subsystem to Flightgear. No more functionality is implemented
than at present (apart from an ATIS bug-fix - station wouldn't
change if the radio was switched directly from one station to
another) but it is much neater than the current hack and should be
easily extendable.
Some cruft is still probably left over in radiostack.[ch]xx such as
the bindings to the comm frequencies but I'll leave removing those
until I'm sure they're not needed there.
Added two new properties:
/environment/temperature-sea-level-degc
/environment/pressure-sea-level-inhg
These are now supported in FGEnvironment as well, though they always
have the same value for now. They need to be hooked up to the FDMs.
different locations, and hitched it into FGGlobals. FGEnvironmentMgr
has taken over as the subsystem, while FGEnvironment is simple the
information that it returns. I've removed current_environment
completely -- everything now uses properties or goes through
FGGlobals. FGGlobals itself has a couple of useful methods:
const FGEnvironment * get_environment ();
const FGEnvironment * get_environment (double lat, double lon, double alt);
The first one returns the environment data for the plane's current
position, while the second returns the environment data for any
arbitrary location. Currently, they both return the same information,
but that will change soon.
properties have been renamed from wind-(north|east|down)-fps to
wind-from-(north|east|down)-fps, and the FDMs modified appropriately.
No other changes should be visible unless FG_OLD_WEATHER is defined.
are being driven from an external data source.)
Akso found and fixed a bug in the simgear that caused the time to go goofy
temporarily while scenery was being loaded.
/sim/freeze/master (implimented)
/sim/freeze/fuel (implimented)
/sim/freeze/position (not implimented)
/sim/freeze/time-of-day (not implimented)
/sim/freeze/master is bound to the 'p' key via keyboard.xml, however,
/sim/freeze/fuel is not bound to anything at the moment so you must
change it via the external property interface, or specify an initial
value on the command line.
function to allow property files as non-option parameters after the
options have finished (and added "--" to terminate options). It's now
possible to do something like
fgfs denver-am.fgd
or even
fgfs at-lax.fgd in-c310.fgd around-sunset.fgd
This works the same way as the --config option, but will be friendlier
for GUIs, where start-up situation files can now be associated easily
with FlightGear.
material-specific logic is now removed from the material library and
encapsulated in the material class itself, and materials are loaded
from $FG_ROOT/materials.xml rather than $FG_ROOT/materials. This also
removes a nasty bug in the old material-loading code that caused a
floating-point exception.
works like this:
1. Parse preferences.xml, which will usually specify a default
aircraft using the /sim/aircraft property.
2. If /sim/aircraft is specified and not empty, parse the properties
in $FG_ROOT/Aircraft/{/sim/aircraft}-set.xml to set up a default
aircraft.
3. During command-line parsing, whenever the --aircraft option appears
set /sim/aircraft appropriately and parse the properties in
$FG_ROOT/Aircraft/{/sim/aircraft}-set.xml. Any --config, --prop, or
--aircraft options afterwards will take precedence.
more intuitive. We switch to an include in the preferences.xml to include
the default model, and then if the user specifies --aircraft=, that is
expanded immediately so portions can be overwritten by subsequent command
line options.
a top level aircraft def file (c172-set.xml)
preferences.xml or --aircraft= or any other property setting mechanism can
be used to set the property "/sim/aircraft". After all options and config
files are parsed, the contents of /sim/aircraft is expanded into a *-set.xml
file and loaded.
fix startup sequence problems where we initialize the FDM before we know
the desired starting altitude.
These changes delay fdm initialization until the local tile has been loaded
and we can do a real intersection and find the true ground elevation.
In order to do this, I depend more on the property manager as glue, rather
than the FGInterface.
There are some glitches still when switching to a new airport or reseting
the sim. I will work on addressing these, but I need to commit the changes
so far to keep in sync with other developers.
meaning of "win_ratio". I've removed win_ratio and added fov_ratio and
aspect_ratio, as it seems both are needed.
n.b. The multi-line changes in fgReshape comprise:
extracting common code,
removing an apparently arbitrary "+1" on the view height,
changing "set_win_ratio" to "set_aspect_ratio".
