1
0
Fork 0
Commit graph

5957 commits

Author SHA1 Message Date
curt
eef30df0a0 Fix several typos (first time this has been tested since radio/instrumentation
rewrite.)
2004-12-30 20:48:54 +00:00
curt
0b2de7bce0 Remove extraneous property. 2004-12-30 20:48:09 +00:00
curt
8e9f8674a6 Various tweaks to ATC Flight Sim hardware inputs/outputs. 2004-12-30 14:57:58 +00:00
curt
0f8d8bbf05 Add back power button binding, but move the location to /instrumentation/nav
rather than /instrumentation/comm ... we need to be a little careful here
because typically, a single knob controls power to both matched com/nav pairs.
2004-12-30 14:57:12 +00:00
curt
ca80161dcf FGIO::shutdown_all() is called from the FGIO destructor so remove the extra
explicit calls to shutdown_all() which was causing this to be called twice.
This could cause problems with some IO modules (such as attempting to close
an invalid file descriptor the second time.)
2004-12-29 20:40:41 +00:00
curt
3ad6d87576 FGIO::shutdown_all() is called from the FGIO destructor so we don't want
a seperate explicite call or the io channels will be forced to try to shutdown
twice which could cause problems for some IO modules (i.e. attempting to
close an invalid file descriptor the second time ...)
2004-12-29 20:38:17 +00:00
ehofman
982c9e20be Remove an unused Makfefile 2004-12-28 10:18:51 +00:00
daveluff
7793c32f95 Make sure the ATIS reports surface winds at airports above sea-level 2004-12-27 23:55:54 +00:00
ehofman
a7139a816c Durk Talsma:
Fix a couple of places that were not yet using SGPath
2004-12-27 17:35:22 +00:00
ehofman
499c702ffb Mathias Fröhlich:
We should now be able to find
wires or catapults when the ac3d model is loaded without the crease patch
(caused by the much more unstructured scene graph emitted by the old loader).
It should also emit more warnings if the carrier hardware configuration
includes conflicting definitions.
That code is the most intrusive one, it should not be used until you configure
an aircraft carrier as a aimodel. So I think it should be save to apply that
before the release too.
2004-12-27 13:21:18 +00:00
ehofman
afe94f63ea Remove some stale cout commands. 2004-12-27 13:19:28 +00:00
ehofman
18ff3a6108 Make yasim accept the launchbar and hook properties. They are not tied to anything yet though. 2004-12-27 13:18:29 +00:00
curt
5e81b331e1 David Luff:
Attached is a patched runways.cxx.  This fixes the find runway nearest to a given heading code.  This was returning the last runway loaded at a given airport, not the nearest runway to the heading requested (which seems to always be 270deg by default).  I have no idea how this has survived unnoticed for so long - I think it might be because you need to start at an airport with a runway near to 27 and one much greater than 27 eg. 36 to really tickle it, otherwise the runway nearest to 27 tends to be the final one loaded anyway.  Try starting at KARR with and without the patch and note the surface wind.  This should go in before the release.
2004-12-26 23:31:35 +00:00
curt
4ab7603523 Changes to correspond with ATC hardware code changes. 2004-12-24 02:16:05 +00:00
curt
ec82773222 More work on the ATC FS hardware interface. 2004-12-24 01:23:27 +00:00
curt
222446df29 Replace the data/Airports/basic.dat.gz and data/Airports/runways.dat.gz with
a single apt.dat.gz file which is in the native X-Plane format.

