fly/fgdata
1
0
Fork 0
Code Activity
fgdata/gui/dialogs/static-lod.xml

1519 lines
55 KiB
XML
Raw Normal View History

Add a dialog box to adjust LOD ranges.
2003-11-29 14:20:00 +00:00
<?xml version="1.0"?>
<PropertyList>
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
<nasal>
<open>
<![CDATA[
LOD: Increase detailed range to 100km, fix reload when changed
2018-11-01 00:39:18 +00:00
var reload_props = [
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
"/scenery/elevation-mesh/lod-range-factor",
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
"/sim/rendering/static-lod/vegetation-lod-level",
"/sim/rendering/static-lod/line-features-lod-level",
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
"/sim/rendering/static-lod/lod-level[0]/line-features-min-width",
"/sim/rendering/static-lod/lod-level[1]/line-features-min-width",
"/sim/rendering/static-lod/lod-level[2]/line-features-min-width",
"/sim/rendering/static-lod/lod-level[3]/line-features-min-width",
"/sim/rendering/static-lod/lod-level[4]/line-features-min-width",
"/sim/rendering/static-lod/lod-level[5]/line-features-min-width",
"/sim/rendering/static-lod/lod-level[6]/line-features-min-width",
LOD: Increase detailed range to 100km, fix reload when changed
2018-11-01 00:39:18 +00:00
"/sim/rendering/static-lod/rough-delta",
"/sim/rendering/static-lod/bare-delta"];
var reload_vals = {};
foreach (var p; reload_props) {
reload_vals[p] = getprop(p);
}
check_for_reload = func{
var reinit = 0;
foreach (var p; reload_props) {
if (reload_vals[p] != getprop(p)) {
reinit = 1;
}
}
if (reinit) {
fgcommand("reinit", props.Node.new({"subsystem": "scenery"}));
}
};
Don't reload materials on LoD change https://sourceforge.net/p/flightgear/codetickets/2224/ Speculative fix that reloading materials might impact scenery reloading. No reason to reload materials on an LoD change, so removing it.
2020-04-29 21:41:07 +00:00
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
var lodDIALOG = cmdarg();
var dlgLOD = props.Node.new({"dialog-name": "static-lod"});
var ai_mp_bare = gui.findElementByName(lodDIALOG, "aimp-bare");
var ai_mp_bare_label = gui.findElementByName(lodDIALOG, "aimp-bare-label");
var ai_mp_detailed = gui.findElementByName(lodDIALOG, "aimp-detailed");
var ai_mp_detailed_label = gui.findElementByName(lodDIALOG, "aimp-detailed-label");
var current_detailed = nil;
var current_bare = nil;
var current_ai_mp_mode = "";
if (getprop("/sim/rendering/static-lod/aimp-detailed") < 0)
setprop("/sim/gui/dialogs/static-lod/aimp-mp-mode", "High Detail only");
else if (getprop("/sim/rendering/static-lod/aimp-detailed") == getprop("/sim/rendering/static-lod/aimp-bare"))
setprop("/sim/gui/dialogs/static-lod/aimp-mp-mode", "Low Detail only");
else
setprop("/sim/gui/dialogs/static-lod/aimp-mp-mode", "Specify Ranges");
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
# /scenery/elevation-mesh/lod-range-factor is a multiplier on the width of the
# LOD mesh. So an lod-range-factor=2 means that a given LoD mesh will be active
# at 2x the mesh width. L6 mesh is typically 2km. So we present to the user a
# km value and convert to a factor
setprop("/sim/gui/dialogs/static-lod/lod-range-km", getprop("/scenery/elevation-mesh/lod-range-factor") * 2);
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
update_enabling = func{
var mode = getprop("/sim/gui/dialogs/static-lod/aimp-mp-mode");
if (mode == "Low Detail only") {
setprop("/sim/gui/dialogs/static-lod/aimp-mp-bare-enabled", 1);
setprop("/sim/gui/dialogs/static-lod/aimp-mp-detailed-enabled", 0);
} else if (mode == "High Detail only") {
setprop("/sim/gui/dialogs/static-lod/aimp-mp-bare-enabled", 0);
setprop("/sim/gui/dialogs/static-lod/aimp-mp-detailed-enabled", 0);
} else {
