If an add-on has a file named addon-menubar-items.xml in its base
directory, load it and add its items to the FG menubar.
Logically, fgStartNewReset() should call
flightgear::addons::AddonManager::instance()->addAddonMenusToFGMenubar()
in order to re-add the items, however doing so would cause the
add-on-specific menus to be added one more time on every reset, because
for some reason, commit 45ea8b5daa added
the PRESERVE attribute to /sim/menubar (apparently to preserve the state
of menu entries upon reset?).
Note: the addon-menubar-items.xml files are reloaded during reset,
however the menu bar doesn't reflect this, since adding the
reloaded items to the menu bar in fgStartNewReset() would cause
the add-on-specific menus to appear several times in the menu bar,
as explained above.
If running with the launcher, and FG-home is read-only, show a warning
to the user, since this is probably a surprise to them.
(In non-launcher mode we don’t show the box, since it’s more likely to
be an intentional duplicate launch)
This commit adds C++ classes for add-on management, most notably
AddonManager, Addon and AddonVersion. The AddonManager is used to
register add-ons. It relies on an std::map<std::string, AddonRef> to
hold the metadata of each registered add-on (keys of the std::map are
add-on identifiers, and AddonRef is currently SGSharedPtr<Addon>).
Accessor methods are available for:
- retrieving the list of registered or loaded add-ons (terminology
explained in $FG_ROOT/Docs/README.add-ons);
- checking if a particular add-on has already been registered or
loaded;
- for each add-on, obtaining an Addon instance which can be queried
for its name, id, version, base path, the minimum and maximum
FlightGear versions it requires, its base node in the Property Tree,
its order in the load sequence, short and long description strings,
home page, etc.
The most important metadata is made accessible in the Property Tree
under /addons/by-id/<addon-id> and the property
/addons/by-id/<addon-id>/loaded can be checked or listened to, in
order to determine when a particular add-on is loaded. There is also a
Nasal interface to access add-on metadata in a convenient way.
In order to provide this metadata, each add-on must from now on have in
its base directory a file called 'addon-metadata.xml'.
All this is documented in much more detail in
$FG_ROOT/Docs/README.add-ons.
Mailing-list discussion:
https://sourceforge.net/p/flightgear/mailman/message/36146017/
Call fgInitAllowedPaths() right after Options::processOptions() (which,
among other things, determines $FG_ROOT and processes
--allow-nasal-read). This way, fgInitAllowedPaths() can be used in much
more code, such as when initializing subsystems.
${CMAKE_SOURCE_DIR}/src/EmbeddedResources/FlightGear-resources.xml
(currently empty) is automatically "compiled" into
${CMAKE_BINARY_DIR}/src/EmbeddedResources/FlightGear-resources.[ch]xx by
fgrcc inside the build directory. These files are incorporated into the
FlightGear build (FlightGear-resources.cxx is linked into FlightGear).
When the XML embedded resource declaration file added here,
FlightGear-resources.xml, is compiled, fgrcc is passed the
--root=${CMAKE_SOURCE_DIR} option, so that files referred to in
FlightGear-resources.xml are looked up relatively to the root directory
of the FlightGear repository. One could use a second XML embedded
resource declaration file compiled with a different --root option to
grab files from FGData, for instance. I would name such a file
FGData-resources.xml to be consistent with the current naming scheme.
Note: this --root option applies to the paths of real files. Don't
confuse it with the 'prefix' attribute of <qresource> elements
inside XML resource declaration files (such as
FlightGear-resources.xml), which applies to the virtual path of
each resource defined beneath.
The commands in src/Main/CMakeLists.txt ensure that
FlightGear-resources.xml is recompiled with fgrcc whenever it is
changed, and obviously also when FlightGear-resources.cxx or
FlightGear-resources.hxx is missing. However, CMake doesn't know how to
parse fgrcc XML resource declaration files, therefore when a resource is
modified but the XML file it is declared in is not (here,
FlightGear-resources.xml), you have to trigger yourself a recompilation
of the XML resource declaration file to see the new resource contents
inside FlightGear. The easiest ways to do so are:
- either update the timestamp of the XML resource declaration file;
- or remove one or both of the generated files
(FlightGear-resources.cxx and FlightGear-resources.hxx here).
