fly/fgdata
1
0
Fork 0
Code Activity
fgdata/Aircraft-yasim/dc3.xml

125 lines
6.3 KiB
XML
Raw Normal View History

Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
<airplane mass="16865">
<approach speed="58" aoa="13">
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-setting axis="/controls/engines/engine[0]/throttle" value="0.4"/>
<control-setting axis="/controls/engines/engine[1]/throttle" value="0.4"/>
<control-setting axis="/controls/engines/engine[0]/mixture" value="1.0"/>
<control-setting axis="/controls/engines/engine[1]/mixture" value="1.0"/>
<control-setting axis="/controls/engines/engine[0]/propeller-pitch" value="0.5"/>
<control-setting axis="/controls/engines/engine[1]/propeller-pitch" value="0.5"/>
<control-setting axis="/contorls/flight/flaps" value="1.0"/>
<control-setting axis="/controls/gear/gear-down" value="1"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</approach>
<cruise speed="180" alt="23200">
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-setting axis="/controls/engines/engine[0]/throttle" value="1.0"/>
<control-setting axis="/controls/engines/engine[1]/throttle" value="1.0"/>
<control-setting axis="/controls/engines/engine[0]/mixture" value="1.0"/>
<control-setting axis="/controls/engines/engine[1]/mixture" value="1.0"/>
<control-setting axis="/controls/engines/engine[0]/propeller-pitch" value="1.0"/>
<control-setting axis="/controls/engines/engine[1]/propeller-pitch" value="1.0"/>
<control-setting axis="/controls/engines/engine[0]/boost" value="1.0"/>
<control-setting axis="/controls/engines/engine[1]/boost" value="1.0"/>
<control-setting axis="/contorls/flight/flaps" value="0.0"/>
<control-setting axis="/controls/gear/gear-down" value="0"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</cruise>
<cockpit x="-1.63" y="0.41" z="0.76"/>
<fuselage ax="0" ay="0" az="0" bx="-19.75" by="0" bz="0"
width="2" taper="0.5" midpoint="0.25"/>
Fix from Dave Perry. The wing Z coordinate was inverted in the original version. This is a low wing aircraft. ;)
2002-08-30 18:28:52 +00:00
<wing x="-7.02" y="1.09" z="-0.95" length="11.58" camber="0.1"
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
chord="4.77" taper=".286" sweep="19" dihedral="4">
Lots of configuration work from Dave Perry. Moving the C.G. forward makes ground handling more realistic -- the tail comes off earlier due to stability effects, and the extra aerodynamic stability (and the extended rudder arm) makes the aircraft more controllable and less likely to ground loop.
2002-08-28 17:02:38 +00:00
<stall aoa="14" width="6" peak="1.5"/>
Flap drag fixes. The meaning of the drag number has changed, so the values must too.
2002-06-15 03:40:46 +00:00
<flap0 start="0.04" end="0.38" lift="1.5" drag="1.2"/>
<flap1 start="0.38" end="0.97" lift="1.2" drag="1.2"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-input axis="/contorls/flight/flaps" control="FLAP0"/>
<control-input axis="/controls/flight/aileron" control="FLAP1" split="true"/>
<control-input axis="/controls/flight/aileron-trim" control="FLAP1" split="true"/>
Andy sez: I just checked in YASim changes that allow for more cleaner export of control output to the property tree (and flaps now extend slowly now, to boot). But this breaks the XML syntax in an incompatible way, so you'll need to update your planes in order to run the code in CVS.
2002-03-01 07:27:26 +00:00
<control-output control="FLAP0" prop="/surface-positions/flap-pos-norm"/>
<control-output control="FLAP1" side="left"
prop="/surface-positions/left-aileron-pos-norm"/>
<control-output control="FLAP1" side="right"
prop="/surface-positions/right-aileron-pos-norm"/>
<control-speed control="FLAP0" transition-time="5"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</wing>
More updates from Dave Perry. Fix the tank location to be in the wing (this is the same "wrong sign" issue that affected the wing location). Adjust the ballast accordingly. Tune the surfaces a little bit. Also adjust the location of the tail wheel, presumably to get the on-ground orientation right.