To do this I wrote a front end loader than builds the airport and runway
list.  Some of the changes I needed to make had a cascading effect, so there
are minor naming changes scattered throughout the code.
2004-12-22 23:57:07 +00:00
curt
46f9abd791 Updates for upcoming 0.9.8 release. 2004-12-21 23:15:07 +00:00
curt
c362ca795c Updates in preparation for the 0.9.8 release. 2004-12-21 00:16:06 +00:00
ehofman
f541c30e46 gcc 2.95 fix? 2004-12-20 08:36:56 +00:00
ehofman
93e6ebf116 Fix a property path. 2004-12-19 14:32:39 +00:00
ehofman
def25f39d5 gcc 4.0 fixes. 2004-12-18 11:59:33 +00:00
ehofman
127e84cee9 Mathias Fröhlich:
I have a small update which fixes the algorythm used for marking solid
surfaces for some cases where some branch nodes carry the object names I had
expected in the leaf nodes.
That will also introduce the possibility to mark whole subtrees from the
scenegraph solid.
2004-12-18 10:33:36 +00:00
ehofman
9afec17205 A small FreeBSD update. 2004-12-17 20:01:13 +00:00
ehofman
1f6300703e thread detection code cleanup and (hopefuly) FreeBSD fixes. 2004-12-17 14:48:14 +00:00
ehofman
800dad8273 Make sound audiable not until after the scenery is loaded. 2004-12-16 13:19:01 +00:00
ehofman
c09d1c92ca Sync. w. JSBSim CVS 2004-12-16 12:47:20 +00:00
ehofman
33a52bdca2 Fix a typo 2004-12-16 08:52:12 +00:00
andy
28f50df1d5 Support for a new "contra" attribute on propellers, which properly
models them as contra-rotating pairs.
2004-12-13 23:48:43 +00:00
ehofman
8214364414 Mathias Fröhlich:
I still work on getting the YASim models see the detailed environment
especially the carrier.

I have *forgotten* to initialize and to destruct the ground cache object!
Oooopppss!
2004-12-08 14:48:06 +00:00
ehofman
ac27ead4a6 Melchior FRANZ:
The attached patch allows to put comments in *.stg files[1]. Lines with
# in the first column (and only there!) are skipped. This has no effect
on overall performance, but has two advantages:

A) possibility to temporarily comment out objects during scenery design,
   (or to put other remarks there);

B) possibility to put marks like "# BEGIN" and "# END" there that allow
   automated merging of local landmarks etc.

--

[1] actually, comments are possible now, too. But they aren't explicitly
    handled and fgfs tries to parse words in "comments" piece by piece. Ugly!

[2] Idea by Chris METZLER, that I make already use of. I have a local
    scenery dir for some tiles with extra objects, such as VOR/DME for
    all of Austria. These are surrounded by "# BEGIN LOCAL" and "# END LOCAL",
    and today I was able to merge the new 0.9.7 scenery with my locally
    changed files.   :-)
2004-12-08 14:45:47 +00:00
ehofman
7a58ef58e7 MSVC fix 2004-12-05 09:34:03 +00:00
curt
142144a0c3 Update to point to a more generic/current location by default. 2004-12-05 01:16:35 +00:00
curt
75747d3516 A couple more straggling instrumentation clean ups. 2004-12-05 01:04:32 +00:00
curt
c6f0d87a26 A few more radios -> instrumentation name changes thanks to Melchior for
catching these.
2004-12-04 21:06:57 +00:00
curt
a775631226 Create the nodes these modules use if they don't exist already, otherwise
we will segfault when we try to use them later in the routine.
2004-12-03 21:49:21 +00:00
curt
634e79353f Roy Vegard Ovesen:
I've finished the emigration of the radiostack, and I've also removed it
completely. It turned out that the comm radio is completely implemented in
the ATC subsystem. I've changed the affected ATC files to point
to /instrumentation/com, but I guess that the maintainer of the ATC code
should decide wether to make it configureable, and how.

I also had to change some files in Network and Main. The changes in network
should be obvious, but the changes in Main were a bit suspect. The files
included radiostack.hxx, but they weren't directly depending on
radiostack-hxx. They were depending on other files that were included by
radiostack.hxx. I got it to compile, but I'm not sure if I included the
correct directly depending file.

For the data directory I changed every occurrence of /radios/
with /instrumentation/ with this simple one-liner that I found on the net:

find -name '*.xml' -type f | xargs perl -pi -e
's/\/radios\//\/instrumentation\//g'

Instead of me sending all the files that got changed by this I suggest that
you execute the one-liner yourself. Of course I can not guarantee that this
will work perfectly, but I considered hand editing to be not an option (I'm
lazy). I don't want to test every aircraft to see if everything still works,
I think it's better to wait and see if anyone complaints about broken nav
radios/instruments.
2004-12-03 21:21:16 +00:00
ehofman
8ba9f4e3a4 Vivian Meazza:
This is a sub-system which can be added to any carrier.

