2017-04-05 22:36:27 +00:00
# Aircraft Config Center
# Joshua Davidson (it0uchpods)
2019-01-01 06:03:06 +00:00
# Copyright (c) 2019 Joshua Davidson (it0uchpods)
2017-07-13 17:30:33 +00:00
2017-06-07 18:58:49 +00:00
var spinning = maketimer(0.05, func {
2017-05-29 16:30:05 +00:00
var spinning = getprop("/systems/acconfig/spinning");
if (spinning == 0) {
setprop("/systems/acconfig/spin", "\\");
setprop("/systems/acconfig/spinning", 1);
} else if (spinning == 1) {
setprop("/systems/acconfig/spin", "|");
setprop("/systems/acconfig/spinning", 2);
} else if (spinning == 2) {
setprop("/systems/acconfig/spin", "/");
setprop("/systems/acconfig/spinning", 3);
} else if (spinning == 3) {
setprop("/systems/acconfig/spin", "-");
setprop("/systems/acconfig/spinning", 0);
}
});
2017-06-10 15:57:48 +00:00
var failReset = func {
setprop("/systems/failures/elac1", 0);
setprop("/systems/failures/elac2", 0);
setprop("/systems/failures/sec1", 0);
setprop("/systems/failures/sec2", 0);
setprop("/systems/failures/sec3", 0);
setprop("/systems/failures/fac1", 0);
setprop("/systems/failures/fac2", 0);
setprop("/systems/failures/aileron-left", 0);
setprop("/systems/failures/aileron-right", 0);
setprop("/systems/failures/elevator-left", 0);
setprop("/systems/failures/elevator-right", 0);
setprop("/systems/failures/rudder", 0);
2017-06-10 18:17:13 +00:00
setprop("/systems/failures/spoiler-l1", 0);
setprop("/systems/failures/spoiler-l2", 0);
setprop("/systems/failures/spoiler-l3", 0);
setprop("/systems/failures/spoiler-l4", 0);
setprop("/systems/failures/spoiler-l5", 0);
setprop("/systems/failures/spoiler-r1", 0);
setprop("/systems/failures/spoiler-r2", 0);
setprop("/systems/failures/spoiler-r3", 0);
setprop("/systems/failures/spoiler-r4", 0);
setprop("/systems/failures/spoiler-r5", 0);
2017-06-10 15:57:48 +00:00
setprop("/systems/failures/elec-ac-ess", 0);
setprop("/systems/failures/elec-batt1", 0);
setprop("/systems/failures/elec-batt2", 0);
setprop("/systems/failures/elec-galley", 0);
setprop("/systems/failures/elec-genapu", 0);
setprop("/systems/failures/elec-gen1", 0);
setprop("/systems/failures/elec-gen2", 0);
setprop("/systems/failures/bleed-apu", 0);
setprop("/systems/failures/bleed-ext", 0);
setprop("/systems/failures/bleed-eng1", 0);
setprop("/systems/failures/bleed-eng2", 0);
setprop("/systems/failures/pack1", 0);
setprop("/systems/failures/pack2", 0);
setprop("/systems/failures/hyd-blue", 0);
setprop("/systems/failures/hyd-green", 0);
setprop("/systems/failures/hyd-yellow", 0);
setprop("/systems/failures/ptu", 0);
setprop("/systems/failures/pump-blue", 0);
setprop("/systems/failures/pump-green", 0);
setprop("/systems/failures/pump-yellow-eng", 0);
setprop("/systems/failures/pump-yellow-elec", 0);
2017-09-23 01:56:44 +00:00
setprop("/systems/failures/tank0pump1", 0);
setprop("/systems/failures/tank0pump2", 0);
setprop("/systems/failures/tank1pump1", 0);
setprop("/systems/failures/tank1pump2", 0);
2017-07-25 16:21:41 +00:00
setprop("/systems/failures/tank2pump1", 0);
setprop("/systems/failures/tank2pump2", 0);
setprop("/systems/failures/fuelmode", 0);
2017-09-21 19:07:54 +00:00
setprop("/systems/failures/cargo-aft-fire", 0);
setprop("/systems/failures/cargo-fwd-fire", 0);
2017-06-10 15:57:48 +00:00
}
failReset();
2017-04-05 22:36:27 +00:00
setprop("/systems/acconfig/autoconfig-running", 0);
2017-05-29 16:30:05 +00:00
setprop("/systems/acconfig/spinning", 0);
setprop("/systems/acconfig/spin", "-");
2018-04-09 16:22:59 +00:00
setprop("/systems/acconfig/options/revision", 0);
setprop("/systems/acconfig/new-revision", 0);
2017-08-11 05:49:48 +00:00
