rabbit lights appear to almost work except the last light or two is never
included in the animation and longer strings of lights are drawn as all
light on ... :-(
a tile boundary. (Potentially imposes a slight performance penalty, but
getting the correct answer needs to be higher priority than getting the
wrong answer really quickly.)
I noticed that textures for scenery static objects are not loaded
anymore for a few weeks. Static objects have absolute path while
random objects and aircraft have relative path but fgLoad3DModel
unconditionally prepend fg_root to the model path. This patch test the
beginning of the model path to choose if fg_root has to be prepended
to the model path.
Ok, I found the problem. You're computing the dynamic pressure in
"psf" and adding it to the static pressure in "inHg" to form the
total pressure. The attached patch is the simple fix to the source.
With that fix, failing the pitot while in cruise at 3k' will cause
the airspeed to indicate beyond redline during climb ... well before 4k'.
Thus, a pitot problem can be detected on any IFR altitude change.
Similarly, failing the static (with working pitot) while cruising 4k'
causes the airspeed to indicate beyond redline during a descent
well before reaching 3k' (during which, of course, the ALT looks fine).
Thus, a static failure can be detected before the aircraft breaks out
of the pilot tolerance range and is blatantly conspicuous soon after.
Now the options can be localized as well. This adds a slight problem for
the --language options, but not that much (worst case, the strings are
loaded twice consuming some more memory). I tried to be as accurate as
posiible when copying the options texts, but there might be some
mostakes left.
This adds supports for a language specific font, defined in locale.xml
I've also moved the fgInitLocale() routine from main.cxx to fg_init.cxx
to prevent an ungly extern definition in options.cxx.
are now working. A runway light is defined by a point and a direction. The
point and direction are combined with the local up vector to create a small
triangle orthogonal to the direction. The two ficticous corners of the
triangle are given an alpha value of zero, the orignal corner is given an
alpha of one. The triangle is drawn in glPolygonMode(GL_FRONT, GL_POINT)
mode which means only the corner points are drawn, and since two have alpha=0
only the original point is drawn. This is a long way to go to draw a point,
but it ensures that the point is only visible within 90 degrees of the light
direction, behind the light it is not visible. This is still a long way
to get to drawing a point, but we use an environement map, with the direction
vector as the normal to mimic a light that is brightest when viewed head
on and dimmest when viewed perpendicularly or disappears when viewed from
behind.
- warning, there is a bug in how the current runway light direction vector
is calculated which will adversely effect runway lighting. The airports
should be regenerated in order to fix this problem.
The FGGlobals constructor does not initialise the locale pointer.
Under MSVC, uninitialized pointer have a value of 0xcdcdcdcd, not
0, so a test in mainLoop fails and the program segfault.
This patch set un initial value to locale.
This patch fixes some bugs for correctly reporting un-updated
configuration files, and adds support for a --language=<code>
commandline option, overriding the language specified by the OS.
KEMT (w120n30 scenery), and you will have to set the property
/sim/ai-traffic/enabled to 'true' to see the other plane (and tune
comm1 to 121.2 to hear the other plane's radio calls).
For sounds that play while a value is in transit, use time rather than
the number of frames to judge when to halt the sound because it will be much
more reliable on high performance systems. It currently waits 10 ms.
before stopping the sound, but you might want to fiddle it a little by
changing MAX_TRANSIT_TIME defined int fg_sound.hxx
really see anything different in the day, but as day turns to night the
panel smoothly darkens and the lighting component becomes visible.
Lights are wired to electrical system so if you kill power, you lose the
lights.
The code reads the electrical system config and contructs an internal model.
Nothing is done beyond that yet ... the electrical system is not updated,
nor is it connected to the property system in anyway.
fgLoad3DModel() throws an exception if it fails to load the requested model.
This causes FGTileMgr::update(...) to exit. So I've added a try/catch block
to catch the exception and display an error message instead.
jump whenever you cross a tile, but there are currently a lot of other
positioning problems as well, so this doesn't really detract too much and
means you can play with 3d clouds from just about any starting point.
A bug lurked into our uiuc code.
