andy
1bc3c5eca0
Yank the sqrt() terms from the twist calculations. They were causing
...
solution failures for reasons I have still to investigate.
2004-02-13 18:12:08 +00:00
ehofman
7da5a741fb
Revert to the previous version because it looks it isn't the friction force after all.
2004-02-13 15:20:13 +00:00
ehofman
c648bc18f7
Make sure the friction forces are positive, otherwise they will push the aircraft rather than holding it into place. The ground reaction code still needs some attention.
2004-02-13 12:54:38 +00:00
curt
71c83c4de7
Initialize autopilot output to start at current manual control position
...
to [hopefully] make autopilot activation less "dramatic."
2004-02-12 22:35:29 +00:00
curt
7f6b36d0d2
Simple hack to allow selectively disabling the hardware flight controls.
2004-02-12 20:56:24 +00:00
curt
6dd88738e4
Clean up headers and lower verbosity.
2004-02-12 20:28:19 +00:00
ehofman
b8ac668719
Add some example remote controll scripts
2004-02-10 15:35:48 +00:00
curt
10fc1ea537
A bit more Makefile massaging.
2004-02-10 15:22:29 +00:00
ehofman
0111069aad
Leave a usable state again.
2004-02-10 15:07:50 +00:00
ehofman
c40ffa503a
Add some example remote controll scripts and make sure at least the perl directory is included in the tarball
2004-02-10 14:38:51 +00:00
curt
228dc97230
Initial revision of some helper functions for remote logging.
2004-02-10 04:42:13 +00:00
andy
fc565ebd86
Put the sqrt(frac) terms back into the wing twist.
2004-02-09 19:53:14 +00:00
andy
85115ef347
Fix the left/right terms in the twist handling to be symmetrical.
2004-02-09 15:18:33 +00:00
david
fbfdc6b987
Updated.
2004-02-07 21:37:54 +00:00
david
633e0fde43
Be a little quieter at the default debug level.
2004-02-07 21:37:35 +00:00
curt
a80d0320d7
Initial revisions.
2004-02-07 03:32:40 +00:00
curt
29b1f376f7
Fix altitude/agl hold display.
2004-02-05 23:49:18 +00:00
curt
bffca78da4
Add my old ultra-simplistic PI controller. The fancy PID controller doesn't
...
seem to be fully deterministic in P-only mode. This old simple controller
does what I expect, so it's good for calulating stage #1 's of multi-stage
controllers.
2004-02-05 17:11:47 +00:00
ehofman
869aa997a5
Initialize the varables *before* reading in the configuration file
2004-02-05 13:47:48 +00:00
curt
266534259d
Add vertical speed fpm conversion since the fdm provides this value in
...
fps.
2004-02-04 20:16:30 +00:00
curt
8191e743f0
Cleaned up some left over stuff. Working towards infrastructure to support
...
adding additional PID type algorithms to the code.
Add support for calculating heading bug error relative to magnetic heading
for slaved DG's.
2004-02-04 17:10:32 +00:00
daveluff
dcf8d93852
Make sure at least one Transform() is performed to set the model position *before* first calling DoGroundElev() in order to avoid polluting the tilemgr with bogus tiles
2004-02-04 17:00:19 +00:00
daveluff
129a9fabe2
Oops - no 3D model assigned to aircraft starting at airports with logical networks
2004-02-04 16:59:04 +00:00
curt
c4bca03ec2
autopilot reinit() now reloads config file.
2004-02-03 20:17:57 +00:00
curt
570ea80a36
Remove stray debugging output.
2004-02-03 19:48:41 +00:00
curt
348d3e26ce
Comment out some unused references and left over debugging output.
2004-02-03 19:34:23 +00:00
ehofman
7ffce3ac6a
Move the new metar class from FlightGear to SimGear
2004-02-02 10:14:20 +00:00
curt
e3a584ffd0
Include compiler.h and config.h first.
2004-02-01 16:50:13 +00:00
curt
da5ea10d5d
Curt Olson:
...
Autopilot overhaul.
2004-01-31 19:47:45 +00:00
andy
5a9c5d80c8
Thrust reversers. Very simple implementation.
2004-01-30 23:21:26 +00:00
ehofman
d3865a9bf9
Check for the precense of truncf rather than hard-wire it in
2004-01-27 09:31:27 +00:00
curt
72f2c5c4f4
Fix a type ...
2004-01-26 22:44:27 +00:00
ehofman
dc5a58fdcf
Alexander Nedotsukov:
...
I just met a couple of warnings about depricated headers beeng used.
Please take a look at patch (against today cvs) attached wich
does strstream -> stringstream migration. I hope you found it usefull.
2004-01-26 20:33:30 +00:00
ehofman
8c129e8470
Make it possible to show the DME in the HUD
2004-01-26 20:24:29 +00:00
ehofman
4fb5e61162
MSVC fixes
2004-01-26 20:06:03 +00:00
andy
e8009ed8fa
Forgot the gear ratio handling in stabilize() method, so the solver
...
got wrong values.
2004-01-25 18:57:11 +00:00
andy
5af1e589de
Wire up a "gear-ratio" attribute for geared propeller aircraft
2004-01-24 23:09:41 +00:00
ehofman
f845aa9b2a
Add Melchior FRANZ's metar class. It is not yet used anywhere (but in the resulting metar executable), but it makes adding live weather quite easy.
2004-01-24 10:38:39 +00:00
ehofman
816d84457c
Reduce the log level to info
2004-01-24 10:36:37 +00:00
ehofman
64cad6a288
Fixes to the kr_87 radio
2004-01-24 10:05:54 +00:00
curt
af66e80358
John Wojnaroski:
...
latest version is attached to reduce need to search property
tree each frame. I don't think this will break any Fg code and
opengc has been updated a while back and have had no complaints ;-) so it
should be a no impact change, hopefully.
2004-01-23 21:02:09 +00:00
daveluff
845ba951e4
Melchior found another way to crash it
2004-01-23 18:38:02 +00:00
ehofman
74d163b51b
Rather define our own truncf implementation for BSD alikes
2004-01-23 18:27:55 +00:00
ehofman
44108678f7
BSD doesn't have truncf(), it does have floorf() however
2004-01-23 18:05:05 +00:00
daveluff
a739fad664
Lots of changes to the ATC/AI system for initial revision of random AI GA VFR traffic
2004-01-23 17:18:24 +00:00
daveluff
afb654a068
Initial revision of class for AI VFR GA traffic
2004-01-23 17:16:15 +00:00
daveluff
4fa02012dc
Don't loose the elevation in ATC projection conversions
2004-01-23 17:14:08 +00:00
ehofman
02cf3373d5
Use fgGetBool to assign a boolean variable
2004-01-23 09:46:56 +00:00
ehofman
863b0c9432
Make the AI models a bit more intelligent. The Gear should be extended and retracted automatically, the navigation lights turn on when sun-angle-rad > 1.57, strobe and beacon are always on and make sure all properties are returned in the right unit format.
2004-01-22 21:13:47 +00:00
ehofman
6ba351cfc6
Make it possible to truncate the result of a number-value text chunk calculation rather than rounding it by specifying <truncate>true</truncate> inside the chunk.
2004-01-22 18:42:42 +00:00