setprop("/sim/gui/dialogs/static-lod/aimp-mp-bare-enabled", 1);
setprop("/sim/gui/dialogs/static-lod/aimp-mp-detailed-enabled", 1);
}
# if (!getprop("/sim/rendering/static-lod/aimp-bare") and !getprop("/sim/rendering/static-lod/aimp-detailed")) {
# setprop("/sim/rendering/static-lod/aimp-bare", 0);
# setprop("/sim/rendering/static-lod/aimp-detailed",100);
# }
return mode;
};
reload_sliders = func(reload) {
if (!reload)
return ;
var current_dialog = getprop("/sim/gui/dialogs/current-dialog");
fgcommand("dialog-close", dlgLOD);
fgcommand("dialog-show", dlgLOD);
if (current_dialog != "") {
var show_node = props.Node.new({"dialog-name": current_dialog});
fgcommand("dialog-show", show_node);
}
}
;
update_scenery_text = func{
var detailed = getprop("/sim/rendering/static-lod/detailed");
var bare = getprop("/sim/rendering/static-lod/bare-delta");
var rough = getprop("/sim/rendering/static-lod/rough-delta");
setprop("/sim/rendering/static-lod/detailed-description", sprintf("from %5.0fm to %5.0fm",0, detailed));
setprop("/sim/rendering/static-lod/rough-delta-description", sprintf("from %5.0fm to %5.0fm",detailed, rough+detailed));
setprop("/sim/rendering/static-lod/bare-delta-description", sprintf("from %5.0fm to %5.0fm",rough+detailed,rough+bare+detailed));
};
update_description = func(mode){
var descD = "";
var descB = "";
var descW = "";
if (getprop("sim/rendering/static-lod/aimp-range-mode-distance")) {
if (mode == "Low Detail only") {
if (getprop("/sim/rendering/static-lod/aimp-bare")>0) {
descD = sprintf("visible when viewpoint within\n%.0f meters", getprop("/sim/rendering/static-lod/aimp-detailed"));
} else {
descB = "always visible";
}
} else if (mode == "High Detail only") {
descW = "Always visible regardless of distance";
} else {
descW = "";
descD = sprintf("0 to %.0fm from viewpoint", getprop("/sim/rendering/static-lod/aimp-detailed"));
descB = sprintf("%.0fm to %.0fm", getprop("/sim/rendering/static-lod/aimp-detailed"), getprop("/sim/rendering/static-lod/aimp-detailed")+getprop("/sim/rendering/static-lod/aimp-bare"));
var lowDetailRange = getprop("/sim/rendering/static-lod/aimp-detailed") + getprop("/sim/rendering/static-lod/aimp-bare") ;
if (lowDetailRange < 1000)
descW = sprintf("WARNING: Low Detail too close, nothing drawn over %.0fm", lowDetailRange);
}
} else {
if (mode == "Low Detail only") {
if (getprop("/sim/rendering/static-lod/aimp-bare")>0) {
descD = sprintf("visible when larger than\n%.0f pixels in size on screen", getprop("/sim/rendering/static-lod/aimp-detailed"));
descB = "";
descW = sprintf("WARNING: When smaller than %.0f pixels nothing will be drawn", getprop("/sim/rendering/static-lod/aimp-bare"));
} else {
descW = "";
descD = "";
descB = "always visible";
}
} else if (mode == "High Detail only") {
descW = "Always visible regardless of distance";
} else {
descW = "";
if (getprop("/sim/rendering/static-lod/aimp-bare")>0)
descW = sprintf("WARNING: Below %.0f pixels in size nothing will be drawn", getprop("/sim/rendering/static-lod/aimp-bare"));
descD = sprintf("above %.0f pixels in size", getprop("/sim/rendering/static-lod/aimp-detailed"));
descB = sprintf("above %.0f pixels in size", getprop("/sim/rendering/static-lod/aimp-bare"));
}
}
setprop("/sim/gui/dialogs/static-lod/aimp-detailed-description", descD);
setprop("/sim/gui/dialogs/static-lod/aimp-bare-description", descB);
setprop("/sim/gui/dialogs/static-lod/aimp-bare-description1", descW);
};
# returns non zero if the value was adjusted and it can be adjusted (can_reload)
adjustValue = func(id, nodeId, value, can_reload){
var node = nodeId.getNode(id);
if (node != nil) {
var cv = node.getValue();
if (cv != value) {
node.setValue(value);
if (can_reload)
reload_sliders(1);
}
}
return 0; # no need to reload.
