RE: --aircraft=ufo in system.fgfsrc is ignored
To change a 'feature', one that has been mentioned here many
times, and again recently, place the following code block
into fgInitFGAircraft.
In its favour, I would argue this means FG can be run without
a command line, provided FG_ROOT has been set in the
environment, and that seems to me, as it should be ... ;=))
Perhaps the only counter, is that system.fgfsrc is read twice,
but so are others, like .fgfsrc, for other (local) options ...
or system.fgfsrc should .nt. be used for 'aircraft' ?
a single apt.dat.gz file which is in the native X-Plane format.
To do this I wrote a front end loader than builds the airport and runway
list. Some of the changes I needed to make had a cascading effect, so there
are minor naming changes scattered throughout the code.
I've finished the emigration of the radiostack, and I've also removed it
completely. It turned out that the comm radio is completely implemented in
the ATC subsystem. I've changed the affected ATC files to point
to /instrumentation/com, but I guess that the maintainer of the ATC code
should decide wether to make it configureable, and how.
I also had to change some files in Network and Main. The changes in network
should be obvious, but the changes in Main were a bit suspect. The files
included radiostack.hxx, but they weren't directly depending on
radiostack-hxx. They were depending on other files that were included by
radiostack.hxx. I got it to compile, but I'm not sure if I included the
correct directly depending file.
For the data directory I changed every occurrence of /radios/
with /instrumentation/ with this simple one-liner that I found on the net:
find -name '*.xml' -type f | xargs perl -pi -e
's/\/radios\//\/instrumentation\//g'
Instead of me sending all the files that got changed by this I suggest that
you execute the one-liner yourself. Of course I can not guarantee that this
will work perfectly, but I considered hand editing to be not an option (I'm
lazy). I don't want to test every aircraft to see if everything still works,
I think it's better to wait and see if anyone complaints about broken nav
radios/instruments.
Don't overwrite user settings from config files.
fgfs had in any case set bump-mapping to false, no matter if this
node did already exist (because it was defined in a config file).
A good elevation is critical for proper glide slope modeling. This patch
assigns the average field elevation to any ILS component that doesn't have
a valid elevation.
Also, for an ILS approach, use the GS transmitter elevation for glide slope
calculations rather than the localizer elevation, in some cases this can
make a big difference.
These change add some code that at initialization time will snap all
localizers into perfect alignment with their runways. It's my experience
that the DAFIF/FAA data reports runway and localizer headings to a level
of precision that is great for making charts, or adjusting your OBS, etc.
But the level of precision of this data can be far enough off to make you
visibly *un*aligned with the runway when the CDI needle is centered.
There are probably cases where the localizer isn't really perfectly
aligned with the runway, or intentionally misaligned to avoid obstacles
or terrain. So I have made this configurable for those that trust the
data more than I do. Just set "/sim/navdb/auto-align-localizers" to
true/false in the preferences file to turn this feature on or off in the
code.
- FG now directly supports Robin's native nav database file format.
- His latest data now separates out dme, gs, loc, and marker beacon
transmitters rather than lumping them all into a single "ILS" record.
- These new data structure changes prompted me to do some code restructuring
so that internally these different types of navaids are all kept as
separate lists and searched and handled separately.
- This structural change had a cascading affect on any code that
references or uses the nav databases. I've gone and "touched" a lot of
nav related code in a lot of places.
- As an added bonus, the new data (and code) adds DME bias so these will
all now read as they do in real life.
- Added Navaids/navdb.cxx and Navaids/navdb.hxx which provide a front
end loaders for the nav data.
- Added Navaids/navrecord.hxx which is a new "generic" nav data record.
- Removed Navaids/ils.hxx, Navaids/ilslist.cxx, Navaids/ilslist.hxx,
Navaids/mkrbeacons.cxx, and Navaids/mkrbeacons.hxx which are all now
depricated.
are many recognized limitations and inefficiencies with this entire approach,
however, it's a quick and dirty way to get something working, where before
we didn't.
Here's a patch to locate the base package inside the application bundle on OS-X. The patch also disables the CPSForeground hack in boostrap.cxx, which is unnecessary if the we're running as a proper bundle rather than a Unix command line program.
Both of these changes are only compiled if OSX_BUNDLE is defined (I'm doing this via a setting in ProjectBuilder), so if you're building on OS-X using configure + make, you shouldn't see any chance.
now read the config file out of the individual aircraft directory rather
than the collective Aircraft-yasim/ directory (which is now obsolete.)
