fly/fgdata
1
0
Fork 0
Code Activity
5493 commits 7 branches 0 tags 4.4 GiB
Commit graph

1171 commits

Author SHA1 Message Date
ehofman
d5610fa98d Update the sound configuration 2009-11-09 09:50:59 +00:00
jmt
c57bfe7832 Dave Perry: parks gs needle when gs out of range, yoke-pa24 animation change to accommodate ap/joystick inputs 2009-11-08 18:51:39 +00:00
jmt
08aca14c8a Dave Perry: smooths transition to glideslope for CenturyIII autopilot 2009-11-08 18:48:54 +00:00
curt
1f00dadc43 Sébastien MARQUE: 
The zkv500 is now repaired (see attached patch) at least for turnpoint mode.
I'm quite sure there will have problem some problems with route management,
I haven't tested yet, but I'll do this week-end.

I've also fixed the screen refresh frequency, which is now more regular.
 2009-10-30 18:39:12 +00:00
daveluff
ca6fb8a271 Remove some junk characters from the upper half of the ASCII table, and convert a few stray tabs to spaces. This is only a cleanup - no values are changed. 2009-10-17 15:04:44 +00:00
jmt
69edaea2f4 Dave Perry: 
Added GS out of range flag to Instruments-3d/vor.

Century III upgrades
 1.  Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30.
 2.  Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
 2009-09-18 08:58:10 +00:00
sydadams
dfcae6b00f added mousewheel action to knobs 2009-09-17 21:02:05 +00:00
sydadams
1fc72cdd84 restored DME/RNAV distance display 2009-09-17 20:49:43 +00:00
sydadams
f0df2324d8 Added shift-LMB to the volume knob for the push-pull ident 2009-09-17 07:44:39 +00:00
sydadams
2aba2cd493 fixed frequency tranfer to nav when tuning on unused channel 2009-09-17 07:18:13 +00:00
sydadams
255d3f2790 removed obsolete file 2009-09-16 19:49:51 +00:00
sydadams
9e89aa315b pick animation updates 2009-09-16 17:40:46 +00:00
sydadams
f14087c807 code cleanup 2009-09-16 06:08:53 +00:00
jmt
310c375ebc PA-24 and PA-26 glideslope fixes from Dave Perry, including updated autopilot gains. 2009-09-13 08:10:56 +00:00
jmt
4678f67cb2 Initial work on standardising glideslope needle behaviour in aircraft. C172P works (including KAP140 APPR capture), and Primus-1000 based aircraft display correctly. 2009-09-09 10:49:36 +00:00
abory
9f28c3d5a9 - Alexis Bory: Added Mirage F1. 2009-08-31 20:30:50 +00:00
sydadams
a8c7c8080f fixed off center volume knob 2009-08-31 05:23:49 +00:00
sydadams
d7329ce4e0 transponder controller animation update 2009-08-09 21:25:07 +00:00
sydadams
f507db7113 fixed the CTL-62 - morse ident wasn't enabled 2009-07-15 04:17:15 +00:00
sydadams
90ac94548a flight timer update: 
activates at airspeed > 30 , shuts off at < 30
displays minutes:seconds up to 59:59 ,
then switches to hours:minutes
 2009-06-19 06:17:47 +00:00
tat
ceb41118fe Removed: fcs.nas; Renamed to helicopter-fcs.nas 2009-06-13 15:42:35 +00:00
tat
0fdd5ba0f4 Updated: to the latest fcs.nas; fcs.nas will be removed since it is only for helicopters (not a generic fcs) 2009-06-13 15:38:27 +00:00
tat
51f0a7897a Fixed: wrong usage of _setlistener 2009-06-12 18:00:53 +00:00
helijah
6ca37b3a42 *** empty log message *** 2009-06-11 22:55:36 +00:00
tat
41407b9448 Moved from OH-1/Nasal/fcs.nas, with the following updates: 
Added: Comments and explanations
Added: Backup FCS to fcs.nas
Modified: fcs for switching attitude / rate hold mode on CAS
 2009-06-11 11:52:20 +00:00
abory
2306a8371c - Add f-14b Dual Control. 2009-06-10 20:36:16 +00:00
helijah
a131434679 - fcs.nas generic by Tat 2009-06-09 17:07:47 +00:00
abory
bb061dce5c - Cosmetics. 2009-06-02 16:14:08 +00:00
abory
80bcce215a - Minor fix. 2009-05-30 06:46:21 +00:00
sydadams
d60f9332c6 ambient color fix 2009-05-30 00:55:01 +00:00
sydadams
eabdc4391b fixed reference to rgb files 2009-05-24 19:40:05 +00:00
abory
ad0dfdb64d - Skip testing tankers AGL as they are always high in the sky. Tune low AGL 
correction (better escape chances). Add carrier Vinson.
 2009-05-24 16:45:40 +00:00
abory
33c4c40f26 - Common miniature standby Adi. 2009-05-24 14:39:45 +00:00
abory
0a335cb692 - Common miniature standby ADI. 2009-05-24 14:38:49 +00:00
abory
d8461ddec7 - Update. Radar2 is now devived frm the last f-14b radar version. Added a 
standalone screen and HUD diamond as target marker.
 2009-05-24 13:32:52 +00:00
abory
52471e4666 - The model is now usable with rwr.nas or radar2.nas. ECM properties are now 
written to /instrumentation/radar2 (whenever we use rwr.nas or radar2.nas).
 2009-05-24 12:19:24 +00:00
abory
7d94c45308 - Standalone RWR script for aircrafts which don't radar2.nas features. 2009-05-24 12:16:08 +00:00
torsten
23963ef1c8 radiostack panel: 
- corrected inverted normals
- removed duplicate surfaces
 2009-05-18 20:16:17 +00:00
abory
04bf18553e - New chronometer. 2009-05-18 19:25:31 +00:00
abory
b0348c998a - USAF and USN common barometric altimeter. 2009-05-18 18:42:46 +00:00
abory
50abeffede - RGB replaced by PNG. Fixes colors. 2009-05-15 11:20:39 +00:00
sydadams
41cb0c79b7 updated pick animations , added shift click for ident button action 2009-05-09 02:13:06 +00:00
dfaber
98bead93b7 Some Logos and a generic Logo Submodel 2009-05-06 19:10:14 +00:00
helijah
65732e2376 - change color system 2009-04-29 16:26:31 +00:00
sydadams
2443c2258f material , pick animation update 2009-04-26 19:34:09 +00:00
sydadams
9cd8a18385 changed material 2009-04-26 19:32:40 +00:00
sydadams
ff6ceb0e24 one more material change 2009-04-26 19:32:01 +00:00
sydadams
bff22aee78 added mousewheel action to knobs 2009-04-26 03:35:45 +00:00
sydadams
5725eb5c07 added mouse wheel action to knobs 2009-04-26 03:34:47 +00:00
sydadams
2b6ad4146e fixed a pick animation error 2009-04-26 02:48:08 +00:00
curt
dcb7d9427e Fix the glide slope unavailable/warning flag so it actually works correctly. 2009-04-22 18:15:41 +00:00
curt
6ab2bca4ef Add a variant of the high res c172 rpm gauge that includes a working 
LCD hobbs meter (instead of the previous "static" hobbs meter that was pretty
but didn't ever change.)  This requires some aircraft specific nasal support
since the hobbs meter isn't implemented in the same way on every aircraft:

