1
0
Fork 0
Commit graph

973 commits

Author SHA1 Message Date
curt
c7f6156324 "make dist" fixes. 2008-08-28 21:20:21 +00:00
ehofman
8858ad7a00 Sync. with JSBSim cvs 2008-08-26 08:02:31 +00:00
ehofman
90f498be4d Sync. with JSBSim CVS 2008-08-14 14:16:50 +00:00
ehofman
66eef4dafc Add support for squared damping coefficients for gears. 2008-08-03 13:52:45 +00:00
ehofman
429f2530de James Turner:
* experimental clean-up / reduction on two of the FG headers:
   (I'm going to await feedback on the developers list before doing more of
    these, to avoiding going over files multiple times, but in principle it
    seems pretty straightforward.)

 * final fixes for SG_USING_STD removal
2008-07-29 08:27:48 +00:00
ehofman
667e64e1eb - remove the SG_GLxxxx_H #defines, since OSG provides its own versions
- this exposed a bizarre issue on Mac where dragging in <AGL/agl.h> in
   extensions.hxx was pulling in all of Carbon to the global namespace
   - very scary. As a result, I now need to explicitly include CoreFoundation
   in fg_init.cxx.
 - change SG_USING_STD(x) to using std::x
2008-07-27 16:25:13 +00:00
fredb
0dfdbf8499 One occurence of Balloon.cxx is enough 2008-07-26 08:25:11 +00:00
durk
6048f4d01e Rvert last change. The Balloon and Magic Carpet are there. They didn't
show up during my previous commit though...
2008-07-26 07:20:48 +00:00
ehofman
a40e040e24 Add the BalloonSim and MagicCarpet fdm's back in (i seriously thought this had been done, oops) 2008-07-26 07:19:13 +00:00
durk
f6301ea1d7 Balloon and Magic Carpet no longer exist. 2008-07-26 07:01:07 +00:00
ehofman
d9bfd5a425 This should apply, and everything should build cleanly, in isolation from the
SimGear change. It changes all the SG_xxxx to be the 'real' includes, and gets
rid of many #ifdef SG_HAVE_STD_INCLUDES. As an added bonus, rather than
replacing 'SG_USING_NAMESPACE(std)' with 'using namespace std', I just fixed
the small number of places to use std:: explicitly. So we're no longer polluting
the global namespace with the entire contents of std, in many cases.

There is one more 'mechanical' change to come - getting rid of SG_USING_STD(X),
but I want to keep that separate from everything else. (There's another
mechnical change, replacing <math.h> with <cmath> and so on *everywhere*, but
one step at a time)
2008-07-25 18:38:29 +00:00
ehofman
eccddb3dfd Attached patches remove BORLANDC, and hence SG_MATH_EXCEPTION_CLASH and SG_INCOM
PLETE_FUNCTIONAL from SimGear and FlightGear.

As a result, SG_HAVE_STD_INCLUDES is now *always* set, so I will get the boring
fixes for that done, but separately. I'm still auditing the other things in comp
ilers.h - there's a lot that can die now BORLAND is gone.
2008-07-25 10:39:53 +00:00
ehofman
4b40e725cd remove macintosh (note: not MacOS-X) and MWERKS workarounds. 2008-07-24 19:50:58 +00:00
ehofman
3b3f671974 Sync. with JSBSim CVS (header cleanups). 2008-07-22 08:49:15 +00:00
mfranz
030035a32a include cstring for memset() (necessary for gcc 4.3.*; backported
from JSBSim/cvs)
2008-07-15 13:08:03 +00:00
ehofman
ce7f695ea2 add a reference for memset() 2008-07-11 14:11:54 +00:00
ehofman
f7f17a4744 Update to the latest version of JSBSim which supports Lighter Than Air craft
(like Airships) and external forces.
2008-07-10 17:23:02 +00:00
timoore
bfc1967529 Revert most iostream-related changes to JSBSim
So many files in JSBSim use cout that it is not productive to remove
iostream from header files.
2008-06-06 21:21:57 +00:00
timoore
32e9505eed Clean up header file use of iostream and "using" declarations
Replace include <iostream> with istream, ostream and/or iosfwd as
appropriate.

Remove using namespace std and using std::foo from header files.
2008-06-02 21:09:51 +00:00
timoore
a251fd35cb Include <iostream> and using declarations as needed.
SimGear no longer includes iostream and avoids using declarations in
header files, so various fixups are needed.
2008-06-02 21:07:35 +00:00
timoore
ebf2e996e9 Fixes for compiling with gcc 4.3
Include standard header files and qualify with std:: where needed.

Qualify various char parameters and variables with const.
2008-04-13 21:12:36 +00:00
andy
e00b796b3c Maik: remove tow end force smoothing. 2008-02-01 19:56:51 +00:00
timoore
853e371d1e Fix for "falling through ground" problem
The LOD far range on the tile entry scenegraph node was initialized to
0. This meant that any traverals of active children that happened
before the tile manager updated the node would ignore the node
altogether. Among these is the groundcache traversal which was failing
at startup even though scenery was loaded.

