The typo was introduced in 7e607b8403 from July
2016. The result was a series of alert messages such as:
savexml: writing to 'Path "/flightgear/home/.fgfs/runtime-jetways/0.xml"' denied
(unauthorized directory - authorization no longer follows symlinks)
This allows the sources and headers in src/Main/ to be used by other targets.
They are grouped into the new "Main" flightgear component via the macro in the
FlightGearComponent CMake module. The bootstrap.cxx file with its main function
has been separated out into a separate variable MAIN_SOURCE for use by the fgfs
binary.
All these files have therefore been removed from the test_suite CMakeLists.txt
file, as they are added via FG_SOURCES and FG_HEADERS. The MSVC grouping code
also does not need to deal with the now deleted separate SOURCE and HEADER
variables for these files.
This is for simplifying the main src/Main/CMakeLists.txt file and allowing the
code to be shared with the test suite.
The generated source and header files have also been removed from the main
source list and placed in the CMake module as the global variables
EMBEDDED_RESOURCE_SOURCES and EMBEDDED_RESOURCE_HEADERS.
New methods Addon::createStorageDir() and Addon::getStoragePath() with
corresponding Nasal bindings in the addons.Addon ghost:
createStorageDir() method (returns the dir, doesn't fail if it already
exists)
storagePath read-only attribute to get the dir
The directory reserved for each add-on is
$FG_HOME/Export/Addons/ADDON_ID, but please use the above methods (or
the corresponding C++ ones) to avoid hardcoding such paths in your code.
Also create directory $FG_HOME/Export/Addons in fgInitConfig() as a way
of reserving the namespace, in order to prevent future failures in case
someone would have the strange idea to create it as a file...
If an add-on has a file named addon-menubar-items.xml in its base
directory, load it and add its items to the FG menubar.
Logically, fgStartNewReset() should call
flightgear::addons::AddonManager::instance()->addAddonMenusToFGMenubar()
in order to re-add the items, however doing so would cause the
add-on-specific menus to be added one more time on every reset, because
for some reason, commit 45ea8b5daa added
the PRESERVE attribute to /sim/menubar (apparently to preserve the state
of menu entries upon reset?).
Note: the addon-menubar-items.xml files are reloaded during reset,
however the menu bar doesn't reflect this, since adding the
reloaded items to the menu bar in fgStartNewReset() would cause
the add-on-specific menus to appear several times in the menu bar,
as explained above.
The add-on framework now uses the following files in each add-on
directory:
- addon-config.xml (previously: config.xml)
- addon-main.nas (previously: main.nas)
This is consistent with the addon-metadata.xml file that is already part
of the interface between FG core and add-ons. The goal is to make it
clearer, when browsing an add-on directory, which files belong to the
"FG core <-> add-on" interface and which files belong to the add-on
proper. This will be beneficial also when more files are added to the
"FG core <-> add-on" interface, such as possibly addon-events.xml in the
future.
This change is incompatible, thus it is the right time to do *before*
2018.2.1 is out, especially considering that this upcoming release
already has incompatible changes in the add-on API, namely the
requirement of the addon-metadata.xml file and the type of the argument
passed to each add-on's main() function. We'll try harder not to break
compatibility in the add-on API once 2018.2.1 is out. For now, it is
still a good time to try to get the API as clean as possible.
If running with the launcher, and FG-home is read-only, show a warning
to the user, since this is probably a surprise to them.
(In non-launcher mode we don’t show the box, since it’s more likely to
be an intentional duplicate launch)
This makes it possible to look up files from add-on directories using
for instance FGGlobals::resolve_resource_path(), passing a string such
as "[addon=ADDON_ID]relative/path" as explained in the previous commit.
This commit adds C++ classes for add-on management, most notably
AddonManager, Addon and AddonVersion. The AddonManager is used to
register add-ons. It relies on an std::map<std::string, AddonRef> to
hold the metadata of each registered add-on (keys of the std::map are
add-on identifiers, and AddonRef is currently SGSharedPtr<Addon>).
