- implement the standard FGSubsystem interface, for consistency
- eliminate current_autopilot and add get/set_autopilot to FGGlobals,
for consistency
- use private methods rather than static functions for tying
properties
There should be no change in functionality.
is a work in progress and needs severe enhancement before it will be
useful. It provides a UDP data channel that goes both ways between
flightgear and the fdm. It also provides a TCP 'command' channel so
flightgear can 'reliably' send commands to the remote fdm (such as set
starting position, reset on ground, etc.)
includes the ability to specify per vertex normals rather than depending
the normals list being the same as the vertices list. (Support for
previous binary file format scenery is maintained.)
This seems to pretty much correct the problem. Part of the problem is that
rotations are occuring at the firewall (model origin) which seems a little
un-natural inside the cockpit. The rest of the problem is I am just learning
how this stuff works (I know I've been saying this for a couple months
now...but hey I'm slow :-)).
* Add new trigger types: raise, fall
* Add new trigger offset parameter
* Add new volume/pitch types: inv, abs, sqrt
* Add initial support for multiple events to intervere in a single sound
(by using the same name, see the crank section of 172-sound.xml)
* Cached the volume/pitch type fucntions
(No more if's inside the loops in update())
created a new class, FGViewPoint (declared in viewer.hxx) that holds a
single position in FlightGear coordinates, and have used it to factor
a lot of the common code out of viewer_lookat.cxx and viewer_rph.cxx.
I don't know whether this new class will stay or not; it might just be
a temporary step, or it might end up taking over much of the current
viewer functionality. It would be a bad idea to code against it right
now.
plane to 0.2; otherwise, use the old defaults.
This is a temporary step that will allow me to work on a 3D cockpit
without breaking current behaviour; the final approach will be to put
the 3D model in its own scene graph, with different clipping plane.
OK, attached is a replacement for mouse.cxx that works the view using
the view-offset/tilt interface, rather than the (kinda odd) GuiQuat
stuff. It's kind of a hack job, as I left the hooks to GuiQuat in in
other places for fear of breaking something. Still, it removed more
code from mouse.cxx than it added, which has to count for some
elegance points.
Oh yeah, I forgot to send that one along. This one is my bug, I
goofed the precedence in the fgPanelVisible() function in panel.cxx
such that the panel was *always* visible if virtual cockpit was
enabled. Here's a replacement. I've modified the style from a single
boolean expression to an if-list, since that's more readable to my
eyes for expressions this big:
and soon to be renamed) is true, FlightGear will draw the 3-D model
even in internal view. This makes sense right now only with the C310
model, since the others don't have any kind of interiors modeled and
all surfaces in all models are one-sided.
This isn't quite working yet -- the view code is very hard to
disentangle, and currently, if the view is not forward, roll and pitch
are applied incorrectly. It looks interesting (modulo a messy model)
on the ground, in level flight, or looking straight ahead under any
other flight conditions.
to 10m after takeoff, but that doesn't really make sense any more,
especially if models are going to have interior views. Is there any
real saving in pushing the near plane out anyway?
was some confusion between degrees and radians which would lead to a huge
goal_view_offset value. The display would sit and spin for a *long* time
trying to wind it's way up to this large value.
difference between the two is this: A sample is file related and sound
is a authonomus entity. This means you can have several sounds pointing
to a single sample. In that case, just one sample is loaded into memory.
The advantage is you can play the same sample with different pitch or
volume, but with just one sample loaded into memory.
To fully support this there is a new fucntion call:
FGSimpleSound *sample = new FGSimpleSound("filename");
mgr->add(sample, "name");
should be replaced by:
FGSimpleSound *sample = mgr->add("name", "filename");
But the old behaviour is still supported with one minor change, sounds
with the same name aren't supported anymore.
Erik
Actually, I think I'm off the hook here; the problem is pre-existing.
What's happening is that the x/y offsets enter the modelview matrix at
line 346 in the current panel.cxx. But note that the same
transformation also occurs before each instrument rendered at line
403. What's happening is that the instruments are double-translated
relative to the background.
Unless I'm not understanding something, the one inside the instrument
render loop looks unnecessary. Removing it fixes the issue and
doesn't cause any bugs that I can find. It also fixes a bug where you
could scroll the instruments on top of the 3D panel, where the offsets
are supposed to be ignored. :)
Attached is a new panel.cxx which fixes that bug, and substantially
simplifies the virtual panel code (the matrix inversion that I thought
was needed wasn't, but there were some offsetting scale bugs that hid
the problem).
