This patch creates a seperate scene graph for the cockpit. The near plane is
only moved up when in the interior (pilot) view. This is because with
rounding (I presume) it the visible ground is a bit up higher than it is with
the older nearplane setting. Not much, but it is enough to bury the wheels.
I suspected this might be true but spliting to two sg's confirms it. If
necessary we can adjust the model up a bit when in interior view. This might
be good so we can set the near plane even closer when in the cockpit (its
still at 0.2m).
In general this looks a lot better on my Voodoo with this patch. No
perceptibel change in frame rate on my system. In terms of future plans I'd
see the sense in making the model plug into either scene. This will be
necessary when we have multiple model instances in the frame.
The matrix doesn't define some cells, which are actually used
in the multiplication. That makes the result unpredictable.
I have no idea if 0.0 is the correct value for these, but
garbage is hardly the correct value either. Should some of them
be set to 1.0?
Think my brain is getting clogged with matrices :-). Well I've got the funky
orientation offset bug out of the model code. In the process the model.cxx
got optimized a bit. At some point we'll need to liberate model.cxx from the
viewer class, but it is no longer hard coded to access the "pilot view" to
get it's data. Instead it uses whatever the "current" view happens to be. I
may try and do that final bit of having models rotate independant of the view
tomorrow night, or start right in on the viewmgr and get a tower view up and
running. You guys have any preference? My brother's family is coming to
visit for a few days so what I don't get done tomorrow night probably won't
get done until after the weekend.
The compiler complains about too long names for instanciated templates
that result in name truncation. There are warnings but finally it ends
with a fatal errors. I found that ignoring the warning cure the
problem.
as a follow-up of my previous message, I found that in panel.cxx, function
const char *FGTextLayer::Chunk::getValue () const, there is the use of a
member variable _buf that seems to be uninitialized.
When the loop starts, n.type is still undefined, so the while statement
depends on unitialized garbage. The input operator cares for the [End]
bracket anyway (returns if the first character is a '['). So it is safe
to check for it after reading the line and break if necessary.
The first hunk might not be necessary, but the light_coverage property
was the only one that wasn't explicitly defaulted, which is unfair. ;-)
The second hunk adds the missing initialization to the init routine.
This is necessary, because (unlike the material entries from material.xml)
the generated light entries don't get the light coverage set. Yet
obj.cxx:795 reads this information out fot every leaf, although not needed
in the case of lights. Avoiding this isn't worth the trouble.
The last hunk sets the missing normal_index. The POINTS branch in
gen_leaf was always called with this int_list empty, which made the normals
handling use data garbage.
It seems that the airport database was changed some day and the End?Flags
changed from floats to strings. The database definition, though, was not
adapted and still created number entries. Reading out these flags led to
access to memory, that was never initialized. While it didn't cause crashes
during normal use, it actually caused one when I ran fgfs in ddd. Seems,
that the concerned memory region wasn't zeroed out then and hence uncovered
the bug.
Of course, the runways.mk4 database has to be re-created with the new
definitions.
Fix FGViewer::update so that pitch offset and goal pitch offset work
together nicely (the offset was snapping to 90/-90 when only one of
the two was changed).
Viewer improvements from Jim Wilson:
These files get the 3d cockpit working and fix a few issues in the viewer
code.
XYZ offsets are now defined as follows: X -left/right+ (along wing axis), Y
-up/down+ perpendicular to the aircraft, Z is -in/out+ the aircraft's body axis.
I've also done some cleaning up of unused and mostly unusable interfaces,
added commentary to the *.hxx, combined together some duplicate code and
eliminated a couple unecessary operations. I also moved what was left of the
"protected" zone to "private" since we aren't subclassing this anymore.
(mainly in src/Input/input.cxx) will make src/GUI/mouse.cxx obsolete
and bring the mouse into the same input system as the joystick and
keyboard. This is just preliminary work allowing, covering mouse
clicks (no motion yet), and it actually crashes on a middle or right
click.
