Fix Linear feature when angles is close to 180 or 0 degrees.

- it doesn't hang anymore, but it generates artifacts.  more study needed

src/Airports/GenAirports850/closedpoly.cxx

@@ -587,8 +587,16 @@ int ClosedPoly::BuildBtg( float alt_m, superpoly_list* rwy_polys, texparams_list
             material = "pc_tiedown";
             break;
 
+        case 3:
+            material = "grass_rwy";
+            break;
+
+        case 4:
+            material = "grass_rwy";
+            break;
+
         default:
-            SG_LOG(SG_GENERAL, SG_DEBUG, "ClosedPoly::BuildBtg: unknown material " << surface_type );
+            SG_LOG(SG_GENERAL, SG_ALERT, "ClosedPoly::BuildBtg: unknown material " << surface_type );
             exit(1);
     }
 
@@ -627,7 +635,7 @@ int ClosedPoly::BuildBtg( float alt_m, superpoly_list* rwy_polys, texparams_list
         rwy_polys->push_back( sp );
         SG_LOG(SG_GENERAL, SG_DEBUG, "clipped = " << clipped.contours());
         *accum = tgPolygonUnion( pre_tess, *accum );
-        tp = TGTexParams( pre_tess.get_pt(0,0), 1.0 /* TODO poly width */, 1.0 /* TODO poly length */, texture_heading );
+        tp = TGTexParams( pre_tess.get_pt(0,0), 5.0, 5.0, texture_heading );
         texparams->push_back( tp );
 
         ExpandContour( hull, base, 20.0 );

src/Airports/GenAirports850/linearfeature.cxx

@@ -222,19 +222,20 @@ void LinearFeature::ConvertContour( BezContour* src  )
     }
 }
 
-
 Point3D LinearFeature::OffsetPointMiddle( Point3D *prev, Point3D *cur, Point3D *next, double offset_by )
 {
     double offset_dir;
     double next_dir;
     double az1, az2;
     double dist;
+    double theta;
     double pt_x, pt_y;
 
     SG_LOG(SG_GENERAL, SG_DEBUG, "Find average angle for contour: prev (" << *prev << "), "
                                                                   "cur (" << *cur  << "), "
                                                                  "next (" << *next << ")" );
 
+ 
    // first, find if the line turns left or right ar src
     // for this, take the cross product of the vectors from prev to src, and src to next.
     // if the cross product is negetive, we've turned to the left
@@ -252,7 +253,46 @@ Point3D LinearFeature::OffsetPointMiddle( Point3D *prev, Point3D *cur, Point3D *
 
     // check the turn direction
     SGVec3d cp = cross( dir1, dir2 );
-    SG_LOG(SG_GENERAL, SG_DEBUG, "\tcross product of dir1: " << dir1 << " and dir2: " << dir2 << " is " << cp );
+    SG_LOG(SG_GENERAL, SG_ALERT, "\tcross product of dir1: " << dir1 << " and dir2: " << dir2 << " is " << cp );
+
+    // calculate the angle between cur->prev and cur->next
+    theta = SGMiscd::rad2deg(CalculateTheta(*prev, *cur, *next));
+
+    if ( abs(theta - 180.0) < 0.1 )
+    {
+        SG_LOG(SG_GENERAL, SG_ALERT, "\nLinearFeature: (theta close to 180) " << description << ": theta is " << theta );
+
+        // find the direction to the next point
+        geo_inverse_wgs_84( cur->y(), cur->x(), next->y(), next->x(), &next_dir, &az2, &dist);
+
+        offset_dir = next_dir - 90.0;
+        while (offset_dir < 0.0)
+        {
+            offset_dir += 360.0;
+        }
+
+        // straight line blows up math - dist should be exactly as given
+        dist = offset_by;        
+    }
+    else if ( abs(theta) < 0.1 )
+    {
+        SG_LOG(SG_GENERAL, SG_ALERT, "\nLinearFeature: (theta close to 0) " << description << ": theta is " << theta );
+
+        // find the direction to the next point
+        geo_inverse_wgs_84( cur->y(), cur->x(), next->y(), next->x(), &next_dir, &az2, &dist);
+
+        offset_dir = next_dir - 90;
+        while (offset_dir < 0.0)
+        {
+            offset_dir += 360.0;
+        }
+
+        // straight line blows up math - dist should be exactly as given
+        dist = offset_by;        
+    }
+    else
+    {
+        SG_LOG(SG_GENERAL, SG_ALERT, "\nLinearFeature: (theta NOT close to 180) " << description << ": theta is " << theta );
 
         // find the offset angle
         geo_inverse_wgs_84( avg.y(), avg.x(), 0.0f, 0.0f, &offset_dir, &az2, &dist);
@@ -272,13 +312,14 @@ Point3D LinearFeature::OffsetPointMiddle( Point3D *prev, Point3D *cur, Point3D *
 
         // calculate correct distance for the offset point
         dist = (offset_by)/sin(SGMiscd::deg2rad(next_dir-offset_dir));
+    }
 
-    SG_LOG(SG_GENERAL, SG_DEBUG, "\theading is " << offset_dir << " distance is " << dist );
+    SG_LOG(SG_GENERAL, SG_ALERT, "\theading is " << offset_dir << " distance is " << dist );
 
     // calculate the point from cur
     geo_direct_wgs_84( cur->y(), cur->x(), offset_dir, dist, &pt_y, &pt_x, &az2 );
 
-    SG_LOG(SG_GENERAL, SG_DEBUG, "\tpoint is (" << pt_x << "," << pt_y << ")" );
+    SG_LOG(SG_GENERAL, SG_ALERT, "\tpoint is (" << pt_x << "," << pt_y << ")" );
 
     return Point3D(pt_x, pt_y, 0.0f);
 }