fly/A320-family
1
0
Fork 0
Code Activity
1468 commits 7 branches 0 tags 704 MiB
Commit graph

691 commits

Author SHA1 Message Date
legoboyvdlp R
2477187dc7 Lower ECAM: display of gross weight now comes from FMGC. So it is dashed in phase 1, and also in future will be inaccurate if you enter bad ZFW 2020-12-04 18:34:52 +00:00
vezza
879deba025 Hydraulic and brake system improvements 
- loss of braking if no hydraulic pressure;
- code restyling;
 2020-11-30 00:13:43 +01:00
legoboyvdlp R
c9d13ca14b CPDLC: add free text page 2020-11-29 16:58:38 +00:00
legoboyvdlp R
60969bba6e Bugfix upper ECAM 2020-11-29 14:39:03 +00:00
legoboyvdlp R
05e992132d Add G-force indication to the SD 2020-11-29 13:17:56 +00:00
legoboyvdlp R
bc445a1eaa Optimization of the systems loop. Remove most of the excess code in libraries.nas, replaced with jsb / updateManager 2020-11-28 13:40:33 +00:00
legoboyvdlp R
fe1cd02937 Optimization of the BLEED Lower ECAM page, fix menubar help item 2020-11-27 16:27:17 +00:00
vezza
8ff4d1d662 Hydraulic and brake system improvements 
- fix parking brake gauge indication;
- fix accumulator pressure;
- accumulators now provides 7 full brakings to get depressurized.
 2020-11-27 00:00:50 +01:00
legoboyvdlp R
b75fbce2a1 Optimization 2020-11-26 19:31:18 +00:00
legoboyvdlp R
d803796f6b ELEV fault messages + separate ALTN and direct law warning 2020-11-26 19:05:41 +00:00
legoboyvdlp R
2bb5ec6578 MAN PITCH TRIM is controlled now by elevator fault. 2020-11-26 17:53:04 +00:00
legoboyvdlp R
55e4dac6ac FBW: FCTL pitch axis rework. Add FBW dependency to ailerons (ELAC 1 / 2 / SEC 1 / SEC 2 required). Add THS JAM failure. Add hydraulic dependency to the stabalizer. 2020-11-26 17:20:34 +00:00
legoboyvdlp R
2dc42e388c Ailerons are controlled by ELACs. 2020-11-25 21:39:16 +00:00
legoboyvdlp R
20b4d4e767 Fix MMO not showing on PFD 2020-11-24 19:21:58 +00:00
legoboyvdlp R
c7ba88dc23 PFD: only show MAN PITCH TRIM msg when in flight. 2020-11-23 23:48:47 +00:00
legoboyvdlp R
c6d607e6b2 Landing gear warning light, add emission animation and electrical dependency 2020-11-23 20:18:28 +00:00
legoboyvdlp R
b94e19bd67 Fix serious bug on First officer PFD 2020-11-23 19:28:23 +00:00
legoboyvdlp R
8fd1c836e6 Negative altitude indication on PFD 2020-11-23 19:22:56 +00:00
legoboyvdlp R
56955bebc4 Per photo reference, the ground reference bar should use radio altimeter rather than barometric altimeter, consequently is independent of the altimeter setting. 2020-11-23 19:09:44 +00:00
Josh Davidson
46b439571e DU: Fix bug where PFD update the slow too much timesgit add .! 2020-11-23 13:00:01 -05:00
vezza
4b58edb995 Hydraulic and brake systems improvements: 
- fix flightdeck brakes pressure indicator's bug;
- disable autobrake if antiskid is disabled or green pressure is low/missing;
- set hydraulic brakes snd accumulator's pressure;

to be done: set brake power according to brake's pressure
 2020-11-23 02:29:46 +01:00
Matthew Maring
3d5a58d2ee Improve uninitialized FUELPRED page 2020-11-22 14:57:38 -05:00
