This repository has been archived on 2021-09-26. You can view files and clone it, but cannot push or open issues or pull requests.
IDG-A32X/AircraftConfig/acconfig.nas

416 lines
16 KiB
Text
Raw Normal View History

# Aircraft Config Center
# Joshua Davidson (it0uchpods)
2017-11-16 19:29:08 +00:00
##############################################
# Copyright (c) Joshua Davidson (it0uchpods) #
##############################################
2017-06-07 18:58:49 +00:00
var spinning = maketimer(0.05, func {
var spinning = getprop("/systems/acconfig/spinning");
if (spinning == 0) {
setprop("/systems/acconfig/spin", "\\");
setprop("/systems/acconfig/spinning", 1);
} else if (spinning == 1) {
setprop("/systems/acconfig/spin", "|");
setprop("/systems/acconfig/spinning", 2);
} else if (spinning == 2) {
setprop("/systems/acconfig/spin", "/");
setprop("/systems/acconfig/spinning", 3);
} else if (spinning == 3) {
setprop("/systems/acconfig/spin", "-");
setprop("/systems/acconfig/spinning", 0);
}
});
var failReset = func {
setprop("/systems/failures/elac1", 0);
setprop("/systems/failures/elac2", 0);
setprop("/systems/failures/sec1", 0);
setprop("/systems/failures/sec2", 0);
setprop("/systems/failures/sec3", 0);
setprop("/systems/failures/fac1", 0);
setprop("/systems/failures/fac2", 0);
setprop("/systems/failures/aileron-left", 0);
setprop("/systems/failures/aileron-right", 0);
setprop("/systems/failures/elevator-left", 0);
setprop("/systems/failures/elevator-right", 0);
setprop("/systems/failures/rudder", 0);
setprop("/systems/failures/spoiler-l1", 0);
setprop("/systems/failures/spoiler-l2", 0);
setprop("/systems/failures/spoiler-l3", 0);
setprop("/systems/failures/spoiler-l4", 0);
setprop("/systems/failures/spoiler-l5", 0);
setprop("/systems/failures/spoiler-r1", 0);
setprop("/systems/failures/spoiler-r2", 0);
setprop("/systems/failures/spoiler-r3", 0);
setprop("/systems/failures/spoiler-r4", 0);
setprop("/systems/failures/spoiler-r5", 0);
setprop("/systems/failures/elec-ac-ess", 0);
setprop("/systems/failures/elec-batt1", 0);
setprop("/systems/failures/elec-batt2", 0);
setprop("/systems/failures/elec-galley", 0);
setprop("/systems/failures/elec-genapu", 0);
setprop("/systems/failures/elec-gen1", 0);
setprop("/systems/failures/elec-gen2", 0);
setprop("/systems/failures/bleed-apu", 0);
setprop("/systems/failures/bleed-ext", 0);
setprop("/systems/failures/bleed-eng1", 0);
setprop("/systems/failures/bleed-eng2", 0);
setprop("/systems/failures/pack1", 0);
setprop("/systems/failures/pack2", 0);
setprop("/systems/failures/hyd-blue", 0);
setprop("/systems/failures/hyd-green", 0);
setprop("/systems/failures/hyd-yellow", 0);
setprop("/systems/failures/ptu", 0);
setprop("/systems/failures/pump-blue", 0);
setprop("/systems/failures/pump-green", 0);
setprop("/systems/failures/pump-yellow-eng", 0);
setprop("/systems/failures/pump-yellow-elec", 0);
2017-09-23 01:56:44 +00:00
setprop("/systems/failures/tank0pump1", 0);
setprop("/systems/failures/tank0pump2", 0);
setprop("/systems/failures/tank1pump1", 0);
setprop("/systems/failures/tank1pump2", 0);
2017-07-25 16:21:41 +00:00
setprop("/systems/failures/tank2pump1", 0);
setprop("/systems/failures/tank2pump2", 0);
setprop("/systems/failures/fuelmode", 0);
setprop("/systems/failures/cargo-aft-fire", 0);
setprop("/systems/failures/cargo-fwd-fire", 0);
}
failReset();
setprop("/systems/acconfig/autoconfig-running", 0);
setprop("/systems/acconfig/spinning", 0);
setprop("/systems/acconfig/spin", "-");
setprop("/systems/acconfig/new-revision", "");
setprop("/systems/acconfig/out-of-date", 0);
setprop("/systems/acconfig/mismatch-code", "0x000");
setprop("/systems/acconfig/mismatch-reason", "XX");
2017-09-17 17:11:35 +00:00
var main_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/main/dialog", "Aircraft/IDG-A32X/AircraftConfig/main.xml");
var welcome_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/welcome/dialog", "Aircraft/IDG-A32X/AircraftConfig/welcome.xml");