These files add a functioning Fresnel Lens Optical Landing System (FLOLS).
The orange/red 'source' lights are illuminated according to the position of
the pilot's eye above/below the 3.5 deg glide slope. The apparent position
of the source light relative to the fixed green datum lights allow the pilot
to 'fly the meatball'. The green 'cut' lights flash when the pilot's eye is
below the coverage of the lowest (red) source light.

TODO - add rules for the operation of the wave-off lights.
2004-11-30 12:34:11 +00:00
ehofman
fee003e8cc Melchior FRANZ:
I understand that the new hud/runway feature is still very experimental,
and that the search criteria for the active runway don't necessarily make
much sense. (We are searching for a runway on /sim/presets/airport-id
that matches the current wind direction best, and not the tuned in ILS
runway or something!)

Anyway: the new hud code completely denies the possibility of
globals->get_runways()->search() not finding a runway and returning false.
There's always a runway found at KSFO, but not so at e.g. LOXL, in which
case we are handing garbage over to sg_geodesy.cxx and find ourselves
caught in an endless loop in geo_direct_wgs_84().
2004-11-30 12:14:17 +00:00
ehofman
c537267f96 Durk Talsma:
Okay, here's the latest update to the tarffic manager/AI Manager. AITraffic
can now fly multiple routes and be initialized while sitting statically at
airports.
2004-11-29 09:41:43 +00:00
david
ffafb573b2 Patch from Robert Swam to block enabling stencil at 16 bpp for glut
(allowing FlightGear to work at 16 bpp again for glut users).
2004-11-29 03:17:19 +00:00
ehofman
63c1f4b613 Mathias Fröhlich:
This patch makes the aircraft carrier's hardware  appear in the scenegraph.
2004-11-26 10:24:48 +00:00
curt
91ae7ce82a Add a *really* crude model of ITT, Oil Temp, and Oil Pressure. This
currently just returns a lagged normalized value in the range of 0-1 that
is proportional to N1.  It's up to the engine gauge to scale to the right
range.  This is for lack of a real model of these items so we can have
something to drive the engine gauges.
2004-11-23 21:35:30 +00:00
ehofman
7159e318e1 Mathias Fröhlich:
I have now split out the ground cache functions into src/FDM/groundcache.[ch]xx
Attached are the two files and the patch to integrate that cache into
FGInterface.

The code is nowhere used at the moment, the fdm's need to be updated to use
that ground cache. The JSBSim-dropin.tar.gz from Martins ftp server does this
for example.

The carrier's scenegraph is not yet processed to be visible for ground
intersection testing. So the only benefit up to now is that the api is set
up. Using this I can put the changes to make JSBSim work with that into
JSBSim's cvs. Also I aim to provide Andy a patch to make use of that with
YASim.
2004-11-22 10:10:33 +00:00
curt
16ca655c03 More FreeBSD fixes ... add -lusbhid where needed. 2004-11-21 03:15:19 +00:00
ehofman
4de23ad628 Melchior FRANZ:
Use a suggested exit method as described in the SDL_Quit man page. (fgOSExit() is still uncalled in both fg_os.cxx (glut) and fg_os_sdl.cxx, which makes these functions kind-of useless.) The other changes are fixes for gcc 3.3.4 warnings.
2004-11-20 13:04:26 +00:00
ehofman
b859e77072 MacOS X fix. 2004-11-20 12:47:42 +00:00
ehofman
337d0d1be6 Add some missing bits from Mathias' carrier code. 2004-11-20 12:44:42 +00:00
curt
161fb0c770 Various property name changes relating to moving the kr-87 adf to
/instrumentation
2004-11-19 23:56:12 +00:00
curt
1c2c76709e Roy Ovesen: remove src files from Cockpit and move them over to Instrumentation. 2004-11-19 23:10:44 +00:00
curt
e9b70e3ab8 Changes by Roy Ovesen to begin migrating the avionics out of the Cockpit
directory and over to the Instrumentation directory and make them modular
in the sense of being able to pick and choose what you include with any
particular aircraft.
2004-11-19 23:01:34 +00:00