Fixed c172p and pa28-161. Zlin50 has not been fixed, but appears to have the same issue.
Clean-up of the KAP140s required - none use the Instruments-3D version of the model!
The generic-autopilot-helper computes heading-bug-error from
magnetic heading, not indicated heading. This patch corrects
this by pulling the two used generic helper filters into our
own config (so the generic-ap-helper.xml can go away).
2. Corrected c172p nav0 and nav1 cdi and gs needle animations by adding generic-autopilot-helper.xml per Torsten's hint.
3. Changed main gear compression animation computation from nasal to interpolation xml.
removed action-sim.nas
+ nose gear scissor animation computation now via interpolation xml
+ main gear rotation due to compression now via interpolation xml
+ moved NAV0 and NAV1 needle deflection filters to pseudo-autopilot xml
+ moved pannel and instrument lights control to light.nas
+ the remaining tank setlisteners are now in tank.nas
pa24-250 updates
+ landing light animation now modeled after pa22 landing lights
- Change DME to use local files rather than the pa24-250
- Create new yokes as separate model files
- Improve throttle, mixture and carb heat controls
- add scrollwheel support for throttle, mixture
- Use separate Cessna flaps indicator model.
This patch adds main gear rotations about the fuselage attach points that keep the wheels in contact with the ground as the compression increases and decreases. I also rotated the main fairings and wheels 4 degrees so the wheel axles are horizontal sitting on the ground. The left and right main gear struts, wheels, and fairings were adjusted to be mirrored (symetric) in the c172p.ac. I also increased the rpm boundary between the Propeller and Propeller.slow selects.
The attached patch adds "Hide yoke" to the c172p menu, adjusts the gear spring forces and damping to cause a more tail low attitude sitting on the ground, optimizes vertices and surfaces in c172p.ac, as well as cleaning up the tabs and indents in several xml files.
Patch goals:
1. Implement instrument and pannel lights controled by the nav-light switch.
2. Use Instruments-3d/vor which includes GS flag and filters for smooth movement of cdi and gs needles to and from parked position.
3. Adjust model and pilot view per the agreed to changes in Re: [Flightgear-devel] c172p pitch at cruise question, 12/06/2008 02:27 PM. These changes were never committed.
This is what currently is done in flightgears model loading stage anyway.
Modified Files:
Instruments/dme/dme.xml Instruments/kr87-adf/ki227_228.ac
Models/c172p.ac
-new better panel
-added lights and made them switchable
-doors can be open now (pick animation)
-added some liveries by Brett Harrison
-added paintkit by Brett Harrison
-converted liveries to png
-replaced radio stack with 3d-radios, DME and marker-lights yet missing
-minor bugfixes
-added glass shader with fresnel effect
still work on the interior to do like the seats, walls and so on...
-new better panel
-added lights and made them switchable
-doors can be open now (pick animation)
-added some liveries by Brett Harrison
-added paintkit by Brett Harrison
-converted liveries to png
-replaced radio stack with 3d-radios, DME and marker-lights yet missing
-minor bugfixes
-added glass shader with fresnel effect
still work on the interior to do like the seats, walls and so on...
A big step at bringing the default aircraft into the state it actually
deserves.
Features:
- new, accurate exterior modell, modelled with original 3-views by Cessna
- textures with shadow shading
- livery changing sytem over mp
- immatriculation over mp
- glass shader with fresnel effect
- nearly complete 3d-panel
Known Bugs:
- Radio_Stack shines through the fuselage. New 3d radio_stack has yet to be done.
To-Do:
- Suction-Instrument
- Interior with much more details and painting
- Radio_stack
- doors openable
- lights
- fully animation of the gear
- failure system by Erobo
This is a patch to the c172p fdm to add pointmasses for all four
occupant positions and baggage. The X locations were taken from the
c172 type certificate 3A12 dated September 15, 1998. As the new
pointmasses have a weight of 0 they will not affect the current model,
however we are extending the FlightGear weight and balance dialog for
JSBSim and the pointmasses have to be defined.