setprop("/systems/acconfig/out-of-date", 0);
2017-09-21 01:09:20 +00:00
setprop("/systems/acconfig/mismatch-code", "0x000");
setprop("/systems/acconfig/mismatch-reason", "XX");
2018-04-09 16:22:59 +00:00
setprop("/systems/acconfig/options/keyboard-mode", 0);
2018-05-05 16:48:40 +00:00
setprop("/systems/acconfig/options/laptop-mode", 0);
2018-04-09 16:22:59 +00:00
setprop("/systems/acconfig/options/adirs-skip", 0);
setprop("/systems/acconfig/options/welcome-skip", 0);
2018-12-21 21:56:55 +00:00
setprop("/systems/acconfig/options/no-rendering-warn", 0);
2018-04-09 18:16:18 +00:00
setprop("/systems/acconfig/options/pfd-rate", 1);
setprop("/systems/acconfig/options/nd-rate", 1);
setprop("/systems/acconfig/options/uecam-rate", 1);
setprop("/systems/acconfig/options/lecam-rate", 1);
setprop("/systems/acconfig/options/iesi-rate", 1);
2017-09-17 17:11:35 +00:00
var main_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/main/dialog", "Aircraft/IDG-A32X/AircraftConfig/main.xml");
var welcome_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/welcome/dialog", "Aircraft/IDG-A32X/AircraftConfig/welcome.xml");
var ps_load_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/psload/dialog", "Aircraft/IDG-A32X/AircraftConfig/psload.xml");
var ps_loaded_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/psloaded/dialog", "Aircraft/IDG-A32X/AircraftConfig/psloaded.xml");
var init_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/init/dialog", "Aircraft/IDG-A32X/AircraftConfig/ac_init.xml");
var help_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/help/dialog", "Aircraft/IDG-A32X/AircraftConfig/help.xml");
var fbw_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/fbw/dialog", "Aircraft/IDG-A32X/AircraftConfig/fbw.xml");
var fail_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/fail/dialog", "Aircraft/IDG-A32X/AircraftConfig/fail.xml");
var about_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/about/dialog", "Aircraft/IDG-A32X/AircraftConfig/about.xml");
var update_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/update/dialog", "Aircraft/IDG-A32X/AircraftConfig/update.xml");
2018-04-09 16:22:59 +00:00
var updated_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/updated/dialog", "Aircraft/IDG-A32X/AircraftConfig/updated.xml");
2017-09-21 01:09:20 +00:00
var error_mismatch = gui.Dialog.new("sim/gui/dialogs/acconfig/error/mismatch/dialog", "Aircraft/IDG-A32X/AircraftConfig/error-mismatch.xml");
2017-11-30 22:10:36 +00:00
var groundservices_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/groundsrvc/dialog", "Aircraft/IDG-A32X/AircraftConfig/groundservices.xml");
2018-05-05 16:48:40 +00:00
var du_quality = gui.Dialog.new("sim/gui/dialogs/acconfig/du-quality/dialog", "Aircraft/IDG-A32X/AircraftConfig/du-quality.xml");
2018-12-21 21:56:55 +00:00
var rendering_dlg = gui.Dialog.new("sim/gui/dialogs/rendering/dialog", "Aircraft/IDG-A32X/AircraftConfig/rendering.xml");
2017-05-29 16:30:05 +00:00
spinning.start();
2017-04-05 22:36:27 +00:00
init_dlg.open();
2017-10-05 17:09:50 +00:00
http.load("https://raw.githubusercontent.com/it0uchpods/IDG-A32X/master/revision.txt").done(func(r) setprop("/systems/acconfig/new-revision", r.response));
2018-08-13 03:28:32 +00:00
var revisionFile = (getprop("/sim/aircraft-dir") ~ "/revision.txt");
2017-08-11 05:49:48 +00:00
var current_revision = io.readfile(revisionFile);
2018-08-13 03:28:32 +00:00
print("IDG A32X Revision: " ~ current_revision);
2018-04-09 16:22:59 +00:00
setprop("/systems/acconfig/revision", current_revision);
2017-08-11 05:49:48 +00:00
setlistener("/systems/acconfig/new-revision", func {