# initialize the hobbs meter and configure to save every 5 minutes
var hobbs = aircraft.timer.new("/instrumentation/clock/hobbs-meter-sec");
aircraft.data.save(5);
hobbs.stop();

setlistener( "/engines/engine[0]/running",
    func {
	var running = getprop("/engines/engine[0]/running");
	if ( running ) {
	    hobbs.start();
	} else {
	    hobbs.stop();
	}
    }
);
setlistener( "/instrumentation/clock/hobbs-meter-sec",
    func {
	var secs = getprop("/instrumentation/clock/hobbs-meter-sec");
	setprop("/instrumentation/clock/hobbs-meter-hours", secs / 3600);
    },
    1
);
 2009-04-22 18:11:23 +00:00
sydadams
b6ccd90066 texture update 
pick animation update
remove nasal dependency
 2009-04-17 04:19:51 +00:00
sydadams
1336f7b6df Texture change 
pick animation update
remove nasal file dependancy
 2009-04-17 04:17:46 +00:00
ehofman
849cf56a17 Set minthrottle to 0.1 for latest JSBSim engine codec172-sound.xml 2009-04-13 11:47:06 +00:00
ehofman
c935f28f90 reinstate full tyre squeal effects 2009-04-13 11:46:25 +00:00
ehofman
9638e5f1aa make the tire squeal audiable again. Need to find out why it doesn't work otherwise. 2009-04-13 10:01:03 +00:00
sydadams
6ed10f3005 the primus now needs a systems/electrical/outputs/efis for power source 2009-04-13 04:42:50 +00:00
mfranz
b7098b0bda Dave PERRY: pa24/instruments-3d: ambient & transparency fixes 
- Corrects ambient for pa24-250 oat and radio stack .ac files.
- Removes osg transparency artifacts for Century III mode switch.
 2009-03-25 19:07:20 +00:00
mfranz
073c711b89 Dave PERRY: fix ambient grey-out and texture for the pa24 yoke 2009-03-23 20:47:07 +00:00
mfranz
5cb5b0bc7e Dave PERRY: ambient color fixes 2009-03-21 21:11:55 +00:00
abory
54691b8309 - Check for NaN or neg values before math.sqrt(). 2009-03-21 17:17:18 +00:00
torsten
434a25d329 - change amb color 2009-03-20 08:49:15 +00:00
sydadams
ee515653aa ambient material update 2009-03-20 05:23:17 +00:00
sydadams
ca2f7d3ccd ambient material fix 2009-03-20 05:09:01 +00:00
sydadams
f3f633218c ambient material , pick animation, rgb to png update 2009-03-20 04:58:59 +00:00
sydadams
3f575ae9e8 fixed ambient material 2009-03-20 04:34:17 +00:00
sydadams
bb40350be2 fix ambient material and replace rgb with png texture 2009-03-20 03:41:06 +00:00
sydadams
efc039a2ed ambient material update 2009-03-20 03:20:29 +00:00
frohlich
b74fcbdc15 Set the ambient color equal to the rgb color. 
This is what currently is done in flightgears model loading stage anyway.