There are two changes:
[1] Comment out the chunk of code as shown (compare w/ the old)
[2] Put back in the function call, and in that code change AlphaTail to Alpha.
Use getDisplayName instead of duplicated code: gives a better
decision on whether to display the index.
Replace unnecessary node lookups by name with direct access: tidier
and more efficient. E.g. "getValueTypeString
(node->getNode(name.c_str()))" -> "getValueTypeString (child)".
When the scroll bar slider is dragged, the list scrolls only far
enough to see all items; only the arrow buttons can scroll it so far
that the last item goes to the top of the view.
Fix scroll bar proportional size: was wrong when the list was only
a little longer than the visible area.
Minor fixes such as "delete files[i];" -> "delete[] files[i];"
(where the item being deleted is an array of characters) and removal of
global variables.
Smooth scrolling when dragging the slider: one item at a time,
rather than one tenth of the list at a time.
Fix a bug that would have occurred if instantiated with arrows=2.
Sort properties primarily by name and then by numerical index
order, rather than a simple ASCII string order. E.g. "js[1]", "js[2]",
"js[10]" rather than "js[1]", "js[10]", "js[2]".
Avoid crashing if the selected property path does not exist;
display an empty list instead. This cannot happen when the property
picker is working properly, but did happen due to missing indices prior
to this patch, and could happen if the user is allowed to type a
pathname, as in the http and telnet interfaces.
Fix truncation of strings to PUSTRING_MAX: was wrong when string
length was exactly 80.
Fix: move the scroll bar to the top each time a new list is
displayed. It was left at its previous position, while the top of the
new list was displayed, not corresponding to the slider.
Use getDisplayName instead of duplicated code: gives a better
decision on whether to display the index, and avoids invalid property
paths being generated which would previously crash find_props().
Replace unnecessary node lookups by name with direct access: tidier
and more efficient. E.g. "getValueTypeString
(node->getNode(name.c_str()))" -> "getValueTypeString (child)".
speedups to uiuc_menu.cpp.
(Note these were originally submitted before the cutoff date for new
features, but something was corrupted in the transfer so I granted a bit
of leeway in the schedule.)
I removed some pending random code and I also fixed a
small cosmetic glitch where dt_play was cleared before it was printed.
Curt: Erik changed the sound update intervale and I further I tweaked it.
The issue is that if we put too much into the sound buffer, then we can't react
quick enough to sounds like tire squeek that need to be synced with the visuals
and the action. We put too little into the sound buffer and we risk the
audio dropping out for moment if a frame takes longer to draw than the amount
of audio in the buffer.
I've modified the code to display a brief help message instead of the
whole bunch of options. To get the complete message -v or --verbose has
to be added to the command line.
Here is a FGIO class derived from FGSubsystem that replaces the fgIOInit()
and fgIOProcess() functions. The FGIO::update(double delta) doesn't use the
delta argument yet. I suspect it could be used as a replacement for the
calculated interval value but I'm not familiar enough with that piece of code
just yet.
I've also added two "command properties" to fg_commands.cxx that select the
next or previous view. Writing any value to these properties triggers the
corresponding action. As an example I modified my keyboard.xml:
<key n="118">
<name>v</name>
<desc>Next view</desc>
<binding>
<command>property-assign</command>
<property>/command/view/next</property>
<value type="bool">true</value>
</binding>
</key>
<key n="86">
<name>V</name>
<desc>Prev view</desc>
<binding>
<command>property-assign</command>
<property>/command/view/prev</property>
<value type="bool">true</value>
</binding>
</key>
And of course these actions can also be triggered from external scripts via
the props server.
- Removed some old cruft.
- Removed some support for older versions of automake which technically was
correct, but caused the newer automakes to squawk warnings during an
initial sanity check (which isn't done very intelligently.)
NOTE: this fix is technically not correct for older version of automake.
These older version use the variable "INCLUDES" internally and could have
them already set to an important value. That is why we were appending
our values to them. However, newer versions of automake don't set this
value themselves so it is an error to append to a non-existant variable.
We seem to "get away" with overwriting the value on older versions of
automake, but if you have problems, consider upgrading to at least
automake-1.5.