if (getprop("/systems/acconfig/new-revision") > current_revision) {
setprop("/systems/acconfig/out-of-date", 1);
} else {
setprop("/systems/acconfig/out-of-date", 0);
}
});
2017-09-21 01:09:20 +00:00
var mismatch_chk = func {
2018-05-23 21:23:02 +00:00
if (num(string.replace(getprop("/sim/version/flightgear"),".","")) < 201810) {
2017-09-21 01:09:20 +00:00
setprop("/systems/acconfig/mismatch-code", "0x121");
2018-05-23 21:23:02 +00:00
setprop("/systems/acconfig/mismatch-reason", "FGFS version is too old! Please update FlightGear to at least 2018.1.0.");
2017-09-21 01:09:20 +00:00
if (getprop("/systems/acconfig/out-of-date") != 1) {
error_mismatch.open();
}
2018-12-21 21:56:55 +00:00
libraries.systemsLoop.stop();
2017-09-21 01:09:20 +00:00
print("Mismatch: 0x121");
2018-05-05 16:48:40 +00:00
welcome_dlg.close();
2018-02-07 00:45:31 +00:00
} else if (getprop("/gear/gear[0]/wow") == 0 or getprop("/position/altitude-ft") >= 15000) {
2017-09-21 16:52:19 +00:00
setprop("/systems/acconfig/mismatch-code", "0x223");
2018-05-05 16:48:40 +00:00
setprop("/systems/acconfig/mismatch-reason", "Preposterous configuration detected for initialization. Check your position or scenery.");
2017-09-21 16:52:19 +00:00
if (getprop("/systems/acconfig/out-of-date") != 1) {
error_mismatch.open();
}
2018-12-21 21:56:55 +00:00
libraries.systemsLoop.stop();
2017-09-21 16:52:19 +00:00
print("Mismatch: 0x223");
2018-05-05 16:48:40 +00:00
welcome_dlg.close();
2018-02-07 00:45:31 +00:00
} else if (getprop("/systems/acconfig/libraries-loaded") != 1) {
setprop("/systems/acconfig/mismatch-code", "0x247");
setprop("/systems/acconfig/mismatch-reason", "System files are missing or damaged. Please download a new copy of the aircraft.");
if (getprop("/systems/acconfig/out-of-date") != 1) {
error_mismatch.open();
}
2018-12-21 21:56:55 +00:00
libraries.systemsLoop.stop();
2018-02-07 00:45:31 +00:00
print("Mismatch: 0x247");
2018-05-05 16:48:40 +00:00
welcome_dlg.close();
2017-09-21 01:09:20 +00:00
}
}
2017-04-05 22:36:27 +00:00
setlistener("/sim/signals/fdm-initialized", func {
init_dlg.close();
2017-08-11 05:49:48 +00:00
if (getprop("/systems/acconfig/out-of-date") == 1) {
update_dlg.open();
2017-09-21 01:09:20 +00:00
print("System: The IDG-A32X is out of date!");
}
mismatch_chk();
2018-04-09 16:22:59 +00:00
readSettings();
2018-08-22 01:02:00 +00:00
if (getprop("/systems/acconfig/out-of-date") != 1 and getprop("/systems/acconfig/options/revision") < current_revision and getprop("/systems/acconfig/mismatch-code") == "0x000") {
2018-04-09 16:22:59 +00:00
updated_dlg.open();
2018-12-21 21:56:55 +00:00
if (getprop("/systems/acconfig/options/no-rendering-warn") != 1) {
renderingSettings.check();
}
2018-04-09 16:22:59 +00:00
} else if (getprop("/systems/acconfig/out-of-date") != 1 and getprop("/systems/acconfig/mismatch-code") == "0x000" and getprop("/systems/acconfig/options/welcome-skip") != 1) {
2017-08-11 05:49:48 +00:00
welcome_dlg.open();
2018-12-21 21:56:55 +00:00
if (getprop("/systems/acconfig/options/no-rendering-warn") != 1) {
renderingSettings.check();
}
2017-08-11 05:49:48 +00:00
}
2018-04-09 16:22:59 +00:00
setprop("/systems/acconfig/options/revision", current_revision);
writeSettings();
2017-05-29 16:30:05 +00:00
spinning.stop();
2017-04-05 22:36:27 +00:00
});
2018-12-21 21:56:55 +00:00
var renderingSettings = {
check: func() {
var rembrandt = getprop("/sim/rendering/rembrandt/enabled");
var ALS = getprop("/sim/rendering/shaders/skydome");
var customSettings = getprop("/sim/rendering/shaders/custom-settings") == 1;
var landmass = getprop("/sim/rendering/shaders/landmass") >= 4;