2002-09-03 17:12:33 +00:00
<hstab x="-18.12" y="0.41" z="0.27" length="3.5" effectiveness="3.0"
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
chord="3" taper=".545" sweep="15">
Lots of configuration work from Dave Perry. Moving the C.G. forward makes ground handling more realistic -- the tail comes off earlier due to stability effects, and the extra aerodynamic stability (and the extended rudder arm) makes the aircraft more controllable and less likely to ground loop.
2002-08-28 17:02:38 +00:00
<stall aoa="18" width="3" peak="1.5"/>
Flap drag fixes. The meaning of the drag number has changed, so the values must too.
2002-06-15 03:40:46 +00:00
<flap0 start="0" end="1" lift="1.5" drag="1.2"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-input axis="/controls/flight/elevator" control="FLAP0" effectiveness="1.25"/>
<control-input axis="/controls/flight/elevator-trim" control="FLAP0"/>
Andy sez: I just checked in YASim changes that allow for more cleaner export of control output to the property tree (and flaps now extend slowly now, to boot). But this breaks the XML syntax in an incompatible way, so you'll need to update your planes in order to run the code in CVS.
2002-03-01 07:27:26 +00:00
<control-output control="FLAP0" prop="/surface-positions/elevator-pos-norm"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</hstab>
Lots of configuration work from Dave Perry. Moving the C.G. forward makes ground handling more realistic -- the tail comes off earlier due to stability effects, and the extra aerodynamic stability (and the extended rudder arm) makes the aircraft more controllable and less likely to ground loop.
2002-08-28 17:02:38 +00:00
<vstab x="-18.12" y="0" z="0.95" length="2.72" effectiveness="1.25"
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
chord="3.95" taper=".462" sweep="2">
<stall aoa="14" width="3" peak="1.5"/>
Flap drag fixes. The meaning of the drag number has changed, so the values must too.
2002-06-15 03:40:46 +00:00
<flap0 start="0" end="1" lift="1.5" drag="1.2"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-input axis="/controls/flight/rudder" control="FLAP0" effectiveness="1.25" invert="true"/>
<control-input axis="/controls/flight/rudder-trim" control="FLAP0" invert="true"/>
Andy sez: I just checked in YASim changes that allow for more cleaner export of control output to the property tree (and flaps now extend slowly now, to boot). But this breaks the XML syntax in an incompatible way, so you'll need to update your planes in order to run the code in CVS.
2002-03-01 07:27:26 +00:00
<control-output control="FLAP0" prop="/surface-positions/rudder-pos-norm"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</vstab>
<propeller x="-4.09" y="2.52" z="-0.95"
mass="2000" moment="35" radius="1.4"
eng-power="1200" eng-rpm="2700"
turbo-mul="1.5"
cruise-power="660" cruise-speed="195"
cruise-rpm="2100" cruise-alt="20000"
min-rpm="1600" max-rpm="2700">
<actionpt x="-2.45" y="2.52" z="-0.95"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-input axis="/controls/engines/engine[0]/throttle" control="THROTTLE"/>
<control-input axis="/controls/engines/engine[0]/starter" control="STARTER"/>
<control-input axis="/controls/engines/engine[0]/magnetos" control="MAGNETOS"/>
<control-input axis="/controls/engines/engine[0]/mixture" control="MIXTURE"/>
<control-input axis="/controls/engines/engine[0]/propeller-pitch" control="ADVANCE"/>
<control-input axis="/controls/engines/engine[0]/boost" control="BOOST"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</propeller>
<propeller x="-4.09" y="-2.52" z="-0.95"
mass="2000" moment="-35" radius="1.4"
eng-power="1200" eng-rpm="2700"
turbo-mul="1.5"
cruise-power="660" cruise-speed="195"
cruise-rpm="2100" cruise-alt="20000"
min-rpm="1600" max-rpm="2700">
<actionpt x="-2.45" y="-2.52" z="-0.95"/>
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-input axis="/controls/engines/engine[1]/throttle" control="THROTTLE"/>
<control-input axis="/controls/engines/engine[1]/starter" control="STARTER"/>
<control-input axis="/controls/engines/engine[1]/magnetos" control="MAGNETOS"/>
<control-input axis="/controls/engines/engine[1]/mixture" control="MIXTURE"/>
<control-input axis="/controls/engines/engine[1]/propeller-pitch" control="ADVANCE"/>
<control-input axis="/controls/engines/engine[1]/boost" control="BOOST"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</propeller>
Andy's latest changes to add tail-wheel locking.
