david
d1596cd80e
Make knobs work on the standby frequency rather than the active
...
frequency.
2002-10-25 22:16:57 +00:00
j4strngs
938963e8b8
Stub in generic electrical system on non Cessna planes.
...
Reorder tags in c310 configs for consistency.
Stub in c172 electrical system on Cessnas lacking one.
2002-10-24 03:33:49 +00:00
j4strngs
7d3371137c
Add directory for generic configs for subsystems
2002-10-24 03:31:00 +00:00
curt
d4d5ad1d5d
Set aileron trim to 0.0
...
Rescale TC ball movement for hi res instrument.
2002-10-16 03:17:19 +00:00
j4strngs
a6e5ddd636
beech99-v1 has just a blank line difference. The c172's have
...
the electrical system added so the night lighting works (hey
I do most of my flying at night).
I also added archive flags to some properties as per
c172-set.xml.
2002-10-11 06:23:03 +00:00
j4strngs
4db8d593d7
Add electrical system to c172-ifr. The c172-set.xml was just touched
...
there are no changes to that.
2002-10-11 04:41:35 +00:00
j4strngs
0034d4a2c4
Gas it up and update
2002-10-11 04:36:48 +00:00
j4strngs
97c67cfc82
Put some juice in the fuel tanks.
...
I don't know the capacity so I just dumped 14 gal (I think thats the
wing tank capacity) in each of the 4 defined tanks
2002-10-11 04:10:35 +00:00
david
04679b7f29
Rounded wings more where the air vents will go.
...
Expanded chamber of pitot tube.
2002-09-30 14:04:58 +00:00
david
0e673b222b
Fixed reversed aileron animation.
2002-09-30 14:04:15 +00:00
david
47ce58e5d4
New pitot system and airspeed indicator.
2002-09-28 20:49:56 +00:00
david
1d1770c43f
Modifications to support new VSI and HI models in FlightGear.
2002-09-27 22:00:02 +00:00
david
3b85be3398
Modifications to support new altimeter and static port models in
...
FlightGear.
2002-09-27 18:26:42 +00:00
curt
580ca95e32
Refined some property names for electrical system.
2002-09-25 22:03:51 +00:00
curt
da20738864
Update the hi-res attitude indicator to also use David's new vacuum driven
...
system.
2002-09-25 21:58:20 +00:00
curt
f2ce61faa1
Specify a default c172 electrical system.
2002-09-24 19:54:46 +00:00
david
9979de52f5
Support new attitude indicator with spin-down.
2002-09-24 16:39:53 +00:00
tony
d50ac80260
Updated all JSBSim aircraft config files to new file format
2002-09-24 12:56:05 +00:00
david
37fb178385
Retrimmed for level cruise.
2002-09-23 21:42:34 +00:00
tony
50ba684b84
Latest JSBSim updates, including a thrust-only turbofan model.
2002-09-22 15:21:01 +00:00
david
1dd4620caa
Default to a slightly downward view angle with the 2D panel.
2002-09-20 21:59:26 +00:00
david
8804257902
Use prop_generic2f to get a reasonable propeller.
2002-09-20 20:48:09 +00:00
david
1dbb51e74d
In JSBSim, the c172 model has split into c172p.xml and c172r.xml.
...
Reflect those changes here.
2002-09-20 17:45:00 +00:00
david
e466df8964
Removed unused textures.
2002-09-20 17:41:02 +00:00
jimw
5d2c9fd8cb
Updates to 1903 Flyer. More frame adjustments, engine detailing based on
...
close up photo of an "original". Changed to 3D "cockpit" view.
2002-09-20 02:55:15 +00:00
david
5711fe3949
Improvements to aircraft interior.
2002-09-14 16:25:00 +00:00
jimw
b906dfb973
Added wright flyer model. No textures or animation yet.
2002-09-11 03:09:25 +00:00
david
0799e5f601
Updated settings for C172P (still using the 172R flight model).
2002-09-08 19:20:35 +00:00
david
0fa583feba
Updated with animations, more detail, and new panel.
2002-09-08 19:14:27 +00:00
curt
79c612a893
Set aileron trim for the c310's ... not 100% perfect, but a lot better than
...
taking the C172 default.
2002-09-07 18:37:25 +00:00
mselig
c51c49003b
Marchetti update, MSS
2002-09-07 07:01:40 +00:00
jimw
0367c4cb52
Fixed so that the correct panel is displayed in 2D mode
2002-09-06 03:25:59 +00:00
david
ad929fcc6e
Some more improvements to the 172p model.
2002-09-04 21:33:52 +00:00
mselig
1b698e874d
Removing old -uiuc-set.xml file
2002-09-03 23:45:41 +00:00
mselig
9125b3cd55
Removing old -set.xml file
2002-09-03 23:44:15 +00:00
david
8afa460879
Added seats (not yet textured) and front interior brace bars.
...
Reshaped interior to match photos, with covered luggage bin behind
second seat.
Added more triangles to the panel to round it out.
Moved viewpoint to match up better with seats.
