This patch creates a seperate scene graph for the cockpit. The near plane is
only moved up when in the interior (pilot) view. This is because with
rounding (I presume) it the visible ground is a bit up higher than it is with
the older nearplane setting. Not much, but it is enough to bury the wheels.
I suspected this might be true but spliting to two sg's confirms it. If
necessary we can adjust the model up a bit when in interior view. This might
be good so we can set the near plane even closer when in the cockpit (its
still at 0.2m).
In general this looks a lot better on my Voodoo with this patch. No
perceptibel change in frame rate on my system. In terms of future plans I'd
see the sense in making the model plug into either scene. This will be
necessary when we have multiple model instances in the frame.
The matrix doesn't define some cells, which are actually used
in the multiplication. That makes the result unpredictable.
I have no idea if 0.0 is the correct value for these, but
garbage is hardly the correct value either. Should some of them
be set to 1.0?
Think my brain is getting clogged with matrices :-). Well I've got the funky
orientation offset bug out of the model code. In the process the model.cxx
got optimized a bit. At some point we'll need to liberate model.cxx from the
viewer class, but it is no longer hard coded to access the "pilot view" to
get it's data. Instead it uses whatever the "current" view happens to be. I
may try and do that final bit of having models rotate independant of the view
tomorrow night, or start right in on the viewmgr and get a tower view up and
running. You guys have any preference? My brother's family is coming to
visit for a few days so what I don't get done tomorrow night probably won't
get done until after the weekend.
Fix FGViewer::update so that pitch offset and goal pitch offset work
together nicely (the offset was snapping to 90/-90 when only one of
the two was changed).
Viewer improvements from Jim Wilson:
These files get the 3d cockpit working and fix a few issues in the viewer
code.
XYZ offsets are now defined as follows: X -left/right+ (along wing axis), Y
-up/down+ perpendicular to the aircraft, Z is -in/out+ the aircraft's body axis.
I've also done some cleaning up of unused and mostly unusable interfaces,
added commentary to the *.hxx, combined together some duplicate code and
eliminated a couple unecessary operations. I also moved what was left of the
"protected" zone to "private" since we aren't subclassing this anymore.
(mainly in src/Input/input.cxx) will make src/GUI/mouse.cxx obsolete
and bring the mouse into the same input system as the joystick and
keyboard. This is just preliminary work allowing, covering mouse
clicks (no motion yet), and it actually crashes on a middle or right
click.
The new mouse support is disabled by default until it become stable;
to try it out, you need to configure --with-new-mouse.
Description:
This update includes the new viewer interface as proposed by David M. and
a first pass at cleaning up the viewer/view manager code by Jim W.
Note that I have dropped Main/viewer_lookat.?xx and Main/viewer_rph.?xx and
modified the Makefile.am accordingly.
Detail of work:
Overall:
The code reads a little easier. There are still some unnecessary bits in
there and I'd like to supplement the comments in the viewer.hxx with a tiny
bit on each interface group and what the groupings mean (similar but briefer
than what you emailed me the other day). I tried not to mess up the style,
but there is an occasional inconsistency. In general I wouldn't call it done
(especially since there's no tower yet! :)), but I'd like to get this out
there so others can comment, and test.
In Viewer:
The interface as you suggested has been implemented. Basically everything
seems to work as it did visually. There is no difference that I can see in
performance, although some things might be a tiny bit faster.
I've merged the lookat and rph (pilot view) code into the recalc for the
viewer. There is still some redundancy between the two, but a lot has been
removed. In some cases I've taken some code that we'd likely want to inline
anyway and left it in there in duplicate. You'll see that the code for both
looks a little cleaner. I need to take a closer look at the rotations in
particular. I've cleaned up a little there, but I suspect more can be done
to streamline this.
The external declaration to the Quat_mat in mouse.cxx has been removed. IMHO
the quat doesn't serve any intrinsic purpose in mouse.cxx, but I'm not about
to rip it out. It would seem that there more conventional ways to get
spherical data that are just as fast. In any case all the viewer was pulling
from the quat matrix was the pitch value so I modified mouse.cxx to output to
our pitchOffset input and that works fine.
I've changed the native values to degrees from radians where appropriate.
This required a conversion from degrees to radians in a couple modules that
access the interface. Perhaps we should add interface calls that do the
conversion, e.g. a getHeadingOffset_rad() to go along with the
getHeadingOffset_deg().