Accessor methods are available for:
- retrieving the list of registered or loaded add-ons (terminology
explained in $FG_ROOT/Docs/README.add-ons);
- checking if a particular add-on has already been registered or
loaded;
- for each add-on, obtaining an Addon instance which can be queried
for its name, id, version, base path, the minimum and maximum
FlightGear versions it requires, its base node in the Property Tree,
its order in the load sequence, short and long description strings,
home page, etc.
The most important metadata is made accessible in the Property Tree
under /addons/by-id/<addon-id> and the property
/addons/by-id/<addon-id>/loaded can be checked or listened to, in
order to determine when a particular add-on is loaded. There is also a
Nasal interface to access add-on metadata in a convenient way.
In order to provide this metadata, each add-on must from now on have in
its base directory a file called 'addon-metadata.xml'.
All this is documented in much more detail in
$FG_ROOT/Docs/README.add-ons.
Mailing-list discussion:
https://sourceforge.net/p/flightgear/mailman/message/36146017/
Several checks were off by one, resulting in a segfault when only one
parameter was missing.
Also improve error messages, giving details about what is expected.
Doing the option processing in Options::parseOption() has drawbacks:
- doesn't work well upon reset;
- doesn't work in the built-in launcher Additional Settings box.
Options::processOptions() is invoked both upon reset after the property
tree has been reset, and by the built-in launcher to process options
given in the Additional Settings box. This is not the case of
Options::parseOption() which is better for... parsing. :-)
Also use SGPath::fromLocal8Bit() to decode the path argument of --addon.
Rewrite the position-init code for carrier starts, to precisely wait
on the carrier model being loaded, before proceeding with FDM init.
This allows the FDM to see the correct carrier model in the ground
cache, and hence avoids starting in the water.
To implement this, the CheckSceneryVisitor is used to force the carrier
model to be loaded while the splash-screen is visible.
The bug fix is:
- if (!log.output) {
+ if ( !(*log.output) ) {
(i.e., testing the sg_ofstream instance instead of its address) and then
ensuring that the corresponding Log instance is removed from _logs and
destroyed.
The "destroy" part is made automatic by using std::unique_ptr instead of
raw pointers. This allows to simplify several areas of the code.
Don't provide custom definitions for the constructor and destructor of
FGLogger anymore, now that they don't need to do anything: IIRC, this
allows compilers to do some optimizations according to the C++ standard.
Since the paths of files overwritten by FGLogger come from the property
tree[1], they must be validated before we decide to write to these
files.
[1] Except for the "empty" case, which uses the default name
'fg_log.csv'. This file is deemed acceptable to overwrite in the
current directory, as the name is completely fixed and clearly
FG-specific.
Call fgInitAllowedPaths() right after Options::processOptions() (which,
among other things, determines $FG_ROOT and processes
--allow-nasal-read). This way, fgInitAllowedPaths() can be used in much
more code, such as when initializing subsystems.
using --addon=/foo/bar does
* add /foo/bar/config.xml as propertyfile
* add /foo/bar to aircraft_paths to provide read-access
* sets property /addons/addon[n]/path = "/foo/bar"
* addons get initialized from addons.nas in FGDATA/Nasal
Change fgcommand to take an optional property tree root element.
This fixes the animation bindings to use the defined property tree root - to support multiplayer (or other) model that can bind to the correct part of the property tree.
Requires a corresponding fix in sg to allow the command methods to take an optional root parameter.
What this means is that when inside someone else's multiplayer model (e.g. backseat, or co-pilot), the multipalyer (AI) model will correctly modify properties inside the correct part of the property tree inside (/ai), rather than modifying the properties inside the same part of the tree as the non-ai model.
This means that a properly setup model will operate within it's own space in the property tree; and permit more generic multiplayer code to be written.
This is probably responsible for some of the pollution of the root property tree with MP aircraft properties.
This adds console and message-box warnings, based upon aircraft
declaring the minimum FG version they support. A follow-up commit
will extend the launcher UI to warn the user about this in a nicer
way.
This is a headless mode, designed to be invoked from an installer, not
used directly by users. It doesn’t touch the ‘normal’ installation, but
rather removes the other files FG typically creates or downloads.
