fgdata/Aircraft/c172p/Tutorials/startup.xml

<?xml version="1.0"?>

<PropertyList>

    <name>Start Up</name>

    <description>
Before you go flying, you'll need to learn how to start the engines.

This tutorial will take you through starting the Cessna 172p.
    </description>

    <audio-dir>Tutorials/startup</audio-dir>
    <timeofday>morning</timeofday>
    <presets>
        <airport-id>LELL</airport-id>
        <on-ground>1</on-ground>
        <runway>13</runway>
        <altitude-ft>-9999</altitude-ft>
        <latitude-deg>41.52158426</latitude-deg>
        <longitude-deg>2.100607724</longitude-deg>
        <heading-deg>40</heading-deg>
        <airspeed-kt>0</airspeed-kt>
        <glideslope-deg>0</glideslope-deg>
        <offset-azimuth-deg>0</offset-azimuth-deg>
        <offset-distance-nm>0</offset-distance-nm>
    </presets>

    <step>
        <set>
            <property>/sim/model/c172p/brake-parking</property>
            <value>1</value>
        </set>
        <set>
            <property>/controls/flight/flaps</property>
            <value>0.0</value>
        </set>
        <set>
            <property>/controls/switches/magnetos</property>
            <value>0</value>
        </set>
        <set>
            <property>/controls/engines/current-engine/throttle</property>
            <value>0.0</value>
        </set>
        <set>
            <property>/engines/active-engine/running</property>
            <value>false</value>
        </set>
        <set>
            <property>/instrumentation/adf/frequencies/selected-khz</property>
            <value>367</value>
        </set>
        <set>
            <property>/environment/weather-scenario</property>
            <value>Fair weather</value>
        </set>
        <set>
            <property>/controls/flight/elevator-trim</property>
            <value>0.17</value>
        </set>
        <set>
            <property>/consumables/fuel/tank[0]/selected</property>
            <value>true</value>
        </set>
        <set>
            <property>/consumables/fuel/tank[1]/selected</property>
            <value>true</value>
        </set>
        <set>
            <property>/controls/anti-ice/engine/carb-heat</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/switches/master-avionics</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/switches/master-bat</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/switches/master-alt</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/lighting/taxi-light</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/lighting/landing-lights</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/anti-ice/pitot-heat</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/lighting/nav-lights</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/lighting/beacon</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/lighting/strobe</property>
            <value>false</value>
        </set>
        <set>
            <property>/controls/lighting/instruments-norm</property>
            <value>0</value>
        </set>
        <set>
            <property>/controls/engines/engine/primer</property>
            <value>0</value>
        </set>
        <set>
            <property>/controls/engines/engine/primer-lever</property>
            <value>false</value>
        </set>
        <set>
            <property>/sim/model/door-positions/baggageDoor/position-norm</property>
            <value>0</value>
        </set>
        <set>
            <property>/sim/model/door-positions/leftDoor/position-norm</property>
            <value>0</value>
        </set>
        <set>
            <property>/sim/model/door-positions/rightDoor/position-norm</property>
            <value>0</value>
        </set>
        <set>
            <property>/sim/model/c172p/securing/chock</property>
            <value>false</value>
        </set>
        <set>
            <property>/sim/model/c172p/securing/tiedownL-visible</property>
            <value>false</value>
        </set>
        <set>
            <property>/sim/model/c172p/securing/tiedownR-visible</property>
            <value>false</value>
        </set>
        <set>
            <property>/sim/model/c172p/securing/tiedownT-visible</property>
            <value>false</value>
        </set>
        <set>
            <property>/sim/model/c172p/securing/pitot-cover-visible</property>
            <value>false</value>
        </set>
        <set>
            <property>sim/model/c172p/engine_flag_0</property>
            <value>1</value>
        </set>
        <set>
            <property>sim/model/c172p/engine_flag_1</property>
            <value>0</value>
        </set>
        <set>
            <property>/controls/engines/active-engine</property>
            <value>0</value>
        </set>
        <set>
            <property>sim/model/c172p/bushkit_flag_0</property>
            <value>1</value>
        </set>
        <set>
            <property>sim/model/c172p/bushkit_flag_1</property>
            <value>0</value>
        </set>
        <set>
            <property>sim/model/c172p/bushkit_flag_2</property>
            <value>0</value>
        </set>
        <set>
            <property>sim/model/c172p/bushkit_flag_3</property>
            <value>0</value>
        </set>
        <set>
            <property>sim/model/c172p/bushkit_flag_4</property>
            <value>0</value>
        </set>
        <set>
            <property>fdm/jsbsim/bushkit</property>
            <value>0</value>
        </set>
        <set>
            <property>/sim/model/c172p/cockpit/control-lock-placed</property>
            <value>false</value>
        </set>
        <set>
            <property>/sim/model/c172p/cockpit/control-lock-visible</property>
            <value>false</value>
        </set>
        <message>After finishing the Preflight Inspection you're now ready to learn how to start the engine.</message>
        <view>
            <heading-offset-deg>0.0</heading-offset-deg>
            <pitch-offset-deg>-12</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.21</x-offset-m>
            <y-offset-m>0.19</y-offset-m>
            <field-of-view>73.6</field-of-view>
        </view>
        <wait>7</wait>
    </step>