On the view_offset (now headingOffset) thing there are two entry points
because of the ability to instantly switch views or to scroll to a new view
angle (by hitting the numeric keys for example). This leaves an anomaly in
the interface which should be resolved by adding "goal" settings to the
interface, e.g. a setGoalHeadingOffset_deg(), setGoalPitchOffset_deg(), etc.
Other than these two issues, the next step here will be to look at some
further optimizations, and to write support code for a tower view. That
should be fairly simple at this point. I was considering creating a
"simulated tower view" or "pedestrian view" that defaulted to a position off
to the right of whereever the plane is at the moment you switch to the tower
view. This could be a fall back when we don't have an actual tower location
at hand (as would be the case with rural airports).
ViewManager:
Basically all I did here was neaten things up by ripping out excess crap and
made it compatible as is with the new interface.
The result is that viewmanager is now ready to be developed. The two
preexisting views are still hardcoded into the view manager. The next step
would be to design configuration xml (eg /sim/view[x]/config/blahblah) that
could be used to set up as many views as we want. If we want to take the easy
way out, we might want to insist that view[0] be a pilot-view and have
viewmanager check for that.
interface instead of string. This will result in a lot more
efficiency later, once I add in a simple hash table for caching
lookups, since it will avoid creating a lot of temporary string
objects. The major considerations for users will be that they cannot
use
node->getName() == "foo";
any more, and will have to use c_str() when setting a string value
from a C++ string.
inclueded in some of the files. Irix doesn't have cout in the std class,
so I changed it to "cout" and included SG_USING_NAMESPACE(std) at the
beginning of the files.
And some minor warning cleanups.
fixed this when I made the mistake the first time.
The view code wasn't properly handling the transition across tile
boundaries so we'd get a 'flash' of the scene wrongly transformed for
one frame at every tile boundary crossing. This is what
scenery.get_next_center() is for.
separate header file. This change will help integrate properties into
JSBSim.
Also, I (David Megginson) removed most of the SimGear include
statements from globals.hxx, reducing the amount of recompilation
every time SimGear changes. This required making minor changes to a
lot of files that were depending on the side-effects of the inclusions
in globals.hxx.
- implement the standard FGSubsystem interface, for consistency
- eliminate current_autopilot and add get/set_autopilot to FGGlobals,
for consistency
- use private methods rather than static functions for tying
properties
There should be no change in functionality.
is a work in progress and needs severe enhancement before it will be
useful. It provides a UDP data channel that goes both ways between
flightgear and the fdm. It also provides a TCP 'command' channel so
flightgear can 'reliably' send commands to the remote fdm (such as set
starting position, reset on ground, etc.)
This seems to pretty much correct the problem. Part of the problem is that
rotations are occuring at the firewall (model origin) which seems a little
un-natural inside the cockpit. The rest of the problem is I am just learning
how this stuff works (I know I've been saying this for a couple months
now...but hey I'm slow :-)).
created a new class, FGViewPoint (declared in viewer.hxx) that holds a
single position in FlightGear coordinates, and have used it to factor
a lot of the common code out of viewer_lookat.cxx and viewer_rph.cxx.
I don't know whether this new class will stay or not; it might just be
a temporary step, or it might end up taking over much of the current
viewer functionality. It would be a bad idea to code against it right
now.
plane to 0.2; otherwise, use the old defaults.
This is a temporary step that will allow me to work on a 3D cockpit
without breaking current behaviour; the final approach will be to put
the 3D model in its own scene graph, with different clipping plane.
and soon to be renamed) is true, FlightGear will draw the 3-D model
even in internal view. This makes sense right now only with the C310
model, since the others don't have any kind of interiors modeled and
all surfaces in all models are one-sided.
This isn't quite working yet -- the view code is very hard to
disentangle, and currently, if the view is not forward, roll and pitch
are applied incorrectly. It looks interesting (modulo a messy model)
on the ground, in level flight, or looking straight ahead under any
other flight conditions.
to 10m after takeoff, but that doesn't really make sense any more,
especially if models are going to have interior views. Is there any
real saving in pushing the near plane out anyway?
was some confusion between degrees and radians which would lead to a huge
goal_view_offset value. The display would sit and spin for a *long* time
trying to wind it's way up to this large value.
command will save *all* properties, rather than just those marked as
archivable. This feature was requested by Tony Peden to make it
easier to write documentation on the properties, but it should also be
useful for debugging. There is currently no default binding for the
command with the write-all parameter set to true.
What the attached patch does is map your panel definition onto a (non
z-buffered) quad in front of your face. You can twist the view around
and see it move in the appropriate ways.