I've updated the WeatherDatabase to be able to use only the n closest
stations. This can speed up the initalization dramatically.
To take a benefit from that you need:
- http://129.13.102.67/out/flight/current.txt.gz in
FG_ROOT/weather/current.txt.gz
- --prop:/environment/weather/working-type=internet
- --prop:/environment/weather/max-stations=what_ever_you_want
The WeatherCM stuff now publishes its data in the property system.
/environment/weather/wind-north-mps
/environment/weather/wind-east-mps
/environment/weather/wind-up-mps
/environment/weather/temperature-K
/environment/weather/air-pressure-Pa
/environment/weather/vapor-pressure-Pa
/environment/weather/air-density
are the new properties.
(src/Input). So far, FGInput replaces most of src/Main/keyboard.cxx
(I've left a tiny stub); in the very near future, it will also take
over control of the joystick, mouse (Norm permitting), and panel
instrument interactions, so that there is a single mechanism for
configuring all input devices.
The new format should be (close to) self-explanatory by looking at the
new base-package file keyboard.xml, which is now included by
preferences.xml (I'll do the same thing for the joystick when I have a
chance). I have not managed to move all keybindings into this file
yet, but I've made a good start. I'm including Tony in the recipient
list so that he can see how bindings can use an external XML file.
This patch also adds support for multiple bindings for a single key,
special keys (i.e. keypad and function keys), and key modifiers
(shift/alt/ctrl); special keys use the PUI convention of adding 256 to
the Glut key code.
Unfortunately, everything comes with a price; in this case, I have not
yet found a general mechanism for the old (hard-coded) modal bindings,
which behaved differently depending on the autopilot state (i.e. left
rudder or move AP heading left); with my patches, this functionality
disappears, but you can still adjust the autopilot using the panel or
the GUI input dialogs.
The files in the attached tarball make the following changes to
FlightGear:
- rename the existing FGInterface::init() method to
FGInterface::_setup to get it out of the way
- move *all* FDM initialization code out of src/Main/fg_init.cxx and
into FGInterface::init(), and clean up fg_init.cxx a little
(especially by removing the zillions of attempts to place the plane on
the ground at various locations in the code)
- modify FGInterface::bind() so that no values are picked up
automatically at bind time (they are set previously by init() instead)
- modify the init() methods of the classes derived from FGInterface
(i.e. larcsim, jsbsim, balloon, magic, and ada) to invoke
FGInterface::init() explicitly before doing their own setup
I don't claim that the code in FGInterface::init() is optimal (or even
correct), but it seems to work for on-ground starts with both LaRCSim
and JSBSim on runways pointing various directions from near sea level
to about 700' ASL (the range I happened to test). I expect that Jon
and Tony will want to look at the code and refactor and correct it now
that they can see what's going on in one place.
Here's a quick outline of what is invoked:
cur_fdm_state = new <whatever>(dt);
cur_fdm_state->init();
cur_fdm_state->bind();
The constructor allocates memory and sets default values only (with
the help of the FGInterface::_setup() method). The init() method pull
any required properties out of the property tree and sets up the
initial state of the FDM. The bind() method takes ownership of
FDM-related properties so that the FDM can publish them to the rest of
the sim.
Note that bind() and init() are virtual, so any implementation in a
subclass will hide the implementation in FGInterface; that's why
subclass implementations of init() and bind() have to invoke
FGInterface::init() and FGInterface::bind() explicitly, probably at
the start, so that they get the basic initialization.
is 9 not 8.) Note that the initial altitude setting was placing us way below
the ground, but as it doesn't seem to have caused us problems, it's probably
redundant!
restoreInitialState methods to FGGlobals, as well as the two-stage
commit described above for loading saved files. fgInit now takes a
snapshot of the initial state before handing off to the main loop, and
the GUI reInit function restores that state explicitly before calling
fgReInit.
The FlightGear patches also modify fg_props.hxx to add optional
useDefault arguments to all of the fgTie functions -- that lets you
choose whether you want to pick up any default value in the property
tree when you tie the property (the default is true).
FGOptions is history, and the modules are (starting) to use the property
manager directly. Let me know if I left any files out.
