a single apt.dat.gz file which is in the native X-Plane format.
To do this I wrote a front end loader than builds the airport and runway
list. Some of the changes I needed to make had a cascading effect, so there
are minor naming changes scattered throughout the code.
I've finished the emigration of the radiostack, and I've also removed it
completely. It turned out that the comm radio is completely implemented in
the ATC subsystem. I've changed the affected ATC files to point
to /instrumentation/com, but I guess that the maintainer of the ATC code
should decide wether to make it configureable, and how.
I also had to change some files in Network and Main. The changes in network
should be obvious, but the changes in Main were a bit suspect. The files
included radiostack.hxx, but they weren't directly depending on
radiostack-hxx. They were depending on other files that were included by
radiostack.hxx. I got it to compile, but I'm not sure if I included the
correct directly depending file.
For the data directory I changed every occurrence of /radios/
with /instrumentation/ with this simple one-liner that I found on the net:
find -name '*.xml' -type f | xargs perl -pi -e
's/\/radios\//\/instrumentation\//g'
Instead of me sending all the files that got changed by this I suggest that
you execute the one-liner yourself. Of course I can not guarantee that this
will work perfectly, but I considered hand editing to be not an option (I'm
lazy). I don't want to test every aircraft to see if everything still works,
I think it's better to wait and see if anyone complaints about broken nav
radios/instruments.
I understand that the new hud/runway feature is still very experimental,
and that the search criteria for the active runway don't necessarily make
much sense. (We are searching for a runway on /sim/presets/airport-id
that matches the current wind direction best, and not the tuned in ILS
runway or something!)
Anyway: the new hud code completely denies the possibility of
globals->get_runways()->search() not finding a runway and returning false.
There's always a runway found at KSFO, but not so at e.g. LOXL, in which
case we are handing garbage over to sg_geodesy.cxx and find ourselves
caught in an endless loop in geo_direct_wgs_84().
directory and over to the Instrumentation directory and make them modular
in the sense of being able to pick and choose what you include with any
particular aircraft.
Aaron says:
I just got the virtual runway hud projection working on all views and
2D & 3D HUDs. It is working awesome(see below). I have attached every
file that was modified (hud.hxx, hud.cxx, and the default.xml for the hud)
and every file that was added (hud_rwy.cxx and runwayinstr.xml).
Just a quick overview of how the instrument works.
The virtual runway is projected by getting the "cockpit view" of the
runway in 3D and projecting the points on to the 2D HUD. Therefore, the
virtual runway will be displayed the same in every view. For example,
you can land an aircraft from the "Tower View" by flying the HUD. Also
if you're in "Cockpit View" and it is centered then the virtual runway
lines will perfectly outline the actual runway. I am getting the active
runway via the wind like done in the ATC classes, which may need changed.
Also, I made the assumption the view 0, in view manager, is always the
cockpit view, which may need changed as well.
The runway configuration file will allow you to specify a center offset
(x,y) and a bounding box (width,height). You can also configure the line
stipple pattern for the outside and the center line. For instance, if
you wanted a 0xFAFA pattern, then specify 64250 as the value. If you
want a solid line, you can specify -1 or 65535 (0xFFFF) and zero will
turn the line off. It also draws a runway indication arrow when the
runway is not in the HUD or it can be drawn all the time if arrow_always
is true. The arrow will point in the direction of the runway (2D) by
rotating around the center at a radius of arrow_radius. If you wish to
turn the arrow off, you must set the arrow_scale <=0. The arrow really
should be 3D arrow that points to the runway (or points in the direction
of the aircraft-to-runway vector).
compilation without ENABLE_SP_FMDS defined gave me a lot of link errors. It appeared that symbol used by ADA was still in use in the HUD.
There is also a typo from Curt in instrument_mgr.cxx where he #include "kr_87.cxx" instead of "kr_87.hxx"
All necessary elements for an ADF gauge had been migrated from
Cockpit/kr_87.cxx to Instrumentation/adf.cxx. Migrating the sound
related elements was apparently planned, but not done yet. This
intermediate state broke the ident morse sound: it couldn't get
turned off and it always indicated "SF", regardless of the tuned-in
frequency. The following patches continue the migration:
adf-radio.diff => Base/Aircraft/Instruments/adf-radio.xml:
---------------------------------------------------------------
* sets maximum volume to 1 (rather than 2); Not only is 1
loud enough (and 2 unpleasantly noisy), it also prevents
the knob from being turned to non-existant positions. :-)
* fixes wrong use of /instrumentation/adf/ident
* the voice/ident selector(?) remains unchanged, but as it's
not switched to "IDENT", there'll be no ident sound by default
this is consistent with other sounds and DME.
radiostack.diff => src/Cockpit/radiostack.[ch]xx:
---------------------------------------------------------------
* comment out use of FGKR_87 class. kr_87.[ch]xx is now no
longer used. kr-87adf.xml would no longer work, either, but
isn't used anywhere, anyway. Future adf radios have to use
the adf instrument, using xml/Nasal for specific hardware
implementation details.
adf.diff => src/Instrumentation/adf.[ch]xx:
---------------------------------------------------------------
* adds ident morse sound capability using two new input
properties:
- /instrumentation/adf/volume-norm (double)
- /instrumentation/adf/ident-audible (bool)
will delay it's reply by 50ms. The ground station can change it's reply delay
to trick the airborn dme unit into reporting a distance that is offset from
the true distance by some constant value. In FG we model this by subtracting
a fixed distance from the actual distance.
It is thus possible in our implimentation for the displayed distance to become
negative. This patch clamp DME distance to a minimum value of 0.00 so it can
never go negative.
A good elevation is critical for proper glide slope modeling. This patch
assigns the average field elevation to any ILS component that doesn't have
a valid elevation.
Also, for an ILS approach, use the GS transmitter elevation for glide slope
calculations rather than the localizer elevation, in some cases this can
make a big difference.
- FG now directly supports Robin's native nav database file format.
- His latest data now separates out dme, gs, loc, and marker beacon
transmitters rather than lumping them all into a single "ILS" record.
- These new data structure changes prompted me to do some code restructuring
so that internally these different types of navaids are all kept as
separate lists and searched and handled separately.
- This structural change had a cascading affect on any code that
references or uses the nav databases. I've gone and "touched" a lot of
nav related code in a lot of places.
- As an added bonus, the new data (and code) adds DME bias so these will
all now read as they do in real life.
- Added Navaids/navdb.cxx and Navaids/navdb.hxx which provide a front
end loaders for the nav data.
- Added Navaids/navrecord.hxx which is a new "generic" nav data record.
- Removed Navaids/ils.hxx, Navaids/ilslist.cxx, Navaids/ilslist.hxx,
Navaids/mkrbeacons.cxx, and Navaids/mkrbeacons.hxx which are all now
depricated.
Add FGPredictor class to xmlauto. Add support for horizontal navigation based
on flight track as opposed to heading. Add crosstrack-error support to nav.
Simplify error adjust calculation for horizontal nav (better interception).
Fixed potential divide by zero that was producing nan issues in the xmlauto
code.