The EmbeddedResourceManager is created in fgMainInit() just after
Options::processOptions() set the language that was either requested by
the user or obtained from the system (locales). Resources from
FlightGear-resources.cxx are added to it, after which
EmbeddedResourceManager::selectLocale() is called with the user's
preferred locale (obtained with FGLocale::getPreferredLanguage()).
Upon reset (fgStartNewReset()), EmbeddedResourceManager::selectLocale()
is called in a similar way after Options::processOptions(), however in
this case the EmbeddedResourceManager instance doesn't have to be
recreated.
Make a single Cmake value to expose the build type to code, and use
this to default a run-time ‘developer-mode’ property, which can be
over-ridden from the command line.
Use this to drive the different warning levels. Policies subject to
review, especially whether nightly builds should default to
developer mode or not.
Uses TTF fonts, and displays more information textually including
the application version and current aircraft.
Also rename FGRenderer::splashinit to preinit, as was suggested
a long time ago.
Each argument creates another log file, in the directory named. Symbolic
value ‘desktop’ creates logs on the user’s desktop.
Needs corresponding SimGear commit to build
- Add an optional argument to flightgear::initApp(): doInitQSettings.
This argument defaults to true, preserving initApp()'s behavior in
this respect. If this argument is set to false, FGGlobals doesn't have
to be initialized.
- New function flightgear::initQSettings(), called by
flightgear::initApp() when its 'doInitQSettings' argument is true.
This allows initializing the QSettings exactly when it is needed.
- New function flightgear::checkKeyboardModifiersForSettingFGRoot().
The code it contains used to be run from initApp(), which is
undesirable because:
1) initApp() is not only called at FG initialization (fgMainInit()),
but also from QtMessageBox(), from QtFileDialog::exec() and twice
from Options::setupRoot(). However, checking the Alt and Shift
modifiers to set 'fg-root' in QSettings to the special value
"!ask" only makes sense in fgMainInit(), not in these other
places.
2) This code relies on the QSettings to be set up, and therefore on
FGGlobals. Thus, freeing initApp() of its dependency on FGGlobals
requires splitting this keyboard modifiers checking code out of
initApp().
Apart from providing a public method giving a path to the autosave file,
the main idea of this commit is to reduce redundancy where
globals->get_fg_home() was so far used in every place where the autosave
file is needed or saved. Use an optional argument for
FGGlobals::loadUserSettings() and FGGlobals::saveUserSettings()[1],
since it should be exceptional to access an autosave file in another
location than $FG_HOME.
Also add comments explaining how to avoid security pitfalls with
saveUserSettings() (cf. discussion around
<https://sourceforge.net/p/flightgear/mailman/message/35461636/>).
[1] Argument *added* to this method, for consistency with
FGGlobals::loadUserSettings().
With Simgear commit d7d59b08a2f1a77a4247ec1a89d6ff48ed73f5c7, this
allows terrasync to be initialised from files in the install data,
which avoids downloading them again.
Remove uses of .str(), .c_str() and some other methods of SGPath.
Pass SGPath directly where possible, or explicitly convert to the
appropriate 8-bit encoding.
When set on the command line, will be used for aircraft packages. When
set in the Qt launcher, will also be used for aircraft downloads at
all times.
When changing the path in the launcher, the set of aircraft catalogs
is refresh automatically. Note the default catalog may need to be
re-installed.
While mostly harmless since you're exiting anyway, it's an annoying
distraction when the real problem is "unexpected exit" (e.g.
https://bugs.debian.org/763285 ), and blocks testing with LeakSanitizer
The old Mac launcher doesn’t work on Yosemite, add a tiny
Qt-based launcher inside the main process (no need to fork /
exec) which runs before the OSG window is created.
Will be merged for 3.4, hopefully with no impact on other
platforms.
