Previously both PeriodicPropertyPublisher and TriggeredPropertyPublisher
published irrespective of the property value.
This change adds an optional epsilon value below which a
notification will not be made. This significantly reduces the number
of Emesary notifications generated and therefore updates to the
displays.
Previously the GDU-1045 displays autopilot buttons didn't
work because they were missing a required <offset> element
for the FG1000HardKeyPushed command. This fixes that, as
well as adding a verification script using xmllint and also
fixing a the NAV button which was incorrectly mapped to FD.
For the moment the default publisher just uses the the
/systems/electrical/[volts|amps], but aircraft with better
electrical simulations can define their own publisher to
pass in correct data as required.
The G1000 highlights the active NAV and COM radios in cyan.
In the NAV case, this is the radio being used by the CDI.
In the COM case, this is the COM radio selected on the audio panel.
Previously it was difficult to create custom EIS as paths
needed to be defined in multiple places.
This change creates a hash of id and paths to make this easier
in the future.
Previously the GenericFuelPublisher would barf if tank contents
weren't defined properly with numbers.
Also the XML and .ac files were inconsistent in their use of PANDown
vs PanDown.
Both spotted by Mark JOSEPH (ePilot). Now fixed.
Previously select XPDR->CODE->7 and then another number caused very odd
transponder codes. Turns out this was due to extra whitespace in the
label causing various string concatenations and evaluations to fail.
Previously a completely new PFD or MFD was created when the Debug
menu items were used. This cause significant slowdown if used
multiple times. Now we just create one instance of each and re-use it.
Also clean up redundant code in the GUI.
Implement the Nearest Airports PFD softkey, displaying a scrollable
list of the closest 25 airports within 200nm.
Also fix a couple of minor bugs and add self-checking to the
GroupElement
Previously the FG1000 and MFD assumed that all notifications received
via Emesary had a Device_Id field. This is true for
notifications.PFDEventNotification.DefaultType but not for other
messages - e.g. those generated by the AN SPN 46 system on the
carrier.
The effect of this was that when Nimitz was loaded, the FG1000 stopped
working with various errors.
This fix checks the notification type before the Device_Id.
- Make Range knob behaviour consistent between PFD inset and MFD maps
- Add rotation animations for the HDG and CRS knobs
- Change the CRS knob behaviour:
- BARO on outer knob (consistent with FMS knob)
- CRS on inner knob
- Shift-click on inner knob to center (consistent with HDG knob)
- Pre-load nearest airports to remove significant freeze when the
NearestAirports page is accessed for the first time.
- Update multikey support to provide easy access to commonly used MFD
pages and access to softkeys.
Approach and GS modes - FG1000 and GFC700 can now be used for
autopilot coupled ILS or GPS approaches
Also:
- FLC mdoe now include an airspeed bug
- VDI indicator beside altitude tape now works
- Marker beacon displays O/M/I as appropriate
GFC700 now supports the Selected Altitude Capture (ALTS) and Altitude
Hold (ALT) modes.
ALTS is automatically armed in more vertical modes, and allows capture
of whatever altitude is selected.
Add Multikey support for the FG1000 (:GF and :GP) to improve useability
by allowing direct entry of strings. This is massively easier than
fiddling with the control knobs.
Also correct interface variable name "frequency" to "period", which is
more accurate.
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.FG1000: Remote bugged rotations, add show/hide
Remove some rotations which were not required.
Add hide()/show() methods to switch on/off specific displays. Allows
the FG1000 to be controlled by an electrical supply rather than always
being on.
/instrumentation/FG1000/adc-update-frequency can optionally
be set to control the update frequency of the main ADC information.
Set to "0" to update every frame.
Periodically (default every 5 s), publish all properties
being tracked by the TriggeredPropertyPublisher.
This ensures that clients created after the TriggeredPropertyPublisher
will receive values for properties that change rarely (e.g. NAV/COM)