var ps_load_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/psload/dialog", "Aircraft/IDG-A32X/AircraftConfig/psload.xml");
var ps_loaded_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/psloaded/dialog", "Aircraft/IDG-A32X/AircraftConfig/psloaded.xml");
var init_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/init/dialog", "Aircraft/IDG-A32X/AircraftConfig/ac_init.xml");
var help_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/help/dialog", "Aircraft/IDG-A32X/AircraftConfig/help.xml");
var fbw_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/fbw/dialog", "Aircraft/IDG-A32X/AircraftConfig/fbw.xml");
var fail_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/fail/dialog", "Aircraft/IDG-A32X/AircraftConfig/fail.xml");
var about_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/about/dialog", "Aircraft/IDG-A32X/AircraftConfig/about.xml");
var update_dlg = gui.Dialog.new("sim/gui/dialogs/acconfig/update/dialog", "Aircraft/IDG-A32X/AircraftConfig/update.xml");
var error_mismatch = gui.Dialog.new("sim/gui/dialogs/acconfig/error/mismatch/dialog", "Aircraft/IDG-A32X/AircraftConfig/error-mismatch.xml");
spinning.start();
init_dlg.open();
2017-10-05 17:09:50 +00:00
http.load("https://raw.githubusercontent.com/it0uchpods/IDG-A32X/master/revision.txt").done(func(r) setprop("/systems/acconfig/new-revision", r.response));
var revisionFile = (getprop("/sim/aircraft-dir")~"/revision.txt");
var current_revision = io.readfile(revisionFile);
setlistener("/systems/acconfig/new-revision", func {
if (getprop("/systems/acconfig/new-revision") > current_revision) {
setprop("/systems/acconfig/out-of-date", 1);
} else {
setprop("/systems/acconfig/out-of-date", 0);
}
});
var mismatch_chk = func {
2017-09-28 23:07:10 +00:00
if (num(string.replace(getprop("/sim/version/flightgear"),".","")) < 201730) {
setprop("/systems/acconfig/mismatch-code", "0x121");
2017-09-28 23:07:10 +00:00
setprop("/systems/acconfig/mismatch-reason", "FGFS version older than 2017.3.0, please update FlightGear");
if (getprop("/systems/acconfig/out-of-date") != 1) {
error_mismatch.open();
}
print("Mismatch: 0x121");
2017-09-21 16:52:19 +00:00
} else if (getprop("/gear/gear[0]/wow") == 0 or getprop("/position/altitude-ft") >= 50000 or getprop("/systems/acconfig/libraries-loaded") == 0) {
setprop("/systems/acconfig/mismatch-code", "0x223");
setprop("/systems/acconfig/mismatch-reason", "Aircraft initialization failed");
if (getprop("/systems/acconfig/out-of-date") != 1) {
error_mismatch.open();
}
print("Mismatch: 0x223");
}
}
setlistener("/sim/signals/fdm-initialized", func {
init_dlg.close();
if (getprop("/systems/acconfig/out-of-date") == 1) {
update_dlg.open();
print("System: The IDG-A32X is out of date!");
}
mismatch_chk();
if (getprop("/systems/acconfig/out-of-date") != 1 and getprop("/systems/acconfig/mismatch-code") == "0x000") {
welcome_dlg.open();
}
spinning.stop();
});
2017-05-23 23:38:16 +00:00
var saveSettings = func {
2017-10-05 17:09:50 +00:00
aircraft.data.add("/options/system/keyboard-mode", "/controls/adirs/skip", "/controls/tray/surprise");
2017-05-23 23:38:16 +00:00
aircraft.data.save();
}
saveSettings();
var systemsReset = func {
fbw.fctlInit();
systems.elec_init();
systems.ADIRSreset();
systems.pneu_init();
systems.hyd_init();
systems.fuel_init();
2017-07-03 18:26:43 +00:00
systems.eng_init();
2017-10-04 19:53:07 +00:00
systems.autobrake_init();
fmgc.FMGCinit();
mcdu1.MCDU_reset();
mcdu2.MCDU_reset();
icing.icingInit();
fmgc.APinit();
2017-06-02 00:53:50 +00:00
setprop("/it-autoflight/input/fd1", 1);
setprop("/it-autoflight/input/fd2", 1);
libraries.ECAMinit();
libraries.variousReset();
}
################
# Panel States #
################
# Cold and Dark
var colddark = func {
spinning.start();
ps_load_dlg.open();
setprop("/systems/acconfig/autoconfig-running", 1);
setprop("/controls/gear/brake-left", 1);
setprop("/controls/gear/brake-right", 1);
