legoboyvdlp R
9bb2ec1522
Fix that DC ESS SHED is powered when it shouldn't
2020-10-19 21:45:08 +01:00
legoboyvdlp R
9f394f118e
Add new logic for inverter. Now, the inverter power is proper. Also, the DC ESS is powered directly from bat 2 if inverter power is on. And the 80ms timer is simulated before the inverter comes online.
2020-10-19 21:40:50 +01:00
legoboyvdlp R
bf6b7fbb9f
Fix potential problem causer
2020-10-19 20:46:13 +01:00
ff04ea3853
Woops... no need for that debug print
...
Signed-off-by: fly <merspieler@airmail.cc>
2020-10-20 03:49:19 +11:00
643018829d
Fix issue
...
Signed-off-by: fly <merspieler@airmail.cc>
2020-10-20 03:46:55 +11:00
75a0ba7655
ND align overlay by MiSKLaCH, see #182 . Missing logic
...
Signed-off-by: fly <merspieler@airmail.cc>
2020-10-20 02:59:33 +11:00
8c490c0840
Merge gilly/FPV without svg
...
Signed-off-by: fly <merspieler@airmail.cc>
2020-10-20 02:56:30 +11:00
legoboyvdlp R
3b0bf7f2b1
Oops - didn't see merge conflict
2020-10-19 15:27:35 +01:00
legoboyvdlp R
7fcfff4ad3
Canvas QRH
2020-10-19 15:22:24 +01:00
legoboyvdlp R
98c2110b85
Merge branch 'dev' into 3D
2020-10-18 19:34:05 +01:00
legoboyvdlp R
83e80c0a73
Fix that yellow elec pump would come on with yellow elec pump failed
2020-10-18 17:42:36 +01:00
legoboyvdlp R
bcf4754174
Hydraulic dual failure warnings
2020-10-18 17:38:50 +01:00
legoboyvdlp R
f81c7ca72a
Add landing gear down warnings (failure to extend and also below 750 feet
2020-10-17 19:59:30 +01:00
legoboyvdlp R
57e6da80c2
Add modern ALL ENGINE FAILURE ECAM warning which replaces old DUAL FAILURE
2020-10-17 14:12:36 +01:00
legoboyvdlp R
6b7bbeeb7c
Takeoff CONFIG test button can now trigger config warnings, except parking brake
2020-10-17 13:40:48 +01:00
legoboyvdlp R
2f9d9914b2
Update warning for engine fire on ground to conform to new FWC standard
2020-10-17 13:14:08 +01:00
legoboyvdlp R
5cc675617b
Formatting; fix THR LVR ABV IDLE to consider TO POWER for case 2
2020-10-17 13:00:24 +01:00
legoboyvdlp R
ddc629d258
Revisit stall + park brk config warnings
2020-10-17 12:55:09 +01:00
legoboyvdlp R
c5aac7038d
Begin implementation of later FWC standard, including THR LVR ABV IDLE warning, for situation where one engine is in high power and the other is idle or reverse
2020-10-16 22:50:21 +01:00
legoboyvdlp R
c95912fa8b
ATSU: add server switching for METAR server; add ATIS subsystem. However it is not yet connected to MCDU. That comes next week.
