I still work on getting the YASim models see the detailed environment
especially the carrier.
I have *forgotten* to initialize and to destruct the ground cache object!
Oooopppss!
The attached patch allows to put comments in *.stg files[1]. Lines with
# in the first column (and only there!) are skipped. This has no effect
on overall performance, but has two advantages:
A) possibility to temporarily comment out objects during scenery design,
(or to put other remarks there);
B) possibility to put marks like "# BEGIN" and "# END" there that allow
automated merging of local landmarks etc.
--
[1] actually, comments are possible now, too. But they aren't explicitly
handled and fgfs tries to parse words in "comments" piece by piece. Ugly!
[2] Idea by Chris METZLER, that I make already use of. I have a local
scenery dir for some tiles with extra objects, such as VOR/DME for
all of Austria. These are surrounded by "# BEGIN LOCAL" and "# END LOCAL",
and today I was able to merge the new 0.9.7 scenery with my locally
changed files. :-)
I've finished the emigration of the radiostack, and I've also removed it
completely. It turned out that the comm radio is completely implemented in
the ATC subsystem. I've changed the affected ATC files to point
to /instrumentation/com, but I guess that the maintainer of the ATC code
should decide wether to make it configureable, and how.
I also had to change some files in Network and Main. The changes in network
should be obvious, but the changes in Main were a bit suspect. The files
included radiostack.hxx, but they weren't directly depending on
radiostack-hxx. They were depending on other files that were included by
radiostack.hxx. I got it to compile, but I'm not sure if I included the
correct directly depending file.
For the data directory I changed every occurrence of /radios/
with /instrumentation/ with this simple one-liner that I found on the net:
find -name '*.xml' -type f | xargs perl -pi -e
's/\/radios\//\/instrumentation\//g'
Instead of me sending all the files that got changed by this I suggest that
you execute the one-liner yourself. Of course I can not guarantee that this
will work perfectly, but I considered hand editing to be not an option (I'm
lazy). I don't want to test every aircraft to see if everything still works,
I think it's better to wait and see if anyone complaints about broken nav
radios/instruments.
This is a sub-system which can be added to any carrier.
These files add a functioning Fresnel Lens Optical Landing System (FLOLS).
The orange/red 'source' lights are illuminated according to the position of
the pilot's eye above/below the 3.5 deg glide slope. The apparent position
of the source light relative to the fixed green datum lights allow the pilot
to 'fly the meatball'. The green 'cut' lights flash when the pilot's eye is
below the coverage of the lowest (red) source light.
TODO - add rules for the operation of the wave-off lights.
I understand that the new hud/runway feature is still very experimental,
and that the search criteria for the active runway don't necessarily make
much sense. (We are searching for a runway on /sim/presets/airport-id
that matches the current wind direction best, and not the tuned in ILS
runway or something!)
Anyway: the new hud code completely denies the possibility of
globals->get_runways()->search() not finding a runway and returning false.
There's always a runway found at KSFO, but not so at e.g. LOXL, in which
case we are handing garbage over to sg_geodesy.cxx and find ourselves
caught in an endless loop in geo_direct_wgs_84().
Okay, here's the latest update to the tarffic manager/AI Manager. AITraffic
can now fly multiple routes and be initialized while sitting statically at
airports.
currently just returns a lagged normalized value in the range of 0-1 that
is proportional to N1. It's up to the engine gauge to scale to the right
range. This is for lack of a real model of these items so we can have
something to drive the engine gauges.
I have now split out the ground cache functions into src/FDM/groundcache.[ch]xx
Attached are the two files and the patch to integrate that cache into
FGInterface.
The code is nowhere used at the moment, the fdm's need to be updated to use
that ground cache. The JSBSim-dropin.tar.gz from Martins ftp server does this
for example.
The carrier's scenegraph is not yet processed to be visible for ground
intersection testing. So the only benefit up to now is that the api is set
up. Using this I can put the changes to make JSBSim work with that into
JSBSim's cvs. Also I aim to provide Andy a patch to make use of that with
YASim.
Use a suggested exit method as described in the SDL_Quit man page. (fgOSExit() is still uncalled in both fg_os.cxx (glut) and fg_os_sdl.cxx, which makes these functions kind-of useless.) The other changes are fixes for gcc 3.3.4 warnings.
directory and over to the Instrumentation directory and make them modular
in the sense of being able to pick and choose what you include with any
particular aircraft.
Aaron says:
I just got the virtual runway hud projection working on all views and
2D & 3D HUDs. It is working awesome(see below). I have attached every
file that was modified (hud.hxx, hud.cxx, and the default.xml for the hud)
and every file that was added (hud_rwy.cxx and runwayinstr.xml).
