2016-02-10 21:32:19 +00:00
<?xml version="1.0" encoding="UTF-8"?>
<PropertyList >
<name > Preflight</name>
<description >
Before the flight you have to assure that your aircraft is in a good condition
This tutorial will guide you through the Preflight inspection
</description>
<audio-dir > Tutorials/preflight</audio-dir>
<timeofday > morning</timeofday>
<presets >
2016-05-18 21:11:05 +00:00
<airport-id > LELL</airport-id>
2016-02-10 21:32:19 +00:00
<on-ground > 1</on-ground>
2016-05-18 21:11:05 +00:00
<runway > 13</runway>
2016-02-10 21:32:19 +00:00
<altitude-ft > -9999</altitude-ft>
2016-05-18 21:11:05 +00:00
<latitude-deg > 41.52158426</latitude-deg>
<longitude-deg > 2.100607724</longitude-deg>
<heading-deg > 40</heading-deg>
2016-02-10 21:32:19 +00:00
<airspeed-kt > 0</airspeed-kt>
<glideslope-deg > 0</glideslope-deg>
<offset-azimuth-deg > 0</offset-azimuth-deg>
<offset-distance-nm > 0</offset-distance-nm>
</presets>
<step >
<set >
<property > /sim/model/c172p/securing/allow-securing-aircraft</property>
<value > true</value>
</set>
<set >
<property > /engines/active-engine/running</property>
<value > false</value>
</set>
<set >
<property > /instrumentation/adf/frequencies/selected-khz</property>
2016-05-18 21:11:05 +00:00
<value > 367</value>
2016-02-10 21:32:19 +00:00
</set>
<set >
<property > /environment/weather-scenario</property>
<value > Fair weather</value>
</set>
<set >
<property > /controls/flight/elevator-trim</property>
<value > 0.17</value>
</set>
<set >
<property > /controls/engines/engine/primer</property>
<value > 0</value>
</set>
<set >
<property > /controls/engines/engine/primer-lever</property>
<value > false</value>
</set>
<set >
<property > /controls/switches/master-alt</property>
<value > false</value>
</set>
<set >
<property > /controls/switches/master-bat</property>
<value > false</value>
</set>
<set >
<property > /controls/switches/magnetos</property>
<value > 0</value>
</set>
<set >
<property > /controls/switches/master-avionics</property>
<value > false</value>
</set>
<set >
<property > /controls/lighting/taxi-light</property>
<value > false</value>
</set>
<set >
<property > /controls/lighting/landing-lights</property>
<value > false</value>
</set>
<set >
<property > /controls/anti-ice/pitot-heat</property>
<value > false</value>
</set>
<set >
<property > /controls/lighting/nav-lights</property>
<value > false</value>
</set>
<set >
<property > /controls/lighting/beacon</property>
<value > false</value>
</set>
<set >
<property > /controls/lighting/strobe</property>
<value > false</value>
</set>
<set >
<property > /controls/anti-ice/engine/carb-heat</property>
<value > false</value>
</set>
<set >
<property > /controls/lighting/instruments-norm</property>
<value > 0</value>
</set>
<set >
<property > /controls/engines/engine/throttle</property>
<value > 0</value>
</set>
<set >
<property > /controls/engines/current-engine/throttle</property>
<value > 0</value>
</set>
<set >
<property > /controls/engines/engine/mixture</property>
<value > 0</value>
</set>
<set >
<property > /controls/flight/flaps</property>
<value > 0</value>
</set>
<set >
<property > /consumables/fuel/tank[0]/selected</property>
<value > true</value>
</set>
<set >
<property > /consumables/fuel/tank[1]/selected</property>
<value > true</value>
</set>
<set >
<property > /sim/model/c172p/brake-parking</property>
2016-05-18 21:11:05 +00:00
<value > 1</value>
2016-02-10 21:32:19 +00:00
</set>
<set >
<property > /sim/model/hide-yoke</property>
<value > false</value>
</set>
<set >
<property > /sim/model/door-positions/baggageDoor/position-norm</property>
<value > 0</value>
</set>
<set >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0</value>
</set>
<set >
<property > /sim/model/door-positions/rightDoor/position-norm</property>
<value > 0</value>
</set>
<set >
<property > /sim/model/c172p/securing/chock</property>
<value > true</value>
</set>
<set >
<property > /sim/model/c172p/securing/tiedownL-visible</property>
<value > true</value>
</set>
<set >
