* Use "const string&" rather than "string" in function calls when appropriate.
* Use "const Point3D&" instead of "Pint3D" in function calls when appropriate.
* Improved course calculation in calc_gc_course_dist()
* Safer thread handling code.
Vassilii Khachaturov:
Dont use "const Point3D&" for return types unless you're absolutely sure.
Erik Hofman:
* Use SGD_(2)PI(_[24]) as defined in simgear/constants.h rather than
calculating it by hand every time.
I have done a patch to eliminate the jitter of 3D-objects near the viewpoint
(for example 3D cockpit objects).
The problem is the roundoff accuracy of the float values used in the
scenegraph together with the transforms of the eyepoint relative to the
scenery center.
The solution will be to move the scenery center near the view point.
This way floats relative accuracy is enough to show a stable picture.
To get that right I have introduced a transform node for the scenegraph which
is responsible for that shift and uses double values as long as possible.
The scenery subsystem now has a list of all those transforms required to place
objects in the world and will tell all those transforms that the scenery
center has changed when the set_scenery_center() of the scenery subsystem is
called.
The problem was not solvable by SGModelPlacement and SGLocation, since not all
objects, especially the scenery, are placed using these classes.
The first approach was to have the scenery center exactly at the eyepoint.
This works well for the cockpit.
But then the ground jitters a bit below the aircraft. With our default views
you can't see that, but that F-18 has a camera view below the left engine
intake with the nose gear and the ground in its field of view, here I could
see that.
Having the scenery center constant will still have this roundoff problems, but
like it is now too, the roundoff error here is exactly the same in each
frame, so you will not notice any jitter.
The real solution is now to keep the scenery center constant as long as it is
in a ball of 30m radius around the view point. If the scenery center is
outside this ball, just put it at the view point.
As a sideeffect of now beeing able to switch the scenery center in the whole
scenegraph with one function call, I was able to remove a one half of a
problem when switching views, where the scenery center was far off for one or
two frames past switching from one view to the next. Also included is a fix
to the other half of this problem, where the view position was not yet copied
into a view when it is switched (at least under glut). This was responsible
for the 'Error: ...' messages of the cloud subsystem when views were
switched.
Split up main.cxx into a program manegement part (which remains in
main.cxx) and a render part (the new renderer.?xx files). Also turn
the renderer into a small class of it's own. At this time not really
exctining because most of the stuff is still global, but it allows us
to slowly migrate some of the global definitions into the new class.
The FGRenderer class is now managed by globals, so to get the renderer
just call gloabals->get_renderer()
At some pijt it might be a good idea to also turn the remaining code in
main into a class of it's own. With a bit of luck we end up with a more
robust, and better maintainable code.
paging system much more robust when position change is very rapid and sporadic.
Recall that we must load 3d models in the main render thread because model
loading can trigger opengl calls (i.e. with texture loading) and all opengl
calls *must* happen in the main render thread.
To accomplish this we load the base tile in the pager thread and build a work
queue of external models that need to be loaded. We never allow a tile to be
paged out of the tile cache until all it's pending model loads are complete.
However, when changing position very rapidly, we can quickly create a huge
backlog of pending model loads because we are changing positions faster than we
can load the associated models for the existing tiles. The end result is
that tiles that are long out of range can't be removed because there is still
a huge backlog of pending model load requests and memory blows up.
This change being committed allows the tile paging system to remove tiles
if they are out of range, even when there are pending models to load. The
model loading code in the render thread can now check to see if the tile
exists and discard any model load request for tiles that no longer exist.
This situation should never occur in normal operation, but could occur in
"contrived" situations where an external script was rapidly changing
the simulator position to then be able to query FG terrain height, and doing
this for a large number of points that are distributed across a large area.
Wouldn't it be better to prepare the whole list of paths (or two
separate ones for Terrain/Objects if necessary) in FGGlobals::set_fg_scenery,
and to pass the vector<string>s to FGTileEntry::load? It doesn't seem to make
a lot of sense to split the path up, modify it, mount it together to one string
again, and then let FGTileEntry::load split it up again.
