This is for the FGProperties::getLongitudeString() and
FGProperties::getLatitudeString() functions. The previous algorithm was to
round the degrees up by the smallest fraction required to prevent a round up to
60 minutes or seconds, and then round down the final minutes or seconds by the
same fraction. The new algorithm is to detect if the final minute or seconds
will be rounded to 60 by the string formatting and, if so, the higher unit
(degrees or minutes) is incremented by one, and the lower unit decremented by
60.
Drop fgNormalizePath, use realpath() only
As this makes it accept relative paths, always use the returned
(absolute) version for the actual file operation to avoid check-to-use
races, or where this is not possible (NasalSGPath) explicitly reject
relative paths
Fix: do_save is a write, not a read
* Before setting /sim/aircraft-dir from the --aircraft-dir option,
canonicalize its value with SGPath::realpath() as is already done in
FGGlobals::append_aircraft_path() for the paths given with --fg-aircraft
or via the FG_AIRCRAFT environment variable.
* This fixes a bug when --aircraft-dir is used, due to the fact that
fgValidatePath() canonicalizes its 'path' argument before matching it
against the allowed patterns, and therefore will not validate paths
under the directory specified with --aircraft-dir if this directory has
been given in a non-canonical form by the user (e.g., containing at
least one symlink component).
* This fix does not lower security: the path which is canonicalized has
been explicitely given by the user. This operation is already done for
all paths specified with --fg-aircraft or via the FG_AIRCRAFT
environment variable, via Options::initPaths() which calls
FGGlobals::append_aircraft_paths().
* To reproduce the bug, create a symlink (e.g., /tmp/aircrafts) to a
directory suitable for --fg-aircraft, then run:
fgfs ... --fg-aircraft=/tmp/aircrafts \
--aircraft-dir=/tmp/aircrafts/SenecaII --aircraft=SenecaII
This will trigger many failures such as:
loadxml: reading '/tmp/aircrafts/SenecaII/Dialogs/registration.xml'
denied (unauthorized directory - authorization no longer follows
symlinks; to authorize reading additional directories, add them to
--fg-aircraft)
(from do_load_xml_to_proptree() in flightgear/src/Main/fg_commands.cxx)
I have also tested this with the ec130b4 and the 777-200ER. Same
problem, same fix.
* If one has the same aircraft in several aircraft directories,
FlightGear should not mix resources from the various aircraft
directories. For instance, if one starts FG with:
--fg-aircraft=/my/personal/dir:/path/to/fgaddon/Aircraft
and one has in /my/personal/dir/ec130 a clone of the upstream
developer repo, FlightGear should use either the upstream version from
/my/personal/dir/ec130 or the FGAddon version from
/path/to/fgaddon/Aircraft/ec130, but not some strange, untested hybrid
of both.
* This commit makes sure that when the looked-up resource starts with
Aircraft/<ac>, where <ac> is the current aircraft name [last component
of aircraftDir = fgGetString("/sim/aircraft-dir")], then
AircraftResourceProvider::resolve() doesn't search other aircraft
directories if the resource isn't found under 'aircraftDir'.
* To reproduce the bug before this commit, you may add the following
code (there is nothing specific about the SenecaII here, it's just the
aircraft I used for testing):
var file_path = resolvepath("Aircraft/SenecaII/flo-test");
if (file_path != "")
gui.popupTip("flo-test found", 2);
else
gui.popupTip("flo-test not found", 2);
in a keyboard binding for the SenecaII (for instance; you may use the
F11 binding that otherwise only prints a short message). You should
add this to the SenecaII/SenecaII-base.xml file *that will be loaded
by FlightGear*, let's say the one under /my/personal/dir in the
example above (beware of the <path-cache> in autosave_X_Y.xml). Then,
by creating or removing a file named "flo-test" in the SenecaII
subdirectory of other aircraft dirs (for instance,
/path/to/fgaddon/Aircraft in the example above), you can see that the
behavior of the loaded aircraft is influenced by the contents of
unrelated versions of the same aircraft that might be present in other
aircraft dirs (e.g., loaded /my/personal/dir/SenecaII influenced by
/path/to/fgaddon/Aircraft/SenecaII).
* Aircrafts loading resources using paths relative to the current
aircraft directory (e.g., with 'resolvepath("flo-test")') are not
affected by this kind of problem, because this scheme is handled by
CurrentAircraftDirProvider, which does not exhibit this bug.
negative latitude/longitude coordinates resulted in negative WEST/
SOUTH coordinates for the default format 0 (zero).
This should be now fixed so that
+12.3 gets formatted as 12.3N/E
-12.3 gets formatted as 12.3S/W
https://bugs.debian.org/780867
This messy approach is to minimise changes during freeze; for 3.7,
I plan to make realpath() handle non-existent files as "realpath
they would have if created now" and get rid of fgNormalizePath
This is insecure because it always (not just on Windows) converts
\ to / before .. checking. Either use the path it returns (as in
f_open()) or use an SGPath (where this conversion is already done)
Only a minor problem because the affected functions are limited to
the .sav file type
While mostly harmless since you're exiting anyway, it's an annoying
distraction when the real problem is "unexpected exit" (e.g.
https://bugs.debian.org/763285 ), and blocks testing with LeakSanitizer
The old Mac launcher doesn’t work on Yosemite, add a tiny
Qt-based launcher inside the main process (no need to fork /
exec) which runs before the OSG window is created.