# Initial shutdown, and reinitialization.
setprop("/controls/engines/engine-start-switch", 1);
setprop("/controls/engines/engine[0]/cutoff-switch", 1);
setprop("/controls/engines/engine[1]/cutoff-switch", 1);
setprop("/controls/flight/slats", 0.000);
setprop("/controls/flight/flaps", 0.000);
setprop("/controls/flight/flap-lever", 0);
setprop("/controls/flight/flap-pos", 0);
setprop("/controls/flight/flap-txt", " ");
libraries.flaptimer.stop();
setprop("/controls/flight/speedbrake-arm", 0);
setprop("/controls/gear/gear-down", 1);
setprop("/controls/flight/elevator-trim", 0);
systemsReset();
2017-06-01 00:12:07 +00:00
failReset();
2017-10-15 18:11:27 +00:00
if (getprop("/engines/engine[1]/n2-actual") < 2) {
colddark_b();
} else {
2017-10-15 18:11:27 +00:00
var colddark_eng_off = setlistener("/engines/engine[1]/n2-actual", func {
if (getprop("/engines/engine[1]/n2-actual") < 2) {
removelistener(colddark_eng_off);
colddark_b();
}
});
}
}
var colddark_b = func {
# Continues the Cold and Dark script, after engines fully shutdown.
setprop("/controls/APU/master", 0);
setprop("/controls/APU/start", 0);
2017-04-24 12:46:44 +00:00
setprop("/controls/bleed/OHP/bleedapu", 0);
setprop("/controls/electrical/switches/battery1", 0);
setprop("/controls/electrical/switches/battery2", 0);
setprop("/controls/gear/brake-left", 0);
setprop("/controls/gear/brake-right", 0);
setprop("/systems/acconfig/autoconfig-running", 0);
ps_load_dlg.close();
ps_loaded_dlg.open();
spinning.stop();
}
# Ready to Start Eng
var beforestart = func {
spinning.start();
ps_load_dlg.open();
setprop("/systems/acconfig/autoconfig-running", 1);
setprop("/controls/gear/brake-left", 1);
setprop("/controls/gear/brake-right", 1);
# First, we set everything to cold and dark.
setprop("/controls/engines/engine-start-switch", 1);
setprop("/controls/engines/engine[0]/cutoff-switch", 1);
setprop("/controls/engines/engine[1]/cutoff-switch", 1);
setprop("/controls/flight/slats", 0.000);
setprop("/controls/flight/flaps", 0.000);
setprop("/controls/flight/flap-lever", 0);
setprop("/controls/flight/flap-pos", 0);
setprop("/controls/flight/flap-txt", " ");
libraries.flaptimer.stop();
setprop("/controls/flight/speedbrake-arm", 0);
setprop("/controls/gear/gear-down", 1);
setprop("/controls/flight/elevator-trim", 0);
systemsReset();
2017-06-01 00:12:07 +00:00
failReset();
setprop("/controls/APU/master", 0);
setprop("/controls/APU/start", 0);
2017-04-24 12:46:44 +00:00
setprop("/controls/bleed/OHP/bleedapu", 0);
setprop("/controls/electrical/switches/battery1", 0);
setprop("/controls/electrical/switches/battery2", 0);