- Automatic pitch trim (use autopilot/KAP140/settings/auto-pitch-trim to turn
on/off)
- Aural altitude alerter. Uses the same sound file as the stall warning.
- Replace custom flasher routines with nasal aircraft.light objects.
- Cleanup.
Changes:
1. remove typo from all the /Systems/KAP140.xml files
2. changes to put radio_stack in Instruments-3d
3. Add "pick" to vor, alt, hi, in Instruments-3d
4. changes to pa24-250 and pa28-161 to use 2 and 3.
5. add "pick" and "2d text in window" in 3d OAT in pa24-250
"This patch allows all the AC using the kap140 to use one kap140.nas
which includes Roy's move to "bool" values as well as the check for
power used by the pa24-250." (dp)
I put 3 patches and a sound file in this tar. The c172p... patch
removes an unnecessary patch I submitted to the c172p. It has no affect
on performance. The Instruments-3d... patch adds a working skid ball to
the tc and switches the vor xmls to using params so it is easier to
edit. It also constrains the glide-slope needle to -32 to 32 degrees.
The pa24-250... patch fixes an edit error (corrects a misnamed switch
"click", no change in performance) and adds a "squish" sound to the
primer pump action.
feature I added to the navcom-kx155.xml and the dme.xml in the
Instruments folder. I wanted to leave the frequencies, etc. on these
dark until there was voltage applied to
/systems/electrical/outputs/nav. This was accomplished by adding a
param and property alias pointing to the appropriate value. Since the
c172p "always" applies 28 volts, this made no change in the c172p, but
allowed me to model the avionics master and battery master realisticly
in pa24-electrical.nas. I put in comments explaining this at the change
points.
There is a useful "help > aircraft help" that walks you through the
start procedure and lists the key bindings as well as the key to "light
up" the hot spots.
Implement simple help system with global and aircraft specific dialogs:
The gui.nas changes have been discussed with Andy. All ac have a help dialog,
but some are empty. (This wouldn't have been necessary, as the system falls
back to the "Common Aircraft Keys" if an aircraft has no help defined, but an
empty dialog is less confusing and encourages to be filled with interesting
information. :-) I scanned all aircraft files for interesting performance
data and added some to the dialogs (stall speed, etc.) The Concorde and the
p51d have (over?)complete dialogs and can serve as examples. The format is
documented in $FG_ROOT/Nasa/gui.nas.
There is also a couple of other, minor fixes.
The following files have ugly MSDOS line endings:
$FG_ROOT/Aircraft/Hunter/hunter{-2tanks,}-set.xml
$FG_ROOT/Aircraft/A380/A380-set.xml
The Concorde-jsbsim.nas file is a useless copy of the real */nas file, which is
in Nasal/. I'was debugging the Concorde and wondered why changes to this file
had no effect ...
(Fixed Concorde in the help-ac.diff patch: don't use "interpol" keyword as
variable.)
Changes made 19/12/2004
Panel re-oriented
3d Compass shows through windows.
Wing-tips slightly altered.
Changes made 18/12/2004
Prop spinner shortened and widened
Nose area slightly remodelled to fit silouette
Nose texture altered to place lower intake correctly
Nose wheel reduced in size.
Nose leg Oleo guide added (does not rotate - is this correct with real ac?)
Nose wheel Axle added.
Nose wheel fixed to rotate about it's shaft axis.
Windscreen / panel mesh changed so that panel no longer protrudes thru dash
Panel instruments moved to represent the geometries of the real cockpit.
Pilot / Copilot Yokes moved inboard to represent the geometries of the real cockpit.
Alpha layer added to interior texture to prevent panel showing through seats / yokes.
Interior texture duplicated and mapped to panel only to allow panel to show.
Front seats moved slightly inboard.
Landing light pair added to port wing texture.
