* Improved groundnetwork routing algorithm. Don't uncesscarily block taxiways. Instead, use a "just-in-time" blocking system. The unblocking algorithm still needs some work, but the current version is already a major improvement over the previous version.
* Some tweaks to the handover from ground to tower controller. Aircraft could refuse to take-off of even refuse to taxi onto the runway. This now seems to be solved.
* Landing AIAircraft now land properly!!!
* Fixed problems with takeoff scheduling.
* Untangled several vertical speed calculation algorithms.
* No more bent-over-backwards and jump-in-the-air AI aircraft initializations.
* Fixed intermixed target speed and target altitude during climb phase.
* Implemented beginnings of a "line up and wait" procedure.
* Tried to use actual runway elevation for calculating the decent profile.
/sim/ATC/radius should be a nummeric estimate of the size of your aircraft. A small aircraft fits into a large parking, but a large aircraft does not fit into a small parking space. Because the AI part of radius is also used for slightly different purposes (prioritizing gate assignmments, the given valuem may deviate slightly from the real aircraft size. See http:/wiki.flightgear.org/Aircraft.radii for an overview of currently used values for the redius property.
/sim/ATC/flight-type can be any one of "ga", "cargo", "gate", "mil-fighter", "mil-cargo", or "vtol". See http://wiki.flightgear.org/Interactive_traffic#A_technical_perspective for more information.
optionally, the property /sim/ATC/airline can be set set to a three letter icao airline code. By way of illustration, I will commit a number of startup preset files setting these properties shortly.
Also did some more finetuning to the traffic mananger routing algorithm can be any one of "ga", "cargo", "gate", "mil-fighter", "mil-cargo", or "vtol". See http://wiki.flightgear.org/Interactive_traffic#A_technical_perspective for more information.
optionally, the property /sim/ATC/airline can be set set to a three letter icao airline code. By way of illustration, I will commit a number of startup preset files setting these properties shortly.
Also did some more finetuning to the traffic mananger routing algorithm.
Traffic Manager:
* Just continue routing until we run out of flights. This change removes one of the major requirements for setting the "Home port" field.
* Add a time restriction requirement for the aircraft scheduler; this became necessary after removing the limited-to-home-port routing restriction.
* Added a new field to the heuristics calculation: take into account whether an aircraft has already been used in a previous session. Rotate aircraft assignments for greater variability across sessions.
* Added a revision number to the cache files, so that old cache results, which are no longer compatible with the new file format, are discarded.
Groundnetwork and traffic control:
* Added a revision number to the cache files, so that old and incompatible results are discarded.
* The caching algorithm probably didn't store the correct data for airports that were processed while the user was quite far away. This is now corrected by checking whether the cached elevation data are equal to the generic airport elevation.
AIAircraft:
* I've been searching for the infamous aircraft bend-over-backward bug, that can occur during initialization, but to no avail yet. The only variable potentially responsible (tgt_vs) wich can explain the irregular jumping behavior, as well as the weird pitch results is initialized in AIAircraft's only constructor (through AIBase), and I can't find any situation in the ground handling code where this variable could get bizarre values. But,
* a couple of tgt_vs. calculations appear to be completely redundant. This value was calculated twice inside the ProcessFlightplan function, and subsequently again in the updateSecondaryTargetValues function. I have removed the calculations in the process flightplan function, without any apparent side effect.
- Better transistion between taxi and takeoff phases.
- Skipping the pushback stages when a gate doesn't require push-back.
- Some test code always chooses the user aircraft as the one that has to hold position.
- Change AIFlightPlan::waypoint into an independent class FGAIWaypoint
- Don't update leg count until the aircraft has passed the last waypoint that was created by the corresponding leg
- Clear ground network rendering for controllers that are no longer active.
* Update AI aircraft object based on user position.
* Process flightplan
* Don't try to update the radar information for AIAircraft that don't have a valid manager pointer
* Allow position and intentions to be monitored and updated by the Startup controller
* Added a "parent" pointer to the startup controller to allow communication with the groundnetwork.
* Implemented a render() function for the Startup controller
* Renamed "FGGroundNetwork::getRenderNode() to FGGroundnetwork::render()
- Fixed a bug in AI aircraft ground steering code: When aircraft were not moving, the value of headingchangeRate kept increasing to insane levels. Although this was clamped to a maximum of 30 degrees per second, the initial rate could still push the aircraft in the wrong direction. In practice, this bug would be visible when an AI aicraft would be pushed back, when it tended to veer to the right.
- Make sure that the aircraft slows down well ahead of the pushback point. This change ensures that the AC will actually reach the pushback point. It also ensures a slightly tighter steering range.
- AI ground steering rate is tuned to 30 degrees per second at a nominal taxispeed of 15. I now modulate the heading adjustment rate by manipulating the adjustment using a non-linear function (the sqrt). This allows for a slightly tighter turn radius at speeds < 15 and slightly looser turns at speeds > 15.
- The AI Flightplan generation code can return false. This can be used to determine whether any additional AI aircraft may be created. Currently, the function returns false when no more parkings are available. This should limit the build-up of huge AIAircraft tower stacks.
- The ground network can now graphically display all aircraft actitivy on the ground network by using a virtual marker system.
* Added an AIAircraft that is shadowing the user aircraft's behavior, in terms of AI / ATC interactions
* Set up a shadow AI FlightPlan that is used for tracking the user's aircraft.
* Started transfering the ATC infrastructure to be driven by it's own subsystem
* Changed the bahavior of the "'" key so that it is no longer driven by ATCDCL, but it now triggered by the new subsystem based ATC module.
Rename ATC/atis.[ch]xx to ATC/atis_mgr.[ch]xx, to avoid confusingly
having 2 atis.cxx and 2 atis.hxx in the source tree. Also fix a copy
and paste error in src/ATCDCL/CMakeLists.txt.
This patch removes the conditional compilation of ATCDCL, compiling both
the old and new ATC systems. The old system only provides ATIS, AWOS and
some dialog lookups, and hence should not conflict with the new system.