<property > /sim/model/c172p/securing/tiedownR-visible</property>
<value > true</value>
</set>
<set >
<property > /sim/model/c172p/securing/tiedownT-visible</property>
<value > true</value>
</set>
<set >
<property > /sim/model/c172p/securing/pitot-cover-visible</property>
<value > true</value>
</set>
<set >
<property > sim/model/c172p/engine_flag_0</property>
<value > 1</value>
</set>
<set >
<property > sim/model/c172p/engine_flag_1</property>
<value > 0</value>
</set>
<set >
<property > /controls/engines/active-engine</property>
<value > 0</value>
</set>
<set >
<property > sim/model/c172p/bushkit_flag_0</property>
<value > 1</value>
</set>
<set >
<property > sim/model/c172p/bushkit_flag_1</property>
<value > 0</value>
</set>
<set >
<property > sim/model/c172p/bushkit_flag_2</property>
<value > 0</value>
</set>
<set >
<property > sim/model/c172p/bushkit_flag_3</property>
<value > 0</value>
</set>
<set >
<property > sim/model/c172p/bushkit_flag_4</property>
<value > 0</value>
</set>
<set >
<property > fdm/jsbsim/bushkit</property>
<value > 0</value>
</set>
<set >
<property > /controls/engines/current-engine/throttle</property>
<value > 0</value>
</set>
2016-05-18 21:11:05 +00:00
<message > Welcome to Sabadell Airport. In this lesson we'll check the condition of our aircraft.</message>
2016-02-10 21:32:19 +00:00
<view >
<heading-offset-deg > 0.0</heading-offset-deg>
<pitch-offset-deg > -12</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.21</x-offset-m>
<y-offset-m > 0.19</y-offset-m>
<field-of-view > 73.6</field-of-view>
</view>
<wait > 10</wait>
</step>
<step >
<message > First we'll check the cockpit and after that we will walk around the aircraft.</message>
<wait > 10</wait>
</step>
<step >
<message > Verify that the Pilot Operating Handbook is available in the cockpit.</message>
<view >
<heading-offset-deg > 8.5</heading-offset-deg>
<pitch-offset-deg > -43.3</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.2</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 0.4</z-offset-m>
<field-of-view > 82.2</field-of-view>
</view>
<marker >
<x-m > -0.3066</x-m>
<y-m > -0.4207</y-m>
<z-m > -0.4769</z-m>
<scale > 9.0000</scale>
</marker>
<wait > 7</wait>
</step>
<step >
<message > The Parking brake has to be set (lever points down).</message>
<view >
<heading-offset-deg > 1.3</heading-offset-deg>
<pitch-offset-deg > -41.9</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.2</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 0.4</z-offset-m>
<field-of-view > 50.1</field-of-view>
</view>
<marker >
<x-m > -0.3092</x-m>
<y-m > -0.1992</y-m>
<z-m > -0.3284</z-m>
<scale > 3.4667</scale>
</marker>
<error >
<message > Set the parking brake.</message>
<condition >
<not >
<property > sim/model/c172p/brake-parking</property>
</not>
</condition>
</error>
<exit >
<condition >
<property > sim/model/c172p/brake-parking</property>
</condition>
</exit>
</step>
<step >
<message > The magneto switch (ignition) must be off.</message>
<view >
<heading-offset-deg > 9.8</heading-offset-deg>
<pitch-offset-deg > -28.4</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.3</x-offset-m>
<y-offset-m > -0.1</y-offset-m>
<z-offset-m > 0.2</z-offset-m>
<field-of-view > 48.4</field-of-view>
</view>
<marker >
<x-m > -0.3500</x-m>
<y-m > -0.3600</y-m>
<z-m > -0.2700</z-m>
<scale > 2.0000</scale>
</marker>
<error >
<message > Switch off the ignition.</message>
<condition >
<greater-than >
<property > /controls/switches/magnetos</property>
<value > 0</value>
</greater-than>
</condition>
</error>
<exit >
<condition >
<equals >
<property > /controls/switches/magnetos</property>
<value > 0</value>
</equals>
</condition>
</exit>
</step>
<step >
<message > The Avionics power switch must be off, too.</message>
<view >
<heading-offset-deg > 4.9</heading-offset-deg>
<pitch-offset-deg > -28.1</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.3</x-offset-m>
<y-offset-m > -0.1</y-offset-m>
<z-offset-m > 0.2</z-offset-m>
<field-of-view > 48.4</field-of-view>
</view>
<marker >
<x-m > -0.3600</x-m>