These changes add to the "Add Waypoint" dialog so that you can see the entire
list in the pui dialog that you are adding to. Also made some minor changes
so that the autopilot is now activated (toward first waypoint target heading)
when a waypoint is added.
command will save *all* properties, rather than just those marked as
archivable. This feature was requested by Tony Peden to make it
easier to write documentation on the properties, but it should also be
useful for debugging. There is currently no default binding for the
command with the write-all parameter set to true.
What the attached patch does is map your panel definition onto a (non
z-buffered) quad in front of your face. You can twist the view around
and see it move in the appropriate ways.
Apply the patch (let me know if folks need help with that step), and
then set the /sim/virtual-cockpit property to true. You can do this
on the command line with --prop:/sim/virtual-cockpit=1, or via the
property picker. Bind it to a key for fast toggling if you like.
The default bindings don't allow for "panning" the view, so you'll
have to modify yours. These are the mappings to my joystick's hat
switch, for those who need hints:
<axis n="6">
<desc>View Direction</desc>
<low>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/view/goal-offset-deg</property>
<step type="double">1.0</step>
</binding>
</low>
<high>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/view/goal-offset-deg</property>
<step type="double">-1.0</step>
</binding>
</high>
</axis>
<axis n="7">
<desc>View Elevation</desc>
<low>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/view/goal-tilt-deg</property>
<step type="double">1.0</step>
</binding>
</low>
<high>
<repeatable>true</repeatable>
<binding>
<command>property-adjust</command>
<property>/sim/view/goal-tilt-deg</property>
<step type="double">-1.0</step>
</binding>
</high>
</axis>
While the current implementation is happy with just plastering the
panel's notion of "screen" into the 3D world, this is actually more
general. Each panel can, in principle, have it's own coordinate
system, and you could build a cockpit out of a bunch of them. The
mapping is specified by providing a 3D coordinate for three corners of
the quad the panel should be mapped to; this should be pretty simple
to work with.
All that's needed for a perfectly general solution is a convention on
where to store the information (a cockpit xml file, or put it in the
aircraft -set file, or...), and some work on the panel's coordinate
system conventions (some of which don't coexist very nicely with a
generalized 3D environment). Combine that with a plib model for the
non-panel interior of the cockpit, and we're golden.
I'm actually really pleased with this. It worked better and more
quickly than I could have imagined, and impact on the surrounding code
is quite light -- a few property tests only. But some stuff is still
missing:
+ No equivalent work was done to the HUD, so it still displays
incorrect headings when the view changes. The use of pixel
coordinates deep in the HUD code is going to give me fits doing the
port, I sure. It's not nearly so well put together as the panel
(where I just changed the setup code -- none of the rendering code
changed at all).
+ I forgot that the panel was clickable. :) Input events still have
the screen coordinates, which essentially kills the interactivity
when in virtual cockpit mode. This won't be hard to fix; it's only
broken because I forgot the feature existed.
And one note about the implementation choice: to get away from the
inevitable near clip plane issue, the virtual cockpit renderer simply
disables the z buffer. This means that cockpits built using these
panels need to be z-sorted, which isn't too hard since they are static
geometry. It also means that no two "virtual panels" can ever be
allowed to interpenetrate. No biggie.
actually very powerful when combined with factor and offset -- for
example, on the C310 model the nose wheel can now retract completely
before the doors start closing.
subsystem to Flightgear. No more functionality is implemented
than at present (apart from an ATIS bug-fix - station wouldn't
change if the radio was switched directly from one station to
another) but it is much neater than the current hack and should be
easily extendable.
Some cruft is still probably left over in radiostack.[ch]xx such as
the bindings to the comm frequencies but I'll leave removing those
until I'm sure they're not needed there.
newauto.cxx. Basically everything is the same functionally except for a
changed in the initial altitude setting to 3000ft instead of meters (the panel
is in feet).
and scaling of control values to properties. Also added a time interpolation
feature that replaces the hacked-in "retract-time" feature for the gear in
a more general way (applicable to flaps, too!). Incompatibly breaks
the XML syntax; get new files!
individual aircraft to have different sounds (and cleaning up my code
a fair bit). The most important user-visible change is the renaming
of the /sim/sound property to /sim/sound/audible.
(other than "none") is "spin", which must be tied to a property giving
a value in RPM. This gets the DC-3 propellers turning. The next type
will be "rotation", which will allow the flaps, elevators, ailerons,
and rudders to move (and even gear, eventually). Later, I'll add
"shift" for sliding things around, and will figure something out for
blinking lights.
the XML file, including the path to the 3D file.