When building with MSVC, use the CMAKE_MSVCIDE_RUN_PATH variable to
prepend ${MSVC_3RDPARTY_ROOT}/${MSVC_3RDPARTY_DIR}/bin to the PATH in
order to (hopefully) allow fgrcc to find the libraries it needs. We may
need to add something similar for SimGear---will see.
The use of CMAKE_MSVCIDE_RUN_PATH and other ways to address this problem
are discussed at
<https://stackoverflow.com/questions/28533012/how-to-set-runtime-path-for-cmake-custom-command-on-windows>.
${CMAKE_SOURCE_DIR}/src/EmbeddedResources/FlightGear-resources.xml
(currently empty) is automatically "compiled" into
${CMAKE_BINARY_DIR}/src/EmbeddedResources/FlightGear-resources.[ch]xx by
fgrcc inside the build directory. These files are incorporated into the
FlightGear build (FlightGear-resources.cxx is linked into FlightGear).
When the XML embedded resource declaration file added here,
FlightGear-resources.xml, is compiled, fgrcc is passed the
--root=${CMAKE_SOURCE_DIR} option, so that files referred to in
FlightGear-resources.xml are looked up relatively to the root directory
of the FlightGear repository. One could use a second XML embedded
resource declaration file compiled with a different --root option to
grab files from FGData, for instance. I would name such a file
FGData-resources.xml to be consistent with the current naming scheme.
Note: this --root option applies to the paths of real files. Don't
confuse it with the 'prefix' attribute of <qresource> elements
inside XML resource declaration files (such as
FlightGear-resources.xml), which applies to the virtual path of
each resource defined beneath.
The commands in src/Main/CMakeLists.txt ensure that
FlightGear-resources.xml is recompiled with fgrcc whenever it is
changed, and obviously also when FlightGear-resources.cxx or
FlightGear-resources.hxx is missing. However, CMake doesn't know how to
parse fgrcc XML resource declaration files, therefore when a resource is
modified but the XML file it is declared in is not (here,
FlightGear-resources.xml), you have to trigger yourself a recompilation
of the XML resource declaration file to see the new resource contents
inside FlightGear. The easiest ways to do so are:
- either update the timestamp of the XML resource declaration file;
- or remove one or both of the generated files
(FlightGear-resources.cxx and FlightGear-resources.hxx here).
The EmbeddedResourceManager is created in fgMainInit() just after
Options::processOptions() set the language that was either requested by
the user or obtained from the system (locales). Resources from
FlightGear-resources.cxx are added to it, after which
EmbeddedResourceManager::selectLocale() is called with the user's
preferred locale (obtained with FGLocale::getPreferredLanguage()).
Upon reset (fgStartNewReset()), EmbeddedResourceManager::selectLocale()
is called in a similar way after Options::processOptions(), however in
this case the EmbeddedResourceManager instance doesn't have to be
recreated.
- remove use of boost in src/Main/locale.cxx;
- add missing header <cstring> for std::strlen();
- replace NULL with nullptr;
- fix some broken indentation;
- other small readability improvements.
This function returns the preferred "locale"[1] according to user choice
and/or settings (i.e., it is influenced by --language if passed,
otherwise by current locale/system settings). The return value never has
an encoding part. It is the empty string if nothing could be found,
otherwise should look like fr_BE or it_IT.
[1] "language" term used in the function name for consistency with the
existing and related FGLocale::selectLanguage().
Windows and Mac implementations return a string without any encoding
specifier -> remove this specifier directly in the Unix/Linux
implementation for consistency.
Also do some small refactoring with the new static method
FGLocale::removeEncodingPart(). Slight difference with the previous
algorithm: if a '.' is found in the given locale spec, we assert() that
it is not the first character. The previous code in
FGLocale::findLocaleNode() used to consider such weird locale specs
starting with a dot as normal locale specs without any encoding part.
Note: the same change could be done where FGLocale::findLocaleNode()
looks for an underscore in order to prepare for the fallback
search (e.g., 'fr' after not finding translations for 'fr_FR').