}
update_ai_mp = func(can_reload) {
Don't reload materials on LoD change https://sourceforge.net/p/flightgear/codetickets/2224/ Speculative fix that reloading materials might impact scenery reloading. No reason to reload materials on an LoD change, so removing it.
2020-04-29 21:41:07 +00:00
var mode = update_enabling ();
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
var distance_mode = getprop("sim/rendering/static-lod/aimp-range-mode-distance");
update_description(mode);
if (mode == "Low Detail only") {
setprop("/sim/rendering/static-lod/aimp-detailed",getprop("/sim/rendering/static-lod/aimp-bare"));
can_reload = adjustValue("max", ai_mp_bare, 2000, can_reload);
reload_sliders(can_reload);
} else if (mode == "High Detail only") {
# setprop("/sim/rendering/static-lod/aimp-bare", 0);
# setprop("/sim/rendering/static-lod/aimp-detailed",-1);
} else {
if (!distance_mode) {
if (getprop("/sim/rendering/static-lod/aimp-bare") > getprop("/sim/rendering/static-lod/aimp-detailed")){
setprop("/sim/rendering/static-lod/aimp-bare", getprop("/sim/rendering/static-lod/aimp-detailed")-1 ) ;
}
can_reload = adjustValue("max", ai_mp_detailed, 2000, can_reload);
can_reload = adjustValue("max", ai_mp_bare, getprop("/sim/rendering/static-lod/aimp-detailed"), can_reload);
} else {
can_reload = adjustValue("max", ai_mp_detailed, 3000, can_reload);
can_reload = adjustValue("max", ai_mp_bare, 3000, can_reload);
}
}
}
update_aimp_mode = func{
var new_mode = getprop("/sim/gui/dialogs/static-lod/aimp-mp-mode");
if (new_mode != current_ai_mp_mode) {
Don't reload materials on LoD change https://sourceforge.net/p/flightgear/codetickets/2224/ Speculative fix that reloading materials might impact scenery reloading. No reason to reload materials on an LoD change, so removing it.
2020-04-29 21:41:07 +00:00
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
if (current_ai_mp_mode == "Specify Ranges") {
current_detailed = getprop("/sim/rendering/static-lod/aimp-detailed");
current_bare =getprop("/sim/rendering/static-lod/aimp-bare");
Don't reload materials on LoD change https://sourceforge.net/p/flightgear/codetickets/2224/ Speculative fix that reloading materials might impact scenery reloading. No reason to reload materials on an LoD change, so removing it.
2020-04-29 21:41:07 +00:00
}
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
if (current_ai_mp_mode == "Low Detail only" or current_ai_mp_mode == "High Detail only") {
if (current_detailed != nil)
setprop("/sim/rendering/static-lod/aimp-detailed", current_detailed );
if (current_bare != nil)
setprop("/sim/rendering/static-lod/aimp-bare",current_bare);
}
if (new_mode == "High Detail only") {
setprop("/sim/rendering/static-lod/aimp-detailed", -1);
setprop("/sim/rendering/static-lod/aimp-bare",0);
} else if (new_mode == "Low Detail only"){
setprop("/sim/rendering/static-lod/aimp-detailed", 0);
setprop("/sim/rendering/static-lod/aimp-bare",0);
}
current_ai_mp_mode = new_mode;
}
update_description(update_enabling());
}
# setlistener("/sim/gui/dialogs/static-lod/aimp-mp-mode", func(v){
# },0 ,0);
update_scenery_text ();
update_ai_mp (0);
]]>
</open>
</nasal>
<name>static-lod</name>
<layout>vbox</layout>
<group>
<layout>hbox</layout>
<empty>
<stretch>1</stretch>
</empty>
<text>
<label>Adjust Level Of Detail Ranges</label>
</text>
<empty>
<stretch>1</stretch>
</empty>
<button>
<pref-width>16</pref-width>
<pref-height>16</pref-height>
<legend></legend>