This change obsoletes the existing /sim/model/*-offset-deg and
/sim/model/*-offset-m properties in the main property tree, and
replaces them with /offsets/*-deg and /offsets/*-m in the model
property file. The /path property in the model XML file is relative
to the XML file's location rather than FG_ROOT.
Added two new properties:
/environment/temperature-sea-level-degc
/environment/pressure-sea-level-inhg
These are now supported in FGEnvironment as well, though they always
have the same value for now. They need to be hooked up to the FDMs.
different locations, and hitched it into FGGlobals. FGEnvironmentMgr
has taken over as the subsystem, while FGEnvironment is simple the
information that it returns. I've removed current_environment
completely -- everything now uses properties or goes through
FGGlobals. FGGlobals itself has a couple of useful methods:
const FGEnvironment * get_environment ();
const FGEnvironment * get_environment (double lat, double lon, double alt);
The first one returns the environment data for the plane's current
position, while the second returns the environment data for any
arbitrary location. Currently, they both return the same information,
but that will change soon.
properties have been renamed from wind-(north|east|down)-fps to
wind-from-(north|east|down)-fps, and the FDMs modified appropriately.
No other changes should be visible unless FG_OLD_WEATHER is defined.
Attached are patches for adding the command line options to set initial
glideslope and climb rate. This was really easy to do as all the pieces
were in place. It works well with JSBSim because the trimming routine
finds the right throttle and elevator settings. It should work with
LaRCsim as well, but it has no trimming routine so there will be some
dynamics at startup. I don't know what YASim will do.
the panel controls for the autopilot. The heading dialog would only show the
last setting you did through it, even if it was later tweaked with the bug on
the hsi. The altitude dialog did a similar thing. Now the values default to
the same that show on the panel displays.
via the command line (--enable-clock-freeze / --disable-clock-freeze)
and can be toggled during a run. However this property is not currently
bound to any menu or keystroke so you have to do it via the gui property
interface or externally via the web property browser or a script.
are being driven from an external data source.)
Akso found and fixed a bug in the simgear that caused the time to go goofy
temporarily while scenery was being loaded.
as well as visibility.
This means that if you are using this protocal to exchange data with a
visual channel, you should be able to change time and visibility on the master
and all the slaved visual channels will match it.
Attached is a fix to add a short period of cranking time required
before the engine fires. I've also added a little hack to limit the
torque applied by the starter motor when the rpm is less than 10 in
order to avoid the rpm overshooting idle in the first time step when
the prop is producing very little resistance due to the low rpm.
- remove buffer with class scope
- remove variable 'length' (isn't used anywhere)
- make process_command private (it isn't used anywhere outside, and it
shouldn't be)
- define buffers where they are needed (two places)
- comment out stale debug message (it doesn't buy anything, because the
contents are output two lines below, anyway)
- let every error message begin with "ERR ". This makes error messages
less beautiful, but easier to recognize for scripts. Every internet
protocol that outputs text, has such a tag for distinguishing regular
output from error messages. (pop3 uses "-ERR ", smtp uses error codes,
etc.)
- fix html bug (<form> was closed by another <form>, instead of </form>)
- remove useless <br>
- fix a bug, that would have truncated an argument containing a '&'
- extend the comment for urlEncode: cite the concerned RFC
max(width, height) by default (easily changeable) rather than just width.
(src/GUI/gui.cxx, src/Main/main.cxx, src/Main/viewer.cxx, src/Main/viewer.hxx)
This works on a CygWin build, and probably works on non-Cygwin builds
as well.
2. Enable FG to start even if audio is not available. (soundmgr.cxx)
Avoids the FGSoundMgr constructor crashing; the rest of FG then runs
OK without sound.
1. Enable auto-configure on more versions of auto tools. (configure.in)
2. Warnings from auto-configure tools. (src/Time/Makefile.am)
3. Typo: "the it's" -> "its". (docs-mini/README.Joystick)
4. Remove definition of FGViewer::update() that now is (or can be) pure
virtual\
. (src/Main/viewer.cxx)
5. Preferred form of function name according to comments in plib:
"not_working"\
-> "notWorking". (src/Sound/soundmgr.hxx)
format before reading/writing data from/to remote machine. This allows
different endian machines to talk to each other. Also added support for
passing time and time offset (warp) in the data packet.
