This is a new improved patch for the previous tile manager fixes.
Rather than building dependencies between FGlocation or the viewer or fdm with
tilemgr what I ended up doing was linking the pieces together in the Mainloop
in main.cxx. You'll see what I mean...it's been commented fairly well. More
than likely we should move that chunk somewhere...just not sure where yet.
The changes seem clean now. As I get more ideas there could be some further
improvement in organizing the update in tilemgr. You'll note that I left an
override in there for the tilemgr::update() function to preserve earlier
functionality if someone needs it (e.g. usage independent of an fdm or
viewer), not to mention there are a few places in flightgear that call it
directly that have not been changed to the new interface (and may not need to be).
The code has been optimized to avoid duplicate traversals and seems to run
generally quite well. Note that there can be a short delay reloading tiles
that have been dropped from static views. We could call the tile scheduler on
a view switch, but it's not a big deal and at the moment I'd like to get this
in so people can try it and comment on it as it is.
Everything has been resycned with CVS tonight and I've included the
description submitted earlier (below).
Best,
Jim
Changes synced with CVS approx 20:30EDT 2002-05-09 (after this evenings updates).
Files:
http://www.spiderbark.com/fgfs/viewer-update-20020516.tar.gz
or
http://www.spiderbark.com/fgfs/viewer-update-20020516.diffs.gz
Description:
In a nutshell, these patches begin to take what was one value for ground
elevation and calculate ground elevation values seperately for the FDM and the
viewer (eye position). Several outstanding view related bugs have been fixed.
With the introduction of the new viewer code a lot of that Flight Gear code
broke related to use of a global variable called "scenery.cur_elev".
Therefore the ground_elevation and other associated items (like the current
tile bucket) is maintained per FDM instance and per View. Each of these has a
"point" or location that can be identified. See changes to FGLocation class
and main.cxx.
Most of the problems related to the new viewer in terms of sky, ground and
runway lights, and tower views are fixed.
There are four minor problems remaining. 1) The sun/moon spins when you pan
the "lookat" tower view only (view #3). 2) Under stress (esp. magic carpet
full speed with max visibility), there is a memory leak in the tile caching
that was not introduced with these changes. 3) I have not tested these
changes or made corrections to the ADA or External FDM interfaces. 4) The
change view function doesn't call the time/light update (not a problem unless
a tower is very far away).
Details:
FDM/flight.cxx, flight.hxx - FGInterface ties to FGAircraftModel so that it's
location data can be accessed for runway (ground elevation under aircraft)
elevation.
FDM/larsim.cxx, larcsim.hxx - gets runway elevation from FGInterface now.
Commented out function that is causing a namespace conflict, hasn't been
called with recent code anyway.
FDM/JSBSim/JSBSim.cxx, YASim/YASim.cxx - gets runway elevation from
FGInterface now.
Scenery/newcache.cxx, newcache.hxx - changed caching scheme to time based
(oldest tiles discard).
Scenery/tileentry.cxx, tileentry.hxx - added place to record time, changed
rendering to reference viewer altitude in order to fix a problem with ground
and runway lights.
Scenery/tilemgr.cxx, tilemgr.hxx - Modified update() to accept values for
multiple locations. Refresh function added in order to periodically make
the tiles current for a non-moving view (like a tower).
Main/fg_init.cxx - register event for making tiles current in a non-moving
view (like a tower).
Main/location.hxx - added support for current ground elevation data.
Main/main.cxx - added second tilemgr call for fdm, fixed places where viewer
position data was required for correct sky rendering.
Main/options.cxx - fixed segfault reported by Curtis when using --view-offset
command line parameter.
Main/viewer.cxx, viewer.hxx - removed fudging of view position. Fixed numerous
bugs that were causing eye and target values to get mixed up.
Removed configuration option --with-new-environment and
FG_NEW_ENVIRONMENT macro.
Added configuration option --with-weathercm and FG_WEATHERCM macro.
FGEnvironment is now the default; use --with-weathercm to get the old
weather.