<keynum>27</keynum>
<border>2</border>
<binding>
<command>dialog-close</command>
</binding>
</button>
</group>
<hrule/>
<group>
<layout>table</layout>
<halign>center</halign>
<text>
<row>0</row>
<col>1</col>
<halign>center</halign>
<label>Scenery (Tiles, Buildings, Roads, Railways)</label>
</text>
<text>
<row>1</row>
<col>0</col>
<label>Detailed</label>
</text>
<slider>
<row>1</row>
<col>1</col>
<pref-width>300</pref-width>
<pref-height>14</pref-height>
<name>scenery-detailed</name>
<property>/sim/rendering/static-lod/detailed</property>
<live>1</live>
<min>0</min>
LOD: Increase detailed range to 100km, fix reload when changed
2018-11-01 00:39:18 +00:00
<max>100000</max>
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
<binding>
<command>dialog-apply</command>
<object-name>scenery-detailed</object-name>
</binding>
<binding>
<command>nasal</command>
<script>
<![CDATA[
update_scenery_text();
]]>
</script>
</binding>
</slider>
<text>
<row>1</row>
<col>2</col>
<halign>left</halign>
<label>xxxxxxxxxxxxxxxxxxx</label>
<live>true</live>
<property>/sim/rendering/static-lod/detailed-description</property>
</text>
<!--ROUGH -->
<text>
<row>2</row>
<col>0</col>
<label>Rough</label>
</text>
<slider>
<row>2</row>
<col>1</col>
<pref-width>300</pref-width>
<pref-height>14</pref-height>
<name>scenery-rough</name>
<property>/sim/rendering/static-lod/rough-delta</property>
<live>1</live>
<min>0</min>
<max>200000</max>
<binding>
<command>dialog-apply</command>
<object-name>scenery-rough</object-name>
</binding>
<binding>
<command>nasal</command>
<script>
<![CDATA[
update_scenery_text();
]]>
</script>
</binding>
</slider>
<text>
<row>2</row>
<col>2</col>
<halign>left</halign>
<label>xxxxxxxxxxxxxx</label>
<live>true</live>
<property>/sim/rendering/static-lod/rough-delta-description</property>
</text>
<!--BARE -->
<text>
<row>3</row>
<col>0</col>
<label>Bare</label>
</text>
<slider>
<row>3</row>
<col>1</col>
<pref-width>300</pref-width>
<pref-height>14</pref-height>
<name>scenery-bare</name>
<property>/sim/rendering/static-lod/bare-delta</property>
<live>1</live>
<min>0</min>
<max>200000</max>
<binding>
<command>dialog-apply</command>
<object-name>scenery-bare</object-name>
</binding>
<binding>
<command>nasal</command>
<script>
<![CDATA[
update_scenery_text();
]]>
</script>
</binding>
</slider>
<text>
<row>3</row>
<col>2</col>
<halign>left</halign>
<label>xxxxxxxxxxxxxx</label>
<live>true</live>
<property>/sim/rendering/static-lod/bare-delta-description</property>
</text>
<!-- end bare -->
<!--This is the AI/MP part-->
<hrule>
<row>4</row>
<col>0</col>
<colspan>7</colspan>
</hrule>
<text>
<row>5</row>
<col>1</col>
<halign>center</halign>
<label>AI/MP Aircraft</label>
</text>
<combo>
<row>6</row>
<col>1</col>
<pref-width>200</pref-width>
<name>aimp-mode</name>
<property>/sim/gui/dialogs/static-lod/aimp-mp-mode</property>
<value>Specify Ranges</value>
<value>Low Detail only</value>
<value>High Detail only</value>
<editable>false</editable>
<binding>
<command>dialog-apply</command>
<object-name>aimp-mode</object-name>
</binding>
<binding>
<command>nasal</command>
<script>
<![CDATA[
update_aimp_mode();
]]>
</script>
</binding>
</combo>
<checkbox>
<row>6</row>
<col>2</col>
Don't reload materials on LoD change https://sourceforge.net/p/flightgear/codetickets/2224/ Speculative fix that reloading materials might impact scenery reloading. No reason to reload materials on an LoD change, so removing it.