Alpah layer added to wing texture to prevent panel showing through.
Texture remapped to Flaps (no shows ribs again).
Wing strut outer joins brought inboard to point of wing taper to match real aircraft geometries.
Wing struts thinned in front profile and thickened in side profile.
VHF aerials moved aft to their usual position.
Maingear legs altered so they now join with the fusealage (previously, 20cm gap)
Rear window altered slightly to match silouette.
Rear (white) Navigation Light made to translate with the rudder.
Not yet done: independant landing and taxi lights on port wing
I've finished the emigration of the radiostack, and I've also removed it
completely. It turned out that the comm radio is completely implemented in
the ATC subsystem. I've changed the affected ATC files to point
to /instrumentation/com, but I guess that the maintainer of the ATC code
should decide wether to make it configureable, and how.
I also had to change some files in Network and Main. The changes in network
should be obvious, but the changes in Main were a bit suspect. The files
included radiostack.hxx, but they weren't directly depending on
radiostack-hxx. They were depending on other files that were included by
radiostack.hxx. I got it to compile, but I'm not sure if I included the
correct directly depending file.
For the data directory I changed every occurrence of /radios/
with /instrumentation/ with this simple one-liner that I found on the net:
find -name '*.xml' -type f | xargs perl -pi -e
's/\/radios\//\/instrumentation\//g'
Instead of me sending all the files that got changed by this I suggest that
you execute the one-liner yourself. Of course I can not guarantee that this
will work perfectly, but I considered hand editing to be not an option (I'm
lazy). I don't want to test every aircraft to see if everything still works,
I think it's better to wait and see if anyone complaints about broken nav
radios/instruments.
Here are some updates to the KAP140 autopilot in the default c172. It now uses
ailerons and elevator instead of aileron-trim and elevator-trim. I've started
to "upgrade" it to the "two axis altitude preselect" version. Vertical speed
select rounds to nearest 100 fpm.
I've also modified the c172 electrical configuration to turn on the gps
instrument.
Perhaps the most important change is that the nasal script for the KAP140 has
moved from data/Nasal to the c172p aircraft subdir. So it is important that
you delete data/Nasal/kap140.nas. Having the kap140.nas script as a global
script was not a good solution. Now it is aircraft specific, and thus
included in the c172p-set.xml file. Ideally I would like it to be instrument
specific, so that it would be included whenever the KAP140*.xml instruments
where included on the panel.
Here is the KAP140 Two Axis Autopilot update.
I think it's fairly complete now, all the modes are working. I tested the
localizer and glideslope hold and it was pretty stable all the way down to
the middle marker.
In the pilot guide for backcourse hold (REV) mode it says to reset the heading
bug to the _front course_. I haven't figured out how to implement this so for
the time beeing one should reset the heading bug to the _backcourse_. Apart
from this the panel should operate identical to the way the pilot guide
describes.
Here is the KAP140 Two Axis Autopilot.
Aircraft/Instruments/KAP140TwoAxis.xml
Is of course the instrument config file.
Aircraft/Instruments/Textures/KAP140.rgb
The texture.
Nasal/kap140.nas
Most of the work is done here. Without Nasal I don't see how I could implement
the NAV-ARM modes and the flashing annunciators.
Aircraft/c172p/Systems/KAP140.xml
The autopilot PID controllers configuration file. Maybe this file should be in
a more accessible directory and not hidden deep inside c172p!?
I've also attached the changes to the default C172 to include this autopilot
in the 3d-cockpit panel and the 2d vfr panel. Or at least I hope that I've
managed to include all that is needed.
I added some more hotspots to Davids c172p since he already had done all the animation. Also I tried making the throttle and mixture knobs into hotspots even when they are moving adding extra hotspots for them. Also you can click on the trim wheel to trim now.
I added a directory for the labels for the white toggle switches, but there is probably better way to do the labels then I came up with. There is a short readme file which gives the path for the new directory.