I've attached 3 diffs against files in FlightGear to fix some printf
format strings. The changes are pretty straight forward. Let me know
if you have any questions. (BTW, I'm using gcc 2.95.4)
/sim/freeze/master (implimented)
/sim/freeze/fuel (implimented)
/sim/freeze/position (not implimented)
/sim/freeze/time-of-day (not implimented)
/sim/freeze/master is bound to the 'p' key via keyboard.xml, however,
/sim/freeze/fuel is not bound to anything at the moment so you must
change it via the external property interface, or specify an initial
value on the command line.
properties /sim/view/view-tilt-deg and /sim/view/goal-view-tilt-deg
control the tilt. There are (temporarily) keyboard bindings in the
base package for experimentation: Ctrl-O to tilt the view down, and
Ctrl-P to tilt the view up.
otherwise, the logic in FGEngine::ConsumeFuel breaks down and the
engine is starved when *any* feed tank is empty, rather than when all
feed tanks are empty.
FDM people. FlightGear now supports an unlimited number of fuel
tanks. Also added correct fuel-flow reporting for piston engines, and
tracked new features in SimGear property support.
other -- it is now possible to set properties at startup (such as an
autopilot altitude). The only user-visible change, other than the
fact that the properties work as they are supposed to, is that the
heading bug no longer starts at a random value.
function to allow property files as non-option parameters after the
options have finished (and added "--" to terminate options). It's now
possible to do something like
fgfs denver-am.fgd
or even
fgfs at-lax.fgd in-c310.fgd around-sunset.fgd
This works the same way as the --config option, but will be friendlier
for GUIs, where start-up situation files can now be associated easily
with FlightGear.
Changed _set_Accels_Pilot_Body to use FGAuxiliary::GetNpilot instead
of FGAuxiliary::GetPilotAccel. It looks like a similar change was
started but never finished, and there are artifacts still lingering.
With this change, the slip/skid ball now works reasonably on the C172
when in motion, but not at rest (that will have to wait for fixes to
the gear code).
material-specific logic is now removed from the material library and
encapsulated in the material class itself, and materials are loaded
from $FG_ROOT/materials.xml rather than $FG_ROOT/materials. This also
removes a nasty bug in the old material-loading code that caused a
floating-point exception.
- automake-1.4 sets default values for INCLUDES which we can't
overwrite.
- automake-1.5 renames this to DEFAULT_INCLUDES and leaves INCLUDES
open for the developer to use.
Thus for automake-1.4 we are forced to 'append' to INCLUDES and in
automake-1.5 we can just set the value to whatever we like.
Unfortunately, the behaviors of the two versions are mutually
incompatible.
The solution I am committing now works for both versions but
automake-1.5 generates a lot of spurious warning messages that are
annoying, but not fatal.
(i.e. multiloop). Most subsystems currently ignore the parameter, but
eventually, it will allow all subsystems to update by time rather than
by framerate.
beginning of main() for the exceptions that can be enabled (only
divide-by-zero is enabled by default, but you can uncomment any ones
you want); eventually, FlightGear should run cleanly with all FPEs
enabled.
(i.e. multiloop). Most subsystems currently ignore the parameter, but
eventually, it will allow all subsystems to update by time rather than
by framerate.
has absolutely no bearing on actual wheel performance and has nothing to do
with the fdm. It is just a simplistic wheel spin velocity model used to
avoid subsequent squealing when a tire is bouncing, or touches down right after lifting off. If at some point tire spin is modeled by an FDM we could
transition to using real data.
FGInterface::_updateGeocentricPosition() for clarity. Also added an
FGInterface::_updateGeodeticPosition() since it is useful.
A few clean ups to native_fdm.cxx and raw_fdm.hxx.
These will log trace messages whenever a specific property value is
read or written through the property manager. They do not cause
FlightGear to poll bound values, so if a class variable that is bound
is changed directly, no trace message will be displayed.
These options are also useful in conjunction with a debugger.
--trace-read will cause the private SimGear SGPropertyNode::trace_read
method to be invoked, and --trace-write will cause the private SimGear
SGPropertyNode::trace_write method to be invoked; in a debugger
session, a user can set breakpoints on these methods then get a
backtrace to see what specific points in the code are reading or
writing properties.
works like this:
1. Parse preferences.xml, which will usually specify a default
aircraft using the /sim/aircraft property.
2. If /sim/aircraft is specified and not empty, parse the properties
in $FG_ROOT/Aircraft/{/sim/aircraft}-set.xml to set up a default
aircraft.
