322 lines
14 KiB
Text
322 lines
14 KiB
Text
#### A320 Landing Gear System ####
|
|
#### Jonathan Redpath ####
|
|
#### v.0.4 ####
|
|
|
|
|
|
var lgciu_one_init = func {
|
|
setprop("controls/lgciu[0]/mlgleftpos",1); #0 = retracted, 1 = extended
|
|
setprop("controls/lgciu[0]/mlgrightpos",1); #0 = retracted, 1 = extended
|
|
setprop("controls/lgciu[0]/nlgpos",1); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[0]/doors/mlgleft",0); #0 = closed, 1 = open
|
|
setprop("controls/lgciu[0]/doors/mlgright",0); #0 = closed, 1 = open
|
|
setprop("controls/lgciu[0]/doors/nlg",0); #0 = closed, 1 = open
|
|
setprop("/controls/lgciu[0]/gearlever",1); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[0]/mlgleft/isdownlock",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/mlgright/isdownlock",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/nlg/isdownlock",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/mlgleft/isuplock",0); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/mlgright/isuplock",0); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/nlg/isuplock",0); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/hyd/greensupply",0); #0 = no, 1 = yes presently no supply as green pump is off
|
|
setprop("/controls/lgciu[0]/wow/isongroundl",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/wow/isongroundn",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/wow/isongroundr",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[0]/nws/nwsenabled",0); #0 = disabled 1 = enabled, must be disabled for push
|
|
setprop("/controls/lgciu[0]/inuse",1); #the LGCIUs switch between eachother on each gear cycle. eg if one LGCIU fails put the gear down and bring them up again to reset
|
|
setprop("/controls/lgciu[0]/hasbeenret",0); #has the gear been retracted with LGCIU1?
|
|
setprop("/controls/lgciu[0]/fail",0); #0 = no 1 =
|
|
setprop("/controls/lgciu[0]/emermanext","0"); #0 = no 3 = extended can only be retracted if green hyd is available. crank must be turned 3 times clockwise so this has quotes
|
|
setprop("/controls/lgciu[0]/cargo/fwd/lock",1);
|
|
setprop("/controls/lgciu[0]/cargo/aft/lock",1);
|
|
setprop("/controls/lgciu[0]/cargo/bulk/lock",1);
|
|
setprop("/controls/lgciu[0]/cargo/fwd/open",0);
|
|
setprop("/controls/lgciu[0]/cargo/aft/open",0);
|
|
setprop("/controls/lgciu[0]/cargo/bulk/open",0);
|
|
}
|
|
|
|
var lgciu_two_init = func {
|
|
setprop("controls/lgciu[1]/mlgleftpos",1); #0 = retracted, 1 = extended
|
|
setprop("controls/lgciu[1]/mlgrightpos",1); #0 = retracted, 1 = extended
|
|
setprop("controls/lgciu[1]/nlgpos",1); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[1]/doors/mlgleft",0); #0 = closed, 1 = open
|
|
setprop("controls/lgciu[1]/doors/mlgright",0); #0 = closed, 1 = open
|
|
setprop("controls/lgciu[1]/doors/nlg",0); #0 = closed, 1 = open
|
|
setprop("/controls/lgciu[1]/gearlever",1); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[1]/mlgleft/isdownlock",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/mlgright/isdownlock",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/nlg/isdownlock",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/mlgleft/isuplock",0); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/mlgright/isuplock",0); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/nlg/isuplock",0); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/hyd/greensupply",0); #0 = no, 1 = yes presently no supply as green pump is off
|
|
setprop("/controls/lgciu[1]/wow/isongroundl",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/wow/isongroundn",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/wow/isongroundr",1); #0 = no, 1 = yes
|
|
setprop("/controls/lgciu[1]/nws/nwsenabled",0); #0 = disabled 1 = enabled, must be disabled for push
|
|
setprop("/controls/lgciu[1]/inuse",0); #the LGCIUs switch between eachother on each gear cycle. eg if one LGCIU fails put the gear down and bring them up again to reset
|
|
setprop("/controls/lgciu[1]/hasbeenret",0); #has the gear been retracted with LGCIU2?