# Now the Startup!
setprop("/controls/electrical/switches/battery1", 1);
setprop("/controls/electrical/switches/battery2", 1);
setprop("/controls/APU/master", 1);
setprop("/controls/APU/start", 1);
var apu_rpm_chk = setlistener("/systems/apu/rpm", func {
if (getprop("/systems/apu/rpm") >= 98) {
removelistener(apu_rpm_chk);
beforestart_b();
}
});
}
var beforestart_b = func {
# Continue with engine start prep.
2017-09-23 01:56:44 +00:00
setprop("/controls/fuel/tank0pump1", 1);
setprop("/controls/fuel/tank0pump2", 1);
setprop("/controls/fuel/tank1pump1", 1);
setprop("/controls/fuel/tank1pump2", 1);
setprop("/controls/fuel/tank2pump1", 1);
setprop("/controls/fuel/tank2pump2", 1);
setprop("/controls/electrical/switches/gen-apu", 1);
setprop("/controls/electrical/switches/galley", 1);
setprop("/controls/electrical/switches/gen1", 1);
setprop("/controls/electrical/switches/gen2", 1);
setprop("/controls/pneumatic/switches/bleedapu", 1);
setprop("/controls/pneumatic/switches/bleed1", 1);
setprop("/controls/pneumatic/switches/bleed2", 1);
setprop("/controls/pneumatic/switches/pack1", 1);
setprop("/controls/pneumatic/switches/pack2", 1);
setprop("controls/adirs/ir[0]/knob","2");
setprop("controls/adirs/ir[1]/knob","2");
setprop("controls/adirs/ir[2]/knob","2");
setprop("instrumentation/adirs/ir[0]/display/ttn",0);
setprop("instrumentation/adirs/ir[1]/display/ttn",0);
setprop("instrumentation/adirs/ir[2]/display/ttn",0);
setprop("instrumentation/adirs/ir[0]/aligned",1);
setprop("instrumentation/adirs/ir[1]/aligned",1);
setprop("instrumentation/adirs/ir[2]/aligned",1);
setprop("/controls/adirs/mcducbtn", 1);
2017-08-17 03:25:16 +00:00
setprop("/controls/lighting/beacon", 1);
setprop("/controls/lighting/nav-lights-switch", 1);
setprop("/controls/gear/brake-left", 0);
setprop("/controls/gear/brake-right", 0);
setprop("/systems/acconfig/autoconfig-running", 0);
ps_load_dlg.close();
ps_loaded_dlg.open();
spinning.stop();
}
# Ready to Taxi
var taxi = func {
spinning.start();
ps_load_dlg.open();
setprop("/systems/acconfig/autoconfig-running", 1);
setprop("/controls/gear/brake-left", 1);
setprop("/controls/gear/brake-right", 1);
# First, we set everything to cold and dark.
setprop("/controls/engines/engine-start-switch", 1);
setprop("/controls/engines/engine[0]/cutoff-switch", 1);
setprop("/controls/engines/engine[1]/cutoff-switch", 1);
setprop("/controls/flight/slats", 0.000);
setprop("/controls/flight/flaps", 0.000);
setprop("/controls/flight/flap-lever", 0);
setprop("/controls/flight/flap-pos", 0);
setprop("/controls/flight/flap-txt", " ");
libraries.flaptimer.stop();
setprop("/controls/flight/speedbrake-arm", 0);
setprop("/controls/gear/gear-down", 1);
setprop("/controls/flight/elevator-trim", 0);
systemsReset();
2017-06-01 00:12:07 +00:00
failReset();
setprop("/controls/APU/master", 0);
setprop("/controls/APU/start", 0);
setprop("/controls/electrical/switches/battery1", 0);
setprop("/controls/electrical/switches/battery2", 0);
# Now the Startup!
setprop("/controls/electrical/switches/battery1", 1);
setprop("/controls/electrical/switches/battery2", 1);
setprop("/controls/APU/master", 1);
setprop("/controls/APU/start", 1);
var apu_rpm_chk = setlistener("/systems/apu/rpm", func {
if (getprop("/systems/apu/rpm") >= 99) {
removelistener(apu_rpm_chk);
taxi_b();
}
});