Modified Files:
 	Instruments/dme/dme.xml Instruments/kr87-adf/ki227_228.ac
 	Models/c172p.ac
 2009-03-19 08:17:27 +00:00
sydadams
46e7fcffe6 added flight timer ... 2009-03-19 06:54:21 +00:00
sydadams
77d976ef40 set elapsed time to start-stop with the CTL button 2009-03-19 04:08:44 +00:00
sydadams
1b6b77d788 Bring M877 clock up to speed ... 2009-03-18 03:37:52 +00:00
mfranz
96992eef67 don't start with "camera view", as the radar doesn't work there at the moment 2009-03-17 22:37:19 +00:00
mfranz
ed28a5efda model export: only report success on success :-) 2009-03-06 20:47:44 +00:00
torsten
0174df9bd6 improved KR87 ADF: nicer texture, pick animation 
removed unused files
 2009-03-06 12:50:05 +00:00
torsten
8f29103bbe - use named arg instead of arg[n] 
- save state to aircraft.data
 2009-03-06 12:42:34 +00:00
mfranz
719c2f4610 replace deprecated io.isdir(stat[2]) by stat[11] == "dir" 2009-02-15 20:49:16 +00:00
mfranz
e32cdecf37 replace deprecated io.isdir(stat[2]) by stat[11] == "dir" 2009-02-15 20:41:22 +00:00
sydadams
58d629ed13 Display , hotspot update 2009-02-15 09:32:11 +00:00
mfranz
5bc6fb2c62 - make it resizable 
- cleanup
 2009-02-09 22:27:26 +00:00
torsten
44434783c8 remove SenecaII dependencies 2009-02-09 15:32:03 +00:00
mfranz
959354c2aa Dave PERRY: improve the pa24 yoke to match aircraft interior photos 2009-02-08 21:42:36 +00:00
torsten
6feca1bda5 *** empty log message *** 2009-02-04 20:43:59 +00:00
ehofman
dbd3cf8a5a Sync. with JSBSim CVS 2009-01-26 20:37:19 +00:00
vmmeazza
aa96adf5a0 Remove leading "/" 2009-01-16 17:02:41 +00:00
mfranz
071eb664f8 export to a place where the security code actually allows it 2009-01-10 16:51:26 +00:00
vmmeazza
e27e1a73d8 Add Alexis Bory's nice glass shader texture for general use 2009-01-05 17:31:58 +00:00
stuart
3f99696e59 Add pre-takeoff tutorial, and fix some minor mistakes in other tutorials. 2009-01-04 22:07:33 +00:00
sydadams
c641c5306b glideslope pointer adjustment 2009-01-03 05:33:44 +00:00
stuart
997cbfc50a Split up tutorials into separate files, and add new tutorials for the c172p. 2008-12-31 16:25:45 +00:00
mfranz
a539007e3b remove unused file 2008-12-22 22:07:15 +00:00
martin
4b1b409f6f Heiko Schulz: 
Remove obsolete duplication.
 2008-12-13 22:24:37 +00:00
torsten
748ad889d4 Provide a proper(?) initialization of kma20 switches. 2008-12-12 10:58:26 +00:00
sydadams
ded0767b95 resized altitude ribbon texture .... was above 2048 size limit... 
Changed RAlt indicator range from 0-2500 ft to the correct 0-550 ft...
 2008-12-09 07:37:22 +00:00
sydadams
913635c47b Primus updates ... moving copies out of the Bravo and CitationX for easier management... 2008-12-08 02:49:08 +00:00
torsten
8ac84a94a9 New livery. In memory of D-ENMU 2008-12-06 15:42:00 +00:00
torsten
865441a597 swapped upper and lower kx165, so com1 is above com2 2008-12-06 11:41:41 +00:00
torsten
80268b4b48 - Added new intrument: ki266 dme indicator 2008-12-05 19:54:50 +00:00
torsten
5fa71805f9 - Added new intrument: ki266 dme indicator 
- Use global kx165 nav/com radios, not local copy
- minor repositioning of kap140
 2008-12-05 19:54:00 +00:00
torsten
75bb083354 New instrument: ki266 dme indicator 2008-12-05 19:51:42 +00:00
torsten
aaf625446e disable display when electrical /systems/electrical/output/dme is false 2008-12-05 19:50:00 +00:00
torsten
8b1b4b8d68 Added new intrument: kma20 Marker/Audio panel 2008-12-05 14:07:22 +00:00
torsten
8345ee9d6a New instrument: KMA20 Marker/Audio panel. 2008-12-05 14:06:06 +00:00
martin
7cd39fb3f3 Heiko Schulz: 
-new better panel
-added lights and made them switchable
-doors can be open now (pick animation)
-added some liveries by Brett Harrison
-added paintkit by Brett Harrison
-converted liveries to png
-replaced radio stack with 3d-radios, DME and marker-lights yet missing
-minor bugfixes
-added glass shader with fresnel effect

