add brake steering control unit
This commit is contained in:
Jonathan Redpath
parent
5b22ac9eb0
commit
3cedb987bc
1 changed files with 84 additions and 6 deletions
|
|
@ -25,7 +25,13 @@ var lgciu_one_init = func {
|
|||
setprop("/controls/lgciu[0]/inuse",1); #the LGCIUs switch between eachother on each gear cycle. eg if one LGCIU fails put the gear down and bring them up again to reset
|
||||
setprop("/controls/lgciu[0]/hasbeenret",0); #has the gear been retracted with LGCIU1?
|
||||
setprop("/controls/lgciu[0]/fail",0); #0 = no 1 =
|
||||
setprop("/controls/lgciu[0]/emermanext",0); #0 = no 1 = extended can only be retracted if green hyd is available
|
||||
setprop("/controls/lgciu[0]/emermanext","0"); #0 = no 3 = extended can only be retracted if green hyd is available. crank must be turned 3 times clockwise so this has quotes
|
||||
setprop("/controls/lgciu[0]/cargo/fwd/lock",1);
|
||||
setprop("/controls/lgciu[0]/cargo/aft/lock",1);
|
||||
setprop("/controls/lgciu[0]/cargo/bulk/lock",1);
|
||||
setprop("/controls/lgciu[0]/cargo/fwd/open",0);
|
||||
setprop("/controls/lgciu[0]/cargo/aft/open",0);
|
||||
setprop("/controls/lgciu[0]/cargo/bulk/open",0);
|
||||
}
|
||||
|
||||
var lgciu_two_init = func {
|
||||
|
|
@ -50,19 +56,60 @@ var lgciu_two_init = func {
|
|||
setprop("/controls/lgciu[1]/inuse",0); #the LGCIUs switch between eachother on each gear cycle. eg if one LGCIU fails put the gear down and bring them up again to reset
|
||||
setprop("/controls/lgciu[1]/hasbeenret",0); #has the gear been retracted with LGCIU2?
|
||||
setprop("/controls/lgciu[1]/fail",0); #0 = no 1 = yes
|
||||
setprop("/controls/lgciu[1]/emermanext",0); #0 = no 1 = extended can only be retracted if green hyd is available
|
||||
setprop("/controls/lgciu[1]/emermanext","0"); #0 = no 3 = extended can only be retracted if green hyd is available. crank must be turned 3 times clockwise so this has quotes
|
||||
setprop("/controls/lgciu[0]/init",1); #these two properties say that 'everything is ready now'
|
||||
setprop("/controls/lgciu[1]/init",1);
|
||||
setprop("/controls/lgciu[1]/cargo/fwd/lock",1);
|
||||
setprop("/controls/lgciu[1]/cargo/aft/lock",1);
|
||||
setprop("/controls/lgciu[1]/cargo/bulk/lock",1);
|
||||
setprop("/controls/lgciu[1]/cargo/fwd/open",0);
|
||||
setprop("/controls/lgciu[1]/cargo/aft/open",0);
|
||||
setprop("/controls/lgciu[1]/cargo/bulk/open",0);
|
||||
}
|
||||
|
||||
var BSCU_init = func {
|
||||
setprop("/controls/BSCU/hyd/greensupply",0);
|
||||
setprop("/controls/BSCU/nws/ruddlim","6");
|
||||
setprop("/controls/BSCU/nws/tilllim","70");
|
||||
setprop("/controls/BSCU/nws/enabled",0);
|
||||
setprop("/controls/BSCU/nws/pedalsdisc",0);
|
||||
setprop("/controls/BSCU/fail/nws",0);
|
||||
setprop("/controls/BSCU/fail/askid",0);
|
||||
setprop("/controls/BSCU/fail/BSCU",0);
|
||||
setprop("/controls/BSCU/brakes/hydsupp","0"); #0 is off, 1 is grn, 2 is altn yellow accum
|
||||
setprop("/controls/BSCU/brakes/mlgltemp","0"); #in celsius
|
||||
setprop("/controls/BSCU/brakes/mlgrtemp","0"); #in celsius
|
||||
setprop("/controls/BSCU/brakes/coolfans",0); #0 off 1 on
|
||||
setprop("/controls/BSCU/brakes/loverheatplug",0); #0 off 1 on
|
||||
setprop("/controls/BSCU/brakes/roverheatplug",0); #0 off 1 on
|
||||
setprop("/controls/BSCU/brakes/mode","4"); #0 is norm, 1 is altn, 3 is altn no askid 4 is parkbrake
|
||||
}
|
||||
|
||||
# for now like this. later try to do a jsbsim table
|
||||
var BSCU_timer = maketimer(0.1, func(){
|
||||
var ias = getprop("/velocities/airspeed-kt");
|
||||
if (ias > 130) {
|
||||
setprop("/controls/BSCU/nws/ruddlim","0");
