Trigger sets /controls/armament/trigger - typically for a gun, but can be used (model side) to launch anything
Pick sets /controls/armament/pickle - typically to release something (e.g. missiles), but could be bound model side to act as a trigger.
Definitely problems in aar.nas, seaport.nas; as these were hanging off a fdm-initialized.
The others have timers that are started from a listener and as such are more suited to use maketimer rather than settimer
The modules that use the loopid technique are probably fine, but these are also more suited (and easier to understand) using a maketimer
- modify to work with JSBSim aircraft when reloading the fuel based on the payload (e.g. external tanks selected)
- add property sim/gui/dialogs/payload-reload that when set will cause the payload dialog to reload (to support a second dialog that modifies the payload)
- fix so that the window retains its position (close handler) and window Z order when reloading.
- added extra bindings
- reworked the view axis (usually bound to the hat); to move at a better rate.
- trim to elevator position. When selected this will remember the current position and when the joystick is centered it will apply this as the trim. Very useful for carrier approaches; and also it helps to do something that is much easier with loaded controls when you can feel the pressure being reduced by the operations of the trim switch
Checklists now support grouping by placing a group of checklists
under a <group> node.
e.g. /sim/checklists/group/checklist
The group can have a <name>, which is used by the checklist dialog
and can be used by other interfaces, such as the FG1000.
- Engines control now use the same axis methods as the flight controls; which allows for these to have an inverted checkbox.
- Change the axis combo boxes to instead show a popup dialog (much like the button config). This is better because the items can be grouped sensibly.
- Changed the way that the "all engines" controls work - the dialog binds these to a "engines/XXXX-all" for which there is a listener in controls.nas which propogates over all engines.
- Added extra bindings to both the buttons and the axis dialogs.
- moved the "None" button to the bottom and renamed it to the more comprehensible "Remove assignment"
The add-on framework now uses the following files in each add-on
directory:
- addon-config.xml (previously: config.xml)
- addon-main.nas (previously: main.nas)
This is consistent with the addon-metadata.xml file that is already part
of the interface between FG core and add-ons. The goal is to make it
clearer, when browsing an add-on directory, which files belong to the
"FG core <-> add-on" interface and which files belong to the add-on
proper. This will be beneficial also when more files are added to the
"FG core <-> add-on" interface, such as possibly addon-events.xml in the
future.
This change is incompatible, thus it is the right time to do *before*
2018.2.1 is out, especially considering that this upcoming release
already has incompatible changes in the add-on API, namely the
requirement of the addon-metadata.xml file and the type of the argument
passed to each add-on's main() function. We'll try harder not to break
compatibility in the add-on API once 2018.2.1 is out. For now, it is
still a good time to try to get the API as clean as possible.
Change /sim/multiplay/transmit-only-generics to /sim/multiplay/transmit-filter-property-base, which can be 1 to transmit only generics, or a number greater than 1 to indicate the start index to transmit (e.g. 12000 for new emesary mp bridge properties)
ConfigStore for storing and retrieving config settings (needs XML import/export)
Header display with 4 different header fields (all configurable)
Publisher for ADC and FMS.
The addons.Addon instance (ghost) is much more interesting than its base
path. The base path is immediately accessible from the addons.Addon
instance using its 'basePath' attribute. The addons.Addon instance
allows main() to easily access essentially all of the add-on metadata,
including the add-on identifier, which makes it possible to write
main.nas without hardcoding the add-on id at all.
This is an incompatible change of course, so better do it now than
later.
- Add new Emesary notification type for NAV/COM data
- Create Update/Publish interfaces using Emesary from properties
- Use interfaces to drive updates to EIS and NAV/COM frequencies
- Change the PageGroupController to a "proper" MFD page
- DTO MapStructure layer to provide a DTO line to a lat/lon
- Support for scrolling lists in the PFD/GroupElement
- Support MAP (NavigationMap) and ENGINE (EIS) soft-keys from other pages.
By separating out the bridges this could be used in the future to transmit Emesary properties at a different rate. It is one of the future possible methods to improve MP communications and dual/multi controls
Also:
- use the namespace __addon[ADDON_ID]__ when loading an add-on's
main.nas file (previously, the namespace used was __addon[i]__ where
i is 0 for the first registered add-on, 1 for the second one, etc.);
- use logprint() instead of printlog(), because the former writes a
more helpful source file and line number for the log call in
fgfs.log (i.e., not always src/Scripting/NasalSys.cxx...);
- remove the listener once it has been fired;
- add documentation in Docs/README.add-ons.
A GeoEventNotification can be used to notify all other MP craft (that are connected to the bridge) of AI objects or ballistic items that are present on the local player's machine. For example tankers, dropped payloads, missiles, carriers.
Changes
- Fix transfer string encoding for bridge. If the string contained untransmittable characters the length was wrong. Change to use the valid characters from BinaryTransfer.
- Fix bug transferring negative numbers.