3. During command-line parsing, whenever the --aircraft option appears
set /sim/aircraft appropriately and parse the properties in
$FG_ROOT/Aircraft/{/sim/aircraft}-set.xml. Any --config, --prop, or
--aircraft options afterwards will take precedence.
more intuitive. We switch to an include in the preferences.xml to include
the default model, and then if the user specifies --aircraft=, that is
expanded immediately so portions can be overwritten by subsequent command
line options.
Here's an unusual patch for FlightGear -- I've created .cvsignore
files for every source directory, to make CVS output more informative.
This is especially nice when using cvs-examine from (X)Emacs to look
for changes.
a top level aircraft def file (c172-set.xml)
preferences.xml or --aircraft= or any other property setting mechanism can
be used to set the property "/sim/aircraft". After all options and config
files are parsed, the contents of /sim/aircraft is expanded into a *-set.xml
file and loaded.
Note there is still a problem when doing a 'reset' after doing
a 'goto'. Curt says: I also see that doing two subsequent reset's on a
JSBSim model results in a segfault in a deconstructor deep inside JSBSim.
- changed all sound file properties to end in /path for pathname, and
added /sound and /pitch (with current values as defaults)
- don't activate the stall horn if CAS is less than 30kt (this needs
to be refined somehow)
- declarations to support changes to cxx file
Dynamics (Sim)ulator. Basically, this is a rough, first cut of a "different
take" on FDM design. It's intended to be very simple to use,
producing reasonable results for aircraft of all sorts and sizes,
while maintaining simulation plausibility even in odd flight
conditions like spins and aerobatics. It's at the point now where one
can actually fly the planes around.
- delete table in destructor
** src/FDM/flight.cxx
- bind engine properties in FGInterface::bind, and publish properties
for all engines rather than just engine 0
** src/Main/fg_props.cxx
- removed all engine properties; now bound in FGInterface::bind
** src/Sounds/fg_fx.cxx
- support multiple engine and cranking sounds
** src/Sounds/fg_fx.hxx
- support multiple engine and cranking sounds
to control logging
- /sim/logging/classes takes a value like "terrain|astro", where the
names are the macros from simgear/debug/debug_types.h with the
initial "SG_" removed and converted to lower case; for none, use
"none"
- /sim/logging/priority takes a single name like "warn", where the
name is a macro from simgear/debug/debug_types.h with the initial
"SG_" removed and converted to lower case
(the global temperature property returns that at the aircrafts altitude) and
adding "information" to the airport name to avoid having to store it
in the default.atis file 1200 odd times.
Heres an update to the ATIS stuff. In brief:
The possible buffer overflow in the display with wind should
hopefully be fixed.
Temperature is taken from the global temperature property instead
of being hardwired.
The display class now includes an implementation of the member
function to change the repeating message.
The message callsign is no longer hardwired. The first message
from each station is generated with a random callsign.
Subsequent messages from the same station have the callsign
incremented every hour. A map of airport-id vs. last callsign and
transmission time is kept for each station that has transmitted for
the duration of the FlightGear session. The logic might be flaky if
FlightGear is run for more than 24 hours at a stretch between
visiting the same ATIS station though! (ie I don't check the day.)
This map is kept in the atislist class. This might not be the best
long-term place for it (in an ATC class of some sort might be
better), but it works for now.
What was happening was that we screwed up and scheduled tiles for
(lon,lon) rather than (lon,lat) ... note the typo. This generated
bogus tile id's which the system happily accepted, put into the tile
cache system, and attempted to load. The problem was that these bogus
tile id's were negative where as all valid tile id's should be >= 0.
These negative tile id's up the logic used to remove tiles from the
cache. When identifying tiles for removal, we look for the furthest
tile away from us by starting out the furthest id at -1 and if we find
something further, we update the furthest tile id. Then at the end we
check if the furthest tile id >= 0 to see if we found anything we
could remove. However, the furthest tile id was these bogus tiles
with negative tile id's so the system always assumed there was nothing
appropriate for removal. This made it impossible to ever remove a
tile from the cache meaning it quickly filled up and no more tiles
could be loaded.
I fixed the one instance of scheduling tiles for a bogus location, and
added a sanity check so if it ever happens again we'll bomb with an
appropriate error message.
ends of the same runway share the same frequency. This is probably the best
we can do until we impliment some sort of operator interface to manually set
which end is active (like is done in real life.)
fix startup sequence problems where we initialize the FDM before we know
the desired starting altitude.
These changes delay fdm initialization until the local tile has been loaded
and we can do a real intersection and find the true ground elevation.
In order to do this, I depend more on the property manager as glue, rather
than the FGInterface.