still work on the interior to do like the seats, walls and so on...
 2008-12-04 23:13:09 +00:00
martin
922a09ebcf Heiko Schulz: 
-new better panel
-added lights and made them switchable
-doors can be open now (pick animation)
-added some liveries by Brett Harrison
-added paintkit by Brett Harrison
-converted liveries to png
-replaced radio stack with 3d-radios, DME and marker-lights yet missing
-minor bugfixes
-added glass shader with fresnel effect

still work on the interior to do like the seats, walls and so on...
 2008-12-04 22:44:18 +00:00
torsten
d1b2744985 make use of new Node.initNode() method 2008-11-21 09:21:03 +00:00
mfranz
6f6aef2fed change from deprecated props.initNode() to props.Node.initNode() 2008-11-20 20:00:26 +00:00
mfranz
084db07606 use global D2R, R2D (dumbed down PI instead of math.pi is a bad idea, anyway :-) 2008-11-20 11:46:45 +00:00
mfranz
f277c52fd7 use global constants D2R, R2D, M2FT, FT2M 2008-11-20 11:26:41 +00:00
mfranz
0e63bc73bc also dump a google maps link 2008-11-19 21:47:51 +00:00
mfranz
8d9eb9190e initialize /sim/model/livery/file so that it gets sent via MP 2008-11-18 18:36:20 +00:00
torsten
bdd32a47bf added ki266 3d-instrument, see ki266.xml for help 2008-11-03 16:18:06 +00:00
helijah
53406990dc - fixed some bugs + more airport infos + multikey system 2008-11-02 15:50:21 +00:00
martin
bf59d755aa Brett Harrison: 
Some different liveries made after real aircraft
 2008-10-31 18:40:32 +00:00
curt
23e8a4004b Fixes to track recent development changes. 2008-10-30 19:20:19 +00:00
torsten
fcffbe5986 Csaba Halász: Be advised that the texture repeat parsing of the osg ac3d loader 
plugin changed on 3rd of october.
This means, textures without a "texrep" value will not repeat any more.
This might affect texture animations, such as in the case of kx165
 2008-10-17 09:11:14 +00:00
mfranz
c350a7b6a8 s/fixpath/normpath/ (as in python) 2008-10-15 16:35:11 +00:00
mfranz
09a682a610 cmdarg() in listener functions is no longer supported; use regular func args 2008-10-12 20:35:38 +00:00
mfranz
832c035499 cmdarg() in listener functions is no longer supported; use regular func args 2008-10-12 19:09:14 +00:00
mfranz
0b453c6da3 - drop cmdarg() usage in listener functions 
- use var keyword
 2008-10-12 18:50:06 +00:00
torsten
838dff7b5f consolidated multiple actions into single pick animations 2008-10-12 17:33:57 +00:00
martin
3465b98f40 Myself: .... didn't load the default livery properly. 2008-10-12 14:59:14 +00:00
martin
3c589caf9d Heiko Schulz: 
....  didn't load the default livery properly.
 2008-10-12 13:56:41 +00:00
torsten
4498e9b4b0 property-save code simplification 2008-10-12 13:42:23 +00:00
martin
5558852110 Unify line endings 2008-10-11 23:17:23 +00:00
martin
20d64b1fb1 Fix typo. 2008-10-11 22:59:22 +00:00
martin
c64d2e1b69 Heiko Schulz: 
Binary files for C172-update
 2008-10-11 22:46:58 +00:00
martin
f30e034e55 Heiko Schulz: 
A big step at bringing the default aircraft into the state it actually
deserves.

Features:
- new, accurate exterior modell, modelled with original 3-views by Cessna
- textures with shadow shading
- livery changing sytem over mp
- immatriculation over mp
- glass shader with fresnel effect
- nearly complete 3d-panel

Known Bugs:
- Radio_Stack shines through the fuselage. New 3d radio_stack has yet to be done.