2019-01-12 14:39:01 +00:00
var model = getprop("/sim/rendering/shaders/model") >= 2;
2018-12-21 21:56:55 +00:00
if (!rembrandt and (!ALS or !customSettings or !landmass or !model)) {
rendering_dlg.open();
}
},
fixAll: func() {
me.fixCore();
var landmass = getprop("/sim/rendering/shaders/landmass") >= 4;
2019-01-12 14:39:01 +00:00
var model = getprop("/sim/rendering/shaders/model") >= 2;
2018-12-21 21:56:55 +00:00
if (!landmass) {
setprop("/sim/rendering/shaders/landmass", 4);
}
if (!model) {
2019-01-12 14:39:01 +00:00
setprop("/sim/rendering/shaders/model", 2);
2018-12-21 21:56:55 +00:00
}
},
fixCore: func() {
setprop("/sim/rendering/shaders/skydome", 1); # ALS on
setprop("/sim/rendering/shaders/custom-settings", 1);
gui.popupTip("Rendering Settings updated!");
},
};
2018-04-09 16:22:59 +00:00
var readSettings = func {
io.read_properties(getprop("/sim/fg-home") ~ "/Export/IDG-A32X-config.xml", "/systems/acconfig/options");
setprop("/options/system/keyboard-mode", getprop("/systems/acconfig/options/keyboard-mode"));
2018-05-05 16:48:40 +00:00
setprop("/options/system/laptop-mode", getprop("/systems/acconfig/options/laptop-mode"));
2018-04-09 16:22:59 +00:00
setprop("/controls/adirs/skip", getprop("/systems/acconfig/options/adirs-skip"));
2017-05-23 23:38:16 +00:00
}
2018-04-09 16:22:59 +00:00
var writeSettings = func {
setprop("/systems/acconfig/options/keyboard-mode", getprop("/options/system/keyboard-mode"));
2018-05-05 16:48:40 +00:00
setprop("/systems/acconfig/options/laptop-mode", getprop("/options/system/laptop-mode"));
2018-04-09 16:22:59 +00:00
setprop("/systems/acconfig/options/adirs-skip", getprop("/controls/adirs/skip"));
io.write_properties(getprop("/sim/fg-home") ~ "/Export/IDG-A32X-config.xml", "/systems/acconfig/options");
}
2017-05-21 01:58:26 +00:00
2017-04-05 22:36:27 +00:00
################
# Panel States #
################
# Cold and Dark
var colddark = func {
2018-12-21 21:56:55 +00:00
if (getprop("/systems/acconfig/mismatch-code") == "0x000") {
spinning.start();
2019-01-05 04:37:07 +00:00
ps_loaded_dlg.close();
2018-12-21 21:56:55 +00:00
ps_load_dlg.open();
setprop("/systems/acconfig/autoconfig-running", 1);
setprop("/controls/gear/brake-left", 1);
setprop("/controls/gear/brake-right", 1);
# Initial shutdown, and reinitialization.
setprop("/controls/engines/engine-start-switch", 1);
setprop("/controls/engines/engine[0]/cutoff-switch", 1);
setprop("/controls/engines/engine[1]/cutoff-switch", 1);
setprop("/controls/flight/slats", 0.000);
setprop("/controls/flight/flaps", 0.000);
setprop("/controls/flight/flap-lever", 0);
setprop("/controls/flight/flap-pos", 0);
setprop("/controls/flight/flap-txt", " ");
libraries.flaptimer.stop();
setprop("/controls/flight/speedbrake-arm", 0);
setprop("/controls/flight/speedbrake", 0);
setprop("/controls/gear/gear-down", 1);
setprop("/controls/flight/elevator-trim", 0);
2019-02-19 19:06:47 +00:00
setprop("/controls/switches/beacon", 0);
setprop("/controls/switches/strobe", 0.0);
setprop("/controls/switches/wing-lights", 0);
setprop("/controls/lighting/nav-lights-switch", 0);
setprop("/controls/lighting/turnoff-light-switch", 0);
setprop("/controls/lighting/taxi-light-switch", 0.0);
setprop("/controls/switches/landing-lights-l", 0.0);
setprop("/controls/switches/landing-lights-r", 0.0);
2018-12-21 21:56:55 +00:00
libraries.systemsInit();
failReset();
if (getprop("/engines/engine[1]/n2-actual") < 2) {
colddark_b();
} else {
var colddark_eng_off = setlistener("/engines/engine[1]/n2-actual", func {
if (getprop("/engines/engine[1]/n2-actual") < 2) {
removelistener(colddark_eng_off);
colddark_b();
}
});