Apply the patch (let me know if folks need help with that step), and
then set the /sim/virtual-cockpit property to true. You can do this
on the command line with --prop:/sim/virtual-cockpit=1, or via the
property picker. Bind it to a key for fast toggling if you like.
The default bindings don't allow for "panning" the view, so you'll
have to modify yours. These are the mappings to my joystick's hat
switch, for those who need hints:
<axis n="6">
<desc>View Direction</desc>
<low>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/view/goal-offset-deg</property>
<step type="double">1.0</step>
</binding>
</low>
<high>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/view/goal-offset-deg</property>
<step type="double">-1.0</step>
</binding>
</high>
</axis>
<axis n="7">
<desc>View Elevation</desc>
<low>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/view/goal-tilt-deg</property>
<step type="double">1.0</step>
</binding>
</low>
<high>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/view/goal-tilt-deg</property>
<step type="double">-1.0</step>
</binding>
</high>
</axis>
While the current implementation is happy with just plastering the
panel's notion of "screen" into the 3D world, this is actually more
general. Each panel can, in principle, have it's own coordinate
system, and you could build a cockpit out of a bunch of them. The
mapping is specified by providing a 3D coordinate for three corners of
the quad the panel should be mapped to; this should be pretty simple
to work with.
All that's needed for a perfectly general solution is a convention on
where to store the information (a cockpit xml file, or put it in the
aircraft -set file, or...), and some work on the panel's coordinate
system conventions (some of which don't coexist very nicely with a
generalized 3D environment). Combine that with a plib model for the
non-panel interior of the cockpit, and we're golden.
I'm actually really pleased with this. It worked better and more
quickly than I could have imagined, and impact on the surrounding code
is quite light -- a few property tests only. But some stuff is still
missing:
+ No equivalent work was done to the HUD, so it still displays
incorrect headings when the view changes. The use of pixel
coordinates deep in the HUD code is going to give me fits doing the
port, I sure. It's not nearly so well put together as the panel
(where I just changed the setup code -- none of the rendering code
changed at all).
+ I forgot that the panel was clickable. :) Input events still have
the screen coordinates, which essentially kills the interactivity
when in virtual cockpit mode. This won't be hard to fix; it's only
broken because I forgot the feature existed.
And one note about the implementation choice: to get away from the
inevitable near clip plane issue, the virtual cockpit renderer simply
disables the z buffer. This means that cockpits built using these
panels need to be z-sorted, which isn't too hard since they are static
geometry. It also means that no two "virtual panels" can ever be
allowed to interpenetrate. No biggie.
actually very powerful when combined with factor and offset -- for
example, on the C310 model the nose wheel can now retract completely
before the doors start closing.
subsystem to Flightgear. No more functionality is implemented
than at present (apart from an ATIS bug-fix - station wouldn't
change if the radio was switched directly from one station to
another) but it is much neater than the current hack and should be
easily extendable.
Some cruft is still probably left over in radiostack.[ch]xx such as
the bindings to the comm frequencies but I'll leave removing those
until I'm sure they're not needed there.
newauto.cxx. Basically everything is the same functionally except for a
changed in the initial altitude setting to 3000ft instead of meters (the panel
is in feet).
individual aircraft to have different sounds (and cleaning up my code
a fair bit). The most important user-visible change is the renaming
of the /sim/sound property to /sim/sound/audible.
(other than "none") is "spin", which must be tied to a property giving
a value in RPM. This gets the DC-3 propellers turning. The next type
will be "rotation", which will allow the flaps, elevators, ailerons,
and rudders to move (and even gear, eventually). Later, I'll add
"shift" for sliding things around, and will figure something out for
blinking lights.
the XML file, including the path to the 3D file.
This change obsoletes the existing /sim/model/*-offset-deg and
/sim/model/*-offset-m properties in the main property tree, and
replaces them with /offsets/*-deg and /offsets/*-m in the model
property file. The /path property in the model XML file is relative
to the XML file's location rather than FG_ROOT.
Added two new properties:
/environment/temperature-sea-level-degc
/environment/pressure-sea-level-inhg
These are now supported in FGEnvironment as well, though they always
have the same value for now. They need to be hooked up to the FDMs.
different locations, and hitched it into FGGlobals. FGEnvironmentMgr
has taken over as the subsystem, while FGEnvironment is simple the
information that it returns. I've removed current_environment
completely -- everything now uses properties or goes through
FGGlobals. FGGlobals itself has a couple of useful methods:
const FGEnvironment * get_environment ();
const FGEnvironment * get_environment (double lat, double lon, double alt);
The first one returns the environment data for the plane's current
position, while the second returns the environment data for any
arbitrary location. Currently, they both return the same information,
but that will change soon.
properties have been renamed from wind-(north|east|down)-fps to
wind-from-(north|east|down)-fps, and the FDMs modified appropriately.