2002-09-02 16:51:47 +00:00
david
aa74b03538
Retrimmed C172 for straight-and-level flight at 3000 ft ASL, 2200 rpm,
...
110 ktas.
2002-09-01 14:44:12 +00:00
david
101d2d6972
Trimmed out the Cub for level cruise by adjusting the fixed aileron
...
and rudder trim. There should not be so much adverse roll now.
2002-08-31 21:11:53 +00:00
curt
408b9f1d0a
Erik Hofman:
...
This updates the sound effects of most aircraft types:
- lowered the flaps volume
- updated the gear-lock location
2002-08-29 18:34:04 +00:00
curt
a6eca0a3e9
Make adf power on/off a seperate property.
2002-08-29 02:18:36 +00:00
curt
742fc098e4
Add a brief description to each *-set.xml file.
2002-08-28 15:00:25 +00:00
david
68a68bb5d1
Lowered default view angle from -5deg to -8deg to get a better
...
starting view of Jim's instruments.
2002-08-24 15:28:55 +00:00
david
f4fa46d878
Started interior.
2002-08-23 18:26:36 +00:00
curt
c3c953a070
Hi-res versions of altimeter and airspeed indicators from Martin Dressler.
...
Use Martin's needle for hi-res rpm and vsi gauges.
2002-08-22 17:38:35 +00:00
curt
771cba4a0f
Hi-res attitude indicator from Martin Dressler.
2002-08-22 16:57:36 +00:00
curt
1a7d04f303
Working on creating some hi-res version of the basic instruments.
2002-08-22 16:28:11 +00:00
curt
18d355ca98
Tweaks to 610x panel layout.
2002-08-22 16:05:58 +00:00
curt
6541dcad19
Updated UFO to have an interesting sound and scale the size a bit more
...
"realistically." :-) This is based on a captured craft from the
"White Project" of the UNESCO.
2002-08-20 18:57:42 +00:00
david
e9bc16e5aa
Added default pilot weight.
...
Use (unfinished) 3D model of a Cub rather than the C172 model.
2002-08-18 18:01:17 +00:00
david
626d78132d
YASim aero model for a Piper J3 Cub.
2002-08-15 22:02:57 +00:00
david
3c14bbfedb
In-progress C172p stuff. Nothing exciting yet.
2002-08-05 18:17:29 +00:00
david
7ad08c1779
Give same viewpoint as JSBSim 3D C172.
2002-08-05 18:09:06 +00:00
david
7f0a64639b
Adjust pilot position.
2002-08-02 21:37:03 +00:00
jimw
2d5a7e7c36
Made some adjustments to ap config. Should reduce tendency to occilate on
...
climbs.
2002-08-02 17:08:43 +00:00
curt
41ba93b4ea
Don't specify a particular fdm/aircraft type.
2002-07-31 21:23:43 +00:00
david
c01d9d77db
Modified the initial view position and angle, based partly on
...
suggestions from Cameron Moore. The pilot view position is now
further back, further to the left, and higher, giving better
visibility over the nose and out the left window for circuits and low
passes (i.e. to see the wind sock). The initial view angle is down
20%. Unfortunately, the default FOV is slightly wide-angle, and the
down view makes that noticeable.
2002-07-31 17:27:57 +00:00
j4strngs
e08a89a37c
King KR-87 ADF radio markup
...
It's a little funky to use right now because
the FRQ and timer buttons should be momentary action.
As it stands you need to do 2 clicks to send on/off.
If anybody can think of a workaround, we could use one.
For now the ADF and BFO buttons just toggle the
annunciators. For ANT mode, I just need to wire up the
ADF needle.
Two clicks on FRQ flip flops the selected and standby
freqs.
Two clicks of FLT/ET will change the standby display
to timer mode and another two will flip between
FLT and ET. If you click and the annunciator flashes
briefly but the display does not change, you need
to click FRQ -one time- to get the button in phase.
ET mode has a count down mode, this is where it really gets tricky.
On the real thing, you hold the SET/RST button for 2 seconds.
Here you must click one time, wait for the display to flash then
click one more time. Now you can set the time to count down.
Right clicking the dial will set minutes, middle click (I know,
I'll make it a keyboard modifier later) sets hours. As usual
the left side decreases and right side increases.
Once you have the desired time set, click the SET/RST button
twice in rapid succession. Two rapid clicks will reset the
elapsed timer when it's counting down, but also while you are
setting it (when display is flashing).
When the count down timer reaches zero, it starts counting up again.
It -should- flash for 15 seconds and set off a warning tone, but
for now it doesn't.
The unit is also equipped with an on/off/volume knob. Whne the
unit is powered down the timers are reset.
TODO:
Add labeling
Wire up ADF needle
Prettier face
2002-07-30 04:03:36 +00:00
j4strngs
b0e9bebdfc
King KR-87 ADF radio texture
2002-07-30 03:42:41 +00:00
jimw
3900be5158
adjustments to a4 model. fixed slats, etc.