Just a quick overview of how the instrument works.
The virtual runway is projected by getting the "cockpit view" of the
runway in 3D and projecting the points on to the 2D HUD. Therefore, the
virtual runway will be displayed the same in every view. For example,
you can land an aircraft from the "Tower View" by flying the HUD. Also
if you're in "Cockpit View" and it is centered then the virtual runway
lines will perfectly outline the actual runway. I am getting the active
runway via the wind like done in the ATC classes, which may need changed.
Also, I made the assumption the view 0, in view manager, is always the
cockpit view, which may need changed as well.
The runway configuration file will allow you to specify a center offset
(x,y) and a bounding box (width,height). You can also configure the line
stipple pattern for the outside and the center line. For instance, if
you wanted a 0xFAFA pattern, then specify 64250 as the value. If you
want a solid line, you can specify -1 or 65535 (0xFFFF) and zero will
turn the line off. It also draws a runway indication arrow when the
runway is not in the HUD or it can be drawn all the time if arrow_always
is true. The arrow will point in the direction of the runway (2D) by
rotating around the center at a radius of arrow_radius. If you wish to
turn the arrow off, you must set the arrow_scale <=0. The arrow really
should be 3D arrow that points to the runway (or points in the direction
of the aircraft-to-runway vector).
Add some controls required for carrier operations:
/controls/gear/launchbar
should be 1.0 if the launchbar is lowered, that means the aircraft should now
be arrested at the catapult.
/controls/gear/catapult-launch-cmd
Should be set to 1.0 when the aircraft should be launched from tha catapult.
The moving ai models will jump around realtive to the moving aircraft model.
I can see that with the carrier but others have noticed that too with ai
aircraft before.
The reason is that all SGSystems are called with a dt value which is not
necessarily a multiple of 1/hz.
In contrast, most FDM's use the _calc_multiloop function from FGInterface
which forces the time update to be a multiple of 1/hz for the FDM aircraft.
As a result, in the worst case, the FDM aircraft has moved nearly 1/hz seconds
further than the rest of flightgear (1/120sec*300kts that is about 1.3m).
That patch forces the time update to be a multiple of 1/hz.
systems. Fix a couple bugs/oversights.
- atc610x.cxx: Much code has moved into the configurable input mapper
(ATC-Inputs.cxx) and the remaining input massaging code has moved into
the atcsim.nas module.
We have decided that hardcoded initialization of instruments and systems is
bad. So we remove them.
Hardcoded initialization is bad because it can't be overridden from config
files or from the command line. We prefer to do it through config files that
should be, eventually, aircraft specific (*-set.xml), not global
(preferences.xml).
I attach the latest version of Nimitz. The textures have been improved. A glide-path has been added, it is on by default, but can be switched off by means of the properties browser: /ai/models/ship/controls/glide-path. The origin has been adjusted to the turning pivot and approximate roll center.
Modified AiShip files are also attached. These allow the radius of the turning circle of a ship to be input. The turning circle is adjusted for speed and rudder angle. Roll has been corrected so that a ship leans out of a turn, not inwards like an aircraft. The roll angle is adjusted for speed and rudder angle (yes, application of more rudder reduces roll angle - rudders act as stabilizers).
TODO
Add a relative wind calculation so that a carrier can be turned to the appropriate launch and recovery courses.
Add a 'flight plan' so that the carrier can carry out a racetrack for flight ops.
Add a projector landing sight.
Add auto-land facilities.
The caption should already be set when the window is opened. This is
important for some window managers. (KDE's kwin, for example, can store
special settings for certain windows, such as "no border" and "always
on top". KDE uses the window title to determine if a special rule is
to be applied. KDE will be made more tolerant, too.)
Here are files to get automated contrails working. I've set up contrails for
the 737, using my simple, untextured contrail model. Vivian has made another
contrail model, but I'm still trying to get his to work. I'm hoping others
will try to make contrail models also.
Here's some code that defines a top to thermals. When the top of a thermal is
reached the strength is phased-out linearly over the next 100 feet of
altitude. At first I tried just capping the thermal at the top, but the
change in thermal strength was too fast for the FDM to handle well.
Included is a new version of the thermal scenario that includes a top
(height-msl) to the thermal. The default value is 5000 feet.
on the ground) -- this is based on some wild guesses, but it seems
reasonable for now.
The next step will be to give the compass some angular momentum so
that it does not snap instantly to a heading, and so that it can
overshoot a heading and oscillate.