<y-m > -0.3230</y-m>
<z-m > -0.2660</z-m>
<scale > 1.7000</scale>
</marker>
<error >
<message > To prevent the avionics from getting damaged during startup, switch off the avionics.</message>
<condition >
<property > /controls/switches/master-avionics</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > /controls/switches/master-avionics</property>
</not>
</condition>
</exit>
</step>
<step >
<message > Switch the battery on.</message>
<view >
<heading-offset-deg > 9.2</heading-offset-deg>
<pitch-offset-deg > -24.3</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.35</x-offset-m>
<y-offset-m > -0.08</y-offset-m>
<z-offset-m > 0.2</z-offset-m>
<field-of-view > 48.4</field-of-view>
</view>
<marker >
<x-m > -0.3500</x-m>
<y-m > -0.3967</y-m>
<z-m > -0.2283</z-m>
<scale > 2.0413</scale>
</marker>
<error >
<message > We now want to check the fuel level, so you have to switch the battery on.</message>
<condition >
<not >
<property > /controls/switches/master-bat</property>
</not>
</condition>
</error>
<exit >
<condition >
<property > /controls/switches/master-bat</property>
</condition>
</exit>
</step>
<step >
<message > Check the fuel level, whether there is enough fuel available for your planned flight.</message>
<view >
<heading-offset-deg > 8.3</heading-offset-deg>
<pitch-offset-deg > -17.5</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.3</x-offset-m>
<y-offset-m > 0.0</y-offset-m>
<z-offset-m > 0.2</z-offset-m>
<field-of-view > 48.4</field-of-view>
</view>
<marker >
<x-m > -0.3608</x-m>
<y-m > -0.4036</y-m>
<z-m > -0.0147</z-m>
<scale > 2.8812</scale>
</marker>
<wait > 10</wait>
</step>
<step >
<message > Switch the battery off again.</message>
<view >
<heading-offset-deg > 9.2</heading-offset-deg>
<pitch-offset-deg > -24.3</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.35</x-offset-m>
<y-offset-m > -0.08</y-offset-m>
<z-offset-m > 0.2</z-offset-m>
<field-of-view > 48.4</field-of-view>
</view>
<marker >
<x-m > -0.3500</x-m>
<y-m > -0.3967</y-m>
<z-m > -0.2283</z-m>
<scale > 2.0413</scale>
</marker>
<error >
<message > To save energy, switch off the battery.</message>
<condition >
<property > /controls/switches/master-bat</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > /controls/switches/master-bat</property>
</not>
</condition>
</exit>
</step>
<step >
<message > The Fuel Selector Valve has to be set to both.</message>
<view >
<heading-offset-deg > 325.1</heading-offset-deg>
<pitch-offset-deg > -63.9</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.2</x-offset-m>
<y-offset-m > -0.0</y-offset-m>
<z-offset-m > 0.1</z-offset-m>
<field-of-view > 48.4</field-of-view>
</view>
<marker >
<x-m > -0.2383</x-m>
<y-m > -0.0017</y-m>
<z-m > -0.6467</z-m>
<scale > 7.4667</scale>
</marker>
<error >
<message > Select both fuel tanks (forward position).</message>
<condition >
<not >
<and >
<property > /consumables/fuel/tank[0]/selected</property>
<property > /consumables/fuel/tank[1]/selected</property>
</and>
</not>
</condition>
</error>
<exit >
<condition >
<and >
<property > /consumables/fuel/tank[0]/selected</property>
<property > /consumables/fuel/tank[1]/selected</property>
</and>
</condition>
</exit>
</step>
<step >
<message > We're finished with checking the cockpit. Now let's step out and inspect the exterior.</message>
<view >
<heading-offset-deg > 335.6</heading-offset-deg>
<pitch-offset-deg > -21.1</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.3</x-offset-m>
<y-offset-m > 0.3</y-offset-m>
<z-offset-m > 0.4</z-offset-m>
<field-of-view > 105.1</field-of-view>
</view>
<wait > 7</wait>
</step>
<step >
<message > Open the door.</message>
<view >
<heading-offset-deg > 59.4</heading-offset-deg>
<pitch-offset-deg > -49.2</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.1</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 0.2</z-offset-m>
<field-of-view > 67.4</field-of-view>
</view>
<marker >
<x-m > -0.0201</x-m>
<y-m > -0.4496</y-m>
<z-m > -0.2327</z-m>
<scale > 2.3427</scale>
</marker>
<error >