}
var taxi_b = func {
# Continue with engine start prep, and start engine 2.
2017-09-23 01:56:44 +00:00
setprop("/controls/fuel/tank0pump1", 1);
setprop("/controls/fuel/tank0pump2", 1);
setprop("/controls/fuel/tank1pump1", 1);
setprop("/controls/fuel/tank1pump2", 1);
setprop("/controls/fuel/tank2pump1", 1);
setprop("/controls/fuel/tank2pump2", 1);
setprop("/controls/electrical/switches/gen-apu", 1);
setprop("/controls/electrical/switches/galley", 1);
setprop("/controls/electrical/switches/gen1", 1);
setprop("/controls/electrical/switches/gen2", 1);
setprop("/controls/pneumatic/switches/bleedapu", 1);
setprop("/controls/pneumatic/switches/bleed1", 1);
setprop("/controls/pneumatic/switches/bleed2", 1);
setprop("/controls/pneumatic/switches/pack1", 1);
setprop("/controls/pneumatic/switches/pack2", 1);
setprop("controls/adirs/ir[0]/knob","2");
setprop("controls/adirs/ir[1]/knob","2");
setprop("controls/adirs/ir[2]/knob","2");
setprop("instrumentation/adirs/ir[0]/display/ttn",0);
setprop("instrumentation/adirs/ir[1]/display/ttn",0);
setprop("instrumentation/adirs/ir[2]/display/ttn",0);
setprop("instrumentation/adirs/ir[0]/aligned",1);
setprop("instrumentation/adirs/ir[1]/aligned",1);
setprop("instrumentation/adirs/ir[2]/aligned",1);
setprop("/controls/adirs/mcducbtn", 1);
2017-08-17 03:25:16 +00:00
setprop("/controls/lighting/beacon", 1);
setprop("/controls/lighting/nav-lights-switch", 1);
settimer(taxi_c, 2);
}
var taxi_c = func {
setprop("/controls/engines/engine-start-switch", 2);
setprop("/controls/engines/engine[0]/cutoff-switch", 0);
setprop("/controls/engines/engine[1]/cutoff-switch", 0);
settimer(func {
taxi_d();
}, 10);
}
var taxi_d = func {
# After Start items.
setprop("/controls/engines/engine-start-switch", 1);
setprop("/controls/APU/master", 0);
setprop("/controls/APU/start", 0);
setprop("/controls/pneumatic/switches/bleedapu", 0);
2017-08-17 03:25:16 +00:00
setprop("/controls/lighting/taxi-light-switch", 1);
setprop("/controls/gear/brake-left", 0);
setprop("/controls/gear/brake-right", 0);
setprop("/systems/acconfig/autoconfig-running", 0);
ps_load_dlg.close();
ps_loaded_dlg.open();
spinning.stop();
}
# Ready to Takeoff
var takeoff = func {
# The same as taxi, except we set some things afterwards.
taxi();
var eng_one_chk_c = setlistener("/engines/engine[0]/state", func {
if (getprop("/engines/engine[0]/state") == 3) {
removelistener(eng_one_chk_c);
2017-08-17 03:25:16 +00:00
setprop("/controls/lighting/strobe", 1);
setprop("/controls/lighting/landing-lights[1]", 1);
setprop("/controls/lighting/landing-lights[2]", 1);
setprop("/controls/flight/speedbrake-arm", 1);
setprop("/controls/flight/flaps", 0.290);
setprop("/controls/flight/slats", 0.666);
setprop("/controls/flight/flap-lever", 1);
setprop("/controls/flight/flap-pos", 2);
setprop("/controls/flight/flap-txt", "1+F");
libraries.flaptimer.start();
2017-06-09 22:27:30 +00:00
setprop("/controls/flight/elevator-trim", -0.07);
2017-11-17 15:55:27 +00:00
setprop("/controls/autobrake/mode", 3);
}
});
}