This requires a corresponding update of the base package cvs.
$FGROOT/data/Aircraft hierarchy. There could be some long term performance
concerns if a person has a *huge* collection of aircraft or a really slow
file system, but I see zero performance blip here from recursing the default
CVS tree. We should also allow the user to specify the whole path to the
-set.xml file if they don't want to recurse ... this way we could eventually
come up with an aircraft selection dialog box on the front end so the user
could manually walk the tree to the desired aircraft. There also the system
wouldn't have to search for the aircraft.
functions (note to Norman: I looked at the web page you listed and that
looks like a good idea, but I don't have time right now to go through and
debug an entirely new routine. What we have works well enough for now I hope!)
immediate end to glut, only that I'm going through and cleaning up (and
taking inventory of the actual glut dependencies in case I want to investigate
SDL.)
I have added a fledgling replay system that records flight data and control
positions during the flight.
I have added an internal command called "replay" which will trigger a replay
of the entire saved flight data set. This could be bound to a keyboard or
menu command, in fact this entire module is screaming for someone to build
a gui to control playback speed, amount of playback, etc.
This is the initial version so there are kinks that still need to be worked
out, please be patient.
etc.
Improved the weather system to interpolate between different
elevations and deal with boundary-layer conditions. The configuration
properties are now different (see $FG_ROOT/preferences.xml).
requested parameters to determine if this should be an on-ground vs. in-air
start. The problem was that we never defaulted the value to anything so
if we didn't match an in-air condition, we simply inherited whatever value
was there from before.
scene management code and organizing it within simgear. My strategy is
to identify the code I want to move, and break it's direct flightgear
dependencies. Then it will be free to move over into the simgear package.
- Moved some property specific code into simgear/props/
- Split out the condition code from fgfs/src/Main/fg_props and put it
in it's own source file in simgear/props/
- Created a scene subdirectory for scenery, model, and material property
related code.
- Moved location.[ch]xx into simgear/scene/model/
- The location and condition code had dependencies on flightgear's global
state (all the globals-> stuff, the flightgear property tree, etc.) SimGear
code can't depend on it so that data has to be passed as parameters to the
functions/methods/constructors.
- This need to pass data as function parameters had a dramatic cascading
effect throughout the FlightGear code.
The one to fg_init.cxx initialises the AI subsystem regardless of whether it's enabled or not so that later enabling by the user doesn't crash it, and the one to main.cxx avoids running the ATC manager and ATC display system unless enabled.
I've fixed a bug in FGRunways::search(aptid, tgt_hdg) which wasn't working properly for airports with multiple parallel runways. I've also firmed up and pulled out into it's own function the GetReverseRunwayNo code, and done some input checking.
As a result of fixing the above in runways.cxx, I've pulled out the
parallel implementation in the functions that set position by airport and
heading/runway number in fg_init.cxx and called the runways functions
instead.
earlier, before fgInitSubsystems().
Modify fgInitPos() so that the plane is not automatically aligned with
a runway when an airport is the reference point unless (a) a runway
was explicitly requested, or (b) the plane is on the ground with no
offset distance specified. To set up the plane lined up on an
approach to a runway, use something like
fgfs --airport=CYOW --runway=32 --altitude=300 --offset-distance=0.5
This way, it's possible to specify a starting position relative to an
airport without getting snapped onto a runway approach (unless you
want to be).
04Feb. Actually been running since the beginning of January with these
patches. All changes work without crashing with the current base package cvs,
but there are some visual problems with the views (other than pilot view)
without changes to the base package.
As soon as you can build test and commit I can add in those base package
updates that will make it all work nicely. I will also go through all the 3D
Aircraft configs to make sure the change in the "pitch-offset" for cockpit
views (see below) are made to maintain current behavior.
Here are the files (changes listed below):
http://www.spiderbark.com/fgfs/viewerupdate.diffs.gzhttp://www.spiderbark.com/fgfs/viewerupdate.tar.gz
if the station is too far away. Instead, simply return the closest station.
All the code that searches navaids does it's own range checking anyway.
This will make the navlist query functions a bit more useful for other
types of functionality where you may need to lookup a station without
consideration of range (i.e. presetting your position relative to a navaid.)
input bindings. They will work only with the latest CVS; otherwise,
./configure will disable them. There is a new command, 'script',
which takes a single argument, also called 'script', containing PSL
code (currently PSL requires a main() function).
Erik Hofman has written some more elaborate code for triggering PSL
code from drop-down menus and scheduling events; I will look at
integrating that next.
option to specify a starting airport + specific runway. If you don't specify
a runway, you get the one that's closest to your specified (or default)
heading.