There are some glitches still when switching to a new airport or reseting
the sim. I will work on addressing these, but I need to commit the changes
so far to keep in sync with other developers.
meaning of "win_ratio". I've removed win_ratio and added fov_ratio and
aspect_ratio, as it seems both are needed.
n.b. The multi-line changes in fgReshape comprise:
extracting common code,
removing an apparently arbitrary "+1" on the view height,
changing "set_win_ratio" to "set_aspect_ratio".
through the controls interface and the running and cranking flags through
the engine interface. This has no current effect on LaRCsim (other than
to make the code neater) but is necessary to add engine startup to JSBSim
which is now underway. I've also put in main.cxx which escaped getting
committed in the previous round of changes - adding this will add
the cranking sound to LaRCsim during engine startup.
one I sent yesterday. I have re-zipped all four files so you can
neglect the last lot but only io360.cxx has changed if you've
already committed. It's untested since I can't start the engine until
John has committed his update with separate properties. Should
work fine though.
- use guiErrorMessage
- added new properties /sim/view/pilot/x-offset-m,
/sim/view/pilot/y-offset-m, and /sim/view/pilot/z-offset-m to
control pilot-position offset from CG
but no entries qualify for removal. It will keep trying to schedule the
tile(s) until an entry frees up. Entries in the cache do not qualify for
removal if they are in the process of being loaded.
I've updated the WeatherDatabase to be able to use only the n closest
stations. This can speed up the initalization dramatically.
To take a benefit from that you need:
- http://129.13.102.67/out/flight/current.txt.gz in
FG_ROOT/weather/current.txt.gz
- --prop:/environment/weather/working-type=internet
- --prop:/environment/weather/max-stations=what_ever_you_want
The WeatherCM stuff now publishes its data in the property system.
/environment/weather/wind-north-mps
/environment/weather/wind-east-mps
/environment/weather/wind-up-mps
/environment/weather/temperature-K
/environment/weather/air-pressure-Pa
/environment/weather/vapor-pressure-Pa
/environment/weather/air-density
are the new properties.
have multiple ptrs to individual entries (aliases) but the destructor was
trying to delete every ptr so it would delete already freed memory for aliases.
I implimented a simple ref counting scheme (similar to the plib mechanism) to
track references to material lib entries and only "delete" them when the last
reference is removed.
that overrides in JSBSim will work (i.e. properties can be set)
- modified set_(u|v|w)Body to use set_Velocities_Wind_Body, so
that overrides in JSBSim will work (i.e. properties can be set)
can bind a single input to multiple properties)
Made the following properties archivable:
- /controls/aileron
- /controls/elevator
- /controls/elevator-trim
- /controls/rudder
- /controls/flaps
- /controls/throttle[*]
- /controls/mixture[*]
- /controls/propellor-pitch[*]
- /controls/brakes[*]
in init)
- free data structures in destructor
- ensure that interpolation tables are allocated before any searching
is done; otherwise, starting at some locations (such as CYYZ) causes
a segfault
node, and to modify that directly for scaling events: that will make
handling joystick axes much more efficient
- modified FGBinding to work with the new command state, so that
commands can save their state (i.e. compiled arguments) from the last
pass
- removed FGBinding::_fire implementation
- implemented FGBinding copy constructor
pointing to a non-existant material name. (This has been fixed.)
The alias code didn't check to see if this condition would occur so it
was putting a 'NULL' entry in the material library which was causing
the crash. It now checks for and skips bad aliases and prints a
warning message.
- moved shift-F3 (reload panel) bindings to XML
- moved shift-F4 (reload prefs) bindings to XML
- moved shift-F5, shift-F6, shift-F7, and shift-F8 (scroll panel) to
XML
- no longer includes Main/bfi.hxx
- added implementations of GLUTkey, GLUTkeyup, GLUTspecialkey, and
GLUTspecialkeyup
- include Input/input.hxx
- register GLUTkeyup and GLUTspecialkeyup with glut
- comment out call to fgJoystickRead
- comment out call to fgJoystickInit
- add call to FGInput::update to replace fgJoystickRead
this way, keyboard buttons can work the same way as joystick buttons
- added declaration for FGBinding::fire(double); this adds a setting
property to the arguments passed to the command, so that it can use
the current axis position as part of its calculations
- added data structures from joystick.cxx
- go back to using index as key code (otherwise, we'll get nasty
surprises when users try to override bindings)
- XML config file now nests bindings inside modifiers
- allow user to specify whether key is repeatable
- removed hard-coded bindings for 'b', ',', and '.'