Print an error message and exit if --{enable,disable}-enhanced-lighting
or --adf are used (those deprecated options will be removed in a future
version of FlightGear).
The options.cxx code is not ready to handle recursive use of --config
(for config files). Instead of failing in an ugly way, abort with a
clear error message in such situations. See discussion at
<https://sourceforge.net/p/flightgear/mailman/message/35838852/>.
Note: it *is* possible to load XML PropertyList files from config files,
so --config is not entirely "banned" from config files.
+ add missing include
This has the advantage, according to my testing on Linux, that core
files obtained after a crash now point to the crashing thread again,
when one starts 'gdb' on the core file and runs the 'bt' command.
Apparently, when using kill(), the signal is seen as coming from the
outside and gdb's 'bt' command points to the wrong thread in general
when debugging using a core file (when debugging "live", gdb intercepts
the signal even before FG's signal handler is started).
See discussion starting at
<https://sourceforge.net/p/flightgear/mailman/message/35833221/>.
Before SimGear commit a962c90b30f36575d01162b64471fa77473237a0,
SGPath::pathListSep was a char in static memory that was not necessarily
followed by '\0'. As a consequence, using &SGPath::pathListSep as a
C-style string could result in a string containing the correct separator
*plus* whatever followed in memory until the first null byte...
SimGear commit a962c90b30 changes this situation by making
SGPath::pathListSep an array of two const chars: the path list separator
followed by a '\0'.
This commit simply adapts FlightGear to this change, which fixes a
couple of bugs where the separator was used, mainly unneeded NavCache
rebuilds due to the "apt.dat", "fix.dat" and "nav.dat" properties in the
SQLite database containing the correct paths separated by a possibly
incorrect separator string (there was no alteration of the cache
contents as far as I can tell, since the db property is only used to
check if the lists of apt.dat, fix.dat and nav.dat files have changed).
Code and tests to demonstrate migrating of older auto-save files, with
blacklisting support to exclude properties. Disabled pending agreement
on the required blacklisting values.
Some pieces of code such as fgMainInit() and, by cascading effect,
fgInitHome(), were careful to return a meaningful value indicating
success or error, however the main() function in src/Main/bootstrap.cxx
ignored it royally so far.
main() now returns:
- EXIT_FAILURE if fgMainInit() or fgviewerMain() throws an exception;
- whatever said function returns otherwise.
- Rename fatalMessageBox() to fatalMessageBoxWithoutExit(). This should
prevent the kind of bug that prompted this set of changes: someone
calling fatalMessageBox(), assuming the program would stop at that
point, whereas in reality it did not.
- Add new function fatalMessageBoxThenExit(). This is not vital of
course, but allows one to spare one line here and there and to apply
the DRY principle for such fatal exits.
- Replace every existing call to fatalMessageBox() with one or the other
of the two new functions. Improve formatting along the way. This
fixes a few bugs of the kind explained above.
Basically, this is because fatalMessageBox() is only safe to call from
the GUI thread, however it seems fg_terminate() can be called from any
thread (according to C++11 semantics). Additionally, fatalMessageBox()
typically requires some work to happen in the GUI thread (event loop) in
order to display something, but we can't realistically expect this while
running a terminate handler just before the program dies.
See messages around
<https://sourceforge.net/p/flightgear/mailman/message/35775803/> for a
discussion of this subject.
+ Minor header cleanup (<locale.h> replaced with <clocale>, etc.)
We probably need a warning for cross-aircraft paths, but leaving that
for a separate change since I’m worried it will warn on MP aircraft.
Maybe better checked in the Python scripts than in the app?
Compile a useful subset of FG as a shared library, and add two basic
uses of this to exercise some Flightplan / RoutePath / navaid
functions.
The test framework can/will be expanded incrementally from here, this
is just a starting point.
As part of this, add the ability to distinguish default vs explicit
airport selection via a new /sim/presets/airport-requested flag. This
enables us to more cleanly handle different combinations of startup,
especially the case where the user requests an airport but no runway
(wants auto selection), ensuring we don’t look for the default airport’s
runway (from location-presets.xml) in that case.