Also added a function to dump scene graph nodes to files; very handy
in gdb.
2007-12-20 23:20:51 +00:00
timoore
579b60b8e4 Check if scenery is available before blowing away existing values in ground cache
This fixes a race condition when teleporting somewhere outside of the
currently loaded scenery. Before, if there was no valid scenery, an
aircraft might end up at the center of the earth...
2007-12-11 11:10:35 +00:00
andy
57918533eb Maik: add ROTORBALANCE axis. Fix spelling of ROTORRELTARGET. 2007-12-10 19:25:24 +00:00
mfranz
32dfdaea61 backport from JSBSim/cvs: apply prop sense only once (OK'ed by JSB) 2007-12-04 20:22:36 +00:00
timoore
2a03296e5e initialize _material pointer in FGGroundCache
_material was uninitialized. This was causing a segfault with
as-yet-to-be-checked-in paging code; I don't know if it ever resulted
in a segfault with the old tile loader, but it certainly could have.
2007-11-22 23:46:39 +00:00
frohlich
ba10199188 Move some values exclusively used by LaRCsim to LaRCsim 2007-11-09 05:39:13 +00:00
mfranz
405c013618 JSB: "Fixed uninitialized variables; patch by Anders Gidenstam"
mf: backporting from JSB/CVS to fix serious gear problem
2007-10-10 22:11:14 +00:00
andy
7f546e94d3 revert accidental checkin 2007-09-05 02:03:15 +00:00
andy
f52165731a Ron Jensen: extend atmosphere tables to match environment data 2007-09-05 02:01:57 +00:00
andy
bf02d9bdd0 Maik: Use exact calculation instead of 1st order approximation 2007-07-31 15:51:04 +00:00
mfranz
d1fb32b315 cleanup: extract globals->get_controls() 2007-07-29 17:36:30 +00:00
frohlich
17262df51c Modified Files:
src/FDM/flight.cxx src/FDM/flight.hxx
	src/FDM/LaRCsim/LaRCsim.cxx src/FDM/SP/ADA.cxx
	src/Scenery/scenery.cxx src/Scenery/scenery.hxx:
	Remove obviously unused variables from FGInterface, make use of
	SGMath functions. No longer use plib math functions in FGInterface.
2007-07-29 10:21:22 +00:00
mfranz
22de2508aa - set filter dt only once
- make throttle more responsive (again)
2007-07-28 08:08:22 +00:00
mfranz
26af6a3207 - add (damped) aileron/rudder trimming (may be needed for mibs)
- use an FPS-independent lowpass filter for all damped properties
- cleanup
2007-07-27 21:57:55 +00:00
andy
0368accc6d Maik: add a downwashfactor tunable 2007-07-23 16:10:21 +00:00
andy
fe5ac84f8c Maik: remove redundant (and innapropriate in the YASim core) property interface for the rotorgear. 2007-07-09 19:51:01 +00:00
mfranz
0b84cddee7 set north/east/down speed to make radar map mode work 2007-06-27 15:28:23 +00:00
mfranz
ee23145936 Maik JUSTUS: "ease the rotor of the hornet if not rotating" 2007-06-23 06:41:17 +00:00
mfranz
28da7c0a90 Maik JUSTUS: "small update to the tilt-rotor feature" 2007-06-16 07:22:47 +00:00
andy
d0550441bb Maik: Adding support for tilting of the rotor. Can be used for small
autogyros or even for the Osprey.
2007-06-13 21:10:23 +00:00
curt
b163af3010 Fix indentation. 2007-06-10 16:01:09 +00:00
curt
ba6f4cb42f Syd Adams:
Export ground speed to property system under /velocities.
2007-06-10 15:58:50 +00:00
andy
a90a24d9dd Maik: fix crash when using aircraft with hitches under the command
line solver.  (He promises to get all the MP interaction out of the
FDM in a future patch.)
2007-06-05 16:01:43 +00:00
mfranz
158dbdd96c Sync w. JSBSim CVS (merge from PRE_OSG_PLIB_20061029 branch) 2007-06-03 12:49:19 +00:00
mfranz
3cda82e0a9 Sync w. JSBSim CVS (merge from PRE_OSG_PLIB_20061029 branch) 2007-06-03 09:37:02 +00:00
mfranz
e8f2255039 Maik JUSTUS: fix typo (ROTORRELTARGET) 2007-05-31 16:58:58 +00:00
andy
1a5bbec83b Maik: add ROTORELTARGET and ROTORENGINEMAXRELTORQUE input axes 2007-05-27 20:19:15 +00:00
andy
7986caf75b Maik: place the contact points at the rotor blade tips (center+radius), not at center+diameter 2007-05-25 22:58:04 +00:00