The general idea is to help clean up some aspects of the FDM init and be
able to provide startup conditions in a less ambiguous manner.
Previously, things like positions, orientations, and velocites were set on
"the bus". These had to be read by the FDMs which then were supposed to
initialized themselves to those values and turn write around and start
modifying those values. It was messy and cumbersome.
Now, all the initial fdm conditions are written to a sub-[property-]tree
under /sim/presets/
The values in /sim/presets/ always stay set to what the user has specified.
The user can change these at his/her liesure, and then request a "reset"
which will reset to the new conditions. I don't even want to say how this
worked before. :-)
Now, an script, or gui interface can stage a set of initial conditions while
the sim is running (without disrupting it), and then call "reset" to commit
the change.
People who should worry about all this are FDM writters, and a small few
others who care about over all program structure and flow.
The biggest and coolest patch adds mouse sensitivity to the 3D
cockpits, so we can finally work the radios. This ended up requiring
significant modifications outside of the 3D cockpit code. Stuff folks
will want to look at:
+ The list of all "3D" cockpits is stored statically in the
panelnode.cxx file. This is clumsy, and won't migrate well to a
multiple-aircraft feature. Really, there should be a per-model list
of 3D panels, but I couldn't find a clean place to put this. The
only handle you get back after parsing a model is a generic ssg
node, to which I obviously can't add panel-specific methods.
+ The aircraft model is parsed *very* early in the initialization
order. Earlier, in fact, than the static list of allowable command
bindings is built in fgInitCommands(). This is bad, as it means
that mouse bindings on the instruments can't work yet. I moved the
call to fgInitCommands, but someone should look carefully to see
that I picked the right place. There's a lot of initialization
code, and I got a little lost in there... :)
+ I added yet another "update" hook to the fgRenderFrame routine to
hook the updates for the 3D panels. This is only required for
"mouse press delay", and it's a fairly clumsy mechanism based on
frame rate instead of real time. There appears to be delay handling
already in place in the Input stuff, and there's a discussion going
on about different mouse behavior right now. Maybe this is a good
time to unify these two (now three) approaches?
Now the options can be localized as well. This adds a slight problem for
the --language options, but not that much (worst case, the strings are
loaded twice consuming some more memory). I tried to be as accurate as
posiible when copying the options texts, but there might be some
mostakes left.
This adds supports for a language specific font, defined in locale.xml
I've also moved the fgInitLocale() routine from main.cxx to fg_init.cxx
to prevent an ungly extern definition in options.cxx.
Here is a FGIO class derived from FGSubsystem that replaces the fgIOInit()
and fgIOProcess() functions. The FGIO::update(double delta) doesn't use the
delta argument yet. I suspect it could be used as a replacement for the
calculated interval value but I'm not familiar enough with that piece of code
just yet.
I've also added two "command properties" to fg_commands.cxx that select the
next or previous view. Writing any value to these properties triggers the
corresponding action. As an example I modified my keyboard.xml:
<key n="118">
<name>v</name>
<desc>Next view</desc>
<binding>
<command>property-assign</command>
<property>/command/view/next</property>
<value type="bool">true</value>
</binding>
</key>
<key n="86">
<name>V</name>
<desc>Prev view</desc>
<binding>
<command>property-assign</command>
<property>/command/view/prev</property>
<value type="bool">true</value>
</binding>
</key>
And of course these actions can also be triggered from external scripts via
the props server.
This is a new improved patch for the previous tile manager fixes.
Rather than building dependencies between FGlocation or the viewer or fdm with
tilemgr what I ended up doing was linking the pieces together in the Mainloop
in main.cxx. You'll see what I mean...it's been commented fairly well. More
than likely we should move that chunk somewhere...just not sure where yet.
The changes seem clean now. As I get more ideas there could be some further
improvement in organizing the update in tilemgr. You'll note that I left an
override in there for the tilemgr::update() function to preserve earlier
functionality if someone needs it (e.g. usage independent of an fdm or
viewer), not to mention there are a few places in flightgear that call it
directly that have not been changed to the new interface (and may not need to be).
The code has been optimized to avoid duplicate traversals and seems to run
generally quite well. Note that there can be a short delay reloading tiles
that have been dropped from static views. We could call the tile scheduler on
a view switch, but it's not a big deal and at the moment I'd like to get this
in so people can try it and comment on it as it is.