To-Do:
- Suction-Instrument
- Interior with much more details and painting
- Radio_stack
- doors openable
- lights
- fully animation of the gear
- failure system by Erobo
 2008-10-11 21:50:45 +00:00
abory
f704f0ac0a - Alexis Bory: Small texture adjustment. 2008-10-11 16:58:23 +00:00
torsten
69de20781e added the instrumentation/comm[n]/dimming-norm property to make digits dimmable 2008-10-10 19:05:38 +00:00
torsten
1866de1485 Added Bendix/King KX 165 COMM/NAV Radio with configurations for use as COMM1 and COMM2. 2008-10-09 19:11:06 +00:00
abory
483ce7b71b - Alexis Bory: Added datas for the RWR. 2008-10-08 21:07:05 +00:00
abory
c3906764fa - Alexis Bory: I knew it was too soon to fasten these screws. 2008-10-08 19:18:02 +00:00
vmmeazza
5a642cc2e6 Update parameters 2008-10-08 17:30:37 +00:00
vmmeazza
ee515582d0 Add rain spray effect 2008-10-08 16:51:40 +00:00
abory
0e62b49afa - Alexis Bory: Added new instrumet RWR. 2008-10-08 13:58:52 +00:00
abory
4cb1bff258 - Alexis Bory: Only remove a debug print. 2008-10-08 13:34:32 +00:00
abory
0714e08992 - Alexis Bory: Added a normalized property for RWRs. Minor fixes. 2008-10-08 13:23:38 +00:00
vmmeazza
0f0ac568d4 Add generic tyre smoke 2008-10-05 22:53:41 +00:00
abory
5d87e8a5d3 - Alexis Bory: Path fix. 2008-10-05 14:47:21 +00:00
abory
3600255914 - Alexis Bory: radardist.nas radardist.xml have nothing to do here. 
Moved permanently to Aircraft/Instruments-3d/radardist/.
 2008-10-05 14:32:44 +00:00
abory
6f86f4e516 - Alexis Bory: The f-14b radar system, now called radar2.nas and made generic. 2008-10-05 14:27:58 +00:00
abory
b5977955ef - Alexis Bory: Radardist has nothing to do in Aircraft/Generic. 
- New utility functions get_aircraft_name() and radar_horizon().
    - Also small update to the aircrafts list.
 2008-10-05 14:25:22 +00:00
abory
ac84c93b68 - Alexis Bory: minor fixes. 2008-09-27 20:33:29 +00:00
mfranz
8d6c593c35 flightplan export: don't complain if no waypoints are set 2008-09-25 23:08:18 +00:00
torsten
e8de9bda15 Ron Jensen: 
This is a patch to the c172p fdm to add pointmasses for all four
occupant positions and baggage.  The X locations were taken from the
c172 type certificate 3A12 dated September 15, 1998.  As the new
pointmasses have a weight of 0 they will not affect the current model,
however we are extending the FlightGear weight and balance dialog for
JSBSim and the pointmasses have to be defined.
 2008-09-01 15:14:33 +00:00
ehofman
23b0c9f6cb Update engine performance to match the latest version of JSBSim 2008-08-26 07:56:56 +00:00
mfranz
b60406b905 remove garbage 2008-08-18 09:34:12 +00:00
mfranz
c801bd4ab0 remove garbage 2008-08-18 09:19:25 +00:00
mfranz
c23971dcca aar.nas: minor cleanup 2008-08-14 21:38:32 +00:00
mfranz
2e6ffd34e6 s/system/type/ ... that's more consistent with the rest and less confusing 2008-08-13 22:56:21 +00:00
mfranz
2e6a1dc224 - make sure that aircraft can only refuel from tankers which support the 
appropriate system ("probe" or "boom")
- use props.initNode()
- cosmetics
