2000-11-03 23:02:47 +00:00
|
|
|
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
Header: FGTranslation.h
|
|
|
|
Author: Jon Berndt
|
|
|
|
Date started: 12/02/98
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
------------- Copyright (C) 1999 Jon S. Berndt (jsb@hal-pc.org) -------------
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
This program is free software; you can redistribute it and/or modify it under
|
|
|
|
the terms of the GNU General Public License as published by the Free Software
|
|
|
|
Foundation; either version 2 of the License, or (at your option) any later
|
|
|
|
version.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
|
|
|
|
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
|
|
|
|
details.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
|
|
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
|
|
|
|
Place - Suite 330, Boston, MA 02111-1307, USA.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
Further information about the GNU General Public License can also be found on
|
|
|
|
the world wide web at http://www.gnu.org.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
HISTORY
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
12/02/98 JSB Created
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
COMMENTS, REFERENCES, and NOTES
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
[1] Cooke, Zyda, Pratt, and McGhee, "NPSNET: Flight Simulation Dynamic Modeling
|
|
|
|
Using Quaternions", Presence, Vol. 1, No. 4, pp. 404-420 Naval Postgraduate
|
|
|
|
School, January 1994
|
|
|
|
[2] D. M. Henderson, "Euler Angles, Quaternions, and Transformation Matrices",
|
|
|
|
JSC 12960, July 1977
|
|
|
|
[3] Richard E. McFarland, "A Standard Kinematic Model for Flight Simulation at
|
|
|
|
NASA-Ames", NASA CR-2497, January 1975
|
|
|
|
[4] Barnes W. McCormick, "Aerodynamics, Aeronautics, and Flight Mechanics",
|
|
|
|
Wiley & Sons, 1979 ISBN 0-471-03032-5
|
|
|
|
[5] Bernard Etkin, "Dynamics of Flight, Stability and Control", Wiley & Sons,
|
|
|
|
1982 ISBN 0-471-08936-2
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
The order of rotations used in this class corresponds to a 3-2-1 sequence,
|
|
|
|
or Y-P-R, or Z-Y-X, if you prefer.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
SENTRY
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
|
1999-02-05 21:26:01 +00:00
|
|
|
|
|
|
|
#ifndef FGTRANSLATION_H
|
|
|
|
#define FGTRANSLATION_H
|
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
INCLUDES
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
|
1999-02-05 21:26:01 +00:00
|
|
|
|
1999-02-26 22:09:10 +00:00
|
|
|
#ifdef FGFS
|
2000-02-15 03:30:01 +00:00
|
|
|
# include <simgear/compiler.h>
|
2001-06-05 20:58:48 +00:00
|
|
|
# ifdef SG_HAVE_STD_INCLUDES
|
1999-02-26 22:09:10 +00:00
|
|
|
# include <cmath>
|
|
|
|
# else
|
|
|
|
# include <math.h>
|
|
|
|
# endif
|
|
|
|
#else
|
2001-10-05 20:19:59 +00:00
|
|
|
# if defined(sgi) && !defined(__GNUC__)
|
|
|
|
# include <math.h>
|
|
|
|
# else
|
|
|
|
# include <cmath>
|
|
|
|
# endif
|
1999-02-26 22:09:10 +00:00
|
|
|
#endif
|
|
|
|
|
1999-02-11 21:05:34 +00:00
|
|
|
#include "FGModel.h"
|
2001-10-05 20:19:59 +00:00
|
|
|
#include "FGMatrix33.h"
|
|
|
|
#include "FGColumnVector3.h"
|
|
|
|
#include "FGColumnVector4.h"
|
1999-02-05 21:26:01 +00:00
|
|
|
|
2001-03-30 01:04:50 +00:00
|
|
|
#define ID_TRANSLATION "$Id$"
|
2000-10-14 02:10:10 +00:00
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
CLASS DECLARATION
