fly/terragear
1
0
Fork 0
Code Activity
1112 commits 1 branch 0 tags 14 MiB
Commit graph

1112 commits

This branch
This branch
All branches
Author SHA1 Message Date
curt
d05fd4a8ff Big round of cascading FG -> TG name cleanups (once you get going it's hard 
to stop.) :-)

Also save elevations of 3d polygons into a separate lookup list when they
are loaded by the clipper.
 2003-03-13 21:20:46 +00:00
curt
4abf503817 Rewrite for loops with out iterators so they are more readable. 2003-03-13 20:47:58 +00:00
curt
b66f8ce695 Minor tweaks. 2003-03-13 20:47:31 +00:00
curt
ccde971251 Added support for loading 3d polygons. 2003-03-13 20:37:51 +00:00
curt
727e512fad Not that it should matter but change the thresholds a bit to be consistant 
with what I do in other portions of the code.
 2003-03-13 20:26:56 +00:00
curt
d70cd72fbd Don't automatically try to preserve polygon elevations, but instead provide 
a method() to inherit elevations from another polygon.  This gives the calling
layer much more control over preserving or not preserving elevations.
 2003-03-13 20:25:02 +00:00
curt
ba3114a8b5 Fixed a compile warning. 2003-03-13 20:23:15 +00:00
curt
c5ab6678f2 Added support for including height information in the intermediate polygon 
format.  The big trick was that the polygon clipper is completely 2d.  So
I needed to add code to preserve the elevations in the clipped output and
fill in plausible elevations for any new points created as a result of the
clipping.
 2003-03-12 21:25:35 +00:00
curt
9c85f16b5f Working towards the ability to specify elevations for a polygon in it's 
intermediate mode.  The goal then is that these elevations would be
preserved throughout the tile construction process and the surrounding
geometry would fill in without gaps.  This has potential applications for
airports and runways of course as well as roads, rivers, streams, railroads,
or any other object where we might want to control the final elevation in
advance.
 2003-03-12 18:23:31 +00:00
curt
af89a8a205 Add a utility to reassemble all the array files for a 1x1 degree area and 
write them out in a dumb ascii array format.
 2003-03-11 20:22:16 +00:00
curt
7c3f6dd15d Dohhh, I knew I would screw it up the first time. But no, I doubly screwed 
it up.  Read the rows from bottom to top rather than top to bottom and
flipped row/col ...
 2003-03-11 20:21:30 +00:00
curt
c9757cb753 Add the ability to extract out an individual elev by array position rather 
than only by lat/lon.
 2003-03-11 20:20:04 +00:00
curt
b3935db989 Add back code to clip polygons against land mass. This temporarily breaks 
the ability for roads/railways to bridge ocean, but I hope to get that fixed
soon.
 2003-03-11 20:19:09 +00:00
curt
ea58728f5c With the latest version of the libnurbs++, the include file extension has 
changed from .hh -> .h
Generate a complete enclosing area around the airport including taxiways,
  not just runways.
 2003-03-11 20:17:57 +00:00
curt
1bfc2da8ee Fix a compile problem for some platforms/compilers. 2003-03-11 16:04:49 +00:00
curt
6c26352508 Avoid telling the nurbs library to do something it can't do (resulting 
in a segfault.)
 2003-03-10 15:01:08 +00:00
curt
4bb5decbcb A simple perl::GD script to convert .hgt to a .png for visualization purposes. 
The explicite draw each pixel method is inefficient, but used anyway to make
it utterly clear what the data order is in the original .hgt file.
 2003-03-10 14:56:12 +00:00
curt
266772ee39 Add a routine to dump out the .hgt data in a simplistic ascii format. 2003-03-10 14:54:42 +00:00
curt
bf96033516 Tweaking parameters. 2003-03-10 03:00:59 +00:00
