Start Up Before you go flying, you'll need to learn how to start the engines. This tutorial will take you through starting the Cessna 172p.

Tutorials/startup

morning

LELL

-9999

41.52158426

2.100607724

/sim/model/c172p/brake-parking 1 /controls/flight/flaps 0.0 /controls/switches/magnetos 0 /controls/engines/current-engine/throttle 0.0 /engines/active-engine/running false /instrumentation/adf/frequencies/selected-khz 367 /environment/weather-scenario Fair weather /controls/flight/elevator-trim 0.17 /consumables/fuel/tank[0]/selected true /consumables/fuel/tank[1]/selected true /controls/anti-ice/engine/carb-heat false /controls/switches/master-avionics false /controls/switches/master-bat false /controls/switches/master-alt false /controls/lighting/taxi-light false /controls/lighting/landing-lights false /controls/anti-ice/pitot-heat false /controls/lighting/nav-lights false /controls/lighting/beacon false /controls/lighting/strobe false /controls/lighting/instruments-norm 0 /controls/engines/engine/primer 0 /controls/engines/engine/primer-lever false /sim/model/door-positions/baggageDoor/position-norm 0 /sim/model/door-positions/leftDoor/position-norm 0 /sim/model/door-positions/rightDoor/position-norm 0 /sim/model/c172p/securing/chock false /sim/model/c172p/securing/tiedownL-visible false /sim/model/c172p/securing/tiedownR-visible false /sim/model/c172p/securing/tiedownT-visible false /sim/model/c172p/securing/pitot-cover-visible false sim/model/c172p/engine_flag_0 1 sim/model/c172p/engine_flag_1 0 /controls/engines/active-engine 0 sim/model/c172p/bushkit_flag_0 1 sim/model/c172p/bushkit_flag_1 0 sim/model/c172p/bushkit_flag_2 0 sim/model/c172p/bushkit_flag_3 0 sim/model/c172p/bushkit_flag_4 0 fdm/jsbsim/bushkit 0 /sim/model/c172p/cockpit/control-lock-placed false /sim/model/c172p/cockpit/control-lock-visible false After finishing the Preflight Inspection you're now ready to learn how to start the engine.

0.0

-12

0.0

-0.21

0.19

73.6

7 Verify that the parking brake is still set.

1.3

-41.9

0.0

-0.2

0.2

0.4

50.1

-0.3092

-0.1992

-0.3284

3.4667 Set the parking brake. sim/model/c172p/brake-parking sim/model/c172p/brake-parking Check that all circuit breakers are in. /sim/model/hide-yoke true

0.9

-29.9

0.0

-0.2

-0.1

0.1

42.4

Push the AIR COND-breaker in. /controls/circuit-breakers/aircond Push the AUTOPILOT-breaker in. /controls/circuit-breakers/autopilot Push the BCN LT-breaker in. /controls/circuit-breakers/bcnlt Push the FLAP-breaker in. /controls/circuit-breakers/flaps Push the INST-breaker in. /controls/circuit-breakers/instr Push the INT LT-breaker in. /controls/circuit-breakers/intlt Push the LDG LT-breaker in. /controls/circuit-breakers/landing Push the ALT-breaker in. /controls/circuit-breakers/master Push the NAV LT-breaker in. /controls/circuit-breakers/navlt Push the PITOT HT-breaker in. /controls/circuit-breakers/pitot-heat Push the RADIO 1-breaker in. /controls/circuit-breakers/radio1 Push the RADIO 2-breaker in. /controls/circuit-breakers/radio2 Push the RADIO 3-breaker in. /controls/circuit-breakers/radio3 Push the RADIO 4-breaker in. /controls/circuit-breakers/radio4 Push the RADIO 5-breaker in. /controls/circuit-breakers/radio5 Push the STRB LT-breaker in. /controls/circuit-breakers/strobe Push the TURN COORD-breaker in. /controls/circuit-breakers/turn-coordinator /controls/circuit-breakers/aircond /controls/circuit-breakers/autopilot /controls/circuit-breakers/bcnlt /controls/circuit-breakers/flaps /controls/circuit-breakers/instr /controls/circuit-breakers/intlt /controls/circuit-breakers/landing /controls/circuit-breakers/master /controls/circuit-breakers/navlt /controls/circuit-breakers/pitot-heat /controls/circuit-breakers/radio1 /controls/circuit-breakers/radio2 /controls/circuit-breakers/radio3 /controls/circuit-breakers/radio4 /controls/circuit-breakers/radio5 /controls/circuit-breakers/strobe /controls/circuit-breakers/turn-coordinator Prime the engine.

29.3

-29.6

0.0

-0.2

-0.1

0.1

48.4

-0.3198

-0.4298

-0.2587

0.5868 Prime the engine a bit more!

/controls/engines/engine[0]/primer 3

/controls/engines/engine[0]/primer-lever The Carburetor Heat must be cold.