 2008-08-13 22:03:59 +00:00
mfranz
0ccd7a62cd let aircraft declare from which refueling system they can receive 2008-08-13 22:00:54 +00:00
ehofman
f720eeb2ef Sync. with JSBSim CVS 2008-08-08 08:56:08 +00:00
abory
f951225d81 Removed pointless creation of a geo.Coord . 2008-08-02 14:58:42 +00:00
helijah
c231262e50 - GPS update by Zakharov 2008-07-28 17:19:52 +00:00
helijah
454950d0f9 - GPS update by Zakharov 2008-07-21 22:42:01 +00:00
abory
ea43922437 - Alexis Bory: use io.read_properties() instead of fgcommand(load). 2008-07-17 21:06:29 +00:00
helijah
763860f42c - new version with doc by Zakharov 2008-07-14 14:40:22 +00:00
abory
5eaebdb728 - Alexis Bory (and Melchior): 
- Changed properties name in the XML: radardist -> radar-performance.
- Corrected spelling of data.
- Shortened the init message.
This doesn' change the way to call radardist.nas functions.
 2008-07-11 21:10:48 +00:00
abory
dde3389421 - Alexis Bory: radardist.nas now reads its datas from $FG_ROOT/Aircraft/Generic/radardist.xml. 2008-07-08 10:16:38 +00:00
abory
5c054b5afc - Alexis Bory: radardist.nas now reads its datas from this XML file. 2008-07-08 10:08:51 +00:00
helijah
bdf204bcc1 - Update GPS zkv500 by Zakharov 2008-06-30 16:31:48 +00:00
helijah
5e9df124b6 *** empty log message *** 2008-06-30 00:17:21 +00:00
helijah
7e81bb94ff - new instruments : GPS zkv500 by Zakharov 2008-06-28 19:38:32 +00:00
abory
166f5c8b96 - Alexis: oops, should better test before committing. 2008-06-05 21:10:43 +00:00
abory
ba83e856cf - Alexis: ooops I forgot Jettoo's last additions in the tables. 2008-06-05 19:44:09 +00:00
abory
40d9b0e400 - Jettoo (glazmax) and Alexis: Radar Visibility Calculator. 2008-06-05 19:37:32 +00:00
mfranz
f8f63fcd8d use props.initNode() & simplification 2008-06-04 20:52:09 +00:00
sydadams
51344a09ec a few more updates , cleanups ... 2008-05-22 07:00:45 +00:00
sydadams
5b020a450a updates from Ron Jensen 2008-05-22 02:30:49 +00:00
mfranz
205675455c - make modelmgr a singleton class 
- add selected_models() function
- fix help screen
 2008-05-21 23:33:23 +00:00
mfranz
d12dfeda42 bah ... put the clone/copy function on the 'c' 2008-05-10 18:27:15 +00:00
mfranz
8361721c72 make Shift-d clone all selected objects (same key as in Blender :-) 2008-05-10 18:23:52 +00:00
mfranz
a571440567 - let Ctrl-g have the same meaning as g (necessary for LMB emulation) 
- more cosmetics
 2008-05-10 11:09:33 +00:00
mfranz
4c16eacf96 - make MMB-transformation step size depend on viewer distance 
- add cursor.ac to the model selection list (useful as rotation center)
 2008-05-09 20:40:10 +00:00
mfranz
6e36e21f7b - support *.osg models (priority: *.xml -> *.osg -> *.ac) 
- cleanup
 2008-05-09 16:47:38 +00:00
mfranz
e5b1c408dc mouse walk -> operation mode: with Ctrl modifier down, don't move the 
ufo position, but the selected objects: ctrl-mmb left/right/up/down move
the objects left/right/away/nearer, and ctrl-mmb-lmb l/r/u/d rotate them
all around the active object ('m'-key marker!) or raise/lower them.