- Declare 'datTypeStr' and 'defaultDatFile' as public member variables
of NavDataCache ('defaultDatFile' is not *required* for this commit,
it just seems to make sense to treat both members the same way/keep
them together in the source code).
- New keys under "navigation data" in the JSON report: "fix.dat files"
and "nav.dat files".
Make a single Cmake value to expose the build type to code, and use
this to default a run-time ‘developer-mode’ property, which can be
over-ridden from the command line.
Use this to drive the different warning levels. Policies subject to
review, especially whether nightly builds should default to
developer mode or not.
Uses TTF fonts, and displays more information textually including
the application version and current aircraft.
Also rename FGRenderer::splashinit to preinit, as was suggested
a long time ago.
This change is the logical counterpart of SimGear's change from commit
79f869a7f32910197be72b21f6489fbbba02c836 that moved the following files
from simgear/misc to simgear/io/iostreams:
gzcontainerfile.cxx
gzcontainerfile.hxx
gzfstream.cxx (formerly zfstream.cxx)
gzfstream.hxx (formerly zfstream.hxx)
sgstream.cxx
sgstream.hxx
sgstream_test.cxx
Each argument creates another log file, in the directory named. Symbolic
value ‘desktop’ creates logs on the user’s desktop.
Needs corresponding SimGear commit to build
For unknown reasons this seems to alleviate the word-wrap / min-height
bug on Windows. Committing so we can test and verify this is really
the case before the next release.
Requires FGData commit: 0565eaab10a5d466cd485766b17d1870936a0a57
(which actually renames the file).
Also disables the preferences-load command since I don’t believe it
would actually be safe to reload the defaults without doing a simulator
reset (aircraft -set.xml values would be overwritten, for example)
As discussed on the devel list, only require the major+minor versions
of FG+SG+data to match by default. If we encounter a situation on
a release branch where stronger checks are needed, it’s easy to
restore.
Essentially, adapt two places where options.xml was supposed to be found
in $FG_ROOT (in one of these, the comment was already incorrect way
before the recent change moving options.xml out of FGData).
$FG_INSTALL_PREFIX represents the FlightGear installation prefix, such
as /usr, /usr/local or /opt/FlightGear on Unix systems. Copying the
--help output and translated strings there avoids having to write to
$FG_ROOT when 'make install' (or some OS-dependent equivalent) is run
from the FlightGear build directory---that would be ugly when $FG_ROOT
points to the FGData Git repository.
In FGLocale::FGLocale(), Translations/locale.xml is loaded using
readProperties() and fatalMessageBox() (in case an error is
encountered). Note that it couldn't be loaded via fgLoadProps() in the
current state, because this function relies on guiErrorMessage() when an
error is encountered, which calls mkDialog(), which itself does
globals->get_subsystem("gui"). This last call can't be done from
FGGlobals' constructor---where the 'globals' pointer is still
NULL---hence the need for a different mechanism not relying on
FGGlobals.
For consistency, and also because it provides a better user experience[1],
load options.xml using the same method instead of with fgLoadProps().
[1] I.e., in case of an error, the user gets to see a graphical popup
window with an explanatory message before FG exits, assuming he is
either on Windows, or on Mac, or has Qt support built in FG, as
opposed to only an SG_LOG() call [because when options.xml is
loaded, guiErrorMessage() used by fgLoadProps() can't use the 'gui'
subsystem].
- Add an optional argument to flightgear::initApp(): doInitQSettings.
This argument defaults to true, preserving initApp()'s behavior in
this respect. If this argument is set to false, FGGlobals doesn't have
to be initialized.
- New function flightgear::initQSettings(), called by
flightgear::initApp() when its 'doInitQSettings' argument is true.
This allows initializing the QSettings exactly when it is needed.
- New function flightgear::checkKeyboardModifiersForSettingFGRoot().
