1
0
Fork 0
Commit graph

952 commits

Author SHA1 Message Date
frohlich
a498181ac1 Modified Files:
src/FDM/YASim/Launchbar.cpp: Olaf Flebbe:
	Use float consts in float code
2007-01-22 05:36:43 +00:00
mfranz
e71d997c82 Maik JUSTUS: connect fix 2007-01-22 00:10:39 +00:00
mfranz
2105d6744d add fgSetString() stub 2007-01-21 10:48:22 +00:00
mfranz
39269a1bb9 add fgSetString() stub 2007-01-20 22:45:46 +00:00
mfranz
e142aa2d50 fix messages 2007-01-20 22:22:47 +00:00
mfranz
30ba3a09e1 store the node itself as member, not the path 2007-01-20 21:26:07 +00:00
mfranz
5e2f46e232 Maik JUSTUS: update (messages are only temporary and for testing purposes) 2007-01-20 21:08:04 +00:00
ehofman
46d16035fb *** empty log message *** 2007-01-20 10:08:40 +00:00
ehofman
4dbedefb32 Sync w. JSBSim as of 20/01/2007 2007-01-20 09:28:53 +00:00
mfranz
6094d927d3 Maik JUSTUS: export ground material friction factor to property 2007-01-18 21:46:28 +00:00
mfranz
9d98966685 Maik JUSTUS: minor fix for bending patch 2007-01-17 23:38:13 +00:00
mfranz
415fa8332a Maik JUSTUS: adapt some property names to match common style 2007-01-17 22:29:20 +00:00
mfranz
53f09ff6a5 Maik JUSTUS: (OK'ed by Andy)
"""
- ground properties (e.g. feel bumpiness and the reduced friction of
  grass or go swimming with the beaver)
- initial load for yasim gears (to get rid of the jitter the beaver has
  on ground)
- glider/winch/aerotow (do winch start with YASim glider or do aerotow
  over the net) I will place a how-to on the wiki soon, here very short:
  use the sgs233y (or the bocian if you have AJ (up ot now) non-GPL
  bocian)
  winch start: Ctrl-w for placing the winch, hold w to winch, press
               Shift-w to release the tow
  aerotow: Place the glider within 60m to a MP-aircraft, press
           Ctrl-t to tow to this aircraft. If the MP-aircraft is the
           J3 and the patch is installed on both sides, the J3 feels the
           forces, too. The J3-pilot has to taxi very slow up to the
           moment, the glider starts moving. Increase the throttle gently.
           Don't lift the J3 early, wait for the glider being lifted,
           lift gently.
"""
2007-01-17 20:42:39 +00:00
mfranz
15754ccfc1 Maik JUSTUS: rotor bending fix 2007-01-17 20:30:34 +00:00
ehofman
3ec74d79c2 Sync. w. JSB CVS as of 15/01/2007 2007-01-15 12:48:54 +00:00
andy
bb6010f39c Missed changed file somehow, oops. 2007-01-10 19:04:59 +00:00
andy
5aa142ee5f Patch from Joacim to fix a bug where rotor weights were doubled. 2007-01-10 19:03:02 +00:00
andy
23ab95802b Patch from Joacim to export the inertia tensor from the command line solver. 2007-01-10 18:58:50 +00:00
fredb
994c8efa00 Remove useless dependencies on plib and opengl libraries 2007-01-06 19:12:26 +00:00
frohlich
56382700f0 Modified Files:
groundcache.cxx: Return cat start and end in the correct order.
	That makes the seahawk carrier start capable again ...
2007-01-06 16:20:49 +00:00
frohlich
93cb29608a Modified Files:
src/FDM/groundcache.cxx src/FDM/groundcache.hxx: Store the material
	that was used to get the croase agl level and return that material
	in case we need to make use of that croase value.
2007-01-02 09:50:35 +00:00
frohlich
5a48bcf2a0 Modified Files:
src/FDM/flight.cxx src/FDM/flight.hxx src/FDM/groundcache.cxx:
	Maik Justus: Provide the material we roll on in the groundcache.
2006-12-27 10:47:10 +00:00
andy
f04499cdc6 Disable the defaulting of gear friction so the tunables actually work 2006-12-22 18:02:17 +00:00
andy
ef7e7f90dd Patch from Maik adds user-settable scaling constants for per-axis fuselage drag and induced drag. 2006-12-18 21:22:20 +00:00
frohlich
cb62950760 Modified Files:
utils/Modeller/Makefile.am src/FDM/YASim/Makefile.am:
	Remove -lssg from the linker lines.
