jimw
0db4b45b7f
Moved eye up a couple inches so you can fly VFR
2002-05-09 02:37:49 +00:00
jimw
cf0c66bca0
Configured autopilot
2002-05-09 02:35:44 +00:00
jimw
0fb13d0aeb
corrected offsets for yasim version (made same as jsbsim version)
2002-05-09 02:34:48 +00:00
tony
8341ac3832
Experimental c172 with hysteresis lift curve
2002-05-04 14:37:45 +00:00
david
5e2acf230c
Change goal-tilt-deg to pitch-offset-deg.
2002-05-01 20:28:55 +00:00
j4strngs
9a1d987db6
start integrating UIUC stuff into Aircraft/.
2002-04-30 22:24:03 +00:00
david
c7a28a2483
Init script and tacky UFO model (from me) to go with Jonathan Polley's
...
UFO FDM.
2002-04-25 13:24:36 +00:00
jimw
c757477902
fix for minor propeller modeling problem
2002-04-24 17:31:44 +00:00
jimw
c7a8eabeec
Updated U3-A model. New props, Blinking taillight, misc fixes.
2002-04-24 00:42:03 +00:00
jimw
693b963bfb
Added flag "allow-toggle-cockpit" so that 3d/2d toggle is not attempted for
...
aircraft that do not have 3d cockpit configured. Toggling is done with the
"c" key. Note also that for now, since the 3d models don't have a "small"
panel defined, the "s" key is disabled if "allow-toggle-cockpit" is true.
2002-04-21 15:06:22 +00:00
jimw
db78ac8380
Had to make Z offset 1cm, problem in PilotOffset dialog
2002-04-21 00:46:39 +00:00
jimw
16b81bd59b
Adjustments to U3-A model
2002-04-20 20:18:11 +00:00
jimw
f2e52d921a
First pass at U3-A 3d cockpit (--aircraft=c310u3a-3d)
2002-04-20 18:30:23 +00:00
j4strngs
9893da939c
Added keyboard binding to toggle between 2/3D cockpit
2002-04-19 23:47:16 +00:00
curt
f468d9362d
Jim Wilson:
...
These are the updates for the View manager properties. Removed the last of
items (within the viewer/viewmgr) hard coded to view number. Added support
for per view configuration of ground level nearplane value. Tower views look
very nice with little or no z-buffer problem in the models. Pilot offset
dialog can be used to move eye in all views.
2002-04-18 14:52:32 +00:00
david
2364ef0d33
Initial 3D cockpit setup for YASim.
2002-04-16 11:19:03 +00:00
j4strngs
2e34702365
bound brake indicator to parking brake
2002-04-11 23:47:08 +00:00
david
564cffd08f
Use the C172 3-D model for now, until a C182 3-D model is available.
2002-04-09 10:48:56 +00:00
david
39bfe1a71b
Set the default aileron trim for the JSBSim Cessna 172 to -0.055.
...
This is sufficient to keep the wings level in cruise at 3000 ft, 2200
RPM; the value will have to change as we make changes to the model.
Note that a stock Cessna 172 does not have an aileron-trim wheel
inside the cockpit; to set the trim, you actually bend a sheet of
metal by hand when the plane is on the ground.
2002-04-09 10:48:26 +00:00
david
75b6d83520
Accidentally deleted.
2002-04-04 22:03:45 +00:00
david
2f38b429f5
Raised the default eyepoint and slanted it down slightly. Previously,
...
the pilot was peering level just over the top of the panel.
Moved the panel instruments accordingly.
2002-04-03 22:55:30 +00:00
david
f1d8a47660
Jim's modified C172 set file.
2002-03-25 16:28:16 +00:00
j4strngs
27591fed86
New c310u3a panel by Jim Wilson
2002-03-22 01:23:34 +00:00
david
a615df5d53
A little more detail on the C172 interior, starting to approach
...
something that's recognizably a panel.
2002-03-16 17:00:30 +00:00
david
d947b64c73
Renamed /cockpit property to /sim/view/internal and made properties
...
explicitly archivable to help with save/restore (the latter is a
temporary measure).
2002-03-15 20:54:25 +00:00
david
e720339b7c
Tweaked view position in 3D cockpit so that the runway is visible
...
during taxi and takeoff roll.