The code it contains used to be run from initApp(), which is
undesirable because:
1) initApp() is not only called at FG initialization (fgMainInit()),
but also from QtMessageBox(), from QtFileDialog::exec() and twice
from Options::setupRoot(). However, checking the Alt and Shift
modifiers to set 'fg-root' in QSettings to the special value
"!ask" only makes sense in fgMainInit(), not in these other
places.
2) This code relies on the QSettings to be set up, and therefore on
FGGlobals. Thus, freeing initApp() of its dependency on FGGlobals
requires splitting this keyboard modifiers checking code out of
initApp().
This is likely to fix the problem preventing startup on Windows when the
username contains non-ASCII characters (cf.
<https://forum.flightgear.org/viewtopic.php?f=22&t=31320>). Thanks to
Headhunter76 for the useful report and to wkitty42 for doing the liaison
officer. ;-)
I can't actually test this, because I don't have Windows. Windows users
should report whether this works for them.
Search for the closest ground-net node near but /not/ on, the requested
runway. This works fairly well, although for some airports the selected
node is surprisingly far from the runway.
The report now looks like:
{
"meta": {
"type": "FlightGear JSON report",
"format major version": 1,
"format minor version": 0
},
...
}
When making compatible changes to the format (e.g., adding members to
JSON objects), only the minor version number should be increased.
Increase the major version number when a change is backward-incompatible
(such as the removal, renaming or semantic change of a member). Of
course, incompatible changes (like this one) should only be considered
as a last recourse.
- New methods Options::printJSONReport() and utility method
Options::OptionsPrivate::createJSONArrayFromPathList().
- Small addition to Options::processOptions(), since the --json-report
option must be processed *after* the TerraSync and download dirs, as
well as aircraft and scenery paths, have been finally set.
Apart from providing a public method giving a path to the autosave file,
the main idea of this commit is to reduce redundancy where
globals->get_fg_home() was so far used in every place where the autosave
file is needed or saved. Use an optional argument for
FGGlobals::loadUserSettings() and FGGlobals::saveUserSettings()[1],
since it should be exceptional to access an autosave file in another
location than $FG_HOME.
Also add comments explaining how to avoid security pitfalls with
saveUserSettings() (cf. discussion around
<https://sourceforge.net/p/flightgear/mailman/message/35461636/>).
[1] Argument *added* to this method, for consistency with
FGGlobals::loadUserSettings().
Similar to the existing FGGlobals::get/set_terrasync_dir(), add
FGGlobals::get_download_dir() and FGGlobals::set_download_dir() methods,
and of course the corresponding FGGlobals::download_dir public member
variable. FGGlobals::set_download_dir() stores the realpath() of the
given directory, including into the /sim/paths/download-dir property,
which is marked as read-only just as /sim/terrasync/scenery-dir already
is.
Handle the setup of the TerraSync and download dirs all in the same
place (Options::processOptions()), since most of the work is already
done there. This allows one to get rid of fgOptTerrasyncDir() and
fgOptDownloadDir(), and to make it easier to see that
globals->set_terrasync_dir() (resp. globals->set_download_dir()) is
called on the correct SGPath, regardless of whether --terrasync-dir
(resp. --download-dir) was passed.
Always create the TerraSync and download dirs when they don't already
exist, regardless of whether --terrasync-dir or --download-dir has been
given on the command line.
Add comments explaining how to avoid security pitfalls with download and
TerraSync dirs (cf. discussion around
<https://sourceforge.net/p/flightgear/mailman/message/35461636/>).
Adjust indentation where it was too broken, hampering readbility.
1) Paths and the FG_SCENERY paths list are now printed like:
FG_ROOT=/home/flo/flightgear/src/fgdata
instead of:
FG_ROOT=Path "/home/flo/flightgear/src/fgdata"
Moreover, FG_SCENERY is now correctly printed (without 'Path ""'
wrapping, without Terrain, Objects and markers instead of the actual
scenery paths) regardless of the position of --version relatively to
--fg-scenery, --terrasync-dir, etc. Of course, the values given to
these options do influence the output of --version.
Simplify printing of FG_SCENERY via SGPath::join() and use the
correct, OS-dependent separator between paths, SGPath::pathListSep.
