External moments can now be specified in addition to external forces. This feature is needed for the AI wakes.
Headers clean up to reduce the amount of recompilation when modifying an header file.
Print an error message and exit if --{enable,disable}-enhanced-lighting
or --adf are used (those deprecated options will be removed in a future
version of FlightGear).
Add man pages for those programs that did not have one (exceptions:
yasim and yasim-proptest) and update the existing ones to make them
compliant with man-pages(7) conventions.
As spotted by Thorsten, reduce user annoyance by asking about FGData
when the built-in data is acceptable. (Advanced users can use the
launcher or other options to change FGdata as normal).
* Skip the gears when located over water. They will be skipped by the ground reactions anyway making the trim irrelevant.
* Ignore the ground bumpiness during the trim. The trim algorithm seems not to
be robust enough to handle that. This does not make much difference to the
converged solution anyway since the bumpiness is generally low.
* Fixed the WOW status for contacts over water (was 'false' is now 'true').
* All the gear/contact data are now properly reset when WOW==false. The reset
code is now common to all the case where WOW is false.
When the user specified an MP server without providing a port, the
launcher would pass a malformed command line, leading the the simulator
bailing out.
(Should go to the release branch)
Add defensive logic to ensure that a null pointer isn't dereferenced. This happened to me once or twice during a reinit (Location/Position In Air to the current position). It may be related to the model, but in any case the code needs to ensure that the static cast failure is handled correctly.
2017.2 in compatible mode was not compatible with 2017.1.x because the V1 packet had V2 properties in it; the protocol version and the new launchbar encoding - both of which should not be transmitted. This only affected 2017.1 because it discards the rest of the packet once an unknown property is encountered (to increase reliability).
Remove obsolete *NIX packaging files (they have not been updated in a long
time, and packaging is handled by each Linux distribution), plus an old,
generic FlightGear icon used exclusively by the Debian package and not
matching the official logo.
Thanks to Chris Blues, Thorsten Renk, Alessandro Menti,
Andrius Štikonas, Erik Hofman, Chimpa Theist, Emilian Huminiuc
and 梁思地 (Sidi Liang) for their translation work (sorted by
locale name!).
Add support for per property encoding.
- encode_for_transmit - method that will convert from and to the packet for the value.
- decode_received - decodes received data
Just for consistency and cleanliness, following commit
4b48aca411. The 'package/debian' directory
is going to be removed soon, anyway[1].
The 'RedHat' and 'openSUSE' directories in 'package' don't need such a
change, because they use their own desktop file (and they should also be
removed after the 2017.2.1 release).
[1] https://sourceforge.net/p/flightgear/flightgear/merge-requests/92/
The options.cxx code is not ready to handle recursive use of --config
(for config files). Instead of failing in an ugly way, abort with a
clear error message in such situations. See discussion at
<https://sourceforge.net/p/flightgear/mailman/message/35838852/>.
Note: it *is* possible to load XML PropertyList files from config files,
so --config is not entirely "banned" from config files.
+ add missing include
New Nasal method get_cart_ground_intersection
Returns where the given position in the specified direction will intersect with the ground. Returns whether or not a certain position and direction pair intersect with the ground, and if so the intersection point.
Useful for radars, terrain avoidance (GPWS), etc.
Input parameters:
1. vec3d(x,y,z) position
2. vec3d(x,y,z) direction
Returns nil or geod hash (lat:rad,lon:rad,elevation:Meters) intersection
Example Usage:
var end = geo.Coord.new(start);
end.apply_course_distance(heading, speed_horz_fps*FT2M);
end.set_alt(end.alt() - speed_down_fps*FT2M);
var dir_x = end.x() - start.x();
var dir_y = end.y() - start.y();
var dir_z = end.z() - start.z();
var xyz = { "x":start.x(), "y" : start.y(), "z" : start.z() };
var dir = { "x":dir_x, "y" : dir_y, "z" : dir_z };
var geod = get_cart_ground_intersection(xyz, dir);
if (geod != nil) {
end.set_latlon(geod.lat, geod.lon, geod.elevation);
var dist = start.direct_distance_to(end)*M2FT;
var time = dist / speed_fps;
setprop("/sim/model/radar/time-until-impact", time);
}
-----------
Nasal method aircraftToCart : This allows easily computing offsets in aircraft-relative coordinates, and converting to global cartesian (ECEF) reference frame.
This has the advantage, according to my testing on Linux, that core
files obtained after a crash now point to the crashing thread again,
when one starts 'gdb' on the core file and runs the 'bt' command.
Apparently, when using kill(), the signal is seen as coming from the
outside and gdb's 'bt' command points to the wrong thread in general
when debugging using a core file (when debugging "live", gdb intercepts
the signal even before FG's signal handler is started).
See discussion starting at
<https://sourceforge.net/p/flightgear/mailman/message/35833221/>.
Add an additional visibility flag to the menubar implementations,
conditional on whether or not the menubar overlaps the window content.
(I.e for PUI but not Cocoa). This flag is linked to a new property
/sim/menubar/overlap-hide, which the renderer drives off the splash-
screen visibility.
On Windows, use:
- QtFileDialog if FG was built with Qt support;
- PUIFileDialog otherwise.
Behavior on other platforms is unchanged. This change is motivated by
the fact that some Windows users have reported[1][2] weird,
non-deterministic behavior of WindowsFileDialog and unfortunately, no
one seems to be willing and able to fix the problem. The Qt
implementation comes for free and should be quite robust. Of course, if
someone wants to maintain the WindowsFileDialog class again, the change
can be reverted.
See discussion at [3].
[1] https://forum.flightgear.org/viewtopic.php?f=25&t=31945
[2] https://sourceforge.net/p/flightgear/mailman/message/35761650/
[3] https://sourceforge.net/p/flightgear/mailman/message/35759819/
This fixes handling of non-ASCII splashscreen text for me (Debian
GNU/Linux). The XML input files don't technically *have* to be encoded
in UTF-8, as long as they properly declare the encoding and it is
supported by Expat. Of course, we prefer UTF-8 nowadays.
With this commit, startup tips and splash screen progress strings
("Loading scenery", "Initializing subsystems", etc.) can at last be
written correctly in languages that need non-ASCII characters.
The Expat doc is unfortunately unclear on its *output* encoding, saying
the following (expat.h):
The characters are passed exactly as they were in the XML document
except that they will be encoded in UTF-8 or UTF-16.
The only relevant header I can see in SimGear is
3rdparty/expat/sg_expat_external.h, which has interesting stuff around
XML_UNICODE, however it doesn't seem to take position.
I fear that whether UTF-8 or UTF-16 is used for Expat's output (and thus
for what easyxml.cxx gives us) depends on how it was compiled. Let's
hope everyone has it compiled for UTF-8 output...
In commit 15525aab58, a layer with
lapse=0.0 was added to ISA_def (atmosphere model). However, the last
layer *must* have lapse == -1.0, otherwise the code in PT_vs_hpt()
doesn't know when it's on the last element of ISA_def, and does an
illegal memory access with (pp+1)->height. This is why -1.0 is the
default value for lapse ('l') in the ISA_layer constructor.
Fix: add the -1.0 terminator to the last element of ISA_def.
When the test:
if (i == activeTraffic.end() || (activeTraffic.empty()))
was true, the iterator named 'current' was uninitialized and later
dereferenced.
Fix:
- when the previously-mentioned test is true, return;
- initialize 'current' only when it is really needed (i.e., later and
after the test), and since we don't need it for iterating, make it
an FGTrafficRecord&.