(the gear-key 'g' can for now be used as a Ctrl replacement for people
with 2 button mouse; will probably be moved to a better place ...)
 2008-05-08 20:11:39 +00:00
mfranz
59d9f53e57 mouse walk: wrap mouse, so that the walking range is only limited by the 
size of the mouse pad, not by the screen size  :-)
 2008-05-08 10:23:19 +00:00
mfranz
076bc0f176 mouse walk: don't use Ctrl+MMB for left/right/up/down, but MMB+LMB 2008-05-07 18:03:38 +00:00
mfranz
3d1582798a - center controls when starting/stopping mouse walk, as well as at startup 
- make shift modifier increase walking speed
 2008-05-06 22:49:02 +00:00
mfranz
ef20bebf4f mouse walk: a bit more progression on x/y/z; no progression on hdg change 2008-05-05 21:47:39 +00:00
mfranz
49763a91b0 move dialogs up so that the mouse button listener doesn't bark 2008-05-05 18:45:21 +00:00
mfranz
53958680a8 center adjust dialog sliders on mouse walk 2008-05-05 18:16:05 +00:00
mfranz
b4b686b5ff let Mouse Walk zero the throttle 2008-05-05 17:31:36 +00:00
mfranz
7f42abb076 - Do The Mouse Walk. ... MMB[+Ctrl] drag in pointer mode 
- drop redundant braces
 2008-05-05 13:22:01 +00:00
mfranz
623dcb0602 g-click: 
- don't open status dialog if not necessary
- adjust ufo heading to view direction
 2008-05-04 21:56:34 +00:00
mfranz
67b14bb1ae Francesco BRISA (& me): add teleport function 
When holding the gear key or button down (as a kind of modifier) and after
left-clicking on the terrain, teleport the UFO to the click position.
Keep heading if no model is active, otherise look there. Keep altitude-agl.
 2008-05-04 21:16:48 +00:00
sydadams
1fd7c79eea removed testing nasal file... 2008-05-03 16:05:19 +00:00
sydadams
05e0e19087 Added runway offsets and other minor changes 2008-05-03 02:47:34 +00:00
mfranz
2f8b4b02ac add unit suffixes -nm and -deg to /sim/presets/offset-{distance,azimuth} 2008-05-01 21:29:39 +00:00
mfranz
a197f006ae enable Exorcist-style head turns, so that we can disabled them globally 2008-04-15 17:26:02 +00:00
stuart
5fdf9e3831 Rename quadrant Propellor object to avoid collision for C310 objects. 2008-04-13 17:45:43 +00:00
mfranz
3e99323d0e if (exactly) two objects are selected, print the direct distance to the screen 2008-03-18 22:58:42 +00:00
mfranz
0c38aa1e8c Stewart ANDREASON: 
- fix --altitude in dumped command line ('d'-key)
- implement vertical movement on Home/End and KP7/1
 2008-03-12 20:47:53 +00:00
sydadams
64066c93ee *** empty log message *** 2008-03-04 01:27:51 +00:00
sydadams
89ae48a97a Electrical updates from Ron Jensen 2008-02-17 23:17:41 +00:00
mfranz
45efa41608 Dave PERRY: 
"All the pa24 and pa28 and Seneca II hot spots are now visible in osg and
plib with ctrl-c."
 2008-02-02 17:45:27 +00:00
sydadams
47b4d2f98e *** empty log message *** 2008-01-17 00:54:17 +00:00
sydadams
527959b8b3 fixed radar whiteout and hotspot alignment 2007-12-27 11:50:23 +00:00
sydadams
1ef0b7cf8a Added field-of-view to the save file of my aircraft 
Updated the radar to a 2d screen , still not working 100%
 2007-12-27 03:27:09 +00:00
sydadams
d64a6dba06 material lighting update 2007-12-22 23:38:37 +00:00
sydadams
24572f14db Updated kfc200 FD mode operation... 
Material lighting updates ....
 2007-12-22 23:37:14 +00:00
sydadams
d642797371 Updated my 3d kr-87adf reciever to use Curt's kr-87 code instead of instruments/adf .... 2007-12-22 23:31:45 +00:00
sydadams
c07a7c266e changed wxradar to radar ... 2007-12-18 07:13:10 +00:00
sydadams
28f416c6d5 a few Primus 1000 updates ... 2007-12-16 09:45:43 +00:00
mfranz
a7cdd684a1 add a "Camera View", which is an exact copy of "Cockpit View" and selected 
(but disabled) by default. You won't notice any difference, unless you
place, let's say, an A-10-model.xml in the scenery. Some of the A-10's "select"
animations unselect the fuselage and other parts, when they thinks the A-10
is in cockpit view, not knowing that it's actually the *ufo*, which is in
cockpit view.
 2007-12-14 10:50:02 +00:00
sydadams
6f1b020d68 fixed the PFD VOR2 pointer to point to nav[1] vor heading ... and var-ified 2007-12-12 05:57:24 +00:00
sydadams
89467fe9ca Added hotspots and nasal file for the b1900d trancievers ... didnt realize they only had OSG hotspots... 
and nasal control because the <bias> tag doesn't seem to work here
 2007-12-12 05:31:44 +00:00
sydadams
51465fa2f4 Added more P1000 controllers .... 
Flight Director still broken ...
hopefully tomorrow ...
 2007-12-09 09:07:38 +00:00
sydadams
eaba85f3bb MFD temporary fixes ... 2007-12-07 04:39:45 +00:00
sydadams
3ee01413d1 disabled autopilot on ground... 2007-12-05 06:18:49 +00:00
sydadams
f07c189652 Added hotspots for the autopilot and remote instrument controllers 2007-12-05 05:13:51 +00:00
sydadams
3b5333d02b some nasal var and error fixes ... 2007-12-03 07:18:24 +00:00
mfranz
52ed2de4c3 Roy Vegard OVESEN: add "var" keywords 2007-11-28 20:09:59 +00:00
mfranz
89bd7a21cd Dave PERRY: remove two <global> in material animations 2007-11-26 15:10:26 +00:00
mfranz
5d26f635bf Dave PERRY: 'adds "var" for local variables' 2007-11-25 20:43:43 +00:00
sydadams
d2f304f030 Updates to the P1000 , older files will be removed once its all sorted out 2007-11-21 04:56:00 +00:00
martin
56eb66f03b Torsten Dreyer: 
This patch for the 3d artificial horizon enables the movement of the
reference bar like the 2d instrument and corrects the wrong display of
pitch.

