fly/fgdata
1
0
Fork 0
Code Activity
3968 commits 7 branches 0 tags 4.4 GiB
Commit graph

1018 commits

Author SHA1 Message Date
curt
1f00dadc43 Sébastien MARQUE: 
The zkv500 is now repaired (see attached patch) at least for turnpoint mode.
I'm quite sure there will have problem some problems with route management,
I haven't tested yet, but I'll do this week-end.

I've also fixed the screen refresh frequency, which is now more regular.
 2009-10-30 18:39:12 +00:00
daveluff
ca6fb8a271 Remove some junk characters from the upper half of the ASCII table, and convert a few stray tabs to spaces. This is only a cleanup - no values are changed. 2009-10-17 15:04:44 +00:00
jmt
69edaea2f4 Dave Perry: 
Added GS out of range flag to Instruments-3d/vor.

Century III upgrades
 1.  Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30.
 2.  Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
 2009-09-18 08:58:10 +00:00
sydadams
dfcae6b00f added mousewheel action to knobs 2009-09-17 21:02:05 +00:00
sydadams
1fc72cdd84 restored DME/RNAV distance display 2009-09-17 20:49:43 +00:00
sydadams
f0df2324d8 Added shift-LMB to the volume knob for the push-pull ident 2009-09-17 07:44:39 +00:00
sydadams
2aba2cd493 fixed frequency tranfer to nav when tuning on unused channel 2009-09-17 07:18:13 +00:00
sydadams
255d3f2790 removed obsolete file 2009-09-16 19:49:51 +00:00
sydadams
9e89aa315b pick animation updates 2009-09-16 17:40:46 +00:00
sydadams
f14087c807 code cleanup 2009-09-16 06:08:53 +00:00
jmt
310c375ebc PA-24 and PA-26 glideslope fixes from Dave Perry, including updated autopilot gains. 2009-09-13 08:10:56 +00:00
jmt
4678f67cb2 Initial work on standardising glideslope needle behaviour in aircraft. C172P works (including KAP140 APPR capture), and Primus-1000 based aircraft display correctly. 2009-09-09 10:49:36 +00:00
abory
9f28c3d5a9 - Alexis Bory: Added Mirage F1. 2009-08-31 20:30:50 +00:00
sydadams
a8c7c8080f fixed off center volume knob 2009-08-31 05:23:49 +00:00
sydadams
d7329ce4e0 transponder controller animation update 2009-08-09 21:25:07 +00:00
sydadams
f507db7113 fixed the CTL-62 - morse ident wasn't enabled 2009-07-15 04:17:15 +00:00
sydadams
90ac94548a flight timer update: 
activates at airspeed > 30 , shuts off at < 30
displays minutes:seconds up to 59:59 ,
then switches to hours:minutes
 2009-06-19 06:17:47 +00:00
tat
ceb41118fe Removed: fcs.nas; Renamed to helicopter-fcs.nas 2009-06-13 15:42:35 +00:00
tat
0fdd5ba0f4 Updated: to the latest fcs.nas; fcs.nas will be removed since it is only for helicopters (not a generic fcs) 2009-06-13 15:38:27 +00:00
tat
51f0a7897a Fixed: wrong usage of _setlistener 2009-06-12 18:00:53 +00:00
helijah
6ca37b3a42 *** empty log message *** 2009-06-11 22:55:36 +00:00
tat
41407b9448 Moved from OH-1/Nasal/fcs.nas, with the following updates: 
Added: Comments and explanations
Added: Backup FCS to fcs.nas
Modified: fcs for switching attitude / rate hold mode on CAS
 2009-06-11 11:52:20 +00:00
abory
2306a8371c - Add f-14b Dual Control. 2009-06-10 20:36:16 +00:00
helijah
a131434679 - fcs.nas generic by Tat 2009-06-09 17:07:47 +00:00
abory
bb061dce5c - Cosmetics. 2009-06-02 16:14:08 +00:00
abory
80bcce215a - Minor fix. 2009-05-30 06:46:21 +00:00
sydadams
d60f9332c6 ambient color fix 2009-05-30 00:55:01 +00:00
sydadams
eabdc4391b fixed reference to rgb files 2009-05-24 19:40:05 +00:00
abory
ad0dfdb64d - Skip testing tankers AGL as they are always high in the sky. Tune low AGL 
correction (better escape chances). Add carrier Vinson.
 2009-05-24 16:45:40 +00:00
abory
33c4c40f26 - Common miniature standby Adi. 2009-05-24 14:39:45 +00:00
abory
0a335cb692 - Common miniature standby ADI. 2009-05-24 14:38:49 +00:00
abory
d8461ddec7 - Update. Radar2 is now devived frm the last f-14b radar version. Added a 
standalone screen and HUD diamond as target marker.
 2009-05-24 13:32:52 +00:00
abory
52471e4666 - The model is now usable with rwr.nas or radar2.nas. ECM properties are now 
written to /instrumentation/radar2 (whenever we use rwr.nas or radar2.nas).
 2009-05-24 12:19:24 +00:00
abory
7d94c45308 - Standalone RWR script for aircrafts which don't radar2.nas features. 2009-05-24 12:16:08 +00:00
torsten
23963ef1c8 radiostack panel: 
- corrected inverted normals
- removed duplicate surfaces
 2009-05-18 20:16:17 +00:00
abory
04bf18553e - New chronometer. 2009-05-18 19:25:31 +00:00
abory
b0348c998a - USAF and USN common barometric altimeter. 2009-05-18 18:42:46 +00:00
abory
50abeffede - RGB replaced by PNG. Fixes colors. 2009-05-15 11:20:39 +00:00
sydadams
41cb0c79b7 updated pick animations , added shift click for ident button action 2009-05-09 02:13:06 +00:00
dfaber
98bead93b7 Some Logos and a generic Logo Submodel 2009-05-06 19:10:14 +00:00
helijah
65732e2376 - change color system 2009-04-29 16:26:31 +00:00
sydadams
2443c2258f material , pick animation update 2009-04-26 19:34:09 +00:00
sydadams
9cd8a18385 changed material 2009-04-26 19:32:40 +00:00
sydadams
ff6ceb0e24 one more material change 2009-04-26 19:32:01 +00:00
sydadams
bff22aee78 added mousewheel action to knobs 2009-04-26 03:35:45 +00:00
sydadams
5725eb5c07 added mouse wheel action to knobs 2009-04-26 03:34:47 +00:00
sydadams
2b6ad4146e fixed a pick animation error 2009-04-26 02:48:08 +00:00
curt
dcb7d9427e Fix the glide slope unavailable/warning flag so it actually works correctly. 2009-04-22 18:15:41 +00:00
curt
6ab2bca4ef Add a variant of the high res c172 rpm gauge that includes a working 
LCD hobbs meter (instead of the previous "static" hobbs meter that was pretty
but didn't ever change.)  This requires some aircraft specific nasal support
since the hobbs meter isn't implemented in the same way on every aircraft:

# initialize the hobbs meter and configure to save every 5 minutes
var hobbs = aircraft.timer.new("/instrumentation/clock/hobbs-meter-sec");
aircraft.data.save(5);
hobbs.stop();

setlistener( "/engines/engine[0]/running",
    func {
	var running = getprop("/engines/engine[0]/running");
	if ( running ) {
	    hobbs.start();
	} else {
	    hobbs.stop();
	}
    }
);
setlistener( "/instrumentation/clock/hobbs-meter-sec",
    func {
	var secs = getprop("/instrumentation/clock/hobbs-meter-sec");
	setprop("/instrumentation/clock/hobbs-meter-hours", secs / 3600);
    },
    1
);
 2009-04-22 18:11:23 +00:00
sydadams
b6ccd90066 texture update 
pick animation update
remove nasal dependency
 2009-04-17 04:19:51 +00:00
sydadams
1336f7b6df Texture change 
pick animation update
remove nasal file dependancy
 2009-04-17 04:17:46 +00:00
ehofman
849cf56a17 Set minthrottle to 0.1 for latest JSBSim engine codec172-sound.xml 2009-04-13 11:47:06 +00:00
ehofman
c935f28f90 reinstate full tyre squeal effects 2009-04-13 11:46:25 +00:00
ehofman
9638e5f1aa make the tire squeal audiable again. Need to find out why it doesn't work otherwise. 2009-04-13 10:01:03 +00:00
sydadams
6ed10f3005 the primus now needs a systems/electrical/outputs/efis for power source 2009-04-13 04:42:50 +00:00
mfranz
b7098b0bda Dave PERRY: pa24/instruments-3d: ambient & transparency fixes 
- Corrects ambient for pa24-250 oat and radio stack .ac files.
- Removes osg transparency artifacts for Century III mode switch.
 2009-03-25 19:07:20 +00:00
mfranz
073c711b89 Dave PERRY: fix ambient grey-out and texture for the pa24 yoke 2009-03-23 20:47:07 +00:00
mfranz
5cb5b0bc7e Dave PERRY: ambient color fixes 2009-03-21 21:11:55 +00:00
abory
54691b8309 - Check for NaN or neg values before math.sqrt(). 2009-03-21 17:17:18 +00:00
torsten
434a25d329 - change amb color 2009-03-20 08:49:15 +00:00
sydadams
ee515653aa ambient material update 2009-03-20 05:23:17 +00:00
sydadams
ca2f7d3ccd ambient material fix 2009-03-20 05:09:01 +00:00
sydadams
f3f633218c ambient material , pick animation, rgb to png update 2009-03-20 04:58:59 +00:00
sydadams
3f575ae9e8 fixed ambient material 2009-03-20 04:34:17 +00:00
sydadams
bb40350be2 fix ambient material and replace rgb with png texture 2009-03-20 03:41:06 +00:00
sydadams
efc039a2ed ambient material update 2009-03-20 03:20:29 +00:00
frohlich
b74fcbdc15 Set the ambient color equal to the rgb color. 
This is what currently is done in flightgears model loading stage anyway.

