2000-11-03 23:02:47 +00:00
|
|
|
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
Header: FGTranslation.h
|
|
|
|
Author: Jon Berndt
|
|
|
|
Date started: 12/02/98
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
------------- Copyright (C) 1999 Jon S. Berndt (jsb@hal-pc.org) -------------
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
This program is free software; you can redistribute it and/or modify it under
|
|
|
|
the terms of the GNU General Public License as published by the Free Software
|
|
|
|
Foundation; either version 2 of the License, or (at your option) any later
|
|
|
|
version.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
|
|
|
|
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
|
|
|
|
details.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
|
|
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
|
|
|
|
Place - Suite 330, Boston, MA 02111-1307, USA.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
Further information about the GNU General Public License can also be found on
|
|
|
|
the world wide web at http://www.gnu.org.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
HISTORY
|
|
|
|
--------------------------------------------------------------------------------
|
|
|
|
12/02/98 JSB Created
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
COMMENTS, REFERENCES, and NOTES
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
[1] Cooke, Zyda, Pratt, and McGhee, "NPSNET: Flight Simulation Dynamic Modeling
|
|
|
|
Using Quaternions", Presence, Vol. 1, No. 4, pp. 404-420 Naval Postgraduate
|
|
|
|
School, January 1994
|
|
|
|
[2] D. M. Henderson, "Euler Angles, Quaternions, and Transformation Matrices",
|
|
|
|
JSC 12960, July 1977
|
|
|
|
[3] Richard E. McFarland, "A Standard Kinematic Model for Flight Simulation at
|
|
|
|
NASA-Ames", NASA CR-2497, January 1975
|
|
|
|
[4] Barnes W. McCormick, "Aerodynamics, Aeronautics, and Flight Mechanics",
|
|
|
|
Wiley & Sons, 1979 ISBN 0-471-03032-5
|
|
|
|
[5] Bernard Etkin, "Dynamics of Flight, Stability and Control", Wiley & Sons,
|
|
|
|
1982 ISBN 0-471-08936-2
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
1999-02-05 21:26:01 +00:00
|
|
|
The order of rotations used in this class corresponds to a 3-2-1 sequence,
|
|
|
|
or Y-P-R, or Z-Y-X, if you prefer.
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
SENTRY
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
|
1999-02-05 21:26:01 +00:00
|
|
|
|
|
|
|
#ifndef FGTRANSLATION_H
|
|
|
|
#define FGTRANSLATION_H
|
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
INCLUDES
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
|
1999-02-05 21:26:01 +00:00
|
|
|
|
1999-02-26 22:09:10 +00:00
|
|
|
#ifdef FGFS
|
2000-02-15 03:30:01 +00:00
|
|
|
# include <simgear/compiler.h>
|
2001-06-05 20:58:48 +00:00
|
|
|
# ifdef SG_HAVE_STD_INCLUDES
|
1999-02-26 22:09:10 +00:00
|
|
|
# include <cmath>
|
|
|
|
# else
|
|
|
|
# include <math.h>
|
|
|
|
# endif
|
|
|
|
#else
|
2001-10-05 20:19:59 +00:00
|
|
|
# if defined(sgi) && !defined(__GNUC__)
|
|
|
|
# include <math.h>
|
|
|
|
# else
|
|
|
|
# include <cmath>
|
|
|
|
# endif
|
1999-02-26 22:09:10 +00:00
|
|
|
#endif
|
|
|
|
|
1999-02-11 21:05:34 +00:00
|
|
|
#include "FGModel.h"
|
2001-10-05 20:19:59 +00:00
|
|
|
#include "FGMatrix33.h"
|
|
