"Implement 'flightplans' for AIShips. This patch also introduces the concept
of a 'WAIT' token for AIShips: when the flightplan reaches a 'WAIT', the
AIShip stops and pauses for the specified time (secs)."
"""
Fix Y2K bug triggering string overflow
sim_control_.date_string is a char[7], so it can contain "yymmdd" and
the terminating '\0'. However, nowtime->tm_year is 107 for the year 2007,
so you'll end up with a 7 digit number and the string written to
sim_control_.date_string is longer than sim_control_.date_string is.
Ouch!
"""
mf: ... and sim_control_.date_string isn't even used.
done for performance reasons, but print() should be able to output any
valid string, and when SG_LOG uses strings and streams already, then we
can use that here, too. (Not discussed with Andy yet.)
before the property tree is stored away for reinit, so the signal would
be emitted again on reset.
- fix inconsistent style that sneaked in with a previous patch
in $FG_ROOT/Nasal/* were loaded and executed, and thus all Nasal library
functions are available. This was in the past only done with settimer(..., 0),
constructions, but suchlike triggered timer functions are executed
*after* aircraft specific Nasal files were loaded, so they can't be
used for internal library initialization, where e.g. props.Node() is
already needed.
"""
- ground properties (e.g. feel bumpiness and the reduced friction of
grass or go swimming with the beaver)
- initial load for yasim gears (to get rid of the jitter the beaver has
on ground)
- glider/winch/aerotow (do winch start with YASim glider or do aerotow
over the net) I will place a how-to on the wiki soon, here very short:
use the sgs233y (or the bocian if you have AJ (up ot now) non-GPL
bocian)
winch start: Ctrl-w for placing the winch, hold w to winch, press
Shift-w to release the tow
aerotow: Place the glider within 60m to a MP-aircraft, press
Ctrl-t to tow to this aircraft. If the MP-aircraft is the
J3 and the patch is installed on both sides, the J3 feels the
forces, too. The J3-pilot has to taxi very slow up to the
moment, the glider starts moving. Increase the throttle gently.
Don't lift the J3 early, wait for the glider being lifted,
lift gently.
"""
(including all subdirs and with max depth!), but only the outmost level.
There are no *-set.xml files in deeper nested dirs, and with an ever growing
number of aircraft the search just lasts too long.
Here is a patch for two bugs in the AI/multiplayer part:
1. Cannot find model file *.ac error message (was only a false message,
anything worked correctly, the model was loaded from the correct path
afterwards).
2. Often many multiplayer aircrafts are missing in the property-tree.
(but I need them for aerotowing). There is still another bug: The
property in some circumstances seems not to be cleaned up after logout
of a multiplayer. I have added a workaround for this, but I don't now,
if it 100% works (should have no side effects, just aerotow would not
work sometimes). For testing I need more traffic on the mp-server.
src/Input/input.cxx src/Main/renderer.cxx
src/Main/renderer.hxx src/Scenery/scenery.cxx
src/Scenery/scenery.hxx: Move scenery picking into the renderer.
There is most of the required data defined. Also we can better use
the pick visitor that will be needed with th upcommung panel code.
src/FDM/groundcache.cxx src/FDM/groundcache.hxx: Store the material
that was used to get the croase agl level and return that material
in case we need to make use of that croase value.
options.cxx: Olaf Flebbe: Fix some problems with --help --verbose
caused by the usage of snprintf. Elimate snprintf usage in favour
plain std::string manipulations.
data/AI/Aircraft/*/*.xml and read traffic information from these files.
Current code still mimicks old behavior by reading data/Traffic/fgtraffic.xml
The latter functionality will be disabled once we have some traffic containing
files in data/AI/Aircraft.
earth model instead of WGS84. WGS84 precision is overkill for what the
traffic manager requires, and also keeps locking up while computing
course and distance for anti podal points in New Zealand vs. south west
france.
utils/Modeller/Makefile.am src/FDM/YASim/Makefile.am:
Remove -lssg from the linker lines.
Do no longer build threedconvert. A very similar functionality
is available with osgvconv. But leave threedconvert in place
if somebody will need that ...
I found a small conspicuity in YASim. The destructor of the fdm was
never called, therefore a modification of the heli fdm (not in cvs) did
not work after reset (I tie some properties and untie them in the
destructor, but the destructor was not called and the tieing failed
after reset. I don't know if any other parts of YASim need their
destructors, at least it wastes memory.