- added code from joystick.cxx, with the following major changes:
- changed from js0, axis0, button0 to js[0], axis[0], button[0], etc.
- removed factor, offset, etc. since they will be args to command in
binding
- allow multiple bindings, as with key mappings
- allow access to keyboard modifier keys for bindings
- include infrastructure for modifiers (only FG_MOD_UP is used so far)
- removed unused 'saturation' property
- temporarily removed capture property and trim code; it will have to
be rewritten to be more generic
- allow modifiers for joystick buttons
want binding/property rather than binding/control
- removed hard-coded bindings for F3 (screenshot), Ctrl-S
(autothrottle), v (cycle view) and all of the keypad view-direction
keys; these are now defined in $FG_ROOT/keyboard.xml
- removed unused action method
a crash when relocating to a new airport. Pending work from the old
area is now just completed as normal, rather than trying to empty the various
queues in their various stages when can lead to many problems in a threaded
environment.
with different modifiers (the format of the key bindings has changed
again slightly, adding a <code>..</code> element; see keyboard.xml for
details).
2. Modified FGInput to try default modifiers for ctrl, shift, and alt
when the initial bindings fail (i.e. you don't have to specify
mod-shift explicitly for upper-case 'P' any more).
3. Fixed problems with properties and panel reloading reported by
Martin Dressler and John Check.
4. Updated preferences.xml to get rid of obsolete references to
/controls/brakes/left and /controls/brakes/right (as reported by John
Check).
There were also two non-bugs reported by John Check:
(a) Differential braking doesn't work (John was using the obsolete
properties from #4 above).
(b) Duplicates show up in the property tree using the telnet interface
(the property tree doesn't show indices, and John was seeing separate
entries for each possible engine, etc.).
Fixed a few glitches in the autopilot keys
Added a #define to be able to make a compile time decision to revert to
older GPS like autopiolt behavior this define SHOULD become a property
so that it is run time switchable.
(src/Input). So far, FGInput replaces most of src/Main/keyboard.cxx
(I've left a tiny stub); in the very near future, it will also take
over control of the joystick, mouse (Norm permitting), and panel
instrument interactions, so that there is a single mechanism for
configuring all input devices.
The new format should be (close to) self-explanatory by looking at the
new base-package file keyboard.xml, which is now included by
preferences.xml (I'll do the same thing for the joystick when I have a
chance). I have not managed to move all keybindings into this file
yet, but I've made a good start. I'm including Tony in the recipient
list so that he can see how bindings can use an external XML file.
This patch also adds support for multiple bindings for a single key,
special keys (i.e. keypad and function keys), and key modifiers
(shift/alt/ctrl); special keys use the PUI convention of adding 256 to
the Glut key code.
Unfortunately, everything comes with a price; in this case, I have not
yet found a general mechanism for the old (hard-coded) modal bindings,
which behaved differently depending on the autopilot state (i.e. left
rudder or move AP heading left); with my patches, this functionality
disappears, but you can still adjust the autopilot using the panel or
the GUI input dialogs.
to have attached an ssg loaded object to this branch, then plib will remove
it and all it's states (and textures) which will call opengl api commands
which will crash the program if run from a separate thread from the main render
thread.
- model loading deferred to primary thread
- tile removal deferred to paging thread
- other tweaks and rearrangments.
Airport signs
- first stab at some support for adding taxiway and runway signs. This
is non-optimal, but I'm under the gun for a demo.
a newly loaded tile to the scene graph. Instead it puts it in a queue
for the tile manager. I've used your counter_hack to check the loaded
queue and add any tiles to the scene graph. I was playing around with
the counter_hack so there might be some commented out code, etc. I also
changed some SG_DEBUGs to SG_INFOs so I could track the tile loading.
He writes:
Here are the final changes to add threads to the tile loading. All the
thread related code is in the new FGTileLoader class.
./configure.in
./acconfig.h
Added --with-threads option and corresponding ENABLE_THREADS
definition. The default is no threads.
./src/Scenery/tilemgr
Removed load_queue and associated references. This has been replaced by
a new class FGTileLoader in FGNewCache.
Made the global variable global_tile_cache a member.
schedule_needed(): removed global_tile_cache.exists() tests since
sched_tile() effectively repeats the test.
initialize_queue(): removed code that loads tiles since this is now
performed by FGTileLoader.
update(): ditto
./src/Scenery/newcache
Added new class FGTileLoader to manage tile queuing and loading.
tile_map typedefs are private.
exists() is a const member function.
fill_in(): deleted
load_tile(): added.