    <step>
        <message>Verify that the parking brake is still set.</message>
        <view>
            <heading-offset-deg>1.3</heading-offset-deg>
            <pitch-offset-deg>-41.9</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.2</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>50.1</field-of-view>
        </view>
        <marker>
            <x-m>-0.3092</x-m>
            <y-m>-0.1992</y-m>
            <z-m>-0.3284</z-m>
            <scale>3.4667</scale>
        </marker>
        <error>
            <message>Set the parking brake.</message>
            <condition>
                <not>
                    <property>sim/model/c172p/brake-parking</property>
                </not>
            </condition>
        </error>
        <exit>
            <condition>
                <property>sim/model/c172p/brake-parking</property>
            </condition>
        </exit>
    </step>

    <step>
        <message>Check that all circuit breakers are in.</message>
        <set>
            <property>/sim/model/hide-yoke</property>
            <value>true</value>
        </set>
        <view>
            <heading-offset-deg>0.9</heading-offset-deg>
            <pitch-offset-deg>-29.9</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>-0.1</y-offset-m>
            <z-offset-m>0.1</z-offset-m>
            <field-of-view>42.4</field-of-view>
        </view>
        <error>
            <message>Push the AIR COND-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/aircond</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the AUTOPILOT-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/autopilot</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the BCN LT-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/bcnlt</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the FLAP-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/flaps</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the INST-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/instr</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the INT LT-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/intlt</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the LDG LT-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/landing</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the ALT-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/master</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the NAV LT-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/navlt</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the PITOT HT-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/pitot-heat</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the RADIO 1-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/radio1</property>
                </not>
            </condition>
        </error><error>
            <message>Push the RADIO 2-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/radio2</property>
                </not>
            </condition>
        </error><error>
            <message>Push the RADIO 3-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/radio3</property>
                </not>
            </condition>
        </error><error>
            <message>Push the RADIO 4-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/radio4</property>
                </not>
            </condition>
        </error><error>
            <message>Push the RADIO 5-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/radio5</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the STRB LT-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/strobe</property>
                </not>
            </condition>
        </error>
        <error>
            <message>Push the TURN COORD-breaker in.</message>
            <condition>
                <not>
                    <property>/controls/circuit-breakers/turn-coordinator</property>
                </not>
            </condition>
        </error>
        <exit>
            <condition>
                <and>
                    <property>/controls/circuit-breakers/aircond</property>
                    <property>/controls/circuit-breakers/autopilot</property>
                    <property>/controls/circuit-breakers/bcnlt</property>
                    <property>/controls/circuit-breakers/flaps</property>
                    <property>/controls/circuit-breakers/instr</property>
                    <property>/controls/circuit-breakers/intlt</property>
                    <property>/controls/circuit-breakers/landing</property>
                    <property>/controls/circuit-breakers/master</property>
                    <property>/controls/circuit-breakers/navlt</property>
                    <property>/controls/circuit-breakers/pitot-heat</property>
                    <property>/controls/circuit-breakers/radio1</property>
                    <property>/controls/circuit-breakers/radio2</property>
                    <property>/controls/circuit-breakers/radio3</property>
                    <property>/controls/circuit-breakers/radio4</property>
                    <property>/controls/circuit-breakers/radio5</property>
                    <property>/controls/circuit-breakers/strobe</property>
                    <property>/controls/circuit-breakers/turn-coordinator</property>
                </and>
            </condition>
        </exit>
    </step>