}
2017-04-05 22:36:27 +00:00
}
}
var colddark_b = func {
# Continues the Cold and Dark script, after engines fully shutdown.
setprop("/controls/APU/master", 0);
setprop("/controls/APU/start", 0);
2019-01-13 21:06:44 +00:00
settimer(func {
setprop("/controls/gear/brake-left", 0);
setprop("/controls/gear/brake-right", 0);
setprop("/systems/acconfig/autoconfig-running", 0);
ps_load_dlg.close();
ps_loaded_dlg.open();
spinning.stop();
}, 2);
2017-04-05 22:36:27 +00:00
}
# Ready to Start Eng
var beforestart = func {
2018-12-21 21:56:55 +00:00
if (getprop("/systems/acconfig/mismatch-code") == "0x000") {
spinning.start();
2019-01-05 04:37:07 +00:00
ps_loaded_dlg.close();
2018-12-21 21:56:55 +00:00
ps_load_dlg.open();
setprop("/systems/acconfig/autoconfig-running", 1);
setprop("/controls/gear/brake-left", 1);
setprop("/controls/gear/brake-right", 1);
# First, we set everything to cold and dark.
setprop("/controls/engines/engine-start-switch", 1);
setprop("/controls/engines/engine[0]/cutoff-switch", 1);
setprop("/controls/engines/engine[1]/cutoff-switch", 1);
setprop("/controls/flight/slats", 0.000);
setprop("/controls/flight/flaps", 0.000);
setprop("/controls/flight/flap-lever", 0);
setprop("/controls/flight/flap-pos", 0);
setprop("/controls/flight/flap-txt", " ");
libraries.flaptimer.stop();
setprop("/controls/flight/speedbrake-arm", 0);
setprop("/controls/flight/speedbrake", 0);
setprop("/controls/gear/gear-down", 1);
setprop("/controls/flight/elevator-trim", 0);
libraries.systemsInit();
failReset();
setprop("/controls/APU/master", 0);
setprop("/controls/APU/start", 0);
# Now the Startup!
setprop("/controls/electrical/switches/battery1", 1);
setprop("/controls/electrical/switches/battery2", 1);
setprop("/controls/APU/master", 1);
setprop("/controls/APU/start", 1);
var apu_rpm_chk = setlistener("/systems/apu/rpm", func {
if (getprop("/systems/apu/rpm") >= 98) {
removelistener(apu_rpm_chk);
beforestart_b();
}
});