2002-05-23 17:34:11 +00:00
<!-- Tail wheel; has castering selectable by a wheel lock -->
More updates from Dave Perry. Fix the tank location to be in the wing (this is the same "wrong sign" issue that affected the wing location). Adjust the ballast accordingly. Tune the surfaces a little bit. Also adjust the location of the tail wheel, presumably to get the on-ground orientation right.
2002-09-03 17:12:33 +00:00
<gear x="-17.3" y="0" z="-0.9" compression="0.2">
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-input axis="/controls/gear/tailwheel-lock" control="CASTERING"/>
Andy's latest changes to add tail-wheel locking.
2002-05-23 17:34:11 +00:00
</gear>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
Recent changes to the gear code caused the DC-3 to fall through the runway and crash on startup. The defaults tend to assume that load is borne in proportion to the gear's distance from the c.g., but taildraggers are more complicated. Increase the spring strength.
2002-12-21 18:43:24 +00:00
<gear x="-6.08" y="2.52" z="-3.49" compression="1" retract-time="7" spring="2">
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-input axis="/controls/gear/parking-brake" control="BRAKE"/>
<control-input axis="/controls/gear/wheel[0]/brake" control="BRAKE"/>
<control-input axis="/controls/gear/gear-down" control="EXTEND"/>
Andy sez: I just checked in YASim changes that allow for more cleaner export of control output to the property tree (and flaps now extend slowly now, to boot). But this breaks the XML syntax in an incompatible way, so you'll need to update your planes in order to run the code in CVS.
2002-03-01 07:27:26 +00:00
<control-speed control="EXTEND" transition-time="7"/>
<control-output control="EXTEND" prop="/gear/gear[0]/position-norm"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</gear>
Recent changes to the gear code caused the DC-3 to fall through the runway and crash on startup. The defaults tend to assume that load is borne in proportion to the gear's distance from the c.g., but taildraggers are more complicated. Increase the spring strength.
2002-12-21 18:43:24 +00:00
<gear x="-6.08" y="-2.52" z="-3.49" compression="1" retract-time="7" spring="2">
Update some YASim models to reflect the new controls changes
2003-04-01 14:29:06 +00:00
<control-input axis="/controls/gear/parking-brake" control="BRAKE"/>
<control-input axis="/controls/gear/wheel[1]/brake" control="BRAKE"/>
<control-input axis="/controls/gear/gear-down" control="EXTEND"/>
Andy sez: I just checked in YASim changes that allow for more cleaner export of control output to the property tree (and flaps now extend slowly now, to boot). But this breaks the XML syntax in an incompatible way, so you'll need to update your planes in order to run the code in CVS.
2002-03-01 07:27:26 +00:00
<control-speed control="EXTEND" transition-time="7"/>
<control-output control="EXTEND" prop="/gear/gear[1]/position-norm"/>
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
</gear>
<!-- From the type certificate: "Fuel capacity: 822 gals. (4 tanks in
center section wing: 2 main including fuel system 210 gals. each
(+48) and 2 aux. 201 gals. each (+83.5)" -->
More updates from Dave Perry. Fix the tank location to be in the wing (this is the same "wrong sign" issue that affected the wing location). Adjust the ballast accordingly. Tune the surfaces a little bit. Also adjust the location of the tail wheel, presumably to get the on-ground orientation right.
2002-09-03 17:12:33 +00:00
<tank x="-7.02" y="0" z="-0.95" capacity="4932"/>
<ballast x="-18.0" y="0.0" z="0.6" mass="-2400"/> <!-- move CG forward -->
Latest YASim updates, adding a DC-3 and Harrier jet.
2001-12-24 12:44:26 +00:00
c310u3a FGFS'ercized by Jim Wilson from a model by Chris Lampard. Jim has managed to track down Chris, who has graciously allowed us to distribute the model under the GPL
2002-03-07 06:09:21 +00:00
</airplane>
Copy permalink