Changes deflection input variables to match nasal lowpass filter
output for cdi and gs needle deflections. I did a search of the
data/Aircraft to make sure this will not break other ac.
Added GS out of range flag to Instruments-3d/vor.
Century III upgrades
1. Implemented the two 20 sec checks for GS arm documented in the autopilot POH page 30.
2. Fixed bug that made GS capture not work if the ALT switch was turned off for a few moments to do a step-down approach.
Changes:
1. remove typo from all the /Systems/KAP140.xml files
2. changes to put radio_stack in Instruments-3d
3. Add "pick" to vor, alt, hi, in Instruments-3d
4. changes to pa24-250 and pa28-161 to use 2 and 3.
5. add "pick" and "2d text in window" in 3d OAT in pa24-250
1. Added a pilot.
2. Cleaned up the panel, added a working park brake lever, added the
remaining placards, added "materials lighting for the remaining
switches and knobs tied to the nave light switch.
3. Doubled the resolution of the transparent rgb, added propdisc spin,
and realigned all in the ac file so the spin was concentric.
I put 3 patches and a sound file in this tar. The c172p... patch
removes an unnecessary patch I submitted to the c172p. It has no affect
on performance. The Instruments-3d... patch adds a working skid ball to
the tc and switches the vor xmls to using params so it is easier to
edit. It also constrains the glide-slope needle to -32 to 32 degrees.
The pa24-250... patch fixes an edit error (corrects a misnamed switch
"click", no change in performance) and adds a "squish" sound to the
primer pump action.
feature I added to the navcom-kx155.xml and the dme.xml in the
Instruments folder. I wanted to leave the frequencies, etc. on these
dark until there was voltage applied to
/systems/electrical/outputs/nav. This was accomplished by adding a
param and property alias pointing to the appropriate value. Since the
c172p "always" applies 28 volts, this made no change in the c172p, but
allowed me to model the avionics master and battery master realisticly
in pa24-electrical.nas. I put in comments explaining this at the change
points.
There is a useful "help > aircraft help" that walks you through the
start procedure and lists the key bindings as well as the key to "light
up" the hot spots.
I have modeled N7764P, the comanche 250 I co-own with 2 other Seagate engineers.
In the process of doing this model, I have also improved, worked on, or added
instruments, etc. to Instruments-3d.
* I fixed the adf so the azimuth card is tied to the correct property
* Added TO, From, and out-of range indicators to the 3d vor.
* Also added a manifold pressure gage and a pa24-250 asi (using digital photos
of the actual asi as the starting textures.
Affects on other AC. As far as I know, this will add to-from to the vor and
correct the adf behavior for pa28-161. It would be a trivial edit to the
pa28-161.xml to give the same vor performance to that AC.
Now both VORs act as one.