2020-04-29 21:41:07 +00:00
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
<halign>left</halign>
<name>distance</name>
<property>sim/rendering/static-lod/aimp-range-mode-distance</property>
<live>true</live>
<label>AI/MP in meters</label>
<binding>
<command>property-toggle</command>
<property>sim/rendering/static-lod/aimp-range-mode-distance</property>
<value>0</value>
</binding>
<binding>
<command>nasal</command>
<script>
<![CDATA[
update_ai_mp(0);
]]>
</script>
</binding>
</checkbox>
<!--ai - detail-->
<text>
<row>7</row>
<col>0</col>
<name>aimp-detailed-label</name>
<enable><property>/sim/gui/dialogs/static-lod/aimp-mp-detailed-enabled</property></enable>
<label>High Detail</label>
</text>
<slider>
<row>7</row>
<col>1</col>
<pref-width>300</pref-width>
<pref-height>14</pref-height>
<name>aimp-detailed</name>
<enable><property>/sim/gui/dialogs/static-lod/aimp-mp-detailed-enabled</property></enable>
<property>/sim/rendering/static-lod/aimp-detailed</property>
<live>1</live>
<min>0</min>
<max>1500</max>
<binding>
<command>dialog-apply</command>
<object-name>aimp-detailed</object-name>
</binding>
<binding>
<command>nasal</command>
<script>
<![CDATA[
update_ai_mp(1);
]]>
</script>
</binding>
<binding>
<command>dialog-update</command>
</binding>
</slider>
<text>
<row>7</row>
<col>2</col>
<halign>left</halign>
<label>xxxxxxxxxxxxxxxxxxxxxxxxxx</label>
<live>true</live>
<property>/sim/gui/dialogs/static-lod/aimp-detailed-description</property>
</text>
<!-- end ai detail -->
<!--ai - bare-->
<text>
<name>aimp-bare-label</name>
<enable><property>/sim/gui/dialogs/static-lod/aimp-mp-bare-enabled</property></enable>
<row>8</row>
<col>0</col>
<label>Low Detail</label>
</text>
<slider>
<row>8</row>
<col>1</col>
<enable><property>/sim/gui/dialogs/static-lod/aimp-mp-bare-enabled</property></enable>
<pref-width>300</pref-width>
<pref-height>14</pref-height>
<name>aimp-bare</name>
<property>/sim/rendering/static-lod/aimp-bare</property>
<live>1</live>
<min>0</min>
<max>1500</max>
<binding>
<command>dialog-apply</command>
<object-name>aimp-bare</object-name>
</binding>
<binding>
<command>nasal</command>
<script>
<![CDATA[
update_ai_mp(1);
]]>
</script>
</binding>
<binding>
<command>dialog-update</command>
</binding>
</slider>
<text>
<row>8</row>
<col>2</col>
<halign>left</halign>
<valign>top</valign>
<label>xxxxxxxxxxxxxxxxxxxxxxxxxx</label>
<live>true</live>
<property>/sim/gui/dialogs/static-lod/aimp-bare-description</property>
</text>
<text>
<row>9</row>
<col>1</col>
<halign>left</halign>
<valign>top</valign>
<label>xxxxxxxxxxxxxxxxxxxxxxxxxx</label>
<live>true</live>
<property>/sim/gui/dialogs/static-lod/aimp-bare-description1</property>
</text>
<text>
<row>11</row>
<col>0</col>
<halign>right</halign>
<label>AI/MP Interior</label>
</text>
<slider>
<row>11</row>
<col>1</col>
<pref-width>300</pref-width>
<pref-height>14</pref-height>
<name>aimp-interior</name>
<property>/sim/rendering/static-lod/aimp-interior</property>
<live>1</live>
<min>0</min>
<max>1500</max>
<binding>
<command>dialog-apply</command>
<object-name>aimp-interior</object-name>
</binding>
<!--<binding>
<command>nasal</command>
<script>
<![CDATA[
update_ai_mp(1);
]]>
</script>
</binding>
<binding>
<command>dialog-update</command>
</binding>-->
</slider>
<text>
<row>11</row>
<col>2</col>
<halign>left</halign>
<valign>top</valign>
<label>xxxxxxxxxxxxxxxxxxxxxxxxxx</label>
<format>%.0f </format>
<live>true</live>
<property>/sim/rendering/static-lod/aimp-interior</property>
</text>
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
</group>
<hrule/>
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
<group>
<layout>hbox</layout>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<halign>left</halign>
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
<text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<label>World Scenery 3.0 (Experimental)</label>
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<hrule>
<stretch>true</stretch>
</hrule>
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
</group>
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
<group>
<layout>hbox</layout>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<halign>left</halign>
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
<text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<label>WS3.0 uses 7 levels of detail, from 0 (least detailed) to 6 (most detailed).</label>
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
</group>
<group>
<layout>hbox</layout>
<halign>left</halign>
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
<text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<label>You can control at which level features are rendered and at what range level 6 is used.</label>
WS30 Line Features Move some WS3.0 LoD settings to the static-lod dialog.