<message > Open the door!</message>
<condition >
<less-than >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0.8</value>
</less-than>
</condition>
</error>
<exit >
<condition >
<greater-than >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0.8</value>
</greater-than>
</condition>
</exit>
</step>
<step >
<message > Close the door.</message>
<view >
<heading-offset-deg > 328.8</heading-offset-deg>
<pitch-offset-deg > -20.9</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -1.3</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 1.1</z-offset-m>
<field-of-view > 85.0</field-of-view>
</view>
<marker >
<x-m > 0.3584</x-m>
<y-m > -1.2496</y-m>
<z-m > -0.1327</z-m>
<scale > 4.3427</scale>
</marker>
<error >
<message > Close the door!</message>
<condition >
<greater-than >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0.4</value>
</greater-than>
</condition>
</error>
<exit >
<condition >
<less-than >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0.4</value>
</less-than>
</condition>
</exit>
</step>
<step >
<message > Remove the pitot tube cover.</message>
<view >
<heading-offset-deg > 140.0</heading-offset-deg>
<pitch-offset-deg > 3.9</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.9</x-offset-m>
<y-offset-m > 0.4</y-offset-m>
<z-offset-m > -1.0</z-offset-m>
<field-of-view > 85.0</field-of-view>
</view>
<marker >
<x-m > -0.2000</x-m>
<y-m > -1.5190</y-m>
<z-m > 0.4471</z-m>
<scale > 3.1983</scale>
</marker>
<error >
<message > To enable the Airspeed Indicator to show something, you have to remove the pitot tube cover.</message>
<condition >
<property > sim/model/c172p/securing/pitot-cover-visible</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > sim/model/c172p/securing/pitot-cover-visible</property>
</not>
</condition>
</exit>
</step>
<step >
<message > You have to check if the fuel is contaminated with water. Take a fuel sample.</message>
<view >
<heading-offset-deg > 140.0</heading-offset-deg>
<pitch-offset-deg > 3.9</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.6</x-offset-m>
<y-offset-m > 0.4</y-offset-m>
<z-offset-m > -1.0</z-offset-m>
<field-of-view > 85.0</field-of-view>
</view>
<nasal >
<script > fgcommand("dialog-show", props.Node.new({"dialog-name": "c172p-left-fuel-sample-dialog"}));</script>
</nasal>
<error >
<message > To prevent the engine from failing the fuel must not contain any water. You have to take a sample of the fuel.</message>
<condition >
<not >
<property > /consumables/fuel/tank[0]/fuel-sample-taken</property>
</not>
</condition>
</error>
<exit >
<condition >
<property > /consumables/fuel/tank[0]/fuel-sample-taken</property>
</condition>
</exit>
</step>
<step >
<message > If the sample is light blue, the fuel isn't contaminated and you can return it to the tank. If it's transparent, it's contaminated: You have to discard it.</message>
<wait > 10</wait>
<error >
<message > There's still water in the fuel. Discard the sample and take a new one.</message>
<condition >
<greater-than >
<property > /consumables/fuel/tank[0]/water-contamination</property>
<value > 0.0</value>
</greater-than>
</condition>
</error>
<exit >
<condition >
<equals >
<property > /consumables/fuel/tank[0]/water-contamination</property>
<value > 0.0</value>
</equals>
</condition>
</exit>
</step>
<step >
<message > The fuel is light blue. You can return the sample to the tank.</message>
<error >
<message > Return the sample to the tank!</message>
<condition >
<property > /consumables/fuel/tank[0]/fuel-sample-taken</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > /consumables/fuel/tank[0]/fuel-sample-taken</property>
</not>
</condition>
</exit>
</step>
<step >
<message > Remove the left tie-down.</message>
<view >
<heading-offset-deg > 140.0</heading-offset-deg>
<pitch-offset-deg > -13.2</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -1.7</x-offset-m>
<y-offset-m > 0.4</y-offset-m>
<z-offset-m > -0.8</z-offset-m>
<field-of-view > 85.0</field-of-view>
</view>
<marker >
<x-m > 0.0413</x-m>
<y-m > -2.2727</y-m>