2002-03-13 23:42:18 +00:00
david
0c4eb61e7c
C172 with highly experimental, unfinished 3-D cockpit mockup using
...
Andy's virtual-panel support. This will give a first taste of flying
with a 3D cockpit, but there are many caveats:
1. Clicking on the instruments doesn't work (waiting for a fix from
Andy).
2. The instruments rotate with the 3D cockpit but they don't tilt with
it (also waiting for a fix from Andy).
3. The orientation is incorrect when the view is not straight-forwards
and the plane is not flying level (waiting for a fix from me, but I
don't understand matrix math well enough).
4. The 3D interior is fairly ugly right now.
2002-03-10 21:09:39 +00:00
j4strngs
a222c7492b
Change default model
2002-03-08 05:28:03 +00:00
j4strngs
97ea096701
Marchetti config from Martin Spott
2002-03-08 05:27:16 +00:00
david
20b35dd15a
Removed obsolete properties.
2002-03-08 02:29:10 +00:00
j4strngs
755ea63cda
c310u3a FGFS'ercized by Jim Wilson from a model by Chris Lampard. Jim has managed to track down Chris, who has graciously allowed us to distribute the model under the GPL
2002-03-07 06:09:21 +00:00
david
57eecbf2ff
Moved to FlightGear/docs-mini
2002-03-03 00:16:13 +00:00
david
2522bdba92
Initial support for jet sounds, from Erik Hofman.
2002-03-02 23:50:07 +00:00
david
8a6e3e409a
New Cessna 310 model, still incomplete (no proper gear and no
...
textures). Most animations are working, but they're using the
/controls/* properties, so flap movement isn't smooth.
2002-03-01 23:04:02 +00:00
david
e519594b5c
Modified to use C310 sounds for now, to get twin engine support.
2002-03-01 14:27:38 +00:00
david
ee3e969fee
Modified for Erik's sound-configuration changes.
2002-02-27 14:37:24 +00:00
david
6ad4d75137
Added Erik Hofman's documentation on sound configuration files.
2002-02-27 14:36:59 +00:00
david
835092ae6a
Changes from Erik Hofman adding per-aircraft sound-configuration files
...
and renaming /sim/sound to /sim/sound/audible. So far, there are
sound config files only for the C172, C182, and C310; we'll have to
add them for other aircraft.
2002-02-27 14:22:05 +00:00
david
00f404d5a9
Changed to point to an XML property file rather than directly to the
...
3D file.
2002-02-25 19:10:16 +00:00
j4strngs
4873b9e7ae
Orientation fixes for people dropping in the defined model
2002-02-25 00:13:56 +00:00
david
821b1e6652
Switch to use c172-dpm.ac by default, so that new users don't end up
...
with the glider. The old model path, pointing to an MDL file that had
to be downloaded separately, is commented out but is still present.
2002-02-22 18:58:47 +00:00
j4strngs
b49abb2b79
new turn coordinator tube n' ball
2002-02-22 00:26:13 +00:00
curt
246bd8f7db
This one should use the LED font as well.
2002-02-20 04:07:56 +00:00
david
4c07d3e314
Ensure that the magnetos are engaged at startup.
...
*** I accidentally posted this comment for the updates in
Aircraft-yasim -- those actually add support for starter and magnetos.
2002-02-20 03:32:03 +00:00
curt
20d0f8ea7d
Update clock to use LED font now that Melchior has added a ":" to the
...
font.
2002-02-19 12:27:22 +00:00
curt
b3a6290fab
Converted to LED font.
2002-02-19 04:20:06 +00:00
curt
64155f6531
Specify LED font for radio displays.
2002-02-19 02:43:28 +00:00
david
14680a0c80
Patch from Melchior Franz:
...
Since a while I get a line of black pixel garbage below the labels "WL" and
"ALT" on the autopilot. Does anybody else see this? (Or is it a feature of
my graphics card? :-) The following patch fixes this for me.
2002-02-18 18:16:00 +00:00
j4strngs
ae0fd9eee1
toggle action on gear and brake indicators. Not realistic, but useful nonetheless
2002-02-14 06:09:47 +00:00
david
f3c71fea0d
Modified piston aircraft to start with engine(s) idling. This makes
...
sense for a default start on the runway.
2002-02-13 20:03:24 +00:00