Here we go:
Main/globals.cxx
================
As fg_scenery is now a string_list, we don't need initialization. Furthermore,
this list is cleared with every set_fg_scenery() call.
ctor: create default dir from fg_root if necessary. Otherwise check all paths
of --fg-scenery/FG_SCENERY: If the path doesn't exist, ignore it. If it contains
a dir Terrain and/or Objects, then only add that to the list. If it contains
neither, then use the path as is.
Scenery/tileentry.cxx
=====================
Trivial: don't split a "base path", but use the given path_list as is.
(I considered a variable name "path_list" better suited than "search".)
Scenery/FGTileLoader.cxx
========================
No more fiddling with sub-paths. This has to be delivered by get_fg_scenery
already.
from the rest of the runway lighting. VASI/PAPI lights are generally
always on. Also, the red/white VASI coloring has never worked right.
This is also a step towards fixing that problem.
search when loading scenery tiles. (I am not set on using ";" as the
delimiter because it is a command separator in unix, but ":" is a critical
part of the windows file naming scheme (c:\foo\bar) so that is even worse.)
Example:
--fg-scenery=/stage/fgfs04/curt/Scenery-0.9.1/Scenery;/stage/helio1/curt/Scenery
-0.7.9
the ascii scenery file format has actually worked in quite some time, and the
ADA runway light code has been supersceded by a slightly different mechanism.
the tile cache it's ssg elements are disconnected from the main ssg scene
graph, and then the tile is thrown on the end of a delete queue. The
tilemgr->update() routine runs every frame. It looks at this queue and if
it is non-empty, it incrementally frees the compents of the first tile
on the queue. When the tile is completely free it is removed from the queue.
The amount of time to free the memory for even a single tile can be quite
substantial, especially with the increased overhead of dynamic/random
ground objects. This change allows the system to spread the work of freeing
tile memory out over many frames so you don't get a noticable single frame
hit or stutter.
This is a new improved patch for the previous tile manager fixes.
Rather than building dependencies between FGlocation or the viewer or fdm with
tilemgr what I ended up doing was linking the pieces together in the Mainloop
in main.cxx. You'll see what I mean...it's been commented fairly well. More
than likely we should move that chunk somewhere...just not sure where yet.
The changes seem clean now. As I get more ideas there could be some further
improvement in organizing the update in tilemgr. You'll note that I left an
override in there for the tilemgr::update() function to preserve earlier
functionality if someone needs it (e.g. usage independent of an fdm or
viewer), not to mention there are a few places in flightgear that call it
directly that have not been changed to the new interface (and may not need to be).
The code has been optimized to avoid duplicate traversals and seems to run
generally quite well. Note that there can be a short delay reloading tiles
that have been dropped from static views. We could call the tile scheduler on
a view switch, but it's not a big deal and at the moment I'd like to get this
in so people can try it and comment on it as it is.
Everything has been resycned with CVS tonight and I've included the
description submitted earlier (below).
Best,
Jim
Changes synced with CVS approx 20:30EDT 2002-05-09 (after this evenings updates).
Files:
http://www.spiderbark.com/fgfs/viewer-update-20020516.tar.gz
or
http://www.spiderbark.com/fgfs/viewer-update-20020516.diffs.gz
Description:
In a nutshell, these patches begin to take what was one value for ground
elevation and calculate ground elevation values seperately for the FDM and the
viewer (eye position). Several outstanding view related bugs have been fixed.
With the introduction of the new viewer code a lot of that Flight Gear code
broke related to use of a global variable called "scenery.cur_elev".
Therefore the ground_elevation and other associated items (like the current
tile bucket) is maintained per FDM instance and per View. Each of these has a
"point" or location that can be identified. See changes to FGLocation class
and main.cxx.
Most of the problems related to the new viewer in terms of sky, ground and
runway lights, and tower views are fixed.
There are four minor problems remaining. 1) The sun/moon spins when you pan
the "lookat" tower view only (view #3). 2) Under stress (esp. magic carpet
full speed with max visibility), there is a memory leak in the tile caching
that was not introduced with these changes. 3) I have not tested these
changes or made corrections to the ADA or External FDM interfaces. 4) The
change view function doesn't call the time/light update (not a problem unless
a tower is very far away).