	Do no longer build threedconvert. A very similar functionality
	is available with osgvconv. But leave threedconvert in place
	if somebody will need that ...
2006-12-17 10:12:38 +00:00
fredb
e48663b87d Prototype of fake functions should match the real ones 2006-12-16 21:40:38 +00:00
curt
5d18c09c08 Maik Justus:
I found a small conspicuity  in YASim. The destructor of the fdm was
never called, therefore a modification of the heli fdm (not in cvs) did
not work after reset (I tie some properties and untie them in the
destructor, but the destructor was not called and the tieing failed
after reset. I don't know if any other parts of YASim need their
destructors, at least it wastes memory.

Another small fix I have made to the turbulence.cpp. The code needed,
that (a-floor(a)) is >=0 and <1. This is analytical correct, but
numerical only for "small" values. In normal fg-operation a in this
function is always small, but with unrealistic parameters in the
aircraft config file it is not and then fg crashes (instead a crash of
the aircraft or cataputling it far away).
2006-12-09 20:37:59 +00:00
frohlich
5d1c390194 Modified Files:
groundcache.cxx: Cheaper ray triangle intersection
2006-11-21 18:25:36 +00:00
frohlich
9148f9065a Modified Files:
groundcache.cxx: Reorder intersection tests a bit
2006-11-08 20:46:07 +00:00
frohlich
8627dd1669 Modified Files:
src/FDM/groundcache.cxx: Tim Moore: fix for groundcache problems.
2006-11-07 06:09:36 +00:00
frohlich
b0f9d24f9d Modified Files:
configure.ac src/AIModel/AIAircraft.cxx src/AIModel/AIBase.cxx
 	src/AIModel/AIBase.hxx src/AIModel/AICarrier.cxx
 	src/AIModel/AICarrier.hxx src/AIModel/AIManager.cxx
 	src/AIModel/AIManager.hxx src/ATC/AIEntity.cxx
 	src/ATC/AIEntity.hxx src/ATC/AIMgr.cxx src/ATC/AIMgr.hxx
 	src/ATC/ATCdisplay.cxx src/ATC/ATCdisplay.hxx
 	src/Cockpit/cockpit.cxx src/Cockpit/cockpit.hxx
 	src/Cockpit/hud.cxx src/Cockpit/hud.hxx
 	src/Cockpit/hud_rwy.cxx src/Cockpit/panel.cxx
 	src/Cockpit/panel.hxx src/Cockpit/built_in/FGMagRibbon.cxx
 	src/Cockpit/built_in/FGMagRibbon.hxx src/FDM/flight.cxx
 	src/FDM/groundcache.cxx src/FDM/groundcache.hxx
 	src/GUI/gui_funcs.cxx src/Input/input.cxx
 	src/Instrumentation/od_gauge.cxx
 	src/Instrumentation/od_gauge.hxx
 	src/Instrumentation/render_area_2d.cxx
 	src/Instrumentation/render_area_2d.hxx
 	src/Instrumentation/wxradar.cxx
 	src/Instrumentation/wxradar.hxx
 	src/Instrumentation/HUD/HUD.cxx
 	src/Instrumentation/HUD/HUD.hxx
 	src/Instrumentation/HUD/HUD_runway.cxx src/Main/Makefile.am
 	src/Main/main.cxx src/Main/renderer.cxx src/Main/renderer.hxx
 	src/Main/viewmgr.cxx src/Model/acmodel.cxx
 	src/Model/acmodel.hxx src/Model/model_panel.cxx
 	src/Model/model_panel.hxx src/Model/modelmgr.cxx
 	src/Model/modelmgr.hxx src/Model/panelnode.cxx
 	src/Model/panelnode.hxx src/Navaids/awynet.cxx
 	src/Scenery/Makefile.am src/Scenery/hitlist.cxx
 	src/Scenery/hitlist.hxx src/Scenery/newcache.cxx
 	src/Scenery/scenery.cxx src/Scenery/scenery.hxx
 	src/Scenery/tileentry.cxx src/Scenery/tileentry.hxx
 	src/Scenery/tilemgr.cxx src/Scripting/NasalSys.cxx
 	src/Scripting/NasalSys.hxx src/Time/light.cxx
	Big BLOB on the way to OSG.