Modified Files:
 	Instruments/dme/dme.xml Instruments/kr87-adf/ki227_228.ac
 	Models/c172p.ac
 2009-03-19 08:17:27 +00:00
sydadams
46e7fcffe6 added flight timer ... 2009-03-19 06:54:21 +00:00
sydadams
77d976ef40 set elapsed time to start-stop with the CTL button 2009-03-19 04:08:44 +00:00
sydadams
1b6b77d788 Bring M877 clock up to speed ... 2009-03-18 03:37:52 +00:00
mfranz
96992eef67 don't start with "camera view", as the radar doesn't work there at the moment 2009-03-17 22:37:19 +00:00
mfranz
ed28a5efda model export: only report success on success :-) 2009-03-06 20:47:44 +00:00
torsten
0174df9bd6 improved KR87 ADF: nicer texture, pick animation 
removed unused files
 2009-03-06 12:50:05 +00:00
torsten
8f29103bbe - use named arg instead of arg[n] 
- save state to aircraft.data
 2009-03-06 12:42:34 +00:00
mfranz
719c2f4610 replace deprecated io.isdir(stat[2]) by stat[11] == "dir" 2009-02-15 20:49:16 +00:00
mfranz
e32cdecf37 replace deprecated io.isdir(stat[2]) by stat[11] == "dir" 2009-02-15 20:41:22 +00:00
sydadams
58d629ed13 Display , hotspot update 2009-02-15 09:32:11 +00:00
mfranz
5bc6fb2c62 - make it resizable 
- cleanup
 2009-02-09 22:27:26 +00:00
torsten
44434783c8 remove SenecaII dependencies 2009-02-09 15:32:03 +00:00
mfranz
959354c2aa Dave PERRY: improve the pa24 yoke to match aircraft interior photos 2009-02-08 21:42:36 +00:00
torsten
6feca1bda5 *** empty log message *** 2009-02-04 20:43:59 +00:00
ehofman
dbd3cf8a5a Sync. with JSBSim CVS 2009-01-26 20:37:19 +00:00
vmmeazza
aa96adf5a0 Remove leading "/" 2009-01-16 17:02:41 +00:00
mfranz
071eb664f8 export to a place where the security code actually allows it 2009-01-10 16:51:26 +00:00
vmmeazza
e27e1a73d8 Add Alexis Bory's nice glass shader texture for general use 2009-01-05 17:31:58 +00:00
stuart
3f99696e59 Add pre-takeoff tutorial, and fix some minor mistakes in other tutorials. 2009-01-04 22:07:33 +00:00
sydadams
c641c5306b glideslope pointer adjustment 2009-01-03 05:33:44 +00:00
stuart
997cbfc50a Split up tutorials into separate files, and add new tutorials for the c172p. 2008-12-31 16:25:45 +00:00
mfranz
a539007e3b remove unused file 2008-12-22 22:07:15 +00:00
martin
4b1b409f6f Heiko Schulz: 
Remove obsolete duplication.
 2008-12-13 22:24:37 +00:00
torsten
748ad889d4 Provide a proper(?) initialization of kma20 switches. 2008-12-12 10:58:26 +00:00
sydadams
ded0767b95 resized altitude ribbon texture .... was above 2048 size limit... 
Changed RAlt indicator range from 0-2500 ft to the correct 0-550 ft...
 2008-12-09 07:37:22 +00:00
sydadams
913635c47b Primus updates ... moving copies out of the Bravo and CitationX for easier management... 2008-12-08 02:49:08 +00:00
torsten
8ac84a94a9 New livery. In memory of D-ENMU 2008-12-06 15:42:00 +00:00
torsten
865441a597 swapped upper and lower kx165, so com1 is above com2 2008-12-06 11:41:41 +00:00
torsten
80268b4b48 - Added new intrument: ki266 dme indicator 2008-12-05 19:54:50 +00:00
torsten
5fa71805f9 - Added new intrument: ki266 dme indicator 
- Use global kx165 nav/com radios, not local copy
- minor repositioning of kap140
 2008-12-05 19:54:00 +00:00
torsten
75bb083354 New instrument: ki266 dme indicator 2008-12-05 19:51:42 +00:00
torsten
aaf625446e disable display when electrical /systems/electrical/output/dme is false 2008-12-05 19:50:00 +00:00
torsten
8b1b4b8d68 Added new intrument: kma20 Marker/Audio panel 2008-12-05 14:07:22 +00:00