The new mouse support is disabled by default until it become stable;
to try it out, you need to configure --with-new-mouse.
for fuselage Surface objects. If the fuselage wasn't aligned perpendicular
to the Y axis, the matrix wouldn't be orthonormal. Since all of, perhaps,
three aircraft have ever been built this way, it's doubtful I would have
found this as a bug report. :)
Description:
This update includes the new viewer interface as proposed by David M. and
a first pass at cleaning up the viewer/view manager code by Jim W.
Note that I have dropped Main/viewer_lookat.?xx and Main/viewer_rph.?xx and
modified the Makefile.am accordingly.
Detail of work:
Overall:
The code reads a little easier. There are still some unnecessary bits in
there and I'd like to supplement the comments in the viewer.hxx with a tiny
bit on each interface group and what the groupings mean (similar but briefer
than what you emailed me the other day). I tried not to mess up the style,
but there is an occasional inconsistency. In general I wouldn't call it done
(especially since there's no tower yet! :)), but I'd like to get this out
there so others can comment, and test.
In Viewer:
The interface as you suggested has been implemented. Basically everything
seems to work as it did visually. There is no difference that I can see in
performance, although some things might be a tiny bit faster.
I've merged the lookat and rph (pilot view) code into the recalc for the
viewer. There is still some redundancy between the two, but a lot has been
removed. In some cases I've taken some code that we'd likely want to inline
anyway and left it in there in duplicate. You'll see that the code for both
looks a little cleaner. I need to take a closer look at the rotations in
particular. I've cleaned up a little there, but I suspect more can be done
to streamline this.
The external declaration to the Quat_mat in mouse.cxx has been removed. IMHO
the quat doesn't serve any intrinsic purpose in mouse.cxx, but I'm not about
to rip it out. It would seem that there more conventional ways to get
spherical data that are just as fast. In any case all the viewer was pulling
from the quat matrix was the pitch value so I modified mouse.cxx to output to
our pitchOffset input and that works fine.
I've changed the native values to degrees from radians where appropriate.
This required a conversion from degrees to radians in a couple modules that
access the interface. Perhaps we should add interface calls that do the
conversion, e.g. a getHeadingOffset_rad() to go along with the
getHeadingOffset_deg().
On the view_offset (now headingOffset) thing there are two entry points
because of the ability to instantly switch views or to scroll to a new view
angle (by hitting the numeric keys for example). This leaves an anomaly in
the interface which should be resolved by adding "goal" settings to the
interface, e.g. a setGoalHeadingOffset_deg(), setGoalPitchOffset_deg(), etc.
Other than these two issues, the next step here will be to look at some
further optimizations, and to write support code for a tower view. That
should be fairly simple at this point. I was considering creating a
"simulated tower view" or "pedestrian view" that defaulted to a position off
to the right of whereever the plane is at the moment you switch to the tower
view. This could be a fall back when we don't have an actual tower location
at hand (as would be the case with rural airports).
ViewManager:
Basically all I did here was neaten things up by ripping out excess crap and
made it compatible as is with the new interface.
The result is that viewmanager is now ready to be developed. The two
preexisting views are still hardcoded into the view manager. The next step
would be to design configuration xml (eg /sim/view[x]/config/blahblah) that
could be used to set up as many views as we want. If we want to take the easy
way out, we might want to insist that view[0] be a pilot-view and have
viewmanager check for that.
interface instead of string. This will result in a lot more
efficiency later, once I add in a simple hash table for caching
lookups, since it will avoid creating a lot of temporary string
objects. The major considerations for users will be that they cannot
use
node->getName() == "foo";
any more, and will have to use c_str() when setting a string value
from a C++ string.
inclueded in some of the files. Irix doesn't have cout in the std class,
so I changed it to "cout" and included SG_USING_NAMESPACE(std) at the
beginning of the files.