<z-m > 0.3959</z-m>
<scale > 4.5041</scale>
</marker>
<nasal >
<script > fgcommand("dialog-close", props.Node.new({"dialog-name": "c172p-left-fuel-sample-dialog"}));</script>
</nasal>
<error >
<message > You have to remove the tie-down, or you can't fly away!</message>
<condition >
<property > sim/model/c172p/securing/tiedownL-visible</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > sim/model/c172p/securing/tiedownL-visible</property>
</not>
</condition>
</exit>
</step>
<step >
<message > Left wing: Not damaged. Landing light, strobe and red nav light ok. Wingtip ok.</message>
<view >
<heading-offset-deg > 233.7</heading-offset-deg>
<pitch-offset-deg > -5.9</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -6.9</x-offset-m>
<y-offset-m > 0.9</y-offset-m>
<z-offset-m > -1.2</z-offset-m>
<field-of-view > 55.3</field-of-view>
</view>
<wait > 7</wait>
</step>
<step >
<message > Left aileron: Check for freedom of movement.</message>
<view >
<heading-offset-deg > 280.0</heading-offset-deg>
<pitch-offset-deg > 11.4</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -5.9</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 1.1</z-offset-m>
<field-of-view > 55.3</field-of-view>
</view>
<wait > 10</wait>
</step>
<step >
<message > Left main wheel: Tire pressure ok. No leaking brake fluid.</message>
<view >
<heading-offset-deg > 316.2</heading-offset-deg>
<pitch-offset-deg > -37.8</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -2.2</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 1.6</z-offset-m>
<field-of-view > 72.0</field-of-view>
</view>
<wait > 7</wait>
</step>
<step >
<message > Baggage door: Closed and locked.</message>
<view >
<heading-offset-deg > 283.9</heading-offset-deg>
<pitch-offset-deg > -13.4</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -2.2</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 2.3</z-offset-m>
<field-of-view > 72.0</field-of-view>
</view>
<marker >
<x-m > 1.8083</x-m>
<y-m > -0.4521</y-m>
<z-m > -0.4000</z-m>
<scale > 5.0000</scale>
</marker>
<error >
<message > Close the baggage door!</message>
<condition >
<not-equals >
<property > /sim/model/door-positions/baggageDoor/position-norm</property>
<value > 0.0</value>
</not-equals>
</condition>
</error>
<exit >
<condition >
<equals >
<property > /sim/model/door-positions/baggageDoor/position-norm</property>
<value > 0.0</value>
</equals>
</condition>
</exit>
</step>
<step >
<message > Empennage: Not damaged. Beacon light ok. Also check elevator and rudder for freedom of movement.</message>
<view >
<heading-offset-deg > 325.1</heading-offset-deg>
<pitch-offset-deg > -0.7</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -2.4</x-offset-m>
<y-offset-m > 0.4</y-offset-m>
<z-offset-m > 8.4</z-offset-m>
<field-of-view > 61.0</field-of-view>
</view>
<wait > 10</wait>
</step>
<step >
<message > Remove the rear tie-down.</message>
<view >
<heading-offset-deg > 323.3</heading-offset-deg>
<pitch-offset-deg > 0.5</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -1.0</x-offset-m>
<y-offset-m > -0.6</y-offset-m>
<z-offset-m > 6.0</z-offset-m>
<field-of-view > 53.5</field-of-view>
</view>
<marker >
<x-m > 4.9132</x-m>
<y-m > -0.1835</y-m>
<z-m > -0.7075</z-m>
<scale > 3.0000</scale>
</marker>
<error >
<message > You have to remove the tie-down, or you can't fly away!</message>
<condition >
<property > sim/model/c172p/securing/tiedownT-visible</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > sim/model/c172p/securing/tiedownT-visible</property>
</not>
</condition>
</exit>
</step>
<step >
<message > Right main wheel: Tire pressure ok. No leaking brake fluid.</message>
<view >
<heading-offset-deg > 43.8</heading-offset-deg>
<pitch-offset-deg > -37.8</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > 2.2</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 1.6</z-offset-m>
<field-of-view > 72.0</field-of-view>
</view>
<wait > 7</wait>
</step>
<step >
<message > Right aileron: Check for freedom of movement.</message>
<view >