Will be merged for 3.4, hopefully with no impact on other
platforms.
Unfortunately we can’t drop loaded ones, since the in-memory structures don’t have ref-counting, and we don’t
know what AI plans may be referencing them.
Adds new option --load-tape=foobar to load a flight recorder
tape from the command line. Loads foobar.fgtape from the
directory specified in /sim/replay/tape-directory and starts
replay.
- /sim/aircraft can be set to package ID, including qualified
package ID. If not matching package is found, falls back to
traditional search of fg-aircraft for -set.xml files
By default, if the system version exists and can be used,
then it will be used. Otherwise, the local version will be used
Original patch by Saikrishna Arcot via
https://gitorious.org/fg/flightgear/merge_requests/1582
slightly modified
Fixes confusing startup behaviour with malformed args, when
an argument accidentally contains a space (e.g. a park-pos or
protocol desc). In this case we treat the parts after the space as an XML config file name. When we can't find this file, we
completely abandon options setup, which causes many downstream
errors.
Change the behaviour so we warn in this case, but carry on with normal startup.
This is too destructive for many established things, so revert it.
Instead, make the FDM shell save /fdm state on postinit(), and
restore it on re-init (which reposition invokes).
- Not compiled by default, nor hooked up to anything yet.
- Both libraries licensed under modified BSD license.
- Added top-level CMake file for both, to create a plain static
library for each.
- use old-style reset as the basis for a lightweight 'reposition' command. This does not restore state, or reset
time management, but does reset the FDM and re-finalize position.
* make --enable-fpe work on Linux and MSVC
* standardise the code paths for different platforms
* add an argument finding helper to Options
(This is a basic cleanup, contributions from people with
more experience in this area are welcome)
- no dependency on libJpeg or Simgear
- no duplicate rendering of the scene (uses a draw callback)
- supports other image types, eg PNG
- threaded so doesn't block the main loop ever
This makes the behaviour when FGRun (or other GUI launchers)
send bad options much more explicable. Non Windows/Mac systems
get an SG_ALERT on the console as before.
Adapt to corresponding SG change to make SGMaterialLib be ref-counted,
and have the 'reload-materials' command notify the tile-manager of this,
so it can update the options struct it passes to new tiles.
Warn (but do not require, since people would probably complain) when
added paths do not contain an Aircraft subdir. When people specify
a path which ends in /Aircraft, use the parent directory.
- borrow some code from the new reset codepath to cleanly stop the
OSG pager thread during normal shutdown. Avoids a race-condition
destroying various structures the pager thread might be modifying.
This was previously done only if Terrasync was on, but this made
it impossible to use the GUI dialog to turn it on for the first
time in a fresh install
Had to add this to FGGlobals, since it needs to be cleaned up
alongside the sound manager (which ideally it would be owned by,
but that's a change for another day)
Write PID file to FG_HOME, use this to detect multiple launches.
When this situation is detected, set a marker property and place various
objects into read-only mode, such as the NavCache and TerraSync.
PID file is created using open+unlink semantics on POSIX, and
DELETE_ON_CLOSE on Windows, so it will be removed when fgfs exits,
even if killed or crashes.
This allows us to display a platform-native dialog for problems
which occur early in startup (before we can show a PUI/Canvas dialog).
In particular this improves feedback where FG_HOME, FG_DATA or
aircraft selection is wrong, all of which happen very early in startup.
Requesting 16-bit is probably doing more harm than good on modern
hardware. Command line switch to change works as before.
Also update the default window size, although this is actually
set by preferences.xml
- default to SUBSYSTEM:WINDOWS (we can still AllocConsole if needed)
- add --console option to get a console on Windows
- ensure --show-aircraft and --help modes show the console automatically.
- restore-defaults kills the nav cache, terra-sync cache
- new ignore-autosave option bypasses autosave.xml and leaves it
untouched (does not over-write on exit)
Replace many lingering calls to exit() from the code,
replacing most with exception throws, which can be
caught by the existing mechanisms.
Update the option-parsing code to return an explicit
value indicating what to do (e.g., exit status to return
to the shell).
Many light aircraft include GPS loggers capable of recording the flight
path using IGC records. Lots of third party utilities are available to
analyze, process and convert igc files.
Usage: "fgfs --igc=file,out,1,OutputFile.igc"
- Enable the terrasync persistent cache
- Ensure terraysync scenery dirs exist before NavCache init, so the paths are stable
- Notify TerraSync on reposition, so we sync the full 3x3 set of tiles.
Move sqlite source to a separate location, and build with
an intermediate library target. This permits us to set compile options
easier, including an important one, NDEBUG, which improves performance.
Sqlite 3.8.0.2 also includes an updated query planner which may improve
some queries, to be tested.