Details:
FDM/flight.cxx, flight.hxx - FGInterface ties to FGAircraftModel so that it's
location data can be accessed for runway (ground elevation under aircraft)
elevation.
FDM/larsim.cxx, larcsim.hxx - gets runway elevation from FGInterface now.
Commented out function that is causing a namespace conflict, hasn't been
called with recent code anyway.
FDM/JSBSim/JSBSim.cxx, YASim/YASim.cxx - gets runway elevation from
FGInterface now.
Scenery/newcache.cxx, newcache.hxx - changed caching scheme to time based
(oldest tiles discard).
Scenery/tileentry.cxx, tileentry.hxx - added place to record time, changed
rendering to reference viewer altitude in order to fix a problem with ground
and runway lights.
Scenery/tilemgr.cxx, tilemgr.hxx - Modified update() to accept values for
multiple locations. Refresh function added in order to periodically make
the tiles current for a non-moving view (like a tower).
Main/fg_init.cxx - register event for making tiles current in a non-moving
view (like a tower).
Main/location.hxx - added support for current ground elevation data.
Main/main.cxx - added second tilemgr call for fdm, fixed places where viewer
position data was required for correct sky rendering.
Main/options.cxx - fixed segfault reported by Curtis when using --view-offset
command line parameter.
Main/viewer.cxx, viewer.hxx - removed fudging of view position. Fixed numerous
bugs that were causing eye and target values to get mixed up.
to have attached an ssg loaded object to this branch, then plib will remove
it and all it's states (and textures) which will call opengl api commands
which will crash the program if run from a separate thread from the main render
thread.
- model loading deferred to primary thread
- tile removal deferred to paging thread
- other tweaks and rearrangments.
Airport signs
- first stab at some support for adding taxiway and runway signs. This
is non-optimal, but I'm under the gun for a demo.
a newly loaded tile to the scene graph. Instead it puts it in a queue
for the tile manager. I've used your counter_hack to check the loaded
queue and add any tiles to the scene graph. I was playing around with
the counter_hack so there might be some commented out code, etc. I also
changed some SG_DEBUGs to SG_INFOs so I could track the tile loading.
He writes:
Here are the final changes to add threads to the tile loading. All the
thread related code is in the new FGTileLoader class.
./configure.in
./acconfig.h
Added --with-threads option and corresponding ENABLE_THREADS
definition. The default is no threads.
./src/Scenery/tilemgr
Removed load_queue and associated references. This has been replaced by
a new class FGTileLoader in FGNewCache.
Made the global variable global_tile_cache a member.
schedule_needed(): removed global_tile_cache.exists() tests since
sched_tile() effectively repeats the test.
initialize_queue(): removed code that loads tiles since this is now
performed by FGTileLoader.
update(): ditto
./src/Scenery/newcache
Added new class FGTileLoader to manage tile queuing and loading.
tile_map typedefs are private.
exists() is a const member function.
fill_in(): deleted
load_tile(): added.
./src/Scenery/FGTileLoader
The new threaded tile loader. Maintains a queue of tiles waiting to be
loaded and an array of one or more threads to load the tiles. Currently
only a single thread is created. The queue is guarded by a mutex to
synchronize access. A condition variable signals the thread when the
queue is non-empty.
CLO: I made a few tweaks to address a couple issues, hopefully what we
have is solid, but now we kick it out to the general public to see. :-)
tile has been loaded. Since this flag can be set by another thread I've
declared it "volatile bool".
Also cleaned up delete vs delete[] usage. Gcc is happy with delete[],
which is the correct usage.
structure. The new approach is simpler, more flexible, and more dynamics.
We can now dynamically size the tile cache up and down. Also, the range
of tiles to load is now dependent on visibility and is calculated to always
bring in enough tiles.
from the pre-ssg / render everything ourselves days. Replaced with a
material library manager that is much better suited for working in the
context of ssg. This simplified and cleaned up a ton of old junk.