curt
c986802faa The resulting airport surfaces still had too much undulation from the noise 
in the DEM data.  Coarsen the nurbs grid and average some surrounding data
to hide the noise.
 2003-03-09 19:19:19 +00:00
curt
846473a424 Make each representative grid point the average of a larger set of points. 2003-03-09 18:51:00 +00:00
curt
d61e2d958b Since configure refers to these files, it seems like a good idea to actually 
add them.
 2003-03-09 18:14:19 +00:00
curt
c170e77854 Switch to calculating node elevations based on the nurbs surface rather 
than raw dem data.
 2003-03-09 18:13:53 +00:00
curt
abd30e0352 Initial revsion of testnurbs.cxx which exercises some basic capabilities of 
the nurbs++ library.
 2003-03-09 18:12:25 +00:00
curt
15ae058d4a First stab at code to build a nurbs surface that approximates the surface 
of an airport.
 2003-03-09 18:11:29 +00:00
curt
b628d7cdd8 Add a check for the nurbs++ library. 
Add a README.nurbs++ explaining where the nurbs++ package can be found
  and a bit about what it is.
 2003-03-09 18:10:32 +00:00
curt
83388f0c38 Switch to bool return types. 2003-03-09 17:27:07 +00:00
curt
0d53ec0be0 Fill in "void" data with surrounding data. 2003-03-09 17:22:22 +00:00
curt
e55881e063 More informative output. 2003-03-09 17:21:47 +00:00
curt
887297d8d0 A slightly more flexible way to find the best elevation data. 2003-03-08 03:25:05 +00:00
curt
e7d08d90d1 A couple minor changes to this helper script. 2003-03-08 01:44:28 +00:00
curt
e6c1dc4c0c Rewrite the line to polygon making routine to (hopefully) make the 
line widths consistant and accurate always.
 2003-03-08 01:43:47 +00:00
curt
1a741df940 Remove an unneeded define. 2003-03-08 01:42:46 +00:00
curt
1a46456fbd Use .arr as the intermediate height field rather than .dem since .dem 
implies a different format.
 2003-02-27 21:19:00 +00:00
curt
e483bf0a34 Switch to using .arr as the intermediate height elevation array file extension. 2003-02-27 21:13:17 +00:00
curt
15ba15538b Output file is written with a ".arr" (Array) extension since it's no longer 
in .dem format.  The .arr format is a much simpler (and a bit less flexible)
specifically for use as an intermediate format when building scenery.  Any
number of various raw terrain formats could be translated into the common
.arr format which then greatly simplifies life for the build tiles util.
 2003-02-27 21:06:57 +00:00
curt
d11e7c7b3f First crack at a Prep utility to process SRTM "hgt" data into TerraGear's 
intermediate format.
 2003-02-26 21:39:27 +00:00
curt
61764b286d Renamed FGTexParms -> TGTexParams. 2003-02-26 21:20:43 +00:00
curt
0e4f17ad51 Rename FGRunway -> TGRunway. 2003-02-26 21:16:43 +00:00
curt
62a3a1936c Rename FGSuperPoly -> TGSuperPoly 2003-02-26 21:09:39 +00:00
curt
bd1b254506 Rename: FGPolygon to TGPolygon 2003-02-26 20:59:34 +00:00
curt
7709953518 Rename: FGGenFans -> TGGenFans 2003-02-26 20:36:15 +00:00
curt
61445e9af6 Renaming: 
- FGContourNode -> TGContourNode
 - FGTriNodes    -> TGTriNodes
 - FGTriSeg      -> TGTriSeg
 - FGTriSegments -> TGTriSegments
 2003-02-26 20:25:29 +00:00
curt
d2206e9214 Rename: FGDem -> TGDem 2003-02-26 20:04:12 +00:00
curt
0a1108e494 Rename: FGArray -> TGArray 2003-02-26 19:59:25 +00:00
curt
595ed50097 Add src/Libs/HGT subdir. 2003-02-26 19:57:26 +00:00
curt
698fb1b869 Add HGT subdir 2003-02-26 19:57:04 +00:00
curt
f048b73a9a Clean up various accumulated cruft. 2003-02-26 19:56:39 +00:00
curt
1d71909929 Initial revision of code to read SRTM "hgt" format data. 2003-02-26 19:30:25 +00:00
curt
38c42b34fb Additional tweaks for 0.0.5 release. 2003-02-25 19:16:13 +00:00