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
|
1999-02-05 21:26:01 +00:00
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
class FGTranslation : public FGModel {
|
1999-02-05 21:26:01 +00:00
|
|
|
public:
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
FGTranslation(FGFDMExec*);
|
2001-03-30 01:04:50 +00:00
|
|
|
~FGTranslation();
|
2002-03-20 12:45:02 +00:00
|
|
|
|
|
|
|
inline double GetUVW (int idx) const { return vUVW(idx); }
|
2001-10-05 20:19:59 +00:00
|
|
|
inline FGColumnVector3& GetUVW (void) { return vUVW; }
|
|
|
|
inline FGColumnVector3& GetUVWdot(void) { return vUVWdot; }
|
2002-03-20 12:45:02 +00:00
|
|
|
inline double GetUVWdot(int idx) const { return vUVWdot(idx); }
|
2002-03-23 00:29:21 +00:00
|
|
|
inline FGColumnVector3& GetAeroUVW (void) { return vAeroUVW; }
|
|
|
|
inline double GetAeroUVW (int idx) const { return vAeroUVW(idx); }
|
1999-02-11 21:05:34 +00:00
|
|
|
|
2002-03-20 12:45:02 +00:00
|
|
|
double Getalpha(void) const { return alpha; }
|
|
|
|
double Getbeta (void) const { return beta; }
|
|
|
|
inline double GetMagBeta(void) const { return fabs(beta); }
|
|
|
|
double Getqbar (void) const { return qbar; }
|
2002-06-08 03:14:03 +00:00
|
|
|
double GetqbarUW (void) const { return qbarUW; }
|
|
|
|
double GetqbarUV (void) const { return qbarUV; }
|
2002-03-20 12:45:02 +00:00
|
|
|
inline double GetVt (void) const { return Vt; }
|
|
|
|
double GetMach (void) const { return Mach; }
|
|
|
|
double Getadot (void) const { return adot; }
|
|
|
|
double Getbdot (void) const { return bdot; }
|
1999-02-11 21:05:34 +00:00
|
|
|
|
2001-10-05 20:19:59 +00:00
|
|
|
void SetUVW(FGColumnVector3 tt) { vUVW = tt; }
|
2002-03-23 00:29:21 +00:00
|
|
|
void SetAeroUVW(FGColumnVector3 tt) { vAeroUVW = tt; }
|
1999-02-11 21:05:34 +00:00
|
|
|
|
2001-11-20 22:34:24 +00:00
|
|
|
inline void Setalpha(double tt) { alpha = tt; }
|
|
|
|
inline void Setbeta (double tt) { beta = tt; }
|
|
|
|
inline void Setqbar (double tt) { qbar = tt; }
|
2002-06-08 03:14:03 +00:00
|
|
|
inline void SetqbarUW (double tt) { qbarUW = tt; }
|
|
|
|
inline void SetqbarUV (double tt) { qbarUV = tt; }
|
2001-11-20 22:34:24 +00:00
|
|
|
inline void SetVt (double tt) { Vt = tt; }
|
|
|
|
inline void SetMach (double tt) { Mach=tt; }
|
|
|
|
inline void Setadot (double tt) { adot = tt; }
|
|
|
|
inline void Setbdot (double tt) { bdot = tt; }
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
2001-11-20 22:34:24 +00:00
|
|
|
inline void SetAB(double t1, double t2) { alpha=t1; beta=t2; }
|
2001-03-30 01:04:50 +00:00
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
bool Run(void);
|
1999-02-05 21:26:01 +00:00
|
|
|
|
2002-03-20 12:45:02 +00:00
|
|
|
void bind(void);
|
|
|
|
void unbind(void);
|
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
private:
|
2001-10-05 20:19:59 +00:00
|
|
|
FGColumnVector3 vUVW;
|
|
|
|
FGColumnVector3 vUVWdot;
|
2002-08-05 20:13:34 +00:00
|
|
|
FGColumnVector3 vUVWdot_prev[3];
|
|
|
|
FGMatrix33 mVel;
|
2001-11-30 17:49:37 +00:00
|
|
|
FGColumnVector3 vAeroUVW;
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
2002-06-08 03:14:03 +00:00
|
|
|
double Vt, Mach;
|
|
|
|
double qbar, qbarUW, qbarUV;
|
2001-11-20 22:34:24 +00:00
|
|
|
double dt;
|
|
|
|
double alpha, beta;
|
|
|
|
double adot,bdot;
|
2001-12-13 04:48:34 +00:00
|
|
|
void Debug(int from);
|
1999-02-05 21:26:01 +00:00
|
|
|
};
|
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
//%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
#endif
|
2001-03-30 01:04:50 +00:00
|
|
|
|