2021-02-24 21:57:48 +00:00
</text>
</group>
<group>
<layout>hbox</layout>
<halign>center</halign>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<group>
<layout>table</layout>
<default-padding>4</default-padding>
<valign>center</valign>
<text>
<row>0</row>
<col>0</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<label>Detail range</label>
</text>
<slider>
<name>elev-lod</name>
<row>0</row>
<col>1</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>10.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/scenery/elevation-mesh/lod-range-factor</property>
<binding>
<command>dialog-apply</command>
<object-name>elev-lod</object-name>
</binding>
<binding>
<command>nasal</command>
<script>
# /scenery/elevation-mesh/lod-range-factor is a multiplier on the width of the
# LOD mesh. So an lod-range-factor=2 means that a given LoD mesh will be active
# at 2x the mesh width. L6 mesh is typically 2km. So we present to the user a
# km value and convert to a factor
setprop("/sim/gui/dialogs/static-lod/lod-range-km", getprop("/scenery/elevation-mesh/lod-range-factor") * 2);
</script>
</binding>
</slider>
<text>
<label>1234</label>
<row>0</row>
<col>2</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%dkm</format>
<live>true</live>
<property>/sim/gui/dialogs/static-lod/lod-range-km</property>
</text>
<text>
<row>1</row>
<col>0</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<label>Line Feature minimum LOD</label>
</text>
<slider>
<row>1</row>
<col>1</col>
<name>line-lod</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>0.0</min>
<max>6.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/line-features-lod-level</property>
<binding>
<command>dialog-apply</command>
<object-name>line-lod</object-name>
</binding>
</slider>
<text>
<row>1</row>
<col>2</col>
<label>1</label>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/line-features-lod-level</property>
</text>
<text>
<row>2</row>
<col>0</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<label>Vegetation minimum LOD</label>
</text>
<slider>
<row>2</row>
<col>1</col>
<name>veg-lod</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>0.0</min>
<max>6.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/vegetation-lod-level</property>
<binding>
<command>dialog-apply</command>
<object-name>veg-lod</object-name>
</binding>
</slider>
<text>
<row>2</row>
<col>2</col>
<label>1</label>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/vegetation-lod-level</property>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<text>
<row>3</row>
<col>0</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<label>Area features minimum LOD</label>
</text>
<slider>
<row>3</row>
<col>1</col>
<name>area-lod</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>0.0</min>
<max>6.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/area-features-lod-level</property>
<binding>
<command>dialog-apply</command>
<object-name>area-lod</object-name>
</binding>
</slider>
<text>
<row>3</row>
<col>2</col>
<label>1</label>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/area-features-lod-level</property>
</text>
WS30i: Initial coastlines
2021-05-03 14:47:13 +00:00
<text>
<row>4</row>
<col>0</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<label>Detailed coastline minimum LOD</label>
</text>
<slider>
<row>4</row>
<col>1</col>
<name>coast-lod</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>0.0</min>
<max>6.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/coastline-lod-level</property>
<binding>
<command>dialog-apply</command>
<object-name>coast-lod</object-name>
</binding>
</slider>
<text>
<row>4</row>
<col>2</col>
<label>1</label>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/coastline-lod-level</property>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
</group>
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
</group>
<hrule/>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<group>
<layout>hbox</layout>
<halign>center</halign>
<group>
<layout>table</layout>
<default-padding>4</default-padding>
<valign>center</valign>
<text>
<row>0</row>
<col>0</col>
<label>LOD Level</label>
</text>
<text>
<row>0</row>
<col>1</col>
<colspan>2</colspan>
<label>Minimum Line Feature Width (m)</label>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<text>
<row>0</row>
<col>3</col>
<colspan>2</colspan>
<label>Minimum Area Feature Area (m^2)</label>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<text>
<row>1</row>
<col>0</col>
<label>0</label>
</text>
<slider>
<row>1</row>
<col>1</col>
<name>line-width-lod0</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>50.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[0]/line-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>line-width-lod0</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>1</row>
<col>2</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[0]/line-features-min-width</property>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<slider>
<row>1</row>
<col>3</col>
<name>area-lod0</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>10000.0</max>
<step>100.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[0]/area-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>area-lod0</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>1</row>
<col>4</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[0]/area-features-min-width</property>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<text>
<row>2</row>
