${CMAKE_SOURCE_DIR}/src/EmbeddedResources/FlightGear-resources.xml
(currently empty) is automatically "compiled" into
${CMAKE_BINARY_DIR}/src/EmbeddedResources/FlightGear-resources.[ch]xx by
fgrcc inside the build directory. These files are incorporated into the
FlightGear build (FlightGear-resources.cxx is linked into FlightGear).
When the XML embedded resource declaration file added here,
FlightGear-resources.xml, is compiled, fgrcc is passed the
--root=${CMAKE_SOURCE_DIR} option, so that files referred to in
FlightGear-resources.xml are looked up relatively to the root directory
of the FlightGear repository. One could use a second XML embedded
resource declaration file compiled with a different --root option to
grab files from FGData, for instance. I would name such a file
FGData-resources.xml to be consistent with the current naming scheme.
Note: this --root option applies to the paths of real files. Don't
confuse it with the 'prefix' attribute of <qresource> elements
inside XML resource declaration files (such as
FlightGear-resources.xml), which applies to the virtual path of
each resource defined beneath.
The commands in src/Main/CMakeLists.txt ensure that
FlightGear-resources.xml is recompiled with fgrcc whenever it is
changed, and obviously also when FlightGear-resources.cxx or
FlightGear-resources.hxx is missing. However, CMake doesn't know how to
parse fgrcc XML resource declaration files, therefore when a resource is
modified but the XML file it is declared in is not (here,
FlightGear-resources.xml), you have to trigger yourself a recompilation
of the XML resource declaration file to see the new resource contents
inside FlightGear. The easiest ways to do so are:
- either update the timestamp of the XML resource declaration file;
- or remove one or both of the generated files
(FlightGear-resources.cxx and FlightGear-resources.hxx here).
The EmbeddedResourceManager is created in fgMainInit() just after
Options::processOptions() set the language that was either requested by
the user or obtained from the system (locales). Resources from
FlightGear-resources.cxx are added to it, after which
EmbeddedResourceManager::selectLocale() is called with the user's
preferred locale (obtained with FGLocale::getPreferredLanguage()).
Upon reset (fgStartNewReset()), EmbeddedResourceManager::selectLocale()
is called in a similar way after Options::processOptions(), however in
this case the EmbeddedResourceManager instance doesn't have to be
recreated.
- Rename fatalMessageBox() to fatalMessageBoxWithoutExit(). This should
prevent the kind of bug that prompted this set of changes: someone
calling fatalMessageBox(), assuming the program would stop at that
point, whereas in reality it did not.
- Add new function fatalMessageBoxThenExit(). This is not vital of
course, but allows one to spare one line here and there and to apply
the DRY principle for such fatal exits.
- Replace every existing call to fatalMessageBox() with one or the other
of the two new functions. Improve formatting along the way. This
fixes a few bugs of the kind explained above.
Make a single Cmake value to expose the build type to code, and use
this to default a run-time ‘developer-mode’ property, which can be
over-ridden from the command line.
Use this to drive the different warning levels. Policies subject to
review, especially whether nightly builds should default to
developer mode or not.
Uses TTF fonts, and displays more information textually including
the application version and current aircraft.
Also rename FGRenderer::splashinit to preinit, as was suggested
a long time ago.
This change is the logical counterpart of SimGear's change from commit
79f869a7f32910197be72b21f6489fbbba02c836 that moved the following files
from simgear/misc to simgear/io/iostreams:
gzcontainerfile.cxx
gzcontainerfile.hxx
gzfstream.cxx (formerly zfstream.cxx)
gzfstream.hxx (formerly zfstream.hxx)
sgstream.cxx
sgstream.hxx
sgstream_test.cxx
Requires FGData commit: 0565eaab10a5d466cd485766b17d1870936a0a57
(which actually renames the file).
Also disables the preferences-load command since I don’t believe it
would actually be safe to reload the defaults without doing a simulator
reset (aircraft -set.xml values would be overwritten, for example)
This is likely to fix the problem preventing startup on Windows when the
username contains non-ASCII characters (cf.