I have finished working the bugs out of my "Enhanced" version of the Magic
Carpet FDM. The UFO FDM works the same as the Magic Carpet with the
following exceptions:
The aircraft's pitch is determined by the Elevator setting (with a pitch
rate of 45 degrees per second).
Climb is forward velocity * sin(pitch)
Speed is forward velocity * soc(pitch)
Roll is tied to the aileron (again, with a roll rate of 45 degrees per
second)
Turn rate is sin(roll) * 45 degrees.
Yes, this does mean that turning is quite a bit more sluggish than
climbing.
If you are wondering why a UFO FDM, it is because it's best that I not
replace the existing magic carpet and this FDM does behave like a UFO (it
hovers, can spin and pitch while hovering, and does not obey the laws of
physics ;)
Minor fixes. Made some changes to get lighting correct for time of day
for now. MSVC compatibility fix and returned to clearing z-buffer only in
LOOKFROM (formerly pilot view).
[dpm: removed the last one, since I had already made a similar patch]
Here are the Boost-less FGEventMgr updates I promised.
Removed Boost dependencies from FGEventMgr.
Removed Boost configure check.
fgMethodCallback now handles const member functions.
I've successfully tested these changes with gcc and msvc.
Synced to CVS 19:36 EDT 2002-04-10 (after this evenings JSMsim and Base
package updates).
Description:
Added FGLocation class which is new home for calculating matrix rotations.
Viewer can now be configured to access rotations created by the model rather
than repeating the same calculations again.
Changed model initialization for the time being so that its location data is
available for the viewer (currently required by other subsystems). At some
point we can move this back to fg_init along with the viewer initialization.
Seperated the update from the draw function in the model code. The viewer
code needs the same matrix data, and moving the update portion at this time
does not increase the number of matrix math iterations.
Moved the model draw so that it always appears "in front" of lights and clouds.
Reogranized viewer update routine for using the FGLocation class and
simplified some more tasks. The routine is fairly easy to follow now, with
the steps ordered and spelled out in comments.
Viewmgr only updates the current (visible) view now, with the exception of an
old reference to "chase view" that will be corrected in forthcoming changes.
Also will be doing some work on the viewmgr outputs.
Model is now clears the z-buffer in all modes. This will be changed with the
next viewmgr update. The only side effect is that models always disappear
when over 5km distant from the eye point (can't really see them anyway:-)).
Other than a flag to indicate "internal" view I don't anticipate the
configuration interface for viewmgr/views will be changed a lot for now. It
is close to done. The next viewmgr update will however rework the outputs so
may change location.
This code will run with the previous version of preferences.xml, but will run
faster with the newer version. I am attaching a preferences.xml that should
not be commited before the code. All the changes are in the /sim/view section
and should show a simpler view configuration that references model locations.
Note that I've added a 2nd tower view in "lookfrom" mode for illustration
purposes. You can look around using the mouse. You may want to remove that or
comment it out.
Minor patches to initial tower view code. Added calculation for "tower" at
any airport, placed a couple fractions of a degree off the center. Moved the
farplane from 100m to 5km so that "lookfrom" mode can see the model. 5km is
still in a reasonable range for a depth buffer. Note that looking at a model
anything but a small distance will cause some problems on older cards.
Temporarily changed viewer to always report elevation/lon/lat of the aircraft
in order to avoid a problem with the ground trim getting recalculated when
tower and aircraft are on different tiles.
radiostack.cxx, fg_init.cxx and main.cxx. If these changes are accepted
then you can remove Time/event.[ch]xx and Include/fg_callback.hxx from
the repository.
case logging is disabled). This way, when people specify a
non-existant aircraft or have an error in a custom XML file, they'll
get an error report, at least.
system. A chap from Germany called Alexander Kappes (cc'd) got
in touch with me a few weeks ago and has written the start of
Approach control. At the moment tuning in to a valid approach
frequency (Dortmund or East Midlands) should result in vectors to
a spot about 3 miles from the active runway, and a telling off if you
stray too far from the correct course, in the console window. He
seems to know what he's doing so expect this to improve rapidly!!