}
2017-04-05 22:36:27 +00:00
}
var beforestart_b = func {
# Continue with engine start prep.
2017-09-23 01:56:44 +00:00
setprop("/controls/fuel/tank0pump1", 1);
setprop("/controls/fuel/tank0pump2", 1);
setprop("/controls/fuel/tank1pump1", 1);
setprop("/controls/fuel/tank1pump2", 1);
2017-06-09 16:53:49 +00:00
setprop("/controls/fuel/tank2pump1", 1);
setprop("/controls/fuel/tank2pump2", 1);
2017-04-06 02:24:04 +00:00
setprop("/controls/electrical/switches/gen-apu", 1);
setprop("/controls/electrical/switches/galley", 1);
setprop("/controls/electrical/switches/gen1", 1);
setprop("/controls/electrical/switches/gen2", 1);
2017-04-28 22:27:21 +00:00
setprop("/controls/pneumatic/switches/bleedapu", 1);
setprop("/controls/pneumatic/switches/bleed1", 1);
setprop("/controls/pneumatic/switches/bleed2", 1);
2017-05-03 15:16:20 +00:00
setprop("/controls/pneumatic/switches/pack1", 1);
setprop("/controls/pneumatic/switches/pack2", 1);
2017-12-20 19:58:33 +00:00
setprop("/controls/adirs/ir[0]/knob","1");
setprop("/controls/adirs/ir[1]/knob","1");
setprop("/controls/adirs/ir[2]/knob","1");
2017-11-21 19:08:03 +00:00
systems.ADIRS.skip(0);
systems.ADIRS.skip(1);
systems.ADIRS.skip(2);
2017-05-21 17:20:14 +00:00
setprop("/controls/adirs/mcducbtn", 1);
2019-02-18 20:53:32 +00:00
setprop("/controls/switches/beacon", 1);
2017-08-17 03:25:16 +00:00
setprop("/controls/lighting/nav-lights-switch", 1);
2018-09-27 18:22:02 +00:00
setprop("/controls/radio/rmp[0]/on", 1);
setprop("/controls/radio/rmp[1]/on", 1);
setprop("/controls/radio/rmp[2]/on", 1);
2019-01-13 21:06:44 +00:00
settimer(func {
setprop("/controls/gear/brake-left", 0);
setprop("/controls/gear/brake-right", 0);
setprop("/systems/acconfig/autoconfig-running", 0);
ps_load_dlg.close();
ps_loaded_dlg.open();
spinning.stop();
}, 2);
2017-04-05 22:36:27 +00:00
}
# Ready to Taxi
var taxi = func {
2018-12-21 21:56:55 +00:00
if (getprop("/systems/acconfig/mismatch-code") == "0x000") {
spinning.start();
2019-01-05 04:37:07 +00:00
ps_loaded_dlg.close();
2018-12-21 21:56:55 +00:00
ps_load_dlg.open();
setprop("/systems/acconfig/autoconfig-running", 1);
setprop("/controls/gear/brake-left", 1);
setprop("/controls/gear/brake-right", 1);
# First, we set everything to cold and dark.
setprop("/controls/engines/engine-start-switch", 1);
setprop("/controls/engines/engine[0]/cutoff-switch", 1);
setprop("/controls/engines/engine[1]/cutoff-switch", 1);
setprop("/controls/flight/slats", 0.000);
setprop("/controls/flight/flaps", 0.000);
setprop("/controls/flight/flap-lever", 0);
setprop("/controls/flight/flap-pos", 0);
setprop("/controls/flight/flap-txt", " ");
libraries.flaptimer.stop();
setprop("/controls/flight/speedbrake-arm", 0);
setprop("/controls/flight/speedbrake", 0);
setprop("/controls/gear/gear-down", 1);
setprop("/controls/flight/elevator-trim", 0);
libraries.systemsInit();
failReset();
setprop("/controls/APU/master", 0);
setprop("/controls/APU/start", 0);
# Now the Startup!
setprop("/controls/electrical/switches/battery1", 1);
setprop("/controls/electrical/switches/battery2", 1);
setprop("/controls/APU/master", 1);
setprop("/controls/APU/start", 1);
var apu_rpm_chk = setlistener("/systems/apu/rpm", func {
if (getprop("/systems/apu/rpm") >= 98) {
removelistener(apu_rpm_chk);
taxi_b();
}
});