2006-10-29 19:30:21 +00:00
mfranz
74faacdf16 Maik JUSTUS: last changes for better consistency with The FlightGear Way. 2006-10-29 12:44:15 +00:00
mfranz
cf86ca67f8 Maik JUSTUS: replace underscore with hyphen in config keywords, to be
consistent with the rest of YASim and almost all of fgfs
2006-10-28 21:14:32 +00:00
mfranz
edd8c25fae Maik JUSTUS: change /rotors/*/blade1_pos to /rotors/*/blade[0]/position-deg,
incidence to incidence-deg, and flap to flap-deg
2006-10-28 20:53:19 +00:00
mfranz
70bab80507 remove unused and empty files 2006-10-28 18:02:47 +00:00
curt
39869b582a Fix a typo so that turbulence can work in JSBSim models once again. 2006-10-19 02:39:05 +00:00
andy
7c445ccb73 Another fix from Maik 2006-09-14 21:05:34 +00:00
andy
77ecc04676 Helicopter update from Maik:
More realistic calculation of vortices at the blades and therefore
 real airfoil parameters can be used now (not to be mixed up with the
 vortex ring state which is still not simulated), ground effect is now
 continuous e. g. at buildings, calculating of the rotor in more than 4
 directions, better documentation of the airfoil parameters.
2006-09-14 18:18:33 +00:00
andy
2f2d486778 Curt noticed a while back that YASim was producing alpha and sideslip
values that were angles between the aircraft's orientation and the
global velocity vector, not the airflow velocity.  So the HUD velocity
vector was wrong when the wind was non-zero.  Fix that.
2006-08-28 17:24:34 +00:00
andy
0838ca6d35 Giant helicopter code update from Maik Justus. 2006-08-14 21:59:44 +00:00
andy
e26481cf0a Fix a few warnings while I'm in there. Melchior poitned out that my default
configure-generated Makefiles don't include -Wall and a few issues had crept
into the code.
2006-08-08 18:23:20 +00:00
andy
90e7c4ec43 Add a lift/drag vs. AoA graph option to the yasim tool, which
generates a data file of aerodynamic lift and drag (and L/D) against
AoA at a specified speed and altitude through a full circle.  Wrote it
to track down the YF-23 superthrust issue, but it wasn't any help.
All the forces look fine.
2006-08-08 18:05:43 +00:00
andy
95da644df9 Melchior sent me a property dump of the YF-23 in the wacky superthrust
state.  The only really obvious problem was a giant negative engine
RPM, which happened because of a lack of clamping in the engine code
combined with the YF-23's ability to actually reach speeds near the
engines _vMax value.  It's not clear to me that this will fix the
superthrust issue at high AoA's, but it's an obvious bug nonetheless.
2006-08-08 14:19:15 +00:00
andy
16b11e311c Fixes from Maik Justus:
+ The wing compilation step was accidentally omitting regions that lie
  between the tips and the first/last control object.  That's a real
  problem for wings that contain no controls, and a significant issue
  for those that contain only a few.  I'm stunned that this went
  undetected for so long.
+ The Surface::flapLift() function was oddly returning 1.0 Newtons as
  a minimum, instead of zero.
2006-08-07 16:49:26 +00:00
frohlich
6afe252440 Use bool where the source and destination variable is bool. 2006-08-01 05:56:49 +00:00
frohlich
cdb725528d Clean up scenery center handling. It is set now less often. 2006-07-27 16:36:22 +00:00
curt
f31088070c Fix a class of problem that could lead to needless extra time "jitter" in the flight dynamics
calculations.  We run the FDM at 120hz and compute how many loops can fit into each FG loop.
Floating point rounding could lead to a situation where we could end up running
1, 3, 1, 3, 1, 3... loops of the FDM when in fact we want to run 2, 2, 2, 2, 2...

If we artificially inflate ml above by a tiny amount to get the
closest integer, then subtract the integer from the original
slightly smaller value, we can get a negative remainder.
Logically this should never happen, and we definitely don't want
to carry a negative remainder over to the next iteration, so
never let the remainder go below zero.
2006-07-26 14:18:06 +00:00
mfranz
92272b5740 set altitude AGL 2006-07-06 14:24:14 +00:00
andy
a6661b43e0 Patch from Mathias: unify the AGL altitude with the other FDMs, but preserve the distance-to-touchdown metric in the gear-agl properties. 2006-06-26 17:59:58 +00:00
frohlich
c2d8dcc18b More use of SGGeo[dc]. 2006-06-15 08:29:43 +00:00
frohlich
14fe03ba6f Modified Files:
src/AIModel/AIAircraft.cxx src/ATC/AILocalTraffic.cxx
	src/FDM/flight.cxx src/FDM/flight.hxx src/FDM/groundcache.cxx
	src/FDM/groundcache.hxx src/Main/fg_init.cxx src/Main/main.cxx
	src/Scenery/hitlist.cxx src/Scenery/hitlist.hxx
	src/Scenery/scenery.cxx src/Scenery/scenery.hxx
	Make use of the attached SGMaterial reference userdata on scenegraph
	leafs. Make the SGMaterial pointer available to the ground query
	routines.