|
|
setprop("/controls/lgciu[1]/fail",0); #0 = no 1 = yes
|
|
setprop("/controls/lgciu[1]/emermanext","0"); #0 = no 3 = extended can only be retracted if green hyd is available. crank must be turned 3 times clockwise so this has quotes
|
|
setprop("/controls/lgciu[0]/init",1); #these two properties say that 'everything is ready now'
|
|
setprop("/controls/lgciu[1]/init",1);
|
|
setprop("/controls/lgciu[1]/cargo/fwd/lock",1);
|
|
setprop("/controls/lgciu[1]/cargo/aft/lock",1);
|
|
setprop("/controls/lgciu[1]/cargo/bulk/lock",1);
|
|
setprop("/controls/lgciu[1]/cargo/fwd/open",0);
|
|
setprop("/controls/lgciu[1]/cargo/aft/open",0);
|
|
setprop("/controls/lgciu[1]/cargo/bulk/open",0);
|
|
}
|
|
|
|
var BSCU_init = func {
|
|
setprop("/controls/BSCU/hyd/greensupply",0);
|
|
setprop("/controls/BSCU/nws/ruddlim","6");
|
|
setprop("/controls/BSCU/nws/tilllim","70");
|
|
setprop("/controls/BSCU/nws/enabled",0);
|
|
setprop("/controls/BSCU/nws/pedalsdisc",0);
|
|
setprop("/controls/BSCU/fail/nws",0);
|
|
setprop("/controls/BSCU/fail/askid",0);
|
|
setprop("/controls/BSCU/fail/BSCU",0);
|
|
setprop("/controls/BSCU/brakes/hydsupp","0"); #0 is off, 1 is grn, 2 is altn yellow accum
|
|
setprop("/controls/BSCU/brakes/mlgltemp","0"); #in celsius
|
|
setprop("/controls/BSCU/brakes/mlgrtemp","0"); #in celsius
|
|
setprop("/controls/BSCU/brakes/coolfans",0); #0 off 1 on
|
|
setprop("/controls/BSCU/brakes/loverheatplug",0); #0 off 1 on
|
|
setprop("/controls/BSCU/brakes/roverheatplug",0); #0 off 1 on
|
|
setprop("/controls/BSCU/brakes/mode","4"); #0 is norm, 1 is altn, 3 is altn no askid 4 is parkbrake
|
|
}
|
|
|
|
# for now like this. later try to do a jsbsim table
|
|
var BSCU_timer = maketimer(0.1, func(){
|
|
var ias = getprop("/velocities/airspeed-kt");
|
|
if (ias > 130) {
|
|
setprop("/controls/BSCU/nws/ruddlim","0");
|
|
} else if (ias > 70) {
|
|
setprop("/controls/BSCU/nws/tilllim","0");
|
|
} else if (ias > 57.9 and ias < 61.99 ) {
|
|
setprop("/controls/BSCU/nws/ruddlim","3.5");
|
|
});
|
|
# BSCU logic is A/SKID and NWS sw on, one eng running, a/c on grnd, and towing ctrl lvr in norm pos
|
|
|
|
# Initialize Landing Gear Control and Indication Unit
|
|
setlistener("/sim/signals/fdm-initialized", func {
|
|
lgciu_one_init();
|
|
lgciu_two_init();
|
|
BSCU_init();
|
|
BSCU_timer.start();
|
|
print("LGCIU System ... OK!");
|
|
print("BSCU System ... OK!");
|
|
});
|
|
|
|
|
|
|
|
|
|
### Left MLG compressor sensor to check if we are on the ground ###
|
|
setlistener("/gear/gear[0]/wow", func {
|
|
var wowmlgl = getprop("/gear/gear[0]/wow");
|
|
if (wowmlgl == 0) {
|
|
setprop("/controls/lgciu[0]/wow/isongroundl",0);
|
|
setprop("/controls/lgciu[1]/wow/isongroundl",0);
|
|
} else if (wowmlgl == 1) {
|
|
setprop("/controls/lgciu[0]/wow/isongroundl",1);
|
|
setprop("/controls/lgciu[1]/wow/isongroundl",1);
|
|
}
|
|
});
|
|
|
|
### Nose MLG compressor sensor to check if we are on the ground ###
|
|
setlistener("/gear/gear[1]/wow", func {
|
|