}
2017-04-05 22:36:27 +00:00
}
var taxi_b = func {
2018-05-19 16:03:57 +00:00
# Continue with engine start prep, and start engines.
2017-09-23 01:56:44 +00:00
setprop("/controls/fuel/tank0pump1", 1);
setprop("/controls/fuel/tank0pump2", 1);
setprop("/controls/fuel/tank1pump1", 1);
setprop("/controls/fuel/tank1pump2", 1);
2017-06-09 16:53:49 +00:00
setprop("/controls/fuel/tank2pump1", 1);
setprop("/controls/fuel/tank2pump2", 1);
2017-04-06 02:24:04 +00:00
setprop("/controls/electrical/switches/gen-apu", 1);
setprop("/controls/electrical/switches/galley", 1);
setprop("/controls/electrical/switches/gen1", 1);
setprop("/controls/electrical/switches/gen2", 1);
2017-04-28 22:27:21 +00:00
setprop("/controls/pneumatic/switches/bleedapu", 1);
setprop("/controls/pneumatic/switches/bleed1", 1);
setprop("/controls/pneumatic/switches/bleed2", 1);
2017-05-03 15:16:20 +00:00
setprop("/controls/pneumatic/switches/pack1", 1);
setprop("/controls/pneumatic/switches/pack2", 1);
2017-12-20 19:58:33 +00:00
setprop("/controls/adirs/ir[0]/knob","1");
setprop("/controls/adirs/ir[1]/knob","1");
setprop("/controls/adirs/ir[2]/knob","1");
2017-11-21 19:08:03 +00:00
systems.ADIRS.skip(0);
systems.ADIRS.skip(1);
systems.ADIRS.skip(2);
2017-05-21 17:20:14 +00:00
setprop("/controls/adirs/mcducbtn", 1);
2019-02-19 19:06:47 +00:00
setprop("/controls/switches/beacon", 1);
setprop("/controls/switches/wing-lights", 1);
2017-08-17 03:25:16 +00:00
setprop("/controls/lighting/nav-lights-switch", 1);
2018-09-27 18:22:02 +00:00
setprop("/controls/radio/rmp[0]/on", 1);
setprop("/controls/radio/rmp[1]/on", 1);
setprop("/controls/radio/rmp[2]/on", 1);
2019-02-19 19:06:47 +00:00
setprop("/controls/lighting/turnoff-light-switch", 1);
2019-01-15 04:21:55 +00:00
setprop("/controls/lighting/taxi-light-switch", 0.5);
2019-02-18 20:53:32 +00:00
setprop("/controls/switches/landing-lights-l", 0.5);
setprop("/controls/switches/landing-lights-r", 0.5);
2017-06-09 16:53:49 +00:00
settimer(taxi_c, 2);
2017-04-28 22:27:21 +00:00
}
var taxi_c = func {
2017-04-05 22:36:27 +00:00
setprop("/controls/engines/engine-start-switch", 2);
2017-10-05 14:53:24 +00:00
setprop("/controls/engines/engine[0]/cutoff-switch", 0);
2017-04-05 22:36:27 +00:00
setprop("/controls/engines/engine[1]/cutoff-switch", 0);
2017-10-05 14:53:24 +00:00
settimer(func {
taxi_d();
}, 10);
2017-04-05 22:36:27 +00:00
}
2017-04-28 22:27:21 +00:00
var taxi_d = func {
2017-04-05 22:36:27 +00:00
# After Start items.
setprop("/controls/engines/engine-start-switch", 1);
setprop("/controls/APU/master", 0);
setprop("/controls/APU/start", 0);
2017-04-28 22:27:21 +00:00
setprop("/controls/pneumatic/switches/bleedapu", 0);
2017-10-05 14:53:24 +00:00
setprop("/controls/gear/brake-left", 0);
setprop("/controls/gear/brake-right", 0);
2017-04-05 22:36:27 +00:00
setprop("/systems/acconfig/autoconfig-running", 0);
ps_load_dlg.close();
ps_loaded_dlg.open();
2017-05-29 16:30:05 +00:00
spinning.stop();
2017-04-05 22:36:27 +00:00
}
# Ready to Takeoff
var takeoff = func {
2018-12-21 21:56:55 +00:00
if (getprop("/systems/acconfig/mismatch-code") == "0x000") {
# The same as taxi, except we set some things afterwards.
taxi();
var eng_one_chk_c = setlistener("/engines/engine[0]/state", func {
if (getprop("/engines/engine[0]/state") == 3) {
removelistener(eng_one_chk_c);
2019-02-19 19:06:47 +00:00
setprop("/controls/switches/strobe", 1.0);
2019-01-15 04:21:55 +00:00
setprop("/controls/lighting/taxi-light-switch", 1);
2019-02-18 20:53:32 +00:00
setprop("/controls/switches/landing-lights-l", 1);
setprop("/controls/switches/landing-lights-r", 1);
2018-12-21 21:56:55 +00:00
setprop("/controls/flight/speedbrake-arm", 1);
setprop("/controls/flight/flaps", 0.290);
setprop("/controls/flight/slats", 0.666);
setprop("/controls/flight/flap-lever", 1);
setprop("/controls/flight/flap-pos", 2);
setprop("/controls/flight/flap-txt", "1+F");
libraries.flaptimer.start();
setprop("/controls/flight/elevator-trim", -0.07);
systems.arm_autobrake(3);
libraries.ECAM.toConfig();
}
});
}
2017-04-05 22:36:27 +00:00
}