2006-06-11 13:34:18 +00:00
mfranz
e48967cb1d fix another crash on exit by finally converting the rest of unguarded
SGPropertyNode to guarded ones. This is also done for JSBSim/JSBSim.hxx,
for which JSB had given explicit permission a while ago. I postponed that
back then, but now is the time.
2006-06-11 10:21:10 +00:00
mfranz
d41e86e0c6 make headers include headers they depend on, don't rely on the c(xx)
file to do that. (This is a requirement for header precompiling.)
2006-04-17 13:19:53 +00:00
fredb
63eec99347 Pigeon : save about 110Mb when the UIUC FDM is not used 2006-04-09 09:22:15 +00:00
ehofman
746fe74838 Jon Berndt:
I had inadvertently terminated a data line when reaching a tab character after
initial data was supplied. I tested the lightning file and it now appears to
read in correctly.
2006-03-22 13:32:32 +00:00
ehofman
01d85464be Fix 3d tables. 2006-03-20 20:19:16 +00:00
curt
abe6fe4787 Small gcc-4.1 patch. 2006-03-18 13:10:59 +00:00
andy
14bad84d6d Missing initializer. Kraehe's machine was crashing on the Cub;
presumably this is why.
2006-03-13 18:57:10 +00:00
ehofman
28eb9c81e9 Sync. w. JSBSim CVS. 2006-03-13 15:21:57 +00:00
mfranz
9aaac1e352 don't allow others to delete our property node 2006-03-11 12:19:43 +00:00
mfranz
330154263e make max speed configurable (/engines/engine/speed-max-mps);
default: 2000 meter/second
2006-03-11 09:23:51 +00:00
andy
6ed0ece57c While I had the valgrind rig set up, I took the opportunity to plug a
bunch of memory leaks that had accumulated over the years.  FlightGear
doesn't currently bother to destroy and recreate a YASim context, but
at least it can do so now without worry.
2006-03-10 22:21:42 +00:00
andy
d47eefb00c Fix an uninitialized data condition that crept in during the recent
groundcache addition -- the ground callback doesn't do anything at
solution time, so the ground plane was unset.  Valgrind was whining
about this; it's not clear that it was actually causing a problem.
2006-03-10 19:47:23 +00:00
andy
91c024ebec When we are asked to produce no force on a Surface (e.g. a weight that
is "off"), make sure the force is actually zero.  Kind of a hack -- a
better idea would be flag to set at a higher level.
2006-03-10 19:46:16 +00:00
fredb
1051288b9d Remove a useless and harmful statement : MSVC complains std is not a valid namespace because no STL header is included 2006-03-02 22:52:05 +00:00
andy
170ed002e2 From Vivian: change default up/down angles on the Launchbar from 30 to
45 degrees and add a "holdback-length" attribute.
2006-03-02 16:49:25 +00:00
andy
e4fe99ce12 Fixes a bugs in the handling of the holdback mount point (by Mathias),
and in the calculation of the launchbar angle (by Vivian).

It also calculates the holdback angle, and sets a Boolean value which
can be used to initiate the release of the catapult strop submodel at
the appropriate moment (new code by Vivian).
2006-03-01 22:59:58 +00:00
mfranz
47f6b67365 work better with interpolated brakes 2006-03-01 21:04:52 +00:00
andy
bdec9f1bba Uninitialized member variable. Default to "turbocharged", not "supercharged" 2006-03-01 17:45:26 +00:00
andy
45e76b357e Forgot to hook up the WASTEGATE control. Also, fix a cut-n-paste
constant that got incorrectly copied from Jet.cpp, and some cosmetics.
2006-03-01 17:38:54 +00:00
andy
ef8bac3b2f Oops, forgot the hooks to the configuration. 2006-02-28 19:27:33 +00:00
andy
97b75a79bf Inspired by a patch from Vivian, this adds a settable "WASTEGATE"
control to piston engines that allows external scripts to control the
turbo/supercharger boost programatically by setting this axis to
values in the range [0:1].  It also adds a "turbo-lag" attribute (a
time in seconds) to engines implementing turbocharger spooling delays.

This isn't terribly well tested, but doesn't seem to have broken
anything.