And some minor warning cleanups.
and fixes a 'potential bug' if the FGFS View code were to change
I also consolidated the specialized IntersectLeaf()
as they really didn't gain us much outside of their having
'more direct access into the SSG controlled data'
I would like to see the fgCurrentElevation functions moved
out of hitlist.cxx.
The one obstacle is their being dependent on my PLib
auxillary functions
ssgGetEntityTransform()
ssgGetCurrentBSphere()
code has been run through astyle with the default options
fixed this when I made the mistake the first time.
The view code wasn't properly handling the transition across tile
boundaries so we'd get a 'flash' of the scene wrongly transformed for
one frame at every tile boundary crossing. This is what
scenery.get_next_center() is for.
the property system, among other things. A separate integration into
the FDMs will follow shortly.
This code will be used only if the --with-new-environment option is
*not* passed to configure.
separate header file. This change will help integrate properties into
JSBSim.
Also, I (David Megginson) removed most of the SimGear include
statements from globals.hxx, reducing the amount of recompilation
every time SimGear changes. This required making minor changes to a
lot of files that were depending on the side-effects of the inclusions
in globals.hxx.
- implement the standard FGSubsystem interface, for consistency
- eliminate current_autopilot and add get/set_autopilot to FGGlobals,
for consistency
- use private methods rather than static functions for tying
properties
There should be no change in functionality.
is a work in progress and needs severe enhancement before it will be
useful. It provides a UDP data channel that goes both ways between
flightgear and the fdm. It also provides a TCP 'command' channel so
flightgear can 'reliably' send commands to the remote fdm (such as set
starting position, reset on ground, etc.)
includes the ability to specify per vertex normals rather than depending
the normals list being the same as the vertices list. (Support for
previous binary file format scenery is maintained.)
This seems to pretty much correct the problem. Part of the problem is that
rotations are occuring at the firewall (model origin) which seems a little
un-natural inside the cockpit. The rest of the problem is I am just learning
how this stuff works (I know I've been saying this for a couple months
now...but hey I'm slow :-)).
* Add new trigger types: raise, fall
* Add new trigger offset parameter
* Add new volume/pitch types: inv, abs, sqrt
* Add initial support for multiple events to intervere in a single sound
(by using the same name, see the crank section of 172-sound.xml)
* Cached the volume/pitch type fucntions
(No more if's inside the loops in update())
created a new class, FGViewPoint (declared in viewer.hxx) that holds a
single position in FlightGear coordinates, and have used it to factor
a lot of the common code out of viewer_lookat.cxx and viewer_rph.cxx.
I don't know whether this new class will stay or not; it might just be
a temporary step, or it might end up taking over much of the current
viewer functionality. It would be a bad idea to code against it right
now.
plane to 0.2; otherwise, use the old defaults.
This is a temporary step that will allow me to work on a 3D cockpit
without breaking current behaviour; the final approach will be to put
the 3D model in its own scene graph, with different clipping plane.
OK, attached is a replacement for mouse.cxx that works the view using
the view-offset/tilt interface, rather than the (kinda odd) GuiQuat
stuff. It's kind of a hack job, as I left the hooks to GuiQuat in in
other places for fear of breaking something. Still, it removed more
code from mouse.cxx than it added, which has to count for some
elegance points.
Oh yeah, I forgot to send that one along. This one is my bug, I
goofed the precedence in the fgPanelVisible() function in panel.cxx
such that the panel was *always* visible if virtual cockpit was
enabled. Here's a replacement. I've modified the style from a single
boolean expression to an if-list, since that's more readable to my
eyes for expressions this big:
and soon to be renamed) is true, FlightGear will draw the 3-D model
even in internal view. This makes sense right now only with the C310
model, since the others don't have any kind of interiors modeled and
all surfaces in all models are one-sided.
This isn't quite working yet -- the view code is very hard to
disentangle, and currently, if the view is not forward, roll and pitch
are applied incorrectly. It looks interesting (modulo a messy model)
on the ground, in level flight, or looking straight ahead under any
other flight conditions.