Inevitably, there will be some problems with broken options, etc.,
that I haven't found in my tests, but I'll try to fix them quickly.
We also need to stress that the property names currently in use are
not stable -- we need to reorganize them a bit for clarity.
FlightGear subsystems -- it isolates some of the config and #ifdef
stuff in a single place.
2. Added a new FGSubsystem interface, defined in fgfs.hxx; so far,
only FGControls implements it, but if that works, we can start letting
it propagate through the system and simplify the code in main.cxx and
fg_init.cxx (which is terrifyingly complex for anyone new to the
project).
3. Added new src/Main/fgfs_props.[hc]xx files with convenience
functions for tying properties under FlightGear.
4. Experimentally modified src/Controls/controls.cxx to tie properties
directly (rather than tying to BFI functions). I'd appreciate it if
you could get this into CVS as soon as possible, so we can see if the
template stuff causes trouble for any other platforms before I add
properties to the other subsystems.
5. Miscellaneous superficial modifications to other files.
In addition, I've made a couple of further changes:
6. Modified BFI to add support for setting the view axes (i.e. with a
joystick hat).
7. Cleaned up bfi.cxx and removed all cout statements.
derive specific viewer classes from it. Here's what I currently have in mind:
FGViewer
|
|-> FGViewerPRH (current system with orientation specified in
| LaRCsim Euler angle convention)
|
|-> FGViewerLookAt Feed in a position, view direction, and up vector
|
|-> FGViewerHPR (similar to PRH, but using ssg hpr euler angle
| convention)
|-> others?
LaRCsim c172 on-ground and in-air starts, reset: all work
UIUC Cessna172 on-ground and in-air starts work as expected, reset
results in an aircraft that is upside down but does not crash FG. I
don't know what it was like before, so it may well be no change.
JSBSim c172 and X15 in-air starts work fine, resets now work (and are
trimmed), on-ground starts do not -- the c172 ends up on its back. I
suspect this is no worse than before.
I did not test:
Balloon (the weather code returns nan's for the atmosphere data --this
is in the weather module and apparently is a linux only bug)
ADA (don't know how)
MagicCarpet (needs work yet)
External (don't know how)
known to be broken:
LaRCsim c172 on-ground starts with a negative terrain altitude (this
happens at KPAO when the scenery is not present). The FDM inits to
about 50 feet AGL and the model falls to the ground. It does stay
upright, however, and seems to be fine once it settles out, FWIW.
To do:
--implement set_Model on the bus
--bring Christian's weather data into JSBSim
-- add default method to bus for updating things like the sin and cos of
latitude (for Balloon, MagicCarpet)
-- lots of cleanup
The files:
src/FDM/flight.cxx
src/FDM/flight.hxx
-- all data members now declared protected instead of private.
-- eliminated all but a small set of 'setters', no change to getters.
-- that small set is declared virtual, the default implementation
provided preserves the old behavior
-- all of the vector data members are now initialized.
-- added busdump() method -- FG_LOG's all the bus data when called,
useful for diagnostics.
src/FDM/ADA.cxx
-- bus data members now directly assigned to
src/FDM/Balloon.cxx
-- bus data members now directly assigned to
-- changed V_equiv_kts to V_calibrated_kts
src/FDM/JSBSim.cxx
src/FDM/JSBSim.hxx
-- bus data members now directly assigned to
-- implemented the FGInterface virtual setters with JSBSim specific
logic
-- changed the static FDMExec to a dynamic fdmex (needed so that the
JSBSim object can be deleted when a model change is called for)
-- implemented constructor and destructor, moved some of the logic
formerly in init() to constructor
-- added logic to bring up FGEngInterface objects and set the RPM and
throttle values.
src/FDM/LaRCsim.cxx
src/FDM/LaRCsim.hxx
-- bus data members now directly assigned to
-- implemented the FGInterface virtual setters with LaRCsim specific
logic, uses LaRCsimIC
-- implemented constructor and destructor, moved some of the logic
formerly in init() to constructor
-- moved default inertias to here from fg_init.cxx
-- eliminated the climb rate calculation. The equivalent, climb_rate =
-1*vdown, is now in copy_from_LaRCsim().
src/FDM/LaRCsimIC.cxx
src/FDM/LaRCsimIC.hxx
-- similar to FGInitialCondition, this class has all the logic needed to
turn data like Vc and Mach into the more fundamental quantities LaRCsim
needs to initialize.