Everything has been resycned with CVS tonight and I've included the
description submitted earlier (below).
Best,
Jim
Changes synced with CVS approx 20:30EDT 2002-05-09 (after this evenings updates).
Files:
http://www.spiderbark.com/fgfs/viewer-update-20020516.tar.gz
or
http://www.spiderbark.com/fgfs/viewer-update-20020516.diffs.gz
Description:
In a nutshell, these patches begin to take what was one value for ground
elevation and calculate ground elevation values seperately for the FDM and the
viewer (eye position). Several outstanding view related bugs have been fixed.
With the introduction of the new viewer code a lot of that Flight Gear code
broke related to use of a global variable called "scenery.cur_elev".
Therefore the ground_elevation and other associated items (like the current
tile bucket) is maintained per FDM instance and per View. Each of these has a
"point" or location that can be identified. See changes to FGLocation class
and main.cxx.
Most of the problems related to the new viewer in terms of sky, ground and
runway lights, and tower views are fixed.
There are four minor problems remaining. 1) The sun/moon spins when you pan
the "lookat" tower view only (view #3). 2) Under stress (esp. magic carpet
full speed with max visibility), there is a memory leak in the tile caching
that was not introduced with these changes. 3) I have not tested these
changes or made corrections to the ADA or External FDM interfaces. 4) The
change view function doesn't call the time/light update (not a problem unless
a tower is very far away).
Details:
FDM/flight.cxx, flight.hxx - FGInterface ties to FGAircraftModel so that it's
location data can be accessed for runway (ground elevation under aircraft)
elevation.
FDM/larsim.cxx, larcsim.hxx - gets runway elevation from FGInterface now.
Commented out function that is causing a namespace conflict, hasn't been
called with recent code anyway.
FDM/JSBSim/JSBSim.cxx, YASim/YASim.cxx - gets runway elevation from
FGInterface now.
Scenery/newcache.cxx, newcache.hxx - changed caching scheme to time based
(oldest tiles discard).
Scenery/tileentry.cxx, tileentry.hxx - added place to record time, changed
rendering to reference viewer altitude in order to fix a problem with ground
and runway lights.
Scenery/tilemgr.cxx, tilemgr.hxx - Modified update() to accept values for
multiple locations. Refresh function added in order to periodically make
the tiles current for a non-moving view (like a tower).
Main/fg_init.cxx - register event for making tiles current in a non-moving
view (like a tower).
Main/location.hxx - added support for current ground elevation data.
Main/main.cxx - added second tilemgr call for fdm, fixed places where viewer
position data was required for correct sky rendering.
Main/options.cxx - fixed segfault reported by Curtis when using --view-offset
command line parameter.
Main/viewer.cxx, viewer.hxx - removed fudging of view position. Fixed numerous
bugs that were causing eye and target values to get mixed up.
Removed configuration option --with-new-environment and
FG_NEW_ENVIRONMENT macro.
Added configuration option --with-weathercm and FG_WEATHERCM macro.
FGEnvironment is now the default; use --with-weathercm to get the old
weather.
I have finished working the bugs out of my "Enhanced" version of the Magic
Carpet FDM. The UFO FDM works the same as the Magic Carpet with the
following exceptions:
The aircraft's pitch is determined by the Elevator setting (with a pitch
rate of 45 degrees per second).
Climb is forward velocity * sin(pitch)
Speed is forward velocity * soc(pitch)
Roll is tied to the aileron (again, with a roll rate of 45 degrees per
second)
Turn rate is sin(roll) * 45 degrees.
Yes, this does mean that turning is quite a bit more sluggish than
climbing.
If you are wondering why a UFO FDM, it is because it's best that I not
replace the existing magic carpet and this FDM does behave like a UFO (it
hovers, can spin and pitch while hovering, and does not obey the laws of
physics ;)
Minor fixes. Made some changes to get lighting correct for time of day
for now. MSVC compatibility fix and returned to clearing z-buffer only in
LOOKFROM (formerly pilot view).
[dpm: removed the last one, since I had already made a similar patch]
Here are the Boost-less FGEventMgr updates I promised.
Removed Boost dependencies from FGEventMgr.
Removed Boost configure check.
fgMethodCallback now handles const member functions.
I've successfully tested these changes with gcc and msvc.
Synced to CVS 19:36 EDT 2002-04-10 (after this evenings JSMsim and Base
package updates).
Description:
Added FGLocation class which is new home for calculating matrix rotations.
Viewer can now be configured to access rotations created by the model rather
than repeating the same calculations again.