I've added a rudimentry AI manager and a hardwired Cessna at
KEMT on the runway - I'll remove it before the next release if I don't
have it flying by then. There seems to be an issue with framerate
which drops alarmingly when looking at it - I've a feeling that I've
possibly created several Cessnas on top of each other, but am not
sure.
- implement the standard FGSubsystem interface, for consistency
- eliminate current_autopilot and add get/set_autopilot to FGGlobals,
for consistency
- use private methods rather than static functions for tying
properties
There should be no change in functionality.
is a work in progress and needs severe enhancement before it will be
useful. It provides a UDP data channel that goes both ways between
flightgear and the fdm. It also provides a TCP 'command' channel so
flightgear can 'reliably' send commands to the remote fdm (such as set
starting position, reset on ground, etc.)
subsystem to Flightgear. No more functionality is implemented
than at present (apart from an ATIS bug-fix - station wouldn't
change if the radio was switched directly from one station to
another) but it is much neater than the current hack and should be
easily extendable.
Some cruft is still probably left over in radiostack.[ch]xx such as
the bindings to the comm frequencies but I'll leave removing those
until I'm sure they're not needed there.
Added two new properties:
/environment/temperature-sea-level-degc
/environment/pressure-sea-level-inhg
These are now supported in FGEnvironment as well, though they always
have the same value for now. They need to be hooked up to the FDMs.
different locations, and hitched it into FGGlobals. FGEnvironmentMgr
has taken over as the subsystem, while FGEnvironment is simple the
information that it returns. I've removed current_environment
completely -- everything now uses properties or goes through
FGGlobals. FGGlobals itself has a couple of useful methods:
const FGEnvironment * get_environment ();
const FGEnvironment * get_environment (double lat, double lon, double alt);
The first one returns the environment data for the plane's current
position, while the second returns the environment data for any
arbitrary location. Currently, they both return the same information,
but that will change soon.
properties have been renamed from wind-(north|east|down)-fps to
wind-from-(north|east|down)-fps, and the FDMs modified appropriately.
No other changes should be visible unless FG_OLD_WEATHER is defined.
are being driven from an external data source.)
Akso found and fixed a bug in the simgear that caused the time to go goofy
temporarily while scenery was being loaded.
/sim/freeze/master (implimented)
/sim/freeze/fuel (implimented)
/sim/freeze/position (not implimented)
/sim/freeze/time-of-day (not implimented)
/sim/freeze/master is bound to the 'p' key via keyboard.xml, however,
/sim/freeze/fuel is not bound to anything at the moment so you must
change it via the external property interface, or specify an initial
value on the command line.
function to allow property files as non-option parameters after the
options have finished (and added "--" to terminate options). It's now
possible to do something like
fgfs denver-am.fgd
or even
fgfs at-lax.fgd in-c310.fgd around-sunset.fgd
This works the same way as the --config option, but will be friendlier
for GUIs, where start-up situation files can now be associated easily
with FlightGear.
material-specific logic is now removed from the material library and
encapsulated in the material class itself, and materials are loaded
from $FG_ROOT/materials.xml rather than $FG_ROOT/materials. This also
removes a nasty bug in the old material-loading code that caused a
floating-point exception.
works like this:
1. Parse preferences.xml, which will usually specify a default
aircraft using the /sim/aircraft property.
2. If /sim/aircraft is specified and not empty, parse the properties
in $FG_ROOT/Aircraft/{/sim/aircraft}-set.xml to set up a default
aircraft.
3. During command-line parsing, whenever the --aircraft option appears
set /sim/aircraft appropriately and parse the properties in
$FG_ROOT/Aircraft/{/sim/aircraft}-set.xml. Any --config, --prop, or
--aircraft options afterwards will take precedence.
more intuitive. We switch to an include in the preferences.xml to include
the default model, and then if the user specifies --aircraft=, that is
expanded immediately so portions can be overwritten by subsequent command
line options.
a top level aircraft def file (c172-set.xml)
preferences.xml or --aircraft= or any other property setting mechanism can
be used to set the property "/sim/aircraft". After all options and config
files are parsed, the contents of /sim/aircraft is expanded into a *-set.xml
file and loaded.