2002-07-26 16:13:58 +00:00
curt
b2b507546a
Added 610x varient of the C172. This is exactly like the default C172
...
except that it has a full screen panel with only the 9 'major' 3 inch
instruments plus four 2 inch engine monitoring instruments. This is intended
to go along with a hardware cockpit "someday."
2002-07-20 23:52:33 +00:00
jimw
59d4493b60
adjustments for new panel code
2002-07-12 01:26:28 +00:00
curt
60e61d8cac
Updated glide slope neede so full deflection corresponds to +/- 0.7 degrees
...
of the glide slope.
2002-07-09 22:41:12 +00:00
curt
e5a77ccdb5
Updated adf property name.
2002-07-03 21:39:56 +00:00
curt
f4fc7844df
Various property name changes corresponding to adf overhaul in code.
2002-07-03 21:38:14 +00:00
curt
c4e573ec58
Updates to adf property names.
2002-07-03 19:53:30 +00:00
curt
142df2295c
Minor property name changes reflecting changes on the source code side.
2002-06-30 20:48:53 +00:00
aross
911b2e15ef
Added an AoA indexer to the A-4 cockpit
2002-06-29 06:58:00 +00:00
david
02365a0006
Initial attempt at a (flat) AI bypassing the panel code.
2002-06-28 12:57:29 +00:00
david
1efd590e49
Initial attempt at a (flat) 260kt ASI bypassing the panel code.
2002-06-28 12:56:23 +00:00
david
40252e3a6b
Start work on a C172P, with a new 3D model.
2002-06-28 12:54:39 +00:00
david
99dc046560
Changes to support 3D panel support from Andy Ross.
2002-06-28 12:53:10 +00:00
jimw
d280159eac
model adjustments, changed eye position and panel layout for viewability
...
until a more accurate layout can be done.
2002-06-26 01:17:57 +00:00
jimw
c129802efd
configured some autopilot functionality with existing autopilot code.
2002-06-22 13:54:22 +00:00
jimw
d0f3eb34d6
Minor autopilot adjustments
2002-06-22 03:44:06 +00:00
jimw
099ed38433
change view angle...cockpit update
2002-06-22 03:42:08 +00:00
aross
497056c36d
Added max L/D, approach, and stall indications to the gauge face, and
...
rotated the background to put the approach AoA at the 3 o'clock position,
where the Navy says it should go.
2002-06-20 04:09:28 +00:00
aross
e21cb8ee04
An N1 tachometer, accelerometer, and AoA indicator intended for the A-4 cockpit.
2002-06-20 02:05:59 +00:00
jimw
bd67394792
asi 590 knot for a4c using Andy Ross's face texture
2002-06-20 01:48:21 +00:00
jimw
a49b7bba6f
Add new A4 model startup
2002-06-18 03:20:53 +00:00
jimw
72c3e59a3e
fixed compass rose rotation.
2002-06-18 02:05:51 +00:00
jimw
36184bf394
view position and autopilot adjustment
2002-06-15 22:00:05 +00:00
jimw
e7e7103cb6
Backed out change per John's request
2002-06-11 18:05:23 +00:00
j4strngs
77b0f5ee99
Command line help screen now xml driven
2002-06-11 17:06:28 +00:00
david
7f8b32f98e
Increase the viewing distance for the DC-3.
2002-06-10 11:16:23 +00:00
jimw
c88151c039
Adjustments to autopilot configs
2002-06-07 17:17:10 +00:00
david
0b5fc21dcc
Renamed property /steam/vertical-speed-fpm to /steam/vertical-speed-fps.
2002-06-05 20:41:32 +00:00
jimw
5f4d9898db
Autopilot adjustments. Note that climb rate should be adjusted lower
...
above FL280.
2002-06-03 22:29:07 +00:00
jimw
623123e0d9
Minor adjustment. Value has to be non-zero or default is selected.
2002-05-28 03:05:38 +00:00
jimw
b3308a5d4f
Tweaked sound. Started animation and made a few model adjustments (still many more left to do).
2002-05-28 02:41:36 +00:00
mselig
8df329737c
Marchetti update
2002-05-27 05:38:20 +00:00
mselig
f75ade0c16
beech 99 date fix
2002-05-27 04:45:40 +00:00
mselig
2ac0c3cc78
hang glider date fix
2002-05-27 04:45:22 +00:00
mselig
a41c5c60a0
adding 1903 Wright Flyer
2002-05-27 04:37:47 +00:00
jimw
655718f49e
Added textures to 747-400 model
2002-05-26 03:32:10 +00:00
mselig
af9be781fb
adding hang glider
2002-05-26 01:45:53 +00:00
mselig
6cd7ba4676
beech 99 model update
2002-05-26 01:14:13 +00:00
jimw
a9848e1295
Started Boeing 747-400 model
2002-05-25 01:41:21 +00:00
jimw
0db4b45b7f
Moved eye up a couple inches so you can fly VFR
2002-05-09 02:37:49 +00:00
jimw
cf0c66bca0
Configured autopilot
2002-05-09 02:35:44 +00:00
jimw
0fb13d0aeb
corrected offsets for yasim version (made same as jsbsim version)
2002-05-09 02:34:48 +00:00