<heading-offset-deg > 80.0</heading-offset-deg>
<pitch-offset-deg > 11.4</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > 5.9</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 1.1</z-offset-m>
<field-of-view > 55.3</field-of-view>
</view>
<wait > 10</wait>
</step>
<step >
<message > Right wing: Not damaged. Strobe and red nav light ok. Wingtip ok.</message>
<view >
<heading-offset-deg > 126.3</heading-offset-deg>
<pitch-offset-deg > -5.9</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > 6.9</x-offset-m>
<y-offset-m > 0.9</y-offset-m>
<z-offset-m > -1.2</z-offset-m>
<field-of-view > 55.3</field-of-view>
</view>
<wait > 7</wait>
</step>
<step >
<message > Remove the right tie-down.</message>
<view >
<heading-offset-deg > 220.0</heading-offset-deg>
<pitch-offset-deg > -13.2</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > 1.7</x-offset-m>
<y-offset-m > 0.4</y-offset-m>
<z-offset-m > -0.8</z-offset-m>
<field-of-view > 85.0</field-of-view>
</view>
<marker >
<x-m > 0.0041</x-m>
<y-m > 2.2388</y-m>
<z-m > 0.4050</z-m>
<scale > 3.0000</scale>
</marker>
<error >
<message > You have to remove the tie-down, or you can't fly away!</message>
<condition >
<property > sim/model/c172p/securing/tiedownR-visible</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > sim/model/c172p/securing/tiedownR-visible</property>
</not>
</condition>
</exit>
</step>
<step >
<message > You have to check if the fuel is contaminated with water. Take a fuel sample.</message>
<view >
<heading-offset-deg > 220.0</heading-offset-deg>
<pitch-offset-deg > 3.9</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > 0.6</x-offset-m>
<y-offset-m > 0.4</y-offset-m>
<z-offset-m > -1.0</z-offset-m>
<field-of-view > 85.0</field-of-view>
</view>
<nasal >
<script > fgcommand("dialog-show", props.Node.new({"dialog-name": "c172p-right-fuel-sample-dialog"}));</script>
</nasal>
<error >
<message > To prevent the engine from failing the fuel must not contain any water. You have to take a sample of the fuel.</message>
<condition >
<not >
<property > /consumables/fuel/tank[1]/fuel-sample-taken</property>
</not>
</condition>
</error>
<exit >
<condition >
<property > /consumables/fuel/tank[1]/fuel-sample-taken</property>
</condition>
</exit>
</step>
<step >
<message > If the sample is light blue, the fuel isn't contaminated and you can return it to the tank. If it's transparent, it's contaminated: You have to discard the it.</message>
<wait > 10</wait>
<error >
<message > There's still water in the fuel. Discard the sample and take a new one.</message>
<condition >
<greater-than >
<property > /consumables/fuel/tank[1]/water-contamination</property>
<value > 0.0</value>
</greater-than>
</condition>
</error>
<exit >
<condition >
<equals >
<property > /consumables/fuel/tank[1]/water-contamination</property>
<value > 0.0</value>
</equals>
</condition>
</exit>
</step>
<step >
<message > The fuel is light blue. You can return the sample to the tank.</message>
<error >
<message > Return the sample to the tank!</message>
<condition >
<property > /consumables/fuel/tank[1]/fuel-sample-taken</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > /consumables/fuel/tank[1]/fuel-sample-taken</property>
</not>
</condition>
</exit>
</step>
<step >
<message > Check the oil level.</message>
<view >
<heading-offset-deg > 110.7</heading-offset-deg>
<pitch-offset-deg > -19.6</pitch-offset-deg>
<roll-offset-deg > 0.1</roll-offset-deg>
<x-offset-m > 1.4</x-offset-m>
<y-offset-m > 0.5</y-offset-m>
<z-offset-m > -1.2</z-offset-m>
<field-of-view > 79.6</field-of-view>
</view>
<nasal >
<script > fgcommand("dialog-close", props.Node.new({"dialog-name": "c172p-right-fuel-sample-dialog"}));</script>
</nasal>
<nasal >
<script > fgcommand("dialog-show", props.Node.new({"dialog-name": "c172p-oil-dialog-160"}));</script>
</nasal>
<error >
<message > The oil level is too low. Refill some oil, or you will risk an engine damage!</message>
<condition >
<less-than-equals >
<property > /engines/active-engine/oil-level</property>