./src/Scenery/FGTileLoader
The new threaded tile loader. Maintains a queue of tiles waiting to be
loaded and an array of one or more threads to load the tiles. Currently
only a single thread is created. The queue is guarded by a mutex to
synchronize access. A condition variable signals the thread when the
queue is non-empty.
CLO: I made a few tweaks to address a couple issues, hopefully what we
have is solid, but now we kick it out to the general public to see. :-)
tile has been loaded. Since this flag can be set by another thread I've
declared it "volatile bool".
Also cleaned up delete vs delete[] usage. Gcc is happy with delete[],
which is the correct usage.
The files in the attached tarball make the following changes to
FlightGear:
- rename the existing FGInterface::init() method to
FGInterface::_setup to get it out of the way
- move *all* FDM initialization code out of src/Main/fg_init.cxx and
into FGInterface::init(), and clean up fg_init.cxx a little
(especially by removing the zillions of attempts to place the plane on
the ground at various locations in the code)
- modify FGInterface::bind() so that no values are picked up
automatically at bind time (they are set previously by init() instead)
- modify the init() methods of the classes derived from FGInterface
(i.e. larcsim, jsbsim, balloon, magic, and ada) to invoke
FGInterface::init() explicitly before doing their own setup
I don't claim that the code in FGInterface::init() is optimal (or even
correct), but it seems to work for on-ground starts with both LaRCSim
and JSBSim on runways pointing various directions from near sea level
to about 700' ASL (the range I happened to test). I expect that Jon
and Tony will want to look at the code and refactor and correct it now
that they can see what's going on in one place.
Here's a quick outline of what is invoked:
cur_fdm_state = new <whatever>(dt);
cur_fdm_state->init();
cur_fdm_state->bind();
The constructor allocates memory and sets default values only (with
the help of the FGInterface::_setup() method). The init() method pull
any required properties out of the property tree and sets up the
initial state of the FDM. The bind() method takes ownership of
FDM-related properties so that the FDM can publish them to the rest of
the sim.
Note that bind() and init() are virtual, so any implementation in a
subclass will hide the implementation in FGInterface; that's why
subclass implementations of init() and bind() have to invoke
FGInterface::init() and FGInterface::bind() explicitly, probably at
the start, so that they get the basic initialization.
hope, with earlier versions as well)
- support for the new LONG value type
- gear support for UIUC (updated for the newly renamed SG_* stuff;
otherwise identical to what I sent you before)
- fixed reported MSVC problem in src/FDM/flight.cxx
I have created a set of patches to provide configurable landing gear
for the UIUC models. The patches (including four new files) are
available at
http://megginson.com/private/fgfs/uiuc-20010309.tar.gz
A modified UIUC configuration file for the Twin Otter (DHC-6) is
available at
http://megginson.com/private/fgfs/aircraft.dat
It should be possible to configure appropriate gear for all of the
UIUC models now. As a bonus, the models also support braking, both
absolute and differential, as well as nose-wheel steering (all of
which are currently missing from the UIUC models) -- when you land,
you don't have to keep rolling off the end of the runway anymore, and
you don't have to bank to steer in a taxi.
My sample configuration file contains absolutely bizarre, wild
guesses, and many places that I didn't even bother to guess properly.
The only actual data I had was the wing-span of the DHC-6 (65ft),
which I used for positioning the wing tips. The wing-tips for this
model actually work now -- I hit the aileron hard while accelerating
for take-off, and the wingtip noticeably strikes the ground and
bounces up (quite dramatic in external view using the DHC-6 model from
Wolfram's site).
Details
-------
The UIUC models now support up to 16 gear points each where a gear
point is anything in the aircraft that can come in contact with the
ground, including the tail and wing-tips. I have added the following
new fields to the UIUC configuration files, where <index> is an
integer between 0 and 15, and <value> is a real number:
gear <index> Dx_gear <value> # x offset from CG [ft]
gear <index> Dy_gear <value> # y offset from CG [ft]
gear <index> Dz_gear <value> # z offset from CG [ft]
gear <index> cgear <value> # spring damping [lbs/ft/sec]
gear <index> kgear <value> # springiness [lbs/ft]
gear <index> muGear <value> # rolling coefficient
gear <index> strutLength <value> # gear travel [ft] (not yet used)
Most of these names were already pencilled into the UIUC documentation
(as TODO items), but I had to make up Dx_gear, Dy_gear, and Dz_gear --
if those are inappropriate, I'd appreciate suggestions for better