    <step>
        <message>Prime the engine.</message>
        <view>
            <heading-offset-deg>29.3</heading-offset-deg>
            <pitch-offset-deg>-29.6</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>-0.1</y-offset-m>
            <z-offset-m>0.1</z-offset-m>
            <field-of-view>48.4</field-of-view>
        </view>
        <marker>
            <x-m>-0.3198</x-m>
            <y-m>-0.4298</y-m>
            <z-m>-0.2587</z-m>
            <scale>0.5868</scale>
        </marker>
        <error>
            <message>Prime the engine a bit more!</message>
            <condition>
                <less-than>
                    <property>/controls/engines/engine[0]/primer</property>
                    <value>3</value>
                </less-than>
            </condition>
        </error>
        <exit>
            <condition>
                <and>
                    <greater-than-equals>
                        <property>/controls/engines/engine[0]/primer</property>
                        <value>3</value>
                    </greater-than-equals>
                    <not>
                        <property>/controls/engines/engine[0]/primer-lever</property>
                    </not>
                </and>
            </condition>
        </exit>
    </step>

    <step>
        <message>The Carburetor Heat must be cold.</message>
        <view>
            <heading-offset-deg>349.7</heading-offset-deg>
            <pitch-offset-deg>-27.9</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.1</x-offset-m>
            <y-offset-m>-0.1</y-offset-m>
            <z-offset-m>0.1</z-offset-m>
            <field-of-view>48.4</field-of-view>
        </view>
        <marker>
            <x-m>-0.2769</x-m>
            <y-m>-0.0917</y-m>
            <z-m>-0.1959</z-m>
            <scale>0.5868</scale>
        </marker>
        <error>
            <message>Set the Carburetor to cold!</message>
            <condition>
                <property>/controls/engines/current-engine/carb-heat</property>
            </condition>
        </error>
        <exit>
            <condition>
                <not>
                    <property>/controls/engines/current-engine/carb-heat</property>
                </not>
            </condition>
        </exit>
    </step>

    <step>
        <message>Make sure fuel mixture is set to fully rich.</message>
        <view>
            <heading-offset-deg>346.8</heading-offset-deg>
            <pitch-offset-deg>-25.8</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.2</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>62.3</field-of-view>
        </view>
        <marker>
            <x-m>-0.3000</x-m>
            <y-m>0.0800</y-m>
            <z-m>-0.2050</z-m>
            <scale>3.0000</scale>
        </marker>

        <error>
            <message>Use the m key or mouse to select fuller mixture.</message>
            <condition>
                <less-than>
                    <property>/controls/engines/current-engine/mixture</property>
                    <value>0.85</value>
                </less-than>
            </condition>
        </error>

        <exit>
            <condition>
                <greater-than>
                    <property>/controls/engines/current-engine/mixture</property>
                    <value>0.85</value>
                </greater-than>
            </condition>
        </exit>
    </step>

    <step>
        <message>Open the throttle slightly. Use your joystick throttle control,
      or PgUp to increase throttle to about 20%.</message>
        <view>
            <heading-offset-deg>346.8</heading-offset-deg>
            <pitch-offset-deg>-25.8</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.2</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>62.3</field-of-view>
        </view>
        <marker>
            <x-m>-0.3342</x-m>
            <y-m>-0.0027</y-m>
            <z-m>-0.2289</z-m>
            <scale>3.1156</scale>
        </marker>

        <error>
            <message>Push in the throttle using PgUp, or your joystick throttle control.</message>
            <message>Open the throttle a bit more.</message>
            <condition>
                <less-than>
                    <property>/controls/engines/current-engine/throttle</property>
                    <value>0.15</value>
                </less-than>
            </condition>
        </error>
        <error>
            <message>That's a bit too much. Pull it out slightly using your joystick throttle control, or PgDn.</message>
            <message>That's a bit too much - pull it out slightly.</message>
            <condition>
                <greater-than>
                    <property>/controls/engines/current-engine/throttle</property>
                    <value>0.25</value>
                </greater-than>
            </condition>
        </error>

        <exit>
            <condition>
                <and>
                    <greater-than-equals>
                        <property>/controls/engines/current-engine/throttle</property>
                        <value>0.15</value>
                    </greater-than-equals>
                    <less-than-equals>
                        <property>/controls/engines/current-engine/throttle</property>
                        <value>0.25</value>
                    </less-than-equals>
                </and>
            </condition>
        </exit>
    </step>

    <step>
        <message>Turn the master switch on.</message>
        <view>
            <heading-offset-deg>12.2</heading-offset-deg>
            <pitch-offset-deg>-35.2</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.3</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>35.0</field-of-view>
        </view>
        <marker>
            <x-m>-0.3000</x-m>
            <y-m>-0.3858</y-m>
            <z-m>-0.1917</z-m>
            <scale>1.9333</scale>
        </marker>
        <set>
            <property>/sim/model/hide-yoke</property>
            <value>true</value>
        </set>

        <error>
            <message>Click the battery master switch to turn it on.</message>
            <condition>
                <not>
                    <property>/controls/switches/master-bat</property>
                </not>
            </condition>
        </error>