<value > 6.0</value>
</less-than-equals>
</condition>
</error>
<exit >
<condition >
<greater-than >
<property > /engines/active-engine/oil-level</property>
<value > 6.0</value>
</greater-than>
</condition>
</exit>
</step>
<step >
<message > The oil level is good.</message>
<wait > 3</wait>
</step>
<step >
<message > Propeller/Spinner: Not damaged, securely mounted. Air intake free.</message>
<view >
<heading-offset-deg > 220.0</heading-offset-deg>
<pitch-offset-deg > -21.5</pitch-offset-deg>
<roll-offset-deg > 0.1</roll-offset-deg>
<x-offset-m > -1.3</x-offset-m>
<y-offset-m > 0.3</y-offset-m>
<z-offset-m > -3.0</z-offset-m>
<field-of-view > 77.0</field-of-view>
</view>
<nasal >
<script > fgcommand("dialog-close", props.Node.new({"dialog-name": "c172p-oil-dialog-160"}));</script>
</nasal>
<wait > 10</wait>
</step>
<step >
<message > Nose wheel: Tire pressure ok. Shock absorber alright. Strut not damaged.</message>
<view >
<heading-offset-deg > 229.8</heading-offset-deg>
<pitch-offset-deg > -15.4</pitch-offset-deg>
<roll-offset-deg > 0.1</roll-offset-deg>
<x-offset-m > -1.3</x-offset-m>
<y-offset-m > -0.5</y-offset-m>
<z-offset-m > -2.1</z-offset-m>
<field-of-view > 77.0</field-of-view>
</view>
<wait > 10</wait>
</step>
<step >
<message > Remove the wheel chocks.</message>
<view >
<heading-offset-deg > 248.6</heading-offset-deg>
<pitch-offset-deg > -25.1</pitch-offset-deg>
<roll-offset-deg > 0.1</roll-offset-deg>
<x-offset-m > -1.3</x-offset-m>
<y-offset-m > -0.5</y-offset-m>
<z-offset-m > -1.5</z-offset-m>
<field-of-view > 77.0</field-of-view>
</view>
<marker >
<x-m > -1.3199</x-m>
<y-m > -0.3240</y-m>
<z-m > -1.0273</z-m>
<scale > 5.3471</scale>
</marker>
<error >
<message > You must remove the wheel chocks before the flight!</message>
<condition >
<property > sim/model/c172p/securing/chock</property>
</condition>
</error>
<exit >
<condition >
<not >
<property > sim/model/c172p/securing/chock</property>
</not>
</condition>
</exit>
</step>
<step >
<message > We've finished our inspection round. Open the door.</message>
<view >
<heading-offset-deg > 306.1</heading-offset-deg>
<pitch-offset-deg > -16.6</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -1.8</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 1.3</z-offset-m>
<field-of-view > 59.1</field-of-view>
</view>
<marker >
<x-m > 0.7642</x-m>
<y-m > -0.5199</y-m>
<z-m > -0.2063</z-m>
<scale > 3.0204</scale>
</marker>
<error >
<message > Open the door!</message>
<condition >
<less-than >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0.8</value>
</less-than>
</condition>
</error>
<exit >
<condition >
<greater-than >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0.8</value>
</greater-than>
</condition>
</exit>
</step>
<step >
<message > Close the door.</message>
<view >
<heading-offset-deg > 51.7</heading-offset-deg>
<pitch-offset-deg > -30.1</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.2</x-offset-m>
<y-offset-m > 0.2</y-offset-m>
<z-offset-m > 0.4</z-offset-m>
<field-of-view > 75.0</field-of-view>
</view>
<marker >
<x-m > 0.0678</x-m>
<y-m > -0.6091</y-m>
<z-m > -0.1025</z-m>
<scale > 2.3223</scale>
</marker>
<error >
<message > Close the door!</message>
<condition >
<greater-than >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0.4</value>
</greater-than>
</condition>
</error>
<exit >
<condition >
<less-than >
<property > /sim/model/door-positions/leftDoor/position-norm</property>
<value > 0.4</value>
</less-than>
</condition>
</exit>
</step>
<step >
2016-11-12 21:32:27 +00:00
<set >
<property > /nasal/tutorial/loaded</property>
<value > false</value>
</set>
2016-02-10 21:32:19 +00:00
<message > Perfect, you're finished. The aircraft is in a good condition, and you're ready to start the engine.</message>
<view >
<heading-offset-deg > 0.0</heading-offset-deg>
<pitch-offset-deg > -12</pitch-offset-deg>
<roll-offset-deg > 0.0</roll-offset-deg>
<x-offset-m > -0.21</x-offset-m>
<y-offset-m > 0.19</y-offset-m>
<field-of-view > 73.6</field-of-view>
</view>
</step>
</PropertyList>