Write the --version output to stdout, as already done for --help;
then it can be easily piped to $PAGER and doesn't get mixed with the
output of SG_LOG (which is on stderr). This is of course backward
incompatible for programs reading the stderr output of
'fgfs --version', but has been agreed upon on FlightGear-devel (cf.
<https://sourceforge.net/p/flightgear/mailman/message/35461619/>).
2) Don't write explicit values in the OptionResult enum: they don't
matter, but giving them is error-prone in case one does a copy-paste
to add a new member to the enum and forgets to change the value.
It is not needed anymore to hardcode the number of lines of
$FG_ROOT/Airports/apt.dat.gz. The new method, which relies on
SGPath::sizeInBytes() and sg_gzifstream::approxOffset(), works as well
for the other dat files.
Add a new NavCache rebuild phase, REBUILD_READING_APT_DAT_FILES, since
the process is now made of two parts.
Rename NavDataCachePrivate::getDatFilesPaths() to
NavDataCachePrivate::findDatFiles(), because it now returns a
DatFilesGroupInfo (new struct) instead of a PathList. For the same
reason, rename NavDataCachePrivate::aptDatPaths to
NavDataCachePrivate::aptDatFilesInfo. Adapt signatures, etc.
This requires up-to-date SimGear and FGData.
Expand existing —-config option to read either property-XML files (as
it previously did) but for non-XML files, to parse them as command
line argument files.
With Simgear commit d7d59b08a2f1a77a4247ec1a89d6ff48ed73f5c7, this
allows terrasync to be initialised from files in the install data,
which avoids downloading them again.
Relocate the start-up position to a plausible hold-short position
when MP is active and a runway start is requested. This does not (yet)
use ground-net data to identify a real hold-short position.
Remove uses of .str(), .c_str() and some other methods of SGPath.
Pass SGPath directly where possible, or explicitly convert to the
appropriate 8-bit encoding.
When set on the command line, will be used for aircraft packages. When
set in the Qt launcher, will also be used for aircraft downloads at
all times.
When changing the path in the launcher, the set of aircraft catalogs
is refresh automatically. Note the default catalog may need to be
re-installed.
The --metar option has no effect unless --disable-real-weather-fetch is
also passed. This often makes users believe that --metar doesn't work.
Change the implementation for --metar so that it automatically implies
--disable-real-weather-fetch.
After removing /Models from FGData loading of shared models from
within a scenery model failed because the ResourceManager did not know
about additional scenery paths.
The problem was that the change to make FGScenery a standard subsystem caused
the particle OSG group to no longer be inserted into the scene graph. The
solution was to convert the particle group to be set up as a standard branch of
the scene graph, alongside the terrain, models, aircraft, and interior branches.
The particle system is now set up as part of the init() subsystem function call,
so it is compatible with the new subsystem design.
This follows from http://thread.gmane.org/gmane.games.flightgear.devel/78650 and
resolves the sign bug https://sourceforge.net/p/flightgear/codetickets/1778/ .
Combined with a matching change to FGData, this changes the HUD formats from the
current set of 3 (note that the text in brackets is not shown in the HUD
preferences PUI dialog, but is show here for reference):
0) Decimal degrees (37.618890N -122.375000W)
1) Degrees, minutes (37*37.133N -122*22.500W)
2) Degrees, minutes, seconds (37*37 08.0 N -122*22 30.0 W)
to (here the text in brackets will be shown in the PUI dialog):
0) DDD format (37.618890N 122.375000W)
1) DMM format (37*37.133'N 122*22.500'W)
2) DMS format (37*37'08.0"N 122*22'30.0"W)
3) Signed DDD format (37.618890 -122.375000)
4) Signed DMM format (37*37.133' -122*22.500')
5) Signed DMS format (37*37'08.0" -122*22'30.0")
6) Zero padded DDD (51.477500N 000.461389W)
7) Zero padded DMM (51*28.650'N 000*27.683'W)
8) Zero padded DMS (51*28'39.0"N 000*27'41.0"W)
9) Trinity House Navigation (51* 28'.650N 000* 27'.683W)