        <exit>
            <condition>
                <property>/controls/switches/master-bat</property>
            </condition>
        </exit>
    </step>

    <step>
        <message>Switch on the beacon.</message>
        <view>
            <heading-offset-deg>347.6</heading-offset-deg>
            <pitch-offset-deg>-29.9</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.3</x-offset-m>
            <y-offset-m>-0.0</y-offset-m>
            <z-offset-m>0.2</z-offset-m>
            <field-of-view>45.3</field-of-view>
        </view>
        <marker>
            <x-m>-0.3579</x-m>
            <y-m>-0.1537</y-m>
            <z-m>-0.2653</z-m>
            <scale>1.0992</scale>
        </marker>
        <error>
            <message>You have to warn everyone that you're about to start the engine so switch on the beacon now!</message>
            <condition>
                <not>
                    <property>/controls/lighting/beacon</property>
                </not>
            </condition>
        </error>
        <exit>
            <condition>
                <property>/controls/lighting/beacon</property>
            </condition>
        </exit>
    </step>

    <step>
        <message>Now, we'll check no-one is about to walk into our propeller.</message>
        <wait>2</wait>
        <view>
            <heading-offset-deg>44.0</heading-offset-deg>
            <pitch-offset-deg>-15.7</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.3</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>55.0</field-of-view>
        </view>
    </step>

    <step>
        <message>Looks clear.</message>
        <wait>2</wait>
        <view>
            <heading-offset-deg>296.6</heading-offset-deg>
            <pitch-offset-deg>-10.4</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.3</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>55.0</field-of-view>
        </view>
    </step>

    <step>
        <message>We need to switch on the magnetos.
      Click the middle hotspot three times, or use your mouse scroll wheel, so the key is set to BOTH.</message>
        <view>
            <heading-offset-deg>12.2</heading-offset-deg>
            <pitch-offset-deg>-35.2</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.3</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>35.0</field-of-view>
        </view>
        <marker>
            <x-m>-0.3689</x-m>
            <y-m>-0.3663</y-m>
            <z-m>-0.2985</z-m>
            <scale>3.0000</scale>
        </marker>

        <error>
            <message>Click the middle hotspot three times, so both magnetos are on and the key
        is set to BOTH.</message>
            <condition>
                <less-than>
                    <property>/controls/switches/magnetos</property>
                    <value>3</value>
                </less-than>
            </condition>
        </error>

        <exit>
            <condition>
                <equals>
                    <property>/controls/switches/magnetos</property>
                    <value>3</value>
                </equals>
            </condition>
        </exit>
    </step>

    <step>
        <message>Finally, we can start the engine. Hold down s, or the right hotspot until the engine catches.</message>
        <view>
            <heading-offset-deg>12.2</heading-offset-deg>
            <pitch-offset-deg>-35.2</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.3</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>35.0</field-of-view>
        </view>
        <marker>
            <x-m>-0.3689</x-m>
            <y-m>-0.3663</y-m>
            <z-m>-0.2985</z-m>
            <scale>3.0000</scale>
        </marker>

        <error>
            <message>Wrong way - set the magnetos back to BOTH.</message>
            <message>You need the magnetos on to start the engine. Set them to BOTH by clicking the middle hotspot or pressing ].</message>
            <condition>
                <not-equals>
                    <property>/controls/switches/magnetos</property>
                    <value>3</value>
                </not-equals>
            </condition>
        </error>

        <exit>
            <condition>
                <equals>
                    <property>/engines/active-engine/running</property>
                    <value>1</value>
                </equals>
            </condition>
        </exit>
    </step>

    <step>
        <message>Great, the engine is running. Adjust the throttle so we're running at between 800 and 1000 RPM.</message>
        <view>
            <heading-offset-deg>360.0</heading-offset-deg>
            <pitch-offset-deg>-23.0</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.2</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>60.0</field-of-view>
        </view>
        <marker>
            <x-m>-0.3791</x-m>
            <y-m>-0.3089</y-m>
            <z-m>-0.1320</z-m>
            <scale>3.8622</scale>
        </marker>
        <set>
            <property>/sim/panel-hotspots</property>
            <value>false</value>
        </set>