The original version already has a reference bar object in the .ac file
called bezel, but it is not bound to a animation. And the pitch is
indicated approx. 25% low so a pitch of +10deg is indicated as approx.
7deg.
 2007-11-09 12:10:36 +00:00
mfranz
28def78cef write proper END <wpt> 2007-10-18 21:31:29 +00:00
mfranz
33805eaa58 export flightplan on 'n'-key 2007-10-18 21:20:39 +00:00
mfranz
9ce73af7a4 replace depreciated cmdarg() in listener functions by regular arg 2007-10-15 18:59:34 +00:00
mfranz
7253f8633b Dave PERRY: 
"I have been working with Torsten Dryer to model
these three autopilots that are very common in aircraft manufactured in
the 1960s through the late 1980s.  The Altimatic IIIc in the SenecaII is
a variation on the Century III and uses the same nasal model."

mf: these should be in cvs since a while; somehow I missed them, sorry
 2007-10-14 07:24:35 +00:00
mfranz
8565e887db Dave PERRY: 
"For more than a month, I have been working with Torsten Dryer to model
these three autopilots that are very common in aircraft manufactured in
the 1960s through the late 1980s.  The Altimatic IIIc in the SenecaII is
a variation on the Century III and uses the same nasal model."
 2007-10-10 20:48:36 +00:00
mfranz
ecb335ddb5 - use var keywords on functions to avoid module name collisions 
- drop some braces
 2007-10-01 22:31:30 +00:00
sydadams
07fd1b5ee6 Moved Davtron M877 chronometer into Instruments-3d/clock since it is a common instrument... 2007-09-22 20:42:39 +00:00
sydadams
3122e459d6 *** empty log message *** 2007-08-21 05:35:40 +00:00
sydadams
a7f90a8cb8 Changed speed match function to use target distance instead of airspeed ... not perfected yet ,but better ... 2007-08-20 06:22:06 +00:00
sydadams
514f2c1ce7 cam updates from pigeon ... 2007-08-20 04:22:36 +00:00
sydadams
0a92d4c802 Updated RDR-160 wxradar to use Vivian's enhancements... 
Added a wxradar hotspot file...
Updated Aerostar's radar hotspots
 2007-08-10 06:24:20 +00:00
mfranz
bff5a62666 - dos2unix 
- texture compression
 2007-08-05 12:51:26 +00:00
mfranz
34d5d0df85 Dave PERRY: various fixes and improvements (hotspots, lighting, ...) 2007-08-05 12:38:55 +00:00
mfranz
aebc22d105 - add tanker to ai aircraft section 
- minor reorganization
 2007-07-27 17:41:59 +00:00
sydadams
8a974bc9c1 Updates to flightdirector... 
Added PLIB hotspots to DC550 controller...
Adjusted AP controller hotspots
 2007-07-17 07:30:27 +00:00
sydadams
bd9a8f5fca More Primus 1000 and Bravo updates... 
Flightdirector being reworked , modes currently not displayed correctly on the PFD
 2007-07-16 06:05:16 +00:00
sydadams
16db10581a added arial_black and condensed fonts for the Primus 1000 PFD 2007-07-15 21:28:52 +00:00
mfranz
41fef27ec0 die, yellow glider, die! 2007-07-11 17:24:32 +00:00
mfranz
26e9387de3 don't show on mpmap 2007-07-11 16:55:55 +00:00
mfranz
5e6f9dde43 - add aircraft select dialog (^-button) 
- disable smooth throttle for now (breaks non-js-throttles)
 2007-07-09 22:32:58 +00:00
mfranz
1fefa1c206 Syd's MIBS: 
A camera tool for making fgfs videos (heavily used by Michelle) and for
tracking MP and AI aircraft. It's planned to include this into the regular
ufo, but for now it's better to keep them separated. Comes with its own
panel, which (hopefully) is self-explaining.

Shouldn't be announced on the fgfs page as separate aircraft (if that's
possible). Work in progress ...
 2007-07-08 18:15:02 +00:00
sydadams
a3fdbf8456 Added a flight-hour-meter property in /instrumentation/clock .... saves your flight time to file... (thanks Melchior) 2007-07-07 23:10:00 +00:00
mfranz
04f9a0b2ea s/wxradar/radar/ 2007-07-02 06:03:45 +00:00
sydadams
a6c2bb3115 Updating the Bravo to where it was before I reinstalled my OS ... not nearly done yet 2007-07-02 05:53:18 +00:00
mfranz
d1adc37872 fix export file format (the <models> tags got lost in one of the last commits) 2007-07-01 13:07:08 +00:00
vmmeazza
f547f4188a Add clouds 2007-06-30 20:28:27 +00:00
vmmeazza
23bb26651d Alternative orange textures for the radar 2007-06-29 13:40:52 +00:00
mfranz
2ee85ac82b add wx-toggle, data-toggle, echo-toggle hotspots to the radar. (Same order 
as on the 737 panel, but no labels yet. Aliens don't need that stuff.)
 2007-06-25 21:23:28 +00:00
mfranz
4866bfb66f - shorter update intervals (ufo technology!) 
- only update the radar when the panel is actually visible
 2007-06-24 22:45:10 +00:00
mfranz
3cdf961214 s/wxradar/radar/ 2007-06-24 19:58:20 +00:00