349.7

-27.9

0.0

-0.1

0.1

48.4

-0.2769

-0.0917

-0.1959

0.5868 Set the Carburetor to cold! /controls/engines/current-engine/carb-heat /controls/engines/current-engine/carb-heat Make sure fuel mixture is set to fully rich.

346.8

-25.8

0.0

-0.2

0.2

0.4

62.3

-0.3000

0.0800

-0.2050

3.0000 Use the m key or mouse to select fuller mixture.

/controls/engines/current-engine/mixture 0.85

Open the throttle slightly. Use your joystick throttle control, or PgUp to increase throttle to about 20%.

346.8

-25.8

0.0

-0.2

0.2

0.4

62.3

-0.3342

-0.0027

-0.2289

3.1156 Push in the throttle using PgUp, or your joystick throttle control. Open the throttle a bit more.

/controls/engines/current-engine/throttle 0.15

That's a bit too much. Pull it out slightly using your joystick throttle control, or PgDn. That's a bit too much - pull it out slightly.

/controls/engines/current-engine/throttle 0.25

/controls/engines/current-engine/throttle 0.15

/controls/engines/current-engine/throttle 0.25

Turn the master switch on.

12.2

-35.2

0.0

-0.2

0.3

0.4

35.0

-0.3000

-0.3858

-0.1917

1.9333 /sim/model/hide-yoke true Click the battery master switch to turn it on. /controls/switches/master-bat /controls/switches/master-bat Switch on the beacon.

347.6

-29.9

0.0

-0.3

-0.0

0.2

45.3

-0.3579

-0.1537

-0.2653

1.0992 You have to warn everyone that you're about to start the engine so switch on the beacon now! /controls/lighting/beacon /controls/lighting/beacon Now, we'll check no-one is about to walk into our propeller. 2

44.0

-15.7

0.0

-0.2

0.3

0.4

55.0

Looks clear. 2

296.6

-10.4

0.0

-0.2

0.3

0.4

55.0

We need to switch on the magnetos. Click the middle hotspot three times, or use your mouse scroll wheel, so the key is set to BOTH.

12.2

-35.2

0.0

-0.2

0.3

0.4

35.0

-0.3689

-0.3663

-0.2985

3.0000 Click the middle hotspot three times, so both magnetos are on and the key is set to BOTH.

/controls/switches/magnetos 3

/controls/switches/magnetos 3 Finally, we can start the engine. Hold down s, or the right hotspot until the engine catches.

12.2

-35.2

0.0

-0.2

0.3

0.4

35.0

-0.3689

-0.3663

-0.2985

3.0000 Wrong way - set the magnetos back to BOTH. You need the magnetos on to start the engine. Set them to BOTH by clicking the middle hotspot or pressing ].

/controls/switches/magnetos 3

/engines/active-engine/running 1 Great, the engine is running. Adjust the throttle so we're running at between 800 and 1000 RPM.

360.0

-23.0

0.0

-0.2

0.2

0.4

60.0

-0.3791

-0.3089

-0.1320

3.8622 /sim/panel-hotspots false You can release the starter motor now - the engine is running /controls/switches/starter true That's a bit high. Reduce throttle to below 1000 RPM using PgDn, or your joystick throttle control.

/engines/active-engine/rpm 1000.0

That's too low. Increase throttle to above 800 RPM with PgUp, or your joystick throttle control.

/engines/active-engine/rpm 800.0

/engines/active-engine/rpm 800

/engines/active-engine/rpm 1000

Check the oil pressure.

10.7

-13.9

0.0

-0.3

-0.0

0.2

45.3

-0.3628

-0.3876

-0.0587

1.1322 5 Now turn the master alternator switch on.

12.2

-35.2

0.0

-0.2

0.3

0.4

35.0

-0.3375

-0.4142

-0.2242

1.6333 /sim/model/hide-yoke true Click the alternator master switch to turn it on. /controls/switches/master-alt /controls/switches/master-alt Finally, switch on the master avionics...

12.2

-35.2

0.0

-0.2

0.3

0.4

35.0

-0.3500

-0.3233

-0.2583

1.6333 Flip the master avionics switch... /controls/switches/master-avionics 0 /controls/switches/master-avionics 1 ... and the navigation lights, too

347.6

-29.9

0.0

-0.3

-0.0

0.2

45.3

-0.3579

-0.1785

-0.2653

1.0992 Switch on the Nav lights! /controls/lighting/nav-lights /controls/lighting/nav-lights Great, our lesson is complete. We're now ready to taxi to the runway. /sim/model/hide-yoke false

360.0

-10.0

0.0

-0.2

0.2

0.4

60.0