legoboyvdlp R
3582325aa4 ADIRS: make it that PFD comes online after ~25 seconds of align per video reference. FBW: make it that failures can be reverted. So if failure condition ends, you go back to normal law. Please report any problems! 2020-11-22 17:28:35 +00:00
legoboyvdlp
cc30832e49
Merge changes to cabin alert (#194) 
* MiSKLaCH Mods

* Original announcements which have been replaced

* Fix sound

Co-authored-by: MiSKLaCH <misklach@gmail.com>
 2020-11-20 17:27:49 +00:00
legoboyvdlp R
1a9c14856f Enable Compositor shadow mapping 2020-11-17 19:39:59 +00:00
legoboyvdlp R
5264de9b7f Use framecount technique to improve performance 2020-11-16 22:55:11 +00:00
legoboyvdlp R
d8a962d969 Switch ECAM controller to Emesary 2020-11-16 21:59:53 +00:00
legoboyvdlp R
b171018c27 Emesary: add ECAM subsystem; fix potential bug-causer in IESI. 2020-11-16 21:34:01 +00:00
legoboyvdlp R
497364fbfd Bugfix APU that would fail to start due to not being synced with JSBSim perfectly 2020-11-08 17:52:56 +00:00
legoboyvdlp R
9b45e4d675 It was necessary to manually call predicates to update RTE layers 2020-11-07 19:07:55 +00:00
legoboyvdlp R
682adfd7b0 Hide layers when in failed mode 2020-11-07 14:52:39 +00:00
legoboyvdlp R
7d77279fe6 Bugfixes, enable ATT HDG switch 2020-11-07 14:35:31 +00:00
legoboyvdlp R
21f8f7ea9c Merge branch 'dev' into alignND 2020-11-07 13:59:49 +00:00
legoboyvdlp R
6baf63c35c Emesary IESI: fix bugs 2020-11-07 13:57:16 +00:00
legoboyvdlp R
d7c297a0b7 Emesary IESI 2020-11-07 01:22:06 +00:00
legoboyvdlp R
9a98276803 Now works 2020-11-05 20:58:25 +00:00
legoboyvdlp R
fcc6331556 Merge branch 'dev' into alignND 2020-11-02 23:51:40 +00:00
legoboyvdlp R
48d5a25260 Map not aligned, somewhat working 2020-11-02 20:37:43 +00:00
legoboyvdlp R
97dc7f73ce Bugfix reverser 1 display 2020-11-01 23:06:00 +00:00
legoboyvdlp R
ce8df0eb5e Remove extra part on A320 PFD 2020-11-01 21:03:48 +00:00
legoboyvdlp R
ef3bc019ae Improve FADEC power on the E/WD display, so that you don't get out of sync; also make sure that the TLA indicator disappears when it should 2020-10-30 21:30:35 +00:00
legoboyvdlp R
1d7ee06abb In N1 mode, hide the EPR TLA 2020-10-29 12:10:46 +00:00
legoboyvdlp R
ceb2abc258 IAE display finished 2020-10-29 01:10:35 +00:00
legoboyvdlp R
aaafb2d1b1 WIP IAE 2020-10-29 00:50:20 +00:00
legoboyvdlp R
68eb32ea27 Bugfix a couple of runtime errors 2020-10-28 22:54:56 +00:00
legoboyvdlp R
299ca83498 Make slat alpha lock more efficient - don't use properties; use variables and props.UpdateManager 2020-10-28 18:31:31 +00:00
legoboyvdlp R
d550bf84fb Fix power transients 2020-10-28 18:11:19 +00:00
legoboyvdlp R
5d561b851c Add test page again 2020-10-28 17:38:08 +00:00
legoboyvdlp R
def546d04f Updates and improvements to Emesary code. Fix bugs. Everything ported for CFM. All works. Add memoized update to ensure efficiency is maximum. 2020-10-28 16:03:20 +00:00
legoboyvdlp R
29459ee55f Fix typo, port ECAM 2020-10-28 01:13:26 +00:00
legoboyvdlp R