<https://forum.flightgear.org/viewtopic.php?f=22&t=31320>). Thanks to
Headhunter76 for the useful report and to wkitty42 for doing the liaison
officer. ;-)
I can't actually test this, because I don't have Windows. Windows users
should report whether this works for them.
It is not needed anymore to hardcode the number of lines of
$FG_ROOT/Airports/apt.dat.gz. The new method, which relies on
SGPath::sizeInBytes() and sg_gzifstream::approxOffset(), works as well
for the other dat files.
Add a new NavCache rebuild phase, REBUILD_READING_APT_DAT_FILES, since
the process is now made of two parts.
Rename NavDataCachePrivate::getDatFilesPaths() to
NavDataCachePrivate::findDatFiles(), because it now returns a
DatFilesGroupInfo (new struct) instead of a PathList. For the same
reason, rename NavDataCachePrivate::aptDatPaths to
NavDataCachePrivate::aptDatFilesInfo. Adapt signatures, etc.
This requires up-to-date SimGear and FGData.
Remove uses of .str(), .c_str() and some other methods of SGPath.
Pass SGPath directly where possible, or explicitly convert to the
appropriate 8-bit encoding.
When set on the command line, will be used for aircraft packages. When
set in the Qt launcher, will also be used for aircraft downloads at
all times.
When changing the path in the launcher, the set of aircraft catalogs
is refresh automatically. Note the default catalog may need to be
re-installed.
The problem was that the change to make FGScenery a standard subsystem caused
the particle OSG group to no longer be inserted into the scene graph. The
solution was to convert the particle group to be set up as a standard branch of
the scene graph, alongside the terrain, models, aircraft, and interior branches.
The particle system is now set up as part of the init() subsystem function call,
so it is compatible with the new subsystem design.
- remove some global headers from AI headers, to avoid pollution
- change how ATC owns the ‘player’ FGAIAircraft so reset works
- ensure AIAircraft controllers are cleared on unbind for reset
The old Mac launcher doesn’t work on Yosemite, add a tiny
Qt-based launcher inside the main process (no need to fork /
exec) which runs before the OSG window is created.
Will be merged for 3.4, hopefully with no impact on other
platforms.
- /sim/aircraft can be set to package ID, including qualified
package ID. If not matching package is found, falls back to
traditional search of fg-aircraft for -set.xml files
This is too destructive for many established things, so revert it.
Instead, make the FDM shell save /fdm state on postinit(), and
restore it on re-init (which reposition invokes).
- use old-style reset as the basis for a lightweight 'reposition' command. This does not restore state, or reset
time management, but does reset the FDM and re-finalize position.
Had to add this to FGGlobals, since it needs to be cleaned up
alongside the sound manager (which ideally it would be owned by,
but that's a change for another day)
Write PID file to FG_HOME, use this to detect multiple launches.
When this situation is detected, set a marker property and place various
objects into read-only mode, such as the NavCache and TerraSync.
PID file is created using open+unlink semantics on POSIX, and
DELETE_ON_CLOSE on Windows, so it will be removed when fgfs exits,
even if killed or crashes.
This allows us to display a platform-native dialog for problems
which occur early in startup (before we can show a PUI/Canvas dialog).
In particular this improves feedback where FG_HOME, FG_DATA or
aircraft selection is wrong, all of which happen very early in startup.
- default to SUBSYSTEM:WINDOWS (we can still AllocConsole if needed)
- add --console option to get a console on Windows
- ensure --show-aircraft and --help modes show the console automatically.
- restore-defaults kills the nav cache, terra-sync cache
- new ignore-autosave option bypasses autosave.xml and leaves it
untouched (does not over-write on exit)
Replace many lingering calls to exit() from the code,
replacing most with exception throws, which can be
caught by the existing mechanisms.
Update the option-parsing code to return an explicit
value indicating what to do (e.g., exit status to return
to the shell).
- Enable the terrasync persistent cache
- Ensure terraysync scenery dirs exist before NavCache init, so the paths are stable
- Notify TerraSync on reposition, so we sync the full 3x3 set of tiles.