<col>0</col>
<label>1</label>
</text>
<slider>
<row>2</row>
<col>1</col>
<name>line-width-lod1</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>50.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[1]/line-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>line-width-lod1</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>2</row>
<col>2</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[1]/line-features-min-width</property>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<slider>
<row>2</row>
<col>3</col>
<name>area-lod1</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>10000.0</max>
<step>100.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[1]/area-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>area-lod1</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>2</row>
<col>4</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[1]/area-features-min-width</property>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<text>
<row>3</row>
<col>0</col>
<label>2</label>
</text>
<slider>
<row>3</row>
<col>1</col>
<name>line-width-lod2</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>50.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[2]/line-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>line-width-lod2</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>3</row>
<col>2</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[2]/line-features-min-width</property>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<slider>
<row>3</row>
<col>3</col>
<name>area-lod2</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>10000.0</max>
<step>100.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[2]/area-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>area-lod2</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>3</row>
<col>4</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[2]/area-features-min-width</property>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<text>
<row>4</row>
<col>0</col>
<label>3</label>
</text>
<slider>
<row>4</row>
<col>1</col>
<name>line-width-lod3</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>50.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[3]/line-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>line-width-lod3</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>4</row>
<col>2</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[3]/line-features-min-width</property>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<slider>
<row>4</row>
<col>3</col>
<name>area-lod3</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>10000.0</max>
<step>100.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[3]/area-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>area-lod2</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>4</row>
<col>4</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[3]/area-features-min-width</property>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<text>
<row>5</row>
<col>0</col>
<label>4</label>
</text>
<slider>
<row>5</row>
<col>1</col>
<name>line-width-lod4</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>50.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[4]/line-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>line-width-lod4</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>5</row>
<col>2</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[4]/line-features-min-width</property>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<slider>
<row>5</row>
<col>3</col>
<name>area-lod4</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>10000.0</max>
<step>100.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[4]/area-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>area-lod4</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>5</row>
<col>4</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[4]/area-features-min-width</property>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<text>
<row>6</row>
<col>0</col>
<label>5</label>
</text>
<slider>
<row>6</row>
<col>1</col>
<name>line-width-lod5</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>50.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[5]/line-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>line-width-lod5</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>6</row>
<col>2</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[5]/line-features-min-width</property>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<slider>
<row>6</row>
<col>3</col>
<name>area-lod5</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>10000.0</max>
<step>100.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[5]/area-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>area-lod5</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>6</row>
<col>4</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[5]/area-features-min-width</property>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
<text>
<row>7</row>
<col>0</col>
<label>6</label>
</text>
<slider>
<row>7</row>
<col>1</col>
<name>line-width-lod6</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>50.0</max>
<step>1.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[6]/line-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>line-width-lod6</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>7</row>
<col>2</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[6]/line-features-min-width</property>
</text>
WS30: LoD settings for water bodies.