No other changes should be visible unless FG_OLD_WEATHER is defined.
Attached are patches for adding the command line options to set initial
glideslope and climb rate. This was really easy to do as all the pieces
were in place. It works well with JSBSim because the trimming routine
finds the right throttle and elevator settings. It should work with
LaRCsim as well, but it has no trimming routine so there will be some
dynamics at startup. I don't know what YASim will do.
via the command line (--enable-clock-freeze / --disable-clock-freeze)
and can be toggled during a run. However this property is not currently
bound to any menu or keystroke so you have to do it via the gui property
interface or externally via the web property browser or a script.
are being driven from an external data source.)
Akso found and fixed a bug in the simgear that caused the time to go goofy
temporarily while scenery was being loaded.
max(width, height) by default (easily changeable) rather than just width.
(src/GUI/gui.cxx, src/Main/main.cxx, src/Main/viewer.cxx, src/Main/viewer.hxx)
This works on a CygWin build, and probably works on non-Cygwin builds
as well.
2. Enable FG to start even if audio is not available. (soundmgr.cxx)
Avoids the FGSoundMgr constructor crashing; the rest of FG then runs
OK without sound.
1. Enable auto-configure on more versions of auto tools. (configure.in)
2. Warnings from auto-configure tools. (src/Time/Makefile.am)
3. Typo: "the it's" -> "its". (docs-mini/README.Joystick)
4. Remove definition of FGViewer::update() that now is (or can be) pure
virtual\
. (src/Main/viewer.cxx)
5. Preferred form of function name according to comments in plib:
"not_working"\
-> "notWorking". (src/Sound/soundmgr.hxx)
/sim/freeze/master (implimented)
/sim/freeze/fuel (implimented)
/sim/freeze/position (not implimented)
/sim/freeze/time-of-day (not implimented)
/sim/freeze/master is bound to the 'p' key via keyboard.xml, however,
/sim/freeze/fuel is not bound to anything at the moment so you must
change it via the external property interface, or specify an initial
value on the command line.
properties /sim/view/view-tilt-deg and /sim/view/goal-view-tilt-deg
control the tilt. There are (temporarily) keyboard bindings in the
base package for experimentation: Ctrl-O to tilt the view down, and
Ctrl-P to tilt the view up.
FDM people. FlightGear now supports an unlimited number of fuel
tanks. Also added correct fuel-flow reporting for piston engines, and
tracked new features in SimGear property support.
other -- it is now possible to set properties at startup (such as an
autopilot altitude). The only user-visible change, other than the
fact that the properties work as they are supposed to, is that the
heading bug no longer starts at a random value.
function to allow property files as non-option parameters after the
options have finished (and added "--" to terminate options). It's now
possible to do something like
fgfs denver-am.fgd
or even
fgfs at-lax.fgd in-c310.fgd around-sunset.fgd
This works the same way as the --config option, but will be friendlier
for GUIs, where start-up situation files can now be associated easily
with FlightGear.
material-specific logic is now removed from the material library and
encapsulated in the material class itself, and materials are loaded
from $FG_ROOT/materials.xml rather than $FG_ROOT/materials. This also
removes a nasty bug in the old material-loading code that caused a
floating-point exception.
- automake-1.4 sets default values for INCLUDES which we can't
overwrite.
- automake-1.5 renames this to DEFAULT_INCLUDES and leaves INCLUDES
open for the developer to use.
Thus for automake-1.4 we are forced to 'append' to INCLUDES and in
automake-1.5 we can just set the value to whatever we like.
Unfortunately, the behaviors of the two versions are mutually
incompatible.
The solution I am committing now works for both versions but
automake-1.5 generates a lot of spurious warning messages that are
annoying, but not fatal.
(i.e. multiloop). Most subsystems currently ignore the parameter, but
eventually, it will allow all subsystems to update by time rather than
by framerate.
beginning of main() for the exceptions that can be enabled (only
divide-by-zero is enabled by default, but you can uncomment any ones
you want); eventually, FlightGear should run cleanly with all FPEs
enabled.
(i.e. multiloop). Most subsystems currently ignore the parameter, but
eventually, it will allow all subsystems to update by time rather than
by framerate.