Changed model initialization for the time being so that its location data is
available for the viewer (currently required by other subsystems). At some
point we can move this back to fg_init along with the viewer initialization.
Seperated the update from the draw function in the model code. The viewer
code needs the same matrix data, and moving the update portion at this time
does not increase the number of matrix math iterations.
Moved the model draw so that it always appears "in front" of lights and clouds.
Reogranized viewer update routine for using the FGLocation class and
simplified some more tasks. The routine is fairly easy to follow now, with
the steps ordered and spelled out in comments.
Viewmgr only updates the current (visible) view now, with the exception of an
old reference to "chase view" that will be corrected in forthcoming changes.
Also will be doing some work on the viewmgr outputs.
Model is now clears the z-buffer in all modes. This will be changed with the
next viewmgr update. The only side effect is that models always disappear
when over 5km distant from the eye point (can't really see them anyway:-)).
Other than a flag to indicate "internal" view I don't anticipate the
configuration interface for viewmgr/views will be changed a lot for now. It
is close to done. The next viewmgr update will however rework the outputs so
may change location.
This code will run with the previous version of preferences.xml, but will run
faster with the newer version. I am attaching a preferences.xml that should
not be commited before the code. All the changes are in the /sim/view section
and should show a simpler view configuration that references model locations.
Note that I've added a 2nd tower view in "lookfrom" mode for illustration
purposes. You can look around using the mouse. You may want to remove that or
comment it out.
Minor patches to initial tower view code. Added calculation for "tower" at
any airport, placed a couple fractions of a degree off the center. Moved the
farplane from 100m to 5km so that "lookfrom" mode can see the model. 5km is
still in a reasonable range for a depth buffer. Note that looking at a model
anything but a small distance will cause some problems on older cards.
Temporarily changed viewer to always report elevation/lon/lat of the aircraft
in order to avoid a problem with the ground trim getting recalculated when
tower and aircraft are on different tiles.
radiostack.cxx, fg_init.cxx and main.cxx. If these changes are accepted
then you can remove Time/event.[ch]xx and Include/fg_callback.hxx from
the repository.
case logging is disabled). This way, when people specify a
non-existant aircraft or have an error in a custom XML file, they'll
get an error report, at least.
system. A chap from Germany called Alexander Kappes (cc'd) got
in touch with me a few weeks ago and has written the start of
Approach control. At the moment tuning in to a valid approach
frequency (Dortmund or East Midlands) should result in vectors to
a spot about 3 miles from the active runway, and a telling off if you
stray too far from the correct course, in the console window. He
seems to know what he's doing so expect this to improve rapidly!!
I've added a rudimentry AI manager and a hardwired Cessna at
KEMT on the runway - I'll remove it before the next release if I don't
have it flying by then. There seems to be an issue with framerate
which drops alarmingly when looking at it - I've a feeling that I've
possibly created several Cessnas on top of each other, but am not
sure.
- implement the standard FGSubsystem interface, for consistency
- eliminate current_autopilot and add get/set_autopilot to FGGlobals,
for consistency
- use private methods rather than static functions for tying
properties
There should be no change in functionality.
is a work in progress and needs severe enhancement before it will be
useful. It provides a UDP data channel that goes both ways between
flightgear and the fdm. It also provides a TCP 'command' channel so
flightgear can 'reliably' send commands to the remote fdm (such as set
starting position, reset on ground, etc.)
subsystem to Flightgear. No more functionality is implemented
than at present (apart from an ATIS bug-fix - station wouldn't
change if the radio was switched directly from one station to
another) but it is much neater than the current hack and should be
easily extendable.
Some cruft is still probably left over in radiostack.[ch]xx such as
the bindings to the comm frequencies but I'll leave removing those
until I'm sure they're not needed there.
Added two new properties:
/environment/temperature-sea-level-degc
/environment/pressure-sea-level-inhg
These are now supported in FGEnvironment as well, though they always
have the same value for now. They need to be hooked up to the FDMs.
different locations, and hitched it into FGGlobals. FGEnvironmentMgr
has taken over as the subsystem, while FGEnvironment is simple the
information that it returns. I've removed current_environment
completely -- everything now uses properties or goes through
FGGlobals. FGGlobals itself has a couple of useful methods:
const FGEnvironment * get_environment ();
const FGEnvironment * get_environment (double lat, double lon, double alt);
The first one returns the environment data for the plane's current
position, while the second returns the environment data for any
arbitrary location. Currently, they both return the same information,
but that will change soon.