- Add method to notification to provide the type key to be used to decide if a non distinct message should be added to the queue; rather than relying on the simple type.ident. This allows multiple notifications of the same type to be non distinct but also be transmitted
- Allow the maximum size of the mp string to be defined per bridge; rather than a system wide value. This allows the bridges to have their size tuned to match expected requirements; for example a bridge that is transmitting GeoEventNotification may need a lot more space than a bridge that is transmitting property sync notifications.
- Improve error message when out of space (due to the maximum string length)
- add trace option to bridges to aid debugging of transmitted values. This will produce verbose output.
- Add UniqueIndex to GeoEventNotification; to allow for multiple non-distinct notifications to be transmitted concurrently. This overrides the GetBridgeMessageNotificationTypeKey to include the UniqueIndex
Allow a MFD to be controlled via Emesary notifications (notifications.PFDEventNotification);
Notification needs to be constructed with the following parameters;
1 - MFD designation (text; name of MFD)
2 - MFD identity (int, id of the MFD within the model). Default 1; same as used when creating the MFD
3 - Event type (PFDEventNotification.SoftKeyPushed, notifications.PFDEventNotification.ChangeMenuText
4 - Event parameter.
a) for PFDEventNotification.SoftKeyPushed an int identifying the button
b) for notifications.PFDEventNotification.ChangeMenuText a hash array containing the menu ID and the new text (e.g. [{ Id: 1, Text: "NNN"}])
Method obj.PFD.RegisterWithEmesary(emesary.GlobalTransmitter) need to be called to connect the MFD to a transmitter
Change fonts; make use of the new feature to allow fonts to be specified using property from dialog xml.
Ensure that all fonts are defined within the style.
Manage updates when a value has changed more than a predetermined amount. This makes updating displays (e.g. canvas), or performing actions based on a property (or value in a hash) changing by more than the preset amount.
The primary goal of this work is to provide a alternative to multiplayer property transmission, one that is more efficient and event driven. By using notifications in the model bindings these control messages can be bridged and do not require extra code to implement dual controls.
Using this alternative permits the modeller much greater control of which properties are transmitted, how these are encoded, and how often the updates are needed.
Please remember that this is a use case for Emesary, it is not all that Emesary can provide and there are still many other uses for the event driven object oriented system that Emesary provides.
Briefly the changes are:
- New PropertySyncNotificationBase to permit property transfer between ownship and MP versions using notifications instead of the pre-defined MP messages. This gives a much more flexible way to seutp multiplayer property transfer - and can probably support more properties because of the more efficient packing. There is a corresponding parameter (/sim/multiplay/transmit-only-generics) that will only transmit the bare minimum of parameters; making more space for notifications.
- new AircraftControlNotification to allow for animation bindings in the model, these notifications can be easily bridged over MP thus adding a simple method to implement dual controls.
- more efficient packing of encoded notifications over MP saving roughly 30% (by using a much larger encoding space and also changing to use fixed length encoding). This breaks compatibility with previous MP bridges, however at this time I don't think anything is using the current code.
There can be different types of PropertySyncNotification (with unique ID's) sent at a different schedule (so you could have a 10 second update of very slow moving items). However bear in mind that the messages have a lifetime of 10 seconds to ensure receipt - so to optimise space would require > 15 seconds to make much difference, and that is very slow moving.
<message> tags can now contain sprintf() format
strings (%d, %.2f etc), with
<message-param>
<property>/some/prop</property>
</message-param>
used as the substitute value. Could be extended
in the future with perhaps Nasal evaluation?
Don't use the built-in SVG/rect parser, since this bypasses creating
coordinate / command properties which some Canvas users rely upon.
This reverts commit 57a2d21ddf.
- properly referencing the canvas namespace, so that the ND module can be separately included via io.include()
- moving the initialization of aircraft specific SVG elements into the navdisplay.styles file, and the corresponding Boeing/Airbus entries there (see initialize_elements())
Emesary is a simple and efficient class based interobject communcation system to allow decoupled disparate parts of a system to function together without knowing about each. It allows decoupling and removal of dependencies by using notifications to cause actions or to query values.
Emesary is all about decoupling and removing dependecies, and improving the structure of code. Using Emesary you can more easily define the what rather than the how. By using what is essential an event driven system it is easy to add or remove modules, and also for extra modules to be inserted that the rest of the aircraft knows nothing about (e.g. FGCamera or the Walker).
see: http://chateau-logic.com/content/emesary-nasal-implementation-flightgear
The AN/SPN-46 is an ACLS implementation using Emesary. ACLS is the Navy's version of ILS.
---------------------------------------------------------------------------
There is also support for transmitting messages over MP which allows models to communicate with each other in a decoupled method using notifications. What happens is that bridged messags simply arrive at the Receive method of recipients in other models on other running instances without the need to do anything special.
This links together the generic MFD and the NavDisplay; it allows a fairly easy method to add a Map page to an MFD device.
----------------------
See: http://wiki.flightgear.org/Canvas_MFD_Framework
----------------------
Instantiate parameters:
1. pfd_device (instance of PFD_Device)
2. instrument display ident (e.g. mfd-map, or mfd-map-left mfd-map-right for multiple displays) - used to map to the property tree
3. layer_id: main layer in the SVG
4. nd_group_ident : group (usually within the main layer) to place the NavDisplay
5. [optional] switches - used to connect the property tree to the nav display. see the canvas nav display.