|
||||
} else if (ias > 70) {
|
||||
setprop("/controls/BSCU/nws/tilllim","0");
|
||||
} else if (ias > 57.9 and ias < 61.99 ) {
|
||||
setprop("/controls/BSCU/nws/ruddlim","3.5");
|
||||
});
|
||||
# BSCU logic is A/SKID and NWS sw on, one eng running, a/c on grnd, and towing ctrl lvr in norm pos
|
||||
|
||||
# Initialize Landing Gear Control and Indication Unit
|
||||
setlistener("/sim/signals/fdm-initialized", func {
|
||||
lgciu_one_init();
|
||||
lgciu_two_init();
|
||||
BSCU_init();
|
||||
BSCU_timer.start();
|
||||
print("LGCIU System ... OK!");
|
||||
print("BSCU System ... OK!");
|
||||
});
|
||||
|
||||
|
||||
|
||||
|
||||
### Left MLG compressor sensor to check if we are on the ground ###
|
||||
setlistener("/gear/gear[0]/wow", func {
|
||||
var wowmlgl = getprop("/gear/gear[0]/wow");
|
||||
|
|
@ -164,14 +211,16 @@ setlistener("/controls/gear/gear-down", func {
|
|||
var inuse1 = getprop("/controls/lgciu[0]/inuse");
|
||||
var inuse2 = getprop("/controls/lgciu[1]/inuse");
|
||||
var isgearupordown = getprop("/controls/gear/gear-down");
|
||||
var hydsupp = getprop("/controls/lgciu[0]/hyd/greensupply");
|
||||
if ((inuse1 == 1) and (isgearupordown == 0) and (hydsupp == 1)) {
|
||||
#var hydsupp = getprop("/controls/lgciu[0]/hyd/greensupply");
|
||||
#if ((inuse1 == 1) and (isgearupordown == 0) and (hydsupp == 1)) {
|
||||
if ((inuse1 == 1) and (isgearupordown == 0)) {
|
||||
setprop("/controls/lgciu[0]/hasbeenret",1); #we have put gear up on lgciu no 1
|
||||
setprop("/controls/lgciu[0]/inuse",1); #we want to keep active LGCIU on no 1
|
||||
setprop("/controls/lgciu[0]/gearlever",0); #0 = retracted, 1 = extended
|
||||
setprop("/controls/lgciu[1]/gearlever",0); #0 = retracted, 1 = extended
|
||||
} else {
|
||||
if ((inuse2 == 1) and (isgearupordown == 0) and (hydsupp == 1)) {
|
||||
#if ((inuse2 == 1) and (isgearupordown == 0) and (hydsupp == 1)) {
|
||||
if ((inuse2 == 1) and (isgearupordown == 0)) {
|
||||
setprop("/controls/lgciu[1]/hasbeenret",1); #we have put gear up on lgciu no 2
|
||||
setprop("/controls/lgciu[1]/inuse",1); #we want to keep active LGCIU on no 2
|
||||
setprop("/controls/lgciu[0]/gearlever",0); #0 = retracted, 1 = extended
|
||||
|
|
@ -218,6 +267,24 @@ setprop("/controls/lgciu[1]/gearlever",1); #0 = retracted, 1 = extended
|
|||
}
|
||||
}
|
||||
);
|
||||
# Disconnect hyd to gear when we use emergency extension
|
||||
setlistener("/controls/lgciu[0]/emermanext", func {
|
||||
var no1manexthyd = getprop("/controls/lgciu[0]/emermanext");
|
||||
if (no1manexthyd > 0.1) {
|
||||
setprop("/controls/lgciu[0]/hyd/greensupply",0);
|
||||
setprop("/controls/lgciu[1]/hyd/greensupply",0);
|
||||
} else {
|
||||
}
|
||||
});
|
||||
# Disconnect hyd to gear when we use emergency extension
|
||||
setlistener("/controls/lgciu[0]/emermanext", func {
|
||||
var no2manexthyd = getprop("/controls/lgciu[1]/emermanext");
|
||||
if (no2manexthyd > 0.1) {
|
||||
setprop("/controls/lgciu[0]/hyd/greensupply",0);
|
||||
setprop("/controls/lgciu[1]/hyd/greensupply",0);
|
||||
} else {
|
||||
}
|
||||
});
|
||||
|
||||
# No 1 failed
|
||||
setlistener("/controls/lgciu[0]/fail", func {
|
||||
|
|
@ -242,3 +309,14 @@ print("LGCIU No 2... Failed!");
|
|||
print("LGCIU No 2... Serviceable!");
|
||||
}
|
||||
});
|
||||
|
||||
# BSCU failed
|
||||
setlistener("/controls/BSCU/fail/BSCU", func {
|
||||
var bscufail = getprop("/controls/BSCU/fail/BSCU");
|
||||
if (bscufail == 1) {
|
||||
print("BSCU... Failed!");
|
||||
} else {
|
||||
print("BSCU... Serviceable!");
|
||||
}
|
||||
});
|
||||
|
||||
|
|
|
|||
Reference in a new issue