2006-02-27 23:35:02 +00:00
ehofman
9b33107551 Syn.c w. JSBSim. 2006-02-27 08:41:24 +00:00
david
86c3a3b5c4 Allow YASim flight models to override the hard-coded fine and coarse
propeller pitch stops for constant speed propellers.  The default
values are the same as the previous hard-coded values.  The new
attributes, "fine-stop" and "coarse-stop", are documented in the base
package, Docs/README.yasim.
2006-02-26 16:46:51 +00:00
daveluff
00ba5a853e Recent SimGear changes seem to require more additions of config.h to FG in order to compile on Cygwin 2006-02-22 21:04:47 +00:00
mfranz
f38f3aabcc new FSF address (see http://www.gnu.org/licenses/gpl.html) 2006-02-21 17:45:03 +00:00
mfranz
146298ad89 set new FSF address (the whole paragraph is taken from
http://www.gnu.org/licenses/gpl.html, so it drops the link)
2006-02-21 17:37:31 +00:00
mfranz
c9813d1b5d new FSF address 2006-02-21 01:16:04 +00:00
ehofman
5fe860750e Mathias Fröhlich:
This patch makes use of the vectors now available in simgear with that past
patch. And using that it simplyfies the carrier code somehow.

- Small additional factory's to the quaternion code are done in the simgear
  part. Also more explicit unit names in the factory functions.
- The flightgear part makes use of them and simplyfies some computations
  especially in the carrier code.
- The data part fixes the coordinate frames I used for the park positions in
  the carrier to match the usual ones. I believed that I had done so, but it
  was definitly different. Also there are more parking positions avaliable now.
2006-02-19 17:28:31 +00:00
fredb
3d66aa6175 Fix line endings 2006-02-18 17:06:08 +00:00
fredb
72d3e86b76 Add missing include files needed by the new math code under windows 2006-02-18 14:05:47 +00:00
fredb
36e4045810 Add missing include files needed by the new math code under windows 2006-02-18 13:58:09 +00:00
fredb
ef62644c96 MSVC fix 2006-02-17 21:53:22 +00:00
ehofman
ae77c7d75a Sync. w. JSBSim CVS. 2006-02-08 09:15:57 +00:00
ehofman
6849328fea Sync. w. JSBSim CVS 2006-02-02 09:35:25 +00:00
ehofman
ca462fa546 Mathias Fröhlich:
Jon Stockill wrote:
> I've just discovered that when using the null fdm I'm not getting
> updates to /position/ground-elev-m any more. So I can't actually
> retrieve the terrain elevation. Is there somewhere else in the property
> tree I could read this from?

The attached patch fixes this problem.
2006-01-30 10:54:10 +00:00
ehofman
ea177f6744 Olaf Flebbe: MSVC fix. 2006-01-21 10:11:08 +00:00
ehofman
31e3caa4f6 Sync. w. JSBSim 2006-01-20 17:50:45 +00:00
ehofman
619226e9d0 Integrate a large part of John Wojnaroski's 747 cockpit project.
Erik Hofman:
This patch contains an update to net_ctrls.hxx that adds an extra 100 bytes
(or an equivalent of 25 (u)int32_t types) of reserved space. This could be
used to make the protocol forward and backward compatibel within a certain
scope. Be sure to read the instructions at the begining of the header file
when addinf new variables.
2006-01-20 17:19:01 +00:00
fredb
17d20cf606 Remove the filtersjb left over 2006-01-13 14:00:13 +00:00
ehofman
f73f2f7254 Hide some user generated files. 2006-01-13 09:50:58 +00:00
ehofman
587fd0937e Remove a bunch of unneede files. 2006-01-13 09:49:09 +00:00
fredb
d0618685a2 Typo 2006-01-12 21:35:59 +00:00
fredb
bcc8339c4f Variable 'thrust' used before being initialized 2006-01-12 21:35:32 +00:00
fredb
4303c2b9a6 Redundant loop variable declaration 2006-01-12 21:35:08 +00:00
fredb
5d5a58de80 Don't declare functions that are not implemented 2006-01-12 21:34:36 +00:00
ehofman
932b38a87e sync. with JSBSim v. 2.0 2006-01-12 15:04:22 +00:00
ehofman
2080773f37 Cygwin fixes. 2006-01-04 12:49:07 +00:00
ehofman
2d4ffc0dce Vassilii Khachaturov:
clean up some build warnings caught with gcc-4.0.
2005-12-19 12:53:21 +00:00
ehofman
4c395bf7a6 MSVC8 fixes. 2005-12-11 12:53:54 +00:00