If you want a scenario in a particular session of the sim, ask for
it on the command line / config files, or enable in the GUI.
Note if you had previously 'sticky' scenarios in your autosave.xml, you
will still get them until you clean your autosave, or disable them in
the GUI.
Respect the user's language selection in the system settings, and try those languages in turn. If a language is explicitly specified, try that first regardless.
Allow for advanced animations using easing functions and adapters
for interpolating specific property types (eg. CSS colors).
Old behavior should not have changed.
This adds the framework for platform cursor implementations; Windows and X11 to be done.
It also extend the mouse-input code to generate hover events suitable for driving tooltips.
Note there should be no visible functionality change from this commit, since everything
is inactive until fgdata changes are made.
Enabling this hack by default, to assess the impact for everyone. Should fix the issue for Ati Catalyst 11.5 users, and hopefully no impact for everyone else. All feedback appreciated. Set /sim/ati-viewport-hack to false if you think this option might be causing issues for you (and then tell James, ASAP)
Make position finalisation happen in the same phase as scenery load, i.e as a task during the main loop, instead of during the init loop. This is compatible with the existing reset logic. Unfortunately more work is needed; the environment code doesn't update the local station quickly enough on reset. (Fixing that is next!)
Record the historical flight-path (by default, since last takeoff). Optionally display the flight-path in the map; other visualisations (e.g., an 'in-world' view) could also be created. Nasal API to follow so Canvas-map or FMS can show the same data.
Altitude and attitude (Euler angles) are currently recorded but not used anywhere.
Modify startup sequence, so position can be modified late in the startup process, right before the scenery load starts. This allows two ugly hacks to move to a permanent, less hacky location. If other position init modes required similar late evaluation in the future, this can be accommodated now.
This is a somewhat high-risk change - I've tested both carrier starts and runway-selection based on realwx METAR, but please look out for other position-init issues and test before / after this patch.
"speed-up" can now also be used for slow-motion (i.e. 0.5 / 0.25 / ...)
or fractional speeds (3.141...). This was already working for instruments
(for replay) before, now it's also considered by FDM simulation.
Allow XML property data to be submitted with a request; changes the request method from GET to POST. Supply nodes via the 'body' argument to the command.
Add missing ATIS elements (transition level, expected approach,
precipitation, runway surface warnings).
Minor phraseology fixes for US/Europe.
Adds "/sim/atis/concise-report" option to use abbreviations (CAVOK etc),
and omit "obvious" units (depends on airport).
Trigger ATIS updates for significant pressure changes.
Make subsystems create-able and removable from commands. Only some subsystems are supported so far, since many have non-default constructors or other complexities.
With this, change, it's possible to dynamically add and remove the traffic-manager at runtime, for example: fgcommand("add-subsystem", props.Node.new({ "subsystem": "traffic-manager", "name":"traffic-manager", "do-bind-init":1}));
For (future) easier testing of the sim, support a mode where only explicitly named config / option files are loaded, instead of the default ones. (Including, for example, preferences.xml). This currently produces a non-functional sim, but will soon be more useful :)
No behaviour should change unless you try the new option.
Avoid the application becoming unresponsive during nav-cache rebuilds. We still have to wait for the rebuild, but perform it on a helper thread so the main GUI thread stays responsive and hence doesn't trigger a beach-ball / 'not responding' alert. Also ensures there's some feedback (the spinner) during the rebuild operation, so users don't think we've hung.
In preparation for caching the groundnet in the NavCache, make taxi-nodes and parkings inherit from FGPositioned. As part of this, make them heap (as opposed to value) classes, disable their copy-constructors, remove many mutating operations, and give them real constructors.
so they can instantly adjust to the changed environment.
(Not fully working yet, since some environment settings, like environemnt
pressure/temperature, still changes slowly after a sim reset - instead of
immediately jumping to the new setting. Also, METAR sometimes arrives too
late...).
Break some subsystem dependencies, by explicitly using properties to read the primary position, orientation and velocities. (Instead of directly accessing the primary model placement). This means a couple more globals can die.
Keep distro packagers happy by having the option to use the system's sqlite library instead of our bundled version. Set SYSTEM_SQLITE=1 when running cmake to use the system one.
Cache the parsed navigation and airport data in a binary file to reduce
startup times and memory consumption (since only referenced FGPositioned
elements are held in memory).
Data will be reimported when the mod-time of any input file is changed.
If a global file is changed (nav.dat, awy.dat, apt.dat, etc), the cache
will be completely rebuilt, which takes approximately 30 seconds on
moderate hardware. (Future work may reduce this).
Separate other init functions from position init, since they are unrelated, and made fg_init.cxx very complex. Next step will be brining some sanity to the position init logic :)
(Requires latest SimGear!)
Break fgInitSubsystems into several phases - subsystem creation, then binding and then init. Run init over multiple main-loop iterations so the application stays responsive to GUI/OS events during init.
There should be no behaviour changes due to this, except that during init Windows and OS-X should no longer show the beach ball / 'application not responding feedback', hopefully.