|
|
#include "FGColumnVector3.h"
|
|
|
|
#include "FGColumnVector4.h"
|
1999-02-05 21:26:01 +00:00
|
|
|
|
2001-03-30 01:04:50 +00:00
|
|
|
#define ID_TRANSLATION "$Id$"
|
2000-10-14 02:10:10 +00:00
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
CLASS DECLARATION
|
2000-11-03 23:02:47 +00:00
|
|
|
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
|
1999-02-05 21:26:01 +00:00
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
class FGTranslation : public FGModel {
|
1999-02-05 21:26:01 +00:00
|
|
|
public:
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
FGTranslation(FGFDMExec*);
|
2001-03-30 01:04:50 +00:00
|
|
|
~FGTranslation();
|
1999-02-05 21:26:01 +00:00
|
|
|
|
2001-10-05 20:19:59 +00:00
|
|
|
inline FGColumnVector3& GetUVW (void) { return vUVW; }
|
|
|
|
inline float GetUVW (int idx) { return vUVW(idx); }
|
|
|
|
inline FGColumnVector3& GetUVWdot(void) { return vUVWdot; }
|
|
|
|
inline float GetUVWdot(int idx) { return vUVWdot(idx); }
|
|
|
|
inline FGColumnVector3& GetvAero (void) { return vAero; }
|
|
|
|
inline float GetvAero (int idx) { return vAero(idx); }
|
1999-02-11 21:05:34 +00:00
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
inline float Getalpha(void) { return alpha; }
|
|
|
|
inline float Getbeta (void) { return beta; }
|
|
|
|
inline float Getqbar (void) { return qbar; }
|
|
|
|
inline float GetVt (void) { return Vt; }
|
|
|
|
inline float GetMach (void) { return Mach; }
|
2000-10-10 17:44:35 +00:00
|
|
|
inline float Getadot (void) { return adot; }
|
|
|
|
inline float Getbdot (void) { return bdot; }
|
1999-02-11 21:05:34 +00:00
|
|
|
|
2001-10-05 20:19:59 +00:00
|
|
|
void SetUVW(FGColumnVector3 tt) { vUVW = tt; }
|
1999-02-11 21:05:34 +00:00
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
inline void Setalpha(float tt) { alpha = tt; }
|
|
|
|
inline void Setbeta (float tt) { beta = tt; }
|
|
|
|
inline void Setqbar (float tt) { qbar = tt; }
|
|
|
|
inline void SetVt (float tt) { Vt = tt; }
|
2000-10-02 23:07:30 +00:00
|
|
|
inline void SetMach (float tt) { Mach=tt; }
|
2000-10-10 17:44:35 +00:00
|
|
|
inline void Setadot (float tt) { adot = tt; }
|
|
|
|
inline void Setbdot (float tt) { bdot = tt; }
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
|
|
|
inline void SetAB(float t1, float t2) { alpha=t1; beta=t2; }
|
2001-03-30 01:04:50 +00:00
|
|
|
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
bool Run(void);
|
1999-02-05 21:26:01 +00:00
|
|
|
|
|
|
|
private:
|
2001-10-05 20:19:59 +00:00
|
|
|
FGColumnVector3 vUVW;
|
|
|
|
FGColumnVector3 vUVWdot;
|
|
|
|
FGColumnVector3 vlastUVWdot;
|
|
|
|
FGMatrix33 mVel;
|
|
|
|
FGColumnVector3 vAero;
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
|
2000-04-28 19:59:46 +00:00
|
|
|
float Vt, qbar, Mach;
|
2001-10-05 20:19:59 +00:00
|
|
|
float dt;
|
Updates from the Jon and Tony show.
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
2000-05-16 21:35:11 +00:00
|
|
|
float alpha, beta;
|
2000-10-10 17:44:35 +00:00
|
|
|
float adot,bdot;
|
1999-02-05 21:26:01 +00:00
|
|
|
|
2001-03-30 01:04:50 +00:00
|
|
|
void Debug(void);
|
1999-02-05 21:26:01 +00:00
|
|
|
};
|
|
|
|
|
2000-11-03 23:02:47 +00:00
|
|
|
//%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
|
1999-02-05 21:26:01 +00:00
|
|
|
#endif
|
2001-03-30 01:04:50 +00:00
|
|
|
|