2020-10-16 21:37:30 +01:00
semir
1a030c1afb
MODEL/TEXTURE:Added small detail to inner wing, UV reorganization for some parts. Color changes and details added
2020-10-16 14:35:33 +02:00
legoboyvdlp R
d3c69a97a3
Merge branch 'dev' into 3D
2020-10-15 17:59:27 +01:00
legoboyvdlp R
2e5736860c
Show DC BAT in XX when the battery switches are off, hence the BCL aren't powered
2020-10-15 17:58:49 +01:00
legoboyvdlp R
75a927a46b
Particles: correct IAE moisture z-positon
2020-10-15 17:01:49 +01:00
legoboyvdlp R
f46d787533
Merge branch 'dev' into 3D
2020-10-15 16:56:30 +01:00
semir
e2452d2408
TEXTURE:One livery still had black light-fixed
2020-10-14 22:03:04 +02:00
semir
42a9f3cc99
TEXTURE:Lights are no longer black. Dirt back on engines back(except unpainted)
2020-10-14 21:38:35 +02:00
legoboyvdlp R
293270f57e
ECAM warnings for the GEN 1 / 2 fault
2020-10-14 18:08:18 +01:00
legoboyvdlp R
68593890bf
Add auto-switching for the AC ESS after three seconds; also correct switch control power to ac1 / ac2
2020-10-14 15:32:58 +01:00
legoboyvdlp R
aed192c7ae
Same thing for APU
2020-10-14 15:13:24 +01:00
legoboyvdlp R
6a8f13aeb4
Emergency bugfix: fix that GCU fault would inhibit gens connecting on startup...
2020-10-14 13:51:30 +01:00
legoboyvdlp R
117f0256f8
Electrical: GCU should be powered by PMG or by DC BAT bus. Therefore, you can control with GEN pb sw if you have PMG volts _or_ if you have DC BAT. Also, disc power is on DC BAT, not DC ESS, even though indication is on ESS. Typically weird Airbus
2020-10-14 00:32:24 +01:00
legoboyvdlp R
59c092a5bd
IDG improvements:
...
1) restrict disconnection with underspeed condition (14%)
2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero.
3) Generator comes online at 52% N2 (4730 RPM)
4) Wider range of acceptable frequencies per AMM
5) Gen faults latch -- allows for potential restoration upon reset of the generator switch
6) CSD: restrict rpm range between 4500 -- 9120 rpm
2020-10-13 23:53:15 +01:00
legoboyvdlp R
473b85d106
Fix pushbutton sound volume; fix lower ecam typo. Prepare to add static inverter fault
2020-10-13 21:45:48 +01:00
legoboyvdlp R
8107bb73f5
New OH panel pushbutton sound
2020-10-13 20:50:22 +01:00
legoboyvdlp R
0ad154a7b2
Previews -- new previews by merspieler for new model
2020-10-13 19:58:19 +01:00
semir
ed7555da3d
TEXTURE:Minor fixes, removal of dirt on the unpainted livery
2020-10-13 11:57:54 +02:00
legoboyvdlp R
37dc0c4ae9
Add DCDU powerup sequence
2020-10-12 21:14:40 +01:00
legoboyvdlp R
ed49a64199
Last set of arrows
2020-10-12 19:29:31 +01:00
semir
400bd3da26
MODEL/TEXTURE:Better fitting to surface and UV map for elevator static dischargers. Added radome latches/locks, darker color for spoiler hinges,etc on all textures.
2020-10-12 20:17:05 +02:00
legoboyvdlp R
01af5caad3
Bottom arrow
2020-10-12 19:09:02 +01:00
legoboyvdlp R
69a7302f04
Merge branch 'dev' into 3D
2020-10-11 20:52:42 +01:00
legoboyvdlp R
040a49ae2d
Merge branch 'dev' into 3D
2020-10-11 20:17:31 +01:00
legoboyvdlp R
df3ac8ed33
Arrowssss
2020-10-11 20:13:06 +01:00
legoboyvdlp R
202fe2b3d0
Better schedules (thanks Octal!)
2020-10-11 19:28:13 +01:00
legoboyvdlp R
e1bf8e972f
Add non-linear pitch scale to PFD.
2020-10-11 17:45:28 +01:00
legoboyvdlp R
207c24c430
PFD: move the X X and = =
2020-10-11 16:56:03 +01:00
legoboyvdlp R
3a64392d51
New PFD non-linear pitch scale
2020-10-11 14:19:05 +01:00
Josh Davidson
433fe4ca0e
Control: Refactor cockpit elevator trim clickspots to properly control the trim, fixes #150
2020-10-10 20:23:41 -04:00
legoboyvdlp R
53e46ae8d2
Add IDG guards
2020-10-10 21:01:24 +01:00