Here are some changes that gave me a significant frame rate increase of about 10 fps with random objects disabled. The interesting thing is that these changes aren't in the main loop but are in tile loader. My guess is that I've reduced the memory footprint just enough to reduce CPU cache misses, though I have no hard evidence of this.
Initially I modified all SGBinObject member functions to pass/return by reference instead of by-value. This gives little or no speed up but allows for some optimizations in fgBinObjLoad(). It is these changes that reduce the number of memory allocations. Needless copying of vectors, and vectors of vectors, can be very memory intensive, especially if they are large.
Anyway I would be interested to see if you get similar results. I would emphasize that the frame rate increase only occurs with random objects disabled. I lose about 10-15 fps on my GF2MX 32MB with random objects, probably a fill-rate limitation or texture memory thing.
* Finally I think I have the partial ssg tree deletion routine working correctly
after I managed to break it (and other confusion in the code cause it to
never be called so I didn't notice the problem.)
* Converted several SG_INFO statements to SG_DEBUG to clean up some
extraneous console output.
* This *should* conclude my investigation into a massive memory leak. :-)
Animations are now contained within the scene graph itself and are
updated whenever the graph is traversed -- that saves time by not
updating animations not currently in sight, and it allows animations
to be used for static objects and random objects as well.
Added new FGModelLoader and FGTextureLoader classes. These are intern
tables for models, to guarantee (mostly) that no model is loaded more
than once. FGTextureLoader is not yet used anywhere, but
FGModelLoader is now in place everywhere that ssgLoad* used to be
used (thus adding the ability to use animations).
In the future, FGModelLoader will add some interesting functionality,
including the ability to reload 3D models on the fly.
I've merged FGProps and FGTelnet so there is just a single property server.
I've left in the --telnet=port# command line option but it could be removed
if we wanted to. The command line accepts two forms of the --props option.
The original (--props=medium,dir,hz,host,port#,style) and the shorter
--props=port#. If you accept this change then src/Network/telnet.[ch]xx
can be removed from the cvs repository.
Your 3D models cause a stackdump when the base is separate from the
root. I've attached a patched newmat.cxx - you may want to test it
before committing!
I changed the code such that textures terrain also takes ambient,
diffuse, specular and emissive from the materials.xml file.
[note from dpm: doesn't seem to work yet]
When the scroll bar slider is dragged, the list scrolls only far enough to see all items; only the arrow buttons can scroll it so far that the last item goes to the top of the view.
Fix scroll bar proportional size: was wrong when the list was only a little longer than the visible area.
Minor fixes such as "delete files[i];" -> "delete[] files[i];" (where the item being deleted is an array of characters) and removal of global variables.
Smooth scrolling when dragging the slider: one item at a time, rather than one tenth of the list at a time.
Fix a bug that would have occurred if instantiated with arrows=2.
Sort properties primarily by name and then by numerical index order, rather than a simple ASCII string order. E.g. "js[1]", "js[2]", "js[10]" rather than "js[1]", "js[10]", "js[2]".
Avoid crashing if the selected property path does not exist; display an empty list instead. This cannot happen when the property picker is working properly, but did happen due to missing indices prior to this patch, and could happen if the user is allowed to type a pathname, as in the http and telnet interfaces.
Fix truncation of strings to PUSTRING_MAX: was wrong when string length was exactly 80.
Fix: move the scroll bar to the top each time a new list is displayed. It was left at its previous position, while the top of the new list was displayed, not corresponding to the slider.
Use getDisplayName instead of duplicated code: gives a better decision on whether to display the index, and avoids invalid property paths being generated which would previously crash find_props().
Replace unnecessary node lookups by name with direct access: tidier and more efficient. E.g. "getValueTypeString (node->getNode(name.c_str()))" -> "getValueTypeString (child)".
name "random-objects".
Put the random objects for each tile inside a top-level
ssgRangeSelector with a maximum range of 20km. This saves a lot of
range tests for distant tiles, and gives about a 10% framerate boost
on my card at 1000ft AGL (possibly more on faster cards).