These will log trace messages whenever a specific property value is
read or written through the property manager. They do not cause
FlightGear to poll bound values, so if a class variable that is bound
is changed directly, no trace message will be displayed.
These options are also useful in conjunction with a debugger.
--trace-read will cause the private SimGear SGPropertyNode::trace_read
method to be invoked, and --trace-write will cause the private SimGear
SGPropertyNode::trace_write method to be invoked; in a debugger
session, a user can set breakpoints on these methods then get a
backtrace to see what specific points in the code are reading or
writing properties.
works like this:
1. Parse preferences.xml, which will usually specify a default
aircraft using the /sim/aircraft property.
2. If /sim/aircraft is specified and not empty, parse the properties
in $FG_ROOT/Aircraft/{/sim/aircraft}-set.xml to set up a default
aircraft.
3. During command-line parsing, whenever the --aircraft option appears
set /sim/aircraft appropriately and parse the properties in
$FG_ROOT/Aircraft/{/sim/aircraft}-set.xml. Any --config, --prop, or
--aircraft options afterwards will take precedence.
more intuitive. We switch to an include in the preferences.xml to include
the default model, and then if the user specifies --aircraft=, that is
expanded immediately so portions can be overwritten by subsequent command
line options.
Here's an unusual patch for FlightGear -- I've created .cvsignore
files for every source directory, to make CVS output more informative.
This is especially nice when using cvs-examine from (X)Emacs to look
for changes.
a top level aircraft def file (c172-set.xml)
preferences.xml or --aircraft= or any other property setting mechanism can
be used to set the property "/sim/aircraft". After all options and config
files are parsed, the contents of /sim/aircraft is expanded into a *-set.xml
file and loaded.
- delete table in destructor
** src/FDM/flight.cxx
- bind engine properties in FGInterface::bind, and publish properties
for all engines rather than just engine 0
** src/Main/fg_props.cxx
- removed all engine properties; now bound in FGInterface::bind
** src/Sounds/fg_fx.cxx
- support multiple engine and cranking sounds
** src/Sounds/fg_fx.hxx
- support multiple engine and cranking sounds
to control logging
- /sim/logging/classes takes a value like "terrain|astro", where the
names are the macros from simgear/debug/debug_types.h with the
initial "SG_" removed and converted to lower case; for none, use
"none"
- /sim/logging/priority takes a single name like "warn", where the
name is a macro from simgear/debug/debug_types.h with the initial
"SG_" removed and converted to lower case
fix startup sequence problems where we initialize the FDM before we know
the desired starting altitude.
These changes delay fdm initialization until the local tile has been loaded
and we can do a real intersection and find the true ground elevation.
In order to do this, I depend more on the property manager as glue, rather
than the FGInterface.
There are some glitches still when switching to a new airport or reseting
the sim. I will work on addressing these, but I need to commit the changes
so far to keep in sync with other developers.
meaning of "win_ratio". I've removed win_ratio and added fov_ratio and
aspect_ratio, as it seems both are needed.
n.b. The multi-line changes in fgReshape comprise:
extracting common code,
removing an apparently arbitrary "+1" on the view height,
changing "set_win_ratio" to "set_aspect_ratio".
through the controls interface and the running and cranking flags through
the engine interface. This has no current effect on LaRCsim (other than
to make the code neater) but is necessary to add engine startup to JSBSim
which is now underway. I've also put in main.cxx which escaped getting
committed in the previous round of changes - adding this will add
the cranking sound to LaRCsim during engine startup.
one I sent yesterday. I have re-zipped all four files so you can
neglect the last lot but only io360.cxx has changed if you've
already committed. It's untested since I can't start the engine until
John has committed his update with separate properties. Should
work fine though.
- use guiErrorMessage
- added new properties /sim/view/pilot/x-offset-m,
/sim/view/pilot/y-offset-m, and /sim/view/pilot/z-offset-m to
control pilot-position offset from CG
I've updated the WeatherDatabase to be able to use only the n closest
stations. This can speed up the initalization dramatically.
To take a benefit from that you need:
- http://129.13.102.67/out/flight/current.txt.gz in
FG_ROOT/weather/current.txt.gz
- --prop:/environment/weather/working-type=internet
- --prop:/environment/weather/max-stations=what_ever_you_want
The WeatherCM stuff now publishes its data in the property system.
/environment/weather/wind-north-mps
/environment/weather/wind-east-mps
/environment/weather/wind-up-mps
/environment/weather/temperature-K
/environment/weather/air-pressure-Pa
/environment/weather/vapor-pressure-Pa
/environment/weather/air-density
are the new properties.