var wowmlgn = getprop("/gear/gear[1]/wow");
|
|
if (wowmlgn == 0) {
|
|
setprop("/controls/lgciu[0]/wow/isongroundn",0);
|
|
setprop("/controls/lgciu[1]/wow/isongroundn",0);
|
|
} else if (wowmlgn == 1) {
|
|
setprop("/controls/lgciu[0]/wow/isongroundn",1);
|
|
setprop("/controls/lgciu[1]/wow/isongroundn",1);
|
|
}
|
|
});
|
|
|
|
### Right MLG compressor sensor to check if we are on the ground ###
|
|
setlistener("/gear/gear[2]/wow", func {
|
|
var wowmlgr = getprop("/gear/gear[2]/wow");
|
|
if (wowmlgr == 0) {
|
|
setprop("/controls/lgciu[0]/wow/isongroundr",0);
|
|
setprop("/controls/lgciu[1]/wow/isongroundr",0);
|
|
} else if (wowmlgr == 1) {
|
|
setprop("/controls/lgciu[0]/wow/isongroundr",1);
|
|
setprop("/controls/lgciu[1]/wow/isongroundr",1);
|
|
}
|
|
});
|
|
|
|
### Interpolate MLG and NLG so that they take 10 seconds to move positions ###
|
|
setlistener("/controls/gear/gear-down", func {
|
|
var gr = getprop("/controls/gear/gear-down");
|
|
var mlgl = getprop("/controls/lgciu[0]/mlgleftpos");
|
|
var mlgr = getprop("/controls/lgciu[0]/mlgrightpos");
|
|
var mlgl2 = getprop("/controls/lgciu[1]/mlgleftpos");
|
|
var mlgr2 = getprop("/controls/lgciu[1]/mlgrightpos");
|
|
var nlg = getprop("/controls/lgciu[0]/nlgpos");
|
|
var nlg2 = getprop("/controls/lgciu[1]/nlgpos");
|
|
var inuseno1 = getprop("/controls/lgciu[0]/inuse");
|
|
var inuseno2 = getprop("/controls/lgciu[1]/inuse");
|
|
if ((gr == 1) and (inuseno1 == 1)) {
|
|
interpolate("/controls/lgciu[0]/mlgleftpos", 1, 10);
|
|
interpolate("/controls/lgciu[0]/mlgrightpos", 1, 10);
|
|
interpolate("/controls/lgciu[0]/nlgpos", 1, 10);
|
|
interpolate("/controls/lgciu[1]/mlgleftpos", 1, 10); #we also interpolate the other LGCIU's properties just to keep the systems from clashing
|
|
interpolate("/controls/lgciu[1]/mlgrightpos", 1, 10);
|
|
interpolate("/controls/lgciu[1]/nlgpos", 1, 10);
|
|
} else if ((gr == 1) and (inuseno2 == 1)) {
|
|
interpolate("/controls/lgciu[1]/mlgleftpos", 1, 10);
|
|
interpolate("/controls/lgciu[1]/mlgrightpos", 1, 10);
|
|
interpolate("/controls/lgciu[1]/nlgpos", 1, 10);
|
|
interpolate("/controls/lgciu[0]/mlgleftpos", 1, 10);
|
|
interpolate("/controls/lgciu[0]/mlgrightpos", 1, 10);
|
|
interpolate("/controls/lgciu[0]/nlgpos", 1, 10);
|
|
} else if ((gr == 0) and (inuseno1 == 1)) {
|
|
interpolate("/controls/lgciu[0]/mlgleftpos", 0, 10);
|
|
interpolate("/controls/lgciu[0]/mlgrightpos", 0, 10);
|
|
interpolate("/controls/lgciu[0]/nlgpos", 0, 10);
|
|
interpolate("/controls/lgciu[1]/mlgleftpos", 0, 10);
|
|
interpolate("/controls/lgciu[1]/mlgrightpos", 0, 10);
|
|
interpolate("/controls/lgciu[1]/nlgpos", 0, 10);
|
|
} else if ((gr == 0) and (inuseno2 == 1)) {
|
|
interpolate("/controls/lgciu[1]/mlgleftpos", 0, 10);
|
|
interpolate("/controls/lgciu[1]/mlgrightpos", 0, 10);
|
|
interpolate("/controls/lgciu[1]/nlgpos", 0, 10);
|
|
interpolate("/controls/lgciu[0]/mlgleftpos", 0, 10);
|
|
interpolate("/controls/lgciu[0]/mlgrightpos", 0, 10);
|
|