        <error>
            <message>You can release the starter motor now - the engine is running</message>
            <condition>
                <equals>
                    <property>/controls/switches/starter</property>
                    <value>true</value>
                </equals>
            </condition>
        </error>
        <error>
            <message>That's a bit high. Reduce throttle to below 1000 RPM using PgDn, or your joystick throttle control.</message>
            <condition>
                <greater-than>
                    <property>/engines/active-engine/rpm</property>
                    <value>1000.0</value>
                </greater-than>
            </condition>
        </error>
        <error>
            <message>That's too low. Increase throttle to above 800 RPM with PgUp, or your joystick throttle control.</message>
            <condition>
                <less-than>
                    <property>/engines/active-engine/rpm</property>
                    <value>800.0</value>
                </less-than>
            </condition>
        </error>

        <exit>
            <condition>
                <and>
                    <greater-than>
                        <property>/engines/active-engine/rpm</property>
                        <value>800</value>
                    </greater-than>
                    <less-than>
                        <property>/engines/active-engine/rpm</property>
                        <value>1000</value>
                    </less-than>
                </and>
            </condition>
        </exit>
    </step>

    <step>
        <message>Check the oil pressure.</message>
        <view>
            <heading-offset-deg>10.7</heading-offset-deg>
            <pitch-offset-deg>-13.9</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.3</x-offset-m>
            <y-offset-m>-0.0</y-offset-m>
            <z-offset-m>0.2</z-offset-m>
            <field-of-view>45.3</field-of-view>
        </view>
        <marker>
            <x-m>-0.3628</x-m>
            <y-m>-0.3876</y-m>
            <z-m>-0.0587</z-m>
            <scale>1.1322</scale>
        </marker>
        <wait>5</wait>
    </step>

    <step>
        <message>Now turn the master alternator switch on.</message>
        <view>
            <heading-offset-deg>12.2</heading-offset-deg>
            <pitch-offset-deg>-35.2</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.3</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>35.0</field-of-view>
        </view>
        <marker>
            <x-m>-0.3375</x-m>
            <y-m>-0.4142</y-m>
            <z-m>-0.2242</z-m>
            <scale>1.6333</scale>
        </marker>
        <set>
            <property>/sim/model/hide-yoke</property>
            <value>true</value>
        </set>

        <error>
            <message>Click the alternator master switch to turn it on.</message>
            <condition>
                <not>
                    <property>/controls/switches/master-alt</property>
                </not>
            </condition>
        </error>

        <exit>
            <condition>
                <property>/controls/switches/master-alt</property>
            </condition>
        </exit>
    </step>

    <step>
        <message>Finally, switch on the master avionics...</message>
        <view>
            <heading-offset-deg>12.2</heading-offset-deg>
            <pitch-offset-deg>-35.2</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.3</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>35.0</field-of-view>
        </view>
        <marker>
            <x-m>-0.3500</x-m>
            <y-m>-0.3233</y-m>
            <z-m>-0.2583</z-m>
            <scale>1.6333</scale>
        </marker>

        <error>
            <message>Flip the master avionics switch...</message>
            <condition>
                <equals>
                    <property>/controls/switches/master-avionics</property>
                    <value>0</value>
                </equals>
            </condition>
        </error>

        <exit>
            <condition>
                <equals>
                    <property>/controls/switches/master-avionics</property>
                    <value>1</value>
                </equals>
            </condition>
        </exit>
    </step>

    <step>
        <message>... and the navigation lights, too</message>
        <view>
            <heading-offset-deg>347.6</heading-offset-deg>
            <pitch-offset-deg>-29.9</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.3</x-offset-m>
            <y-offset-m>-0.0</y-offset-m>
            <z-offset-m>0.2</z-offset-m>
            <field-of-view>45.3</field-of-view>
        </view>
        <marker>
            <x-m>-0.3579</x-m>
            <y-m>-0.1785</y-m>
            <z-m>-0.2653</z-m>
            <scale>1.0992</scale>
        </marker>
        <error>
            <message>Switch on the Nav lights!</message>
            <condition>
                <not>
                    <property>/controls/lighting/nav-lights</property>
                </not>
            </condition>
        </error>
        <exit>
            <condition>
                <property>/controls/lighting/nav-lights</property>
            </condition>
        </exit>
    </step>

    <step>
        <message>Great, our lesson is complete. We're now ready to taxi to the runway.</message>
        <set>
            <property>/sim/model/hide-yoke</property>
            <value>false</value>
        </set>
        <view>
            <heading-offset-deg>360.0</heading-offset-deg>
            <pitch-offset-deg>-10.0</pitch-offset-deg>
            <roll-offset-deg>0.0</roll-offset-deg>
            <x-offset-m>-0.2</x-offset-m>
            <y-offset-m>0.2</y-offset-m>
            <z-offset-m>0.4</z-offset-m>
            <field-of-view>60.0</field-of-view>
        </view>
    </step>

</PropertyList>