To add a canvas nav display page simply do
me.some_page = PFD_NavDisplay.new(me.PFD,"Situation", "mpcd-sit", "ID", "jtids_main");
Emesary is a simple and efficient class based interobject communcation system to allow decoupled disparate parts of a system to function together without knowing about each. It allows decoupling and removal of dependencies by using notifications to cause actions or to query values.
Emesary is all about decoupling and removing dependecies, and improving the structure of code. Using Emesary you can more easily define the what rather than the how. By using what is essential an event driven system it is easy to add or remove modules, and also for extra modules to be inserted that the rest of the aircraft knows nothing about (e.g. FGCamera or the Walker).
see: http://chateau-logic.com/content/emesary-nasal-implementation-flightgear
The AN/SPN-46 is an ACLS implementation using Emesary. ACLS is the Navy's version of ILS.
At the suggestion of Gilberto AGOSTINHO, add
button bindings for throttle, mixture and prop
to the joystick configuration dialog.
Specific use-case is users of game-pads, but also
useful to users with a single throttle axis on their
joystick.
- make t/T action press and hold, with some acceleration factor and
clamping to a maximum rate. (Avoids confusing latching-mode of
previous system(
- show the local time of day while adjusting.
Values are based on some experimentation, feedback welcome on the
mailing list.
- Since joystick.PropertyScaleAxis instances have a 'prop' attribute
indicating the property name, it seems logical to have
joystick.PropertyScaleAxis.parse() set this attribute based on the
property name in its argument ('p').
- This commit also tries to improve readability by using a 'bindingNode'
variable instead of repeatedly calling 'p.getNode("binding", 1)'.
- Commit 5bcf58c7d6 forgot to set the
'inverted' attribute when there was no 'factor' node in the argument's
'binding' node. Fix this.
- Also copy the argument's 'factor' value to the 'factor' instance
attribute for consistency, since joystick.PropertyScaleAxis instances
have such an attribute initialized in the constructor.
As far as I can tell, the dead-band setting belongs to <axis> nodes, not
to <binding> nodes using property-scale. This can be seen in
do_property_scale()'s definition (flightgear/src/Main/fg_commands.cxx)
as well as in fgdata/Docs/README.Joystick.html.
joystick.PropertyScaleAxis creates <dead-band> nodes as children of
<binding> nodes in generated joystick binding files under
$FG_HOME/Input/Joysticks which, AFAICT, are completely useless and thus
confusing. The <dead-band> nodes should be created at a different level
to be effective (cf. FGJoystickInput::postinit() in
flightgear/src/Input/FGJoystickInput.cxx).
This commit removes the 'deadband' attribute from
joystick.PropertyScaleAxis, since it has nothing to do there IMHO.
As can be seen in do_property_scale()'s definition in
flightgear/src/Main/fg_commands.cxx, property-scale rightfully uses a
default factor of 1.0. However, if a joystick axis' property-scale
binding has no 'factor' node defined, and one opens the joystick
configuration dialog, then PropertyScaleAxis.parse() creates an empty
'factor' node that implicitely gets a value of 0. This method is called
by joystick.readConfig() when the joystick-config dialog is opened. This
has the effect of rendering the corresponding joystick axis inoperant.
How to reproduce the bug:
- take a joystick such as the SAITEK CYBORG 3D USB, with its default
binding file from
fgdata/Input/Joysticks/Saitek/Cyborg-Gold-3d-USB.xml (this file uses
property-scale for the aileron, with no explicitely defined factor);
- start FlightGear; move the joystick left or right while looking at
the plane wings -> the ailerons move, it works fine;
- now, open the joystick-config dialog and do the same test -> the
ailerons don't move anymore and the 'Aileron' value at the bottom of
the dialog stays at 0 (0.0 or -0.0...). Just opening the dialog to
test the joystick has "corrupted" its setup! This is very confusing
for users.
This fix corrects the problem by avoiding the apparently unneeded
creation of an empty 'factor' node when there is none inside the
<binding>. An alternative would be to create a 'factor' node with value
1.0. In any case, if someone later expands the joystick-config dialog to
allow modification of property-scale's factor, he should make sure to
use a default value of 1.0!
I created a substantial quantity of new work in the New Regional
Textures project and I would like to ask if anyone could review and
perhaps commit them into FGDATA. The modifications are:
- New textures and material definitions for California
- New textures and material definitions for Mexico
- New material definitions for Central America
- New textures and material definitions for Southern Europe
(Mediterranean region: Portugal, Spain, south of Italy, Greece, coast of
Balkans)
- New airport grass texture (global)
- New airport grass texture for Latin America
- New American town texture (global)
- Small improvement to grass blade textures (to better fit the airport
grass texture)
If this will be committed, we must add a note thanking the United States
Geological Survey (USGS) for the satellite images of California (
http://www.usgs.gov/ ) to the Thanks file.