interpolate("/controls/lgciu[0]/nlgpos", 0, 10);
|
|
}
|
|
});
|
|
|
|
|
|
|
|
|
|
|
|
### Checking the Hydraulics and Valves ###
|
|
|
|
setlistener("/controls/gear/gear-down", func {
|
|
#var psigrn = getprop("/hydraulics/green/psi"); it0uchpods, please enable whenever hydraulic system is available
|
|
var spd = getprop("/velocities/airspeed-kt");
|
|
#if ((psigrn < 2000) or (spd > 261)) { see above line where psigrn is defined
|
|
if (spd > 261) {
|
|
setprop("/controls/gear/gear-down",0);
|
|
screen.log.write("Hydraulic Safety Valve was disconnected at 260 kts; cannot move gear!", 1, 1, 1);
|
|
}
|
|
});
|
|
|
|
### Switching between LGCIUS ###
|
|
|
|
# Putting the Gear Up
|
|
setlistener("/controls/gear/gear-down", func {
|
|
var inuse1 = getprop("/controls/lgciu[0]/inuse");
|
|
var inuse2 = getprop("/controls/lgciu[1]/inuse");
|
|
var isgearupordown = getprop("/controls/gear/gear-down");
|
|
#var hydsupp = getprop("/controls/lgciu[0]/hyd/greensupply");
|
|
#if ((inuse1 == 1) and (isgearupordown == 0) and (hydsupp == 1)) {
|
|
if ((inuse1 == 1) and (isgearupordown == 0)) {
|
|
setprop("/controls/lgciu[0]/hasbeenret",1); #we have put gear up on lgciu no 1
|
|
setprop("/controls/lgciu[0]/inuse",1); #we want to keep active LGCIU on no 1
|
|
setprop("/controls/lgciu[0]/gearlever",0); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[1]/gearlever",0); #0 = retracted, 1 = extended
|
|
} else {
|
|
#if ((inuse2 == 1) and (isgearupordown == 0) and (hydsupp == 1)) {
|
|
if ((inuse2 == 1) and (isgearupordown == 0)) {
|
|
setprop("/controls/lgciu[1]/hasbeenret",1); #we have put gear up on lgciu no 2
|
|
setprop("/controls/lgciu[1]/inuse",1); #we want to keep active LGCIU on no 2
|
|
setprop("/controls/lgciu[0]/gearlever",0); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[1]/gearlever",0); #0 = retracted, 1 = extended
|
|
} else {
|
|
}
|
|
}
|
|
});
|
|
|
|
# Putting the Gear Down Again
|
|
setlistener("/controls/gear/gear-down", func {
|
|
var inuse1 = getprop("/controls/lgciu[0]/inuse");
|
|
var inuse2 = getprop("/controls/lgciu[1]/inuse");
|
|
var hasbeen1 = getprop("/controls/lgciu[0]/hasbeenret");
|
|
var hasbeen2 = getprop("/controls/lgciu[1]/hasbeenret");
|
|
var isgearupordown = getprop("/controls/gear/gear-down");
|
|
var hydsupp = getprop("/controls/lgciu[0]/hyd/greensupply");
|
|
var no1fail = getprop("/controls/lgciu[0]/fail");
|
|
var no2fail = getprop("/controls/lgciu[1]/fail");
|
|
if ((inuse1 == 1) and (isgearupordown == 1) and (hasbeen1 == 1) and (hydsupp == 1)) {
|
|
setprop("/controls/lgciu[0]/hasbeenret",0); #reset retraction sensor
|
|
setprop("/controls/lgciu[0]/inuse",0); #we want to switch to no 2 after putting the gear down
|
|
setprop("/controls/lgciu[1]/inuse",1);
|
|
setprop("/controls/lgciu[0]/gearlever",1); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[1]/gearlever",1); #0 = retracted, 1 = extended
|
|
} else if ((inuse2 == 1) and (isgearupordown == 1) and (hasbeen2 == 1) and (hydsupp == 1)) {
|
|