-- put it in src/FDM since it is a class
src/FDM/MagicCarpet.cxx
-- bus data members now directly assigned to
src/FDM/Makefile.am
-- adds LaRCsimIC.hxx and cxx
src/FDM/JSBSim/FGAtmosphere.h
src/FDM/JSBSim/FGDefs.h
src/FDM/JSBSim/FGInitialCondition.cpp
src/FDM/JSBSim/FGInitialCondition.h
src/FDM/JSBSim/JSBSim.cpp
-- changes to accomodate the new bus
src/FDM/LaRCsim/atmos_62.h
src/FDM/LaRCsim/ls_geodesy.h
-- surrounded prototypes with #ifdef __cplusplus ... #endif , functions
here are needed in LaRCsimIC
src/FDM/LaRCsim/c172_main.c
src/FDM/LaRCsim/cherokee_aero.c
src/FDM/LaRCsim/ls_aux.c
src/FDM/LaRCsim/ls_constants.h
src/FDM/LaRCsim/ls_geodesy.c
src/FDM/LaRCsim/ls_geodesy.h
src/FDM/LaRCsim/ls_step.c
src/FDM/UIUCModel/uiuc_betaprobe.cpp
-- changed PI to LS_PI, eliminates preprocessor naming conflict with
weather module
src/FDM/LaRCsim/ls_interface.c
src/FDM/LaRCsim/ls_interface.h
-- added function ls_set_model_dt()
src/Main/bfi.cxx
-- eliminated calls that set the NED speeds to body components. They
are no longer needed and confuse the new bus.
src/Main/fg_init.cxx
-- eliminated calls that just brought the bus data up-to-date (e.g.
set_sin_cos_latitude). or set default values. The bus now handles the
defaults and updates itself when the setters are called (for LaRCsim and
JSBSim). A default method for doing this needs to be added to the bus.
-- added fgVelocityInit() to set the speed the user asked for. Both
JSBSim and LaRCsim can now be initialized using any of:
vc,mach, NED components, UVW components.
src/Main/main.cxx
--eliminated call to fgFDMSetGroundElevation, this data is now 'pulled'
onto the bus every update()
src/Main/options.cxx
src/Main/options.hxx
-- added enum to keep track of the speed requested by the user
-- eliminated calls to set NED velocity properties to body speeds, they
are no longer needed.
-- added options for the NED components.
src/Network/garmin.cxx
src/Network/nmea.cxx
--eliminated calls that just brought the bus data up-to-date (e.g.
set_sin_cos_latitude). The bus now updates itself when the setters are
called (for LaRCsim and JSBSim). A default method for doing this needs
to be added to the bus.
-- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no
longer exists ( get_V_equiv_kts still does, though)
src/WeatherCM/FGLocalWeatherDatabase.cpp
-- commented out the code to put the weather data on the bus, a
different scheme for this is needed.
ing features:
a) ADA Flight model - ADA.cxx, ADA.hxx, flight.hxx
b) Fighter a/c HUD - flight.hxx, hud.hxx, hud.cxx, cockpit.cxx, hud_ladr.c
xx, hud_card.cxx
c) 3-window display - options.hxx, options.cxx, viewer.cxx
d) Moving objects (ship) - main.cxx
e) Patches - main.cxx
ADA.cxx, ADA.hxx
--------------------------
Interface to the external ADA flight dynamics package.
flight.hxx
----------
Included prototypes for accepting additional data fron the External flight
model for fighter aircraft HUD
Hud.hxx
-------
Included prototypes for accepting additional data for fighter HUD from Exernal F
light model.
Defined FIGHTER_HUD pre-processor directive to enable compilation of fighter hud
code.
hud.cxx, cockpit.cxx, hud_ladr.cxx, hud_card.cxx
---------------------------------------
Included code to initialise additional reticles/text for fighter HUD which is co
nditionally
compiled if FIGHTER_HUD is defined.
options.hxx
-----------
Added window_offset, and function to retrieve its value for 3 windows
options.cxx
-----------
Changed few options to suit ADA/CEF projection system/screens and checks for win
dow offset.
views.cxx
---------
Added code to retrieve view offset for window.