Another small fix I have made to the turbulence.cpp. The code needed,
that (a-floor(a)) is >=0 and <1. This is analytical correct, but
numerical only for "small" values. In normal fg-operation a in this
function is always small, but with unrealistic parameters in the
aircraft config file it is not and then fg crashes (instead a crash of
the aircraft or cataputling it far away).
"bind the visibility-property of the SGSky object to a property
named /envirionment/effective-visibility-m. This property is needed to decide
if the aircraft is within clouds or not. I use this property also for the
structural icing code."
- Ground network slow-down finally works as expected
(although occasionally causing a traffic jam)
- Hold position instruction now really sets speed to zero, in addition
it actually works now for crossing and two-way traffic
- Attempt to limit execution time of ground network trace algorithm
to make performance acceptable at high-density networks
- Removed remaining terminal messages
- Various minor tweaks and clean-ups
Time/tmp.cxx Main/viewer.hxx Main/viewer.cxx Main/renderer.cxx
Get rid of an other OSGFIXME. The view matrix had some plib specials
included. The viewer is now updated for that.
a second tacan may not be likely)
- remove some dead code
- simplify <name>/<number> handling
- let a listener watch over input props and search for new channel/frequency
- allow to set channel number as one number (rather than as single digits),
as some aircraft may prefer this (the ch53 does so); this is to be set
in /instrumentation/tacan[n]/frequencies/selected-channel[0]
it was never added, which is perfectly normal when the aircraft started
out of range. (Analog to the DME sound, which doesn't have that warning
either.)
value on a property. This becomes a NaN when converted to a numeric
value, which then percolated into the C++ world where it ultimately
caused a crash in YASim's turbulence code. While converting nil to
NaN isn't *strictly* wrong, it's dangerous for this reason. Toss a
Nasal exception instead. Hopefully this won't break too much
preexisting code.
- Moved AIModels/Traffic Manager related AI functions to a new file
- Rewrote the traffic manager so that the containers use pointers to
objects instead of the objects themselves, which will allow for a
more flexible memory management.
- Rewrote parts of the airport groundnetwork code, also because the
stl containers now contain object pointers instead of the objects
themselves.
- Fixed an uninitialized iterator in the AI distance tracking code
- Fixed flawed logic in some of the traffic controller's while loops
- Added a tower controller, which paces take-off behavior of AITraffic
in a more realistic way.
- Various other minor fixes and fine tuning.
More realistic calculation of vortices at the blades and therefore
real airfoil parameters can be used now (not to be mixed up with the
vortex ring state which is still not simulated), ground effect is now
continuous e. g. at buildings, calculating of the rotor in more than 4
directions, better documentation of the airfoil parameters.
- Well I finally licked it, the clipping works great now, in 16 and 32
bpp mode, on 2d and 3d panels.
- I tried glScissors, didnt work because clipping was done in screen
co-ordinates.
- Stencil buffer methods worked great for 2d panel, but messed up 3d
panels,(depth buffer problems I think), and only worked in 32 bpp mode.
- I then tried clip planes , and so far it appears to work with no
problem, and no framerate drop like I had with the stencil buffer
method...
I'm attaching the panel.cxx file for testing...
values that were angles between the aircraft's orientation and the
global velocity vector, not the airflow velocity. So the HUD velocity
vector was wrong when the wind was non-zero. Fix that.
maintain a resonable distance from each other while taxiing on the same
route. The current code does not yet take crossing routes or aircraft
taxiing into opposite directions into account.
If there is a windows problem, look very carefully at the line termination
with a serial port monitor. It should be \r\n (CR-LF), not \n, not \r\r\n
or any other possible variant.
format. I have a Garmin 295 to test with, but so far I haven't been able
to make this work (code should compile cleanly though.) I don't know if
I've made a mistake in the protocol or if my 295 just doesn't support this.
More work on this to come.
- NEVER EVER use leading underscores for auto variables
- don't store values in auto variables for the next function call (not
even when they start with underscore :-) This fixed the TACAN
channel lookup, which was supposed to be done on channel changes only,
but was always done)
- only do frequency search if frequency has changed (this was apparently
planned, but not finished; leftover from adf.cxx?)
- don't use double as bool switch
- some minor cleanup
algorithm caused a program crash. Because there is always one waypoint more
than there are routes, the trace function should only pop_back the final route
entry at search depths of one or higher. I also added a lot of of additional
safeguarding code, due to the fact that the new trace algorithm was
apparently not as stable as I'd hoped it would be. ...
in the case of fg_init.cxx we'll only see that if the log-level is set
in preferences.xml, because command line options weren't even processed
at that time. :-/