ca64787a27 Finish upper ECAM. Still bug with thrust limit. 2020-10-28 01:06:12 +00:00
legoboyvdlp R
d1b65655ba Most of the engine parameters ported. 2020-10-28 00:53:52 +00:00
legoboyvdlp R
6bb53d70d1 Add framework for new Emesary based display framework. This is based off work by Richard Harrison on the F-15, making use of the FrameNotification concept 2020-10-27 23:29:07 +00:00
legoboyvdlp R
6c5030d813 Bugfix the roll on IESI, and add pitch arrows 2020-10-26 20:31:30 +00:00
legoboyvdlp R
1e97243ce4 PFD: fix bug with the arrows being non-mathematically offset 2020-10-26 00:12:06 +00:00
legoboyvdlp R
2fb762a0c9 Merge branch 'dev' into pfd-rework 2020-10-25 23:47:18 +00:00
legoboyvdlp R
b1b2143c0b Better ASI scale, add roll markings on IESI 2020-10-25 18:14:29 +00:00
legoboyvdlp R
b273f23d40 Fix pitch scale on IESI. Various improvements 2020-10-25 17:10:34 +00:00
legoboyvdlp R
45bcfe1392 IESI brightness control 2020-10-25 15:43:40 +00:00
legoboyvdlp R
235c9c3ef7 Improvements to IESI: enable ATT RESET button which when held for 2 seconds will trigger a reinit for 10 seconds; add limitations to altitude scale; add negative text; add a more realistic mach simulation 2020-10-25 15:21:38 +00:00
legoboyvdlp R
b1d8771fe2 Fix engine panel texture (thanks @Newo) 2020-10-25 13:02:34 +00:00
legoboyvdlp R
868b6c9610 AOC CONFIG page. Bugfixes. ECAM memo for the AOC system, also you need to input flight number now to have a working AOC 2020-10-24 19:09:49 +01:00
legoboyvdlp R
a867cfc4c9 Save server selection. Improve parser to remove any lowercase char or comma (invalid) 2020-10-24 15:07:23 +01:00
legoboyvdlp R
d599e1ffc5 MCDU: add working ATIS fetcher 2020-10-24 14:07:15 +01:00
legoboyvdlp R
5c60cafb68 Add ability to display ATIS in MCDU 2020-10-23 20:38:12 +01:00
legoboyvdlp R
93cf903128 Show ATIS code + time 2020-10-23 18:18:55 +01:00
legoboyvdlp R
58a4136e4e Add ATIS fetching code. You can't see it in the MCDU yet; however the fetching page work 2020-10-23 14:49:01 +01:00
legoboyvdlp R
7990e8349a MCDU: change the way WEATHER REQUEST works slightly, based off video reference. Now, it will return to AOC page, and after some time say WX UPLINK. Also, promp on 6R on AOC page to go to last message. And make dummy ATIS page. 2020-10-22 21:21:04 +01:00
legoboyvdlp R
42a17b5149 Also on RHS ND 2020-10-22 16:47:38 +01:00
legoboyvdlp R
0f4f39e04a Secret 2020-10-22 16:25:45 +01:00
legoboyvdlp R
8069ebae11 Merge branch 'dev' into pfd-rework 2020-10-20 18:55:06 +01:00
fly
ff04ea3853 Woops... no need for that debug print 
Signed-off-by: fly <merspieler@airmail.cc>
 2020-10-20 03:49:19 +11:00
fly
643018829d Fix issue 
Signed-off-by: fly <merspieler@airmail.cc>
 2020-10-20 03:46:55 +11:00
fly
75a0ba7655 ND align overlay by MiSKLaCH, see #182. Missing logic 
Signed-off-by: fly <merspieler@airmail.cc>
 2020-10-20 02:59:33 +11:00
fly
8c490c0840 Merge gilly/FPV without svg 
Signed-off-by: fly <merspieler@airmail.cc>
 2020-10-20 02:56:30 +11:00
legoboyvdlp R