Main.cxx
--------
Added code to load and move an aircraft carrier.
Patch to enable clouds from command line until Curtis fixes it. By default cloud
s are disabled.
- /engines/engine0/rpm changed to read-only
- /engines/engine0/egt added (read-only)
- /controls/mixture added
- /controls/propellor-pitch added (not used for C172)
BFI:
- getEGT() added
- getMixture() and setMixture() added
- getPropAdvance() and setPropAdvance() added (= pitch)
- cleaned up reinit function a bit
- force reinit only when values are actually changed; for example,
setting the flight model to the current flight model will not cause
a reinit
LaRCSim:
- hook up mixture and pitch to FGControls (they were hard-coded
before)
from the pre-ssg / render everything ourselves days. Replaced with a
material library manager that is much better suited for working in the
context of ssg. This simplified and cleaned up a ton of old junk.
This set of changes cleans up my previous ones quite a bit:
[tony@valkyrie FlightGear]$ tar -ztf tp_changes.tgz
src/Controls/controls.cxx
src/Controls/controls.hxx
src/FDM/JSBsim.cxx
src/Main/fg_init.cxx
src/Main/options.cxx
src/Main/options.hxx
src/Joystick/joystick.cxx
controls.[ch]xx: removed the trimmed_throttle stuff. This undoes the
changes I submitted last time.
JSBsim.cxx: updates for the removal of the trimmed_throttle stuff
fg_init.cxx: removed the autothrottle logic. The autothrottle is now
off
by default.
options.[ch]xx: Sets trim_mode to false by default. It is enabled only
when --notrim is not used and JSBsim is the FDM.
joystick.cxx: Added logic for syncing the throttle lever. This is
only enabled when trim_mode is enabled. The way I
did it is, I hope, a good way of going about it.
I tested:
fgfs --fdm=larcsim
fgfs --fdm=jsb --aircraft=c172 --vc=100 --altitude=500
fgfs --notrim --fdm=jsb --aircraft=c172 --vc=100 --altitude=500
All work as intended, at least for me.
Make sure your joystick is calibrated and give:
fgfs --fdm=jsb --aircraft=c172 --vc=100 --altitude=500
a try, I think you just might be impressed.
I am. ;-)
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
- knobs now continue to rotate when you hold down the mouse
- the middle mouse button makes knobs rotate much faster
- there are NAV1, NAV2, and ADF radios that can be tuned using the mouse
- there are standby frequencies for NAV1 and NAV2, and buttons to swap
- there is a crude, rather silly-looking DME, hard-wired to NAV1
- there is a crude, rather silly-looking autopilot that can lock
the heading (to the bug on the gyro), can lock to NAV1, and can lock
the current altitude
- the knobs for changing the radials on NAV1 and NAV2 look much better
and are in the right place
- tuning into an ILS frequency doesn't change the displayed radial for
NAV1
Code
- I've created a new module, sp_panel.[ch]xx, that constructs the
default single-prop panel; this works entirely outside of FGPanel,
so it is possible to construct similar modules for other sorts of
panels; all code specific to the default panel has been removed from
panel.cxx
- current_panel is now a pointer
- radiostack.[ch]xx keeps track both of the actual radial and of the
selected radial (they will differ with ILS); the NAV gauges should
not spin around automatically to show the actual radial (we need to
do something similar with the autopilot)
- the panel is initialized fairly early
- make sure that standby frequencies also get initialized
- I've started combining and clipping small textures to save texture
memory; there's a lot more to do, but at least I've made a start
Added Simulator/Clouds/
Durk fixed a problem in gui.cxx with cursor type.
Durk updated his time zone / time-offset command line parameters
Curt added a cheezy fade in/out as we transition through the cloud layer.
We really need to fog the sky dome, sun, moon, stars as well.
Curt added --enable/disable-clouds and --clouds-asl= to control clouds.
