64 bit systems; the size of a naRef dropped
by a factor of two.
"Braceless code blocks" have been added to the parser, so you can
write expressions like "if(a) b();" just like in C. Note that there's
still a parser bug in there that fails when you nest a braced block
within a braceless one.
Character constants that appear in Nasal source code can now be
literal multibyte UTF8 characters (this was always supported for
string literals, but character constants were forced to be a single
byte).
New modules: "bits", "thread", "utf8" and (gulp...) "io". The bits
library might be useful to FlightGear, the utf8 one probably not as
Plib does not support wide character text rendering. The thread
library will work fine for spawning threads to do Nasal stuff, but
obviously contact with the rest of FlightGear must be
hand-synchronized as FlightGear isn't threadsafe. The io library is
no doubt the most useful, as it exposes all the basic stdio.h
facilities; it's also frighteningly dangerous when combined with
networked code...
have no children (in which case they default to 1px thickness & stretch).
This allows to just write <hrule/> instead of <hrule><dummy/></hrule>.
One can still use <hrule><pref-height>3</pref-height></hrule>, of course.
layout.cxx: drop silly do??Box calls for hrule/vrule (yes, I wrote that :-)
discard the display part. The curly braces wouldn't be spoken anyway,
and the | would be spoken as "vertical bar", which is completely
useless (which is why it had been disabled in the past already).
"Implement 'flightplans' for AIShips. This patch also introduces the concept
of a 'WAIT' token for AIShips: when the flightplan reaches a 'WAIT', the
AIShip stops and pauses for the specified time (secs)."
"""
Fix Y2K bug triggering string overflow
sim_control_.date_string is a char[7], so it can contain "yymmdd" and
the terminating '\0'. However, nowtime->tm_year is 107 for the year 2007,
so you'll end up with a 7 digit number and the string written to
sim_control_.date_string is longer than sim_control_.date_string is.
Ouch!
"""
mf: ... and sim_control_.date_string isn't even used.