2021-04-04 15:36:06 +00:00
<slider>
<row>7</row>
<col>3</col>
<name>area-lod6</name>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<min>1.0</min>
<max>10000.0</max>
<step>100.0</step>
<fraction>0.17</fraction>
<property>/sim/rendering/static-lod/lod-level[6]/area-features-min-width</property>
<binding>
<command>dialog-apply</command>
<object-name>area-lod6</object-name>
</binding>
</slider>
<text>
<label>12</label>
<row>7</row>
<col>4</col>
<enable>
<equals>
<property>/scenery/use-vpb</property>
<value>true</value>
</equals>
</enable>
<format>%d</format>
<live>true</live>
<property>/sim/rendering/static-lod/lod-level[6]/area-features-min-width</property>
</text>
WS30: LOD Range GUI for WS3.0 GUI changes to allow control of line feature rendering and provide a more intuitive UI for other WS3.0 parameters
2021-03-07 19:29:39 +00:00
</group>
</group>
<hrule/>
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
<group>
<layout>hbox</layout>
<default-padding>10</default-padding>
<empty>
<stretch>true</stretch>
</empty>
<button>
<legend>OK</legend>
<default>true</default>
<equal>true</equal>
<binding>
<command>dialog-apply</command>
</binding>
<binding>
<command>nasal</command>
<script>
<![CDATA[
LOD: Increase detailed range to 100km, fix reload when changed
2018-11-01 00:39:18 +00:00
check_for_reload();
]]>
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
</script>
</binding>
<binding>
<command>dialog-close</command>
</binding>
</button>
<empty>
<stretch>true</stretch>
</empty>
<button>
<legend>Apply</legend>
<equal>true</equal>
<binding>
<command>dialog-apply</command>
</binding>
LOD: Increase detailed range to 100km, fix reload when changed
2018-11-01 00:39:18 +00:00
<binding>
<command>nasal</command>
<script>
<![CDATA[
check_for_reload();
]]>
</script>
</binding> </button>
LOD dialogs rework. Big rework of the Adjust LOD ranges dialog to hopefully make it easier to understand, and harder to setup so that models aren't visible by accident. All range entry is now via sliders. The sliders are deltas from the previous value. There is now the option to specifically choose either low detail or high detail AI/MP models. *NOTE* that for models without a fallback index the low detail model will be the blue yellow glider. There is now clear indication of what happens for the Meters or Pixel modes. Added a defaults button that will restore a reasonable set of default values. The properties that were used have been renamed to ensure that sensible defaults will be picked, ideally we'd have a way to migrate things like this but I don't think we do, so this is a reasonable alternative.
2018-10-30 19:19:10 +00:00
<empty>
<stretch>true</stretch>
</empty>
<button>
<legend>Defaults</legend>
<equal>true</equal>
<!--end reset for pixel mode-->
<binding>
<command>nasal</command>
<script>
<![CDATA[
setprop("/sim/gui/dialogs/static-lod/aimp-mp-mode", "Specify Ranges");
setprop("/sim/rendering/static-lod/detailed",1500);
setprop("/sim/rendering/static-lod/rough-delta",7500);
setprop("/sim/rendering/static-lod/bare-delta",21000);
if (getprop("sim/rendering/static-lod/aimp-range-mode-distance")){
# Reset for meters
setprop("/sim/rendering/static-lod/aimp-detailed",500);
setprop("/sim/rendering/static-lod/aimp-bare",2000);
setprop("/sim/rendering/static-lod/aimp-interior",50);
} else {
# Reset for pixel mode
setprop("/sim/rendering/static-lod/aimp-detailed",400);
setprop("/sim/rendering/static-lod/aimp-bare",0);
setprop("/sim/rendering/static-lod/aimp-interior",200);
}
update_description(update_enabling());
reload_sliders(1);
]]>
</script>
</binding>
</button>
<empty>
<stretch>true</stretch>
</empty>
<button>
<legend>Close</legend>
<key>Esc</key>
<binding>
<command>dialog-close</command>
</binding>
</button>
</group>
Make LOD for trees/buildings/objects/STG configurable. Now based on /sim/rendering/static-lod/rough. This commit removes a large number of range settings that should in general be set by the user.
2016-04-08 21:39:29 +00:00
Add a dialog box to adjust LOD ranges.
2003-11-29 14:20:00 +00:00
</PropertyList>
Copy permalink