setprop("/controls/lgciu[1]/hasbeenret",0); #reset retraction sensor
|
|
setprop("/controls/lgciu[0]/inuse",1); #we want to switch to no 1 after putting the gear down
|
|
setprop("/controls/lgciu[1]/inuse",0);
|
|
setprop("/controls/lgciu[0]/gearlever",1); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[1]/gearlever",1); #0 = retracted, 1 = extended
|
|
} else if ((inuse1 == 1) and (isgearupordown == 1) and (hasbeen1 == 1) and (hydsupp ==1) and (no2fail == 1)) {
|
|
setprop("/controls/lgciu[0]/hasbeenret",0); #reset retraction sensor
|
|
setprop("/controls/lgciu[0]/inuse",1); #we want to switch to no 2 after putting the gear down but we cant because it is failed
|
|
setprop("/controls/lgciu[1]/inuse",0);
|
|
setprop("/controls/lgciu[0]/gearlever",1); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[1]/gearlever",1); #0 = retracted, 1 = extended
|
|
} else if ((inuse1 == 2) and (isgearupordown == 1) and (hasbeen2 == 1) and (hydsupp ==1) and (no1fail == 1)) {
|
|
setprop("/controls/lgciu[0]/hasbeenret",0); #reset retraction sensor
|
|
setprop("/controls/lgciu[1]/inuse",1); #we want to switch to no 1 after putting the gear down but we cant because it is failed
|
|
setprop("/controls/lgciu[0]/inuse",0);
|
|
setprop("/controls/lgciu[0]/gearlever",1); #0 = retracted, 1 = extended
|
|
setprop("/controls/lgciu[1]/gearlever",1); #0 = retracted, 1 = extended
|
|
}
|
|
}
|
|
);
|
|
# Disconnect hyd to gear when we use emergency extension
|
|
setlistener("/controls/lgciu[0]/emermanext", func {
|
|
var no1manexthyd = getprop("/controls/lgciu[0]/emermanext");
|
|
if (no1manexthyd > 0.1) {
|
|
setprop("/controls/lgciu[0]/hyd/greensupply",0);
|
|
setprop("/controls/lgciu[1]/hyd/greensupply",0);
|
|
} else {
|
|
}
|
|
});
|
|
# Disconnect hyd to gear when we use emergency extension
|
|
setlistener("/controls/lgciu[0]/emermanext", func {
|
|
var no2manexthyd = getprop("/controls/lgciu[1]/emermanext");
|
|
if (no2manexthyd > 0.1) {
|
|
setprop("/controls/lgciu[0]/hyd/greensupply",0);
|
|
setprop("/controls/lgciu[1]/hyd/greensupply",0);
|
|
} else {
|
|
}
|
|
});
|
|
|
|
# No 1 failed
|
|
setlistener("/controls/lgciu[0]/fail", func {
|
|
var no1fail = getprop("/controls/lgciu[0]/fail");
|
|
if (no1fail == 1) {
|
|
setprop("/controls/lgciu[0]/inuse",0);
|
|
setprop("/controls/lgciu[1]/inuse",1);
|
|
print("LGCIU No 1... Failed!");
|
|
} else {
|
|
print("LGCIU No 1... Serviceable!");
|
|
}
|
|
});
|
|
|
|
# No 2 failed
|
|
setlistener("/controls/lgciu[1]/fail", func {
|
|
var no2fail = getprop("/controls/lgciu[1]/fail");
|
|
if (no2fail == 1) {
|
|
setprop("/controls/lgciu[1]/inuse",0);
|
|
setprop("/controls/lgciu[0]/inuse",1);
|
|
print("LGCIU No 2... Failed!");
|
|
} else {
|
|
print("LGCIU No 2... Serviceable!");
|
|
}
|
|
});
|
|
|
|
# BSCU failed
|
|
setlistener("/controls/BSCU/fail/BSCU", func {
|
|
var bscufail = getprop("/controls/BSCU/fail/BSCU");
|
|
if (bscufail == 1) {
|
|
print("BSCU... Failed!");
|
|
} else {
|
|
print("BSCU... Serviceable!");
|
|
}
|
|
});
|
|
|