7fcfff4ad3 Canvas QRH 2020-10-19 15:22:24 +01:00
legoboyvdlp R
c95912fa8b ATSU: add server switching for METAR server; add ATIS subsystem. However it is not yet connected to MCDU. That comes next week. 2020-10-16 21:37:30 +01:00
legoboyvdlp R
2e5736860c Show DC BAT in XX when the battery switches are off, hence the BCL aren't powered 2020-10-15 17:58:49 +01:00
legoboyvdlp R
68593890bf Add auto-switching for the AC ESS after three seconds; also correct switch control power to ac1 / ac2 2020-10-14 15:32:58 +01:00
legoboyvdlp R
aed192c7ae Same thing for APU 2020-10-14 15:13:24 +01:00
legoboyvdlp R
117f0256f8 Electrical: GCU should be powered by PMG or by DC BAT bus. Therefore, you can control with GEN pb sw if you have PMG volts _or_ if you have DC BAT. Also, disc power is on DC BAT, not DC ESS, even though indication is on ESS. Typically weird Airbus 2020-10-14 00:32:24 +01:00
legoboyvdlp R
59c092a5bd IDG improvements: 
1) restrict disconnection with underspeed condition (14%)
2) Fire pushbutton should deactivate, not disconnect IDG. Therefore, it opens the GCR rather than setting input rpm to zero.
3) Generator comes online at 52% N2 (4730 RPM)
4) Wider range of acceptable frequencies per AMM
5) Gen faults latch -- allows for potential restoration upon reset of the generator switch
6) CSD: restrict rpm range between 4500 -- 9120 rpm
 2020-10-13 23:53:15 +01:00
legoboyvdlp R
8107bb73f5 New OH panel pushbutton sound 2020-10-13 20:50:22 +01:00
legoboyvdlp R
ed49a64199 Last set of arrows 2020-10-12 19:29:31 +01:00
legoboyvdlp R
01af5caad3 Bottom arrow 2020-10-12 19:09:02 +01:00
legoboyvdlp R
df3ac8ed33 Arrowssss 2020-10-11 20:13:06 +01:00
legoboyvdlp R
e1bf8e972f Add non-linear pitch scale to PFD. 2020-10-11 17:45:28 +01:00
legoboyvdlp R
207c24c430 PFD: move the X X and = = 2020-10-11 16:56:03 +01:00
legoboyvdlp R
3a64392d51 New PFD non-linear pitch scale 2020-10-11 14:19:05 +01:00
Josh Davidson
433fe4ca0e Control: Refactor cockpit elevator trim clickspots to properly control the trim, fixes #150 2020-10-10 20:23:41 -04:00
legoboyvdlp R
53e46ae8d2 Add IDG guards 2020-10-10 21:01:24 +01:00
legoboyvdlp R
46f810b48b Bugfix -- hide rather than show the stall warning alpha bars 2020-10-10 20:33:51 +01:00
legoboyvdlp R
78e4597ff2 Ground reference bar on PFD should obscure the altitude window. Even if its annoying. 2020-10-10 20:28:20 +01:00
legoboyvdlp R
b02cc4e61f Hide all FAC warnings on PFD when FAC1+2 failed, replace with SPD LIM red alert 2020-10-10 20:20:24 +01:00
legoboyvdlp R
0829f51377 SPD LIM displayed on captain's PFD if there is a dual FAC failure 2020-10-10 19:50:10 +01:00
legoboyvdlp R
66eb7daf31 Fuel flow should not be zero! 2020-10-10 17:43:03 +01:00
legoboyvdlp R
3528bd1262 Better clipping on full flap 2020-10-10 14:15:36 +01:00
legoboyvdlp R
59b157ce98 Slats animated 2020-10-10 14:03:42 +01:00
legoboyvdlp R
14606bb9e4 But I animated the flaps 2020-10-09 21:10:07 +01:00
legoboyvdlp R
00a6e9fd46 I dislike inkscape clipping. Just saying. 2020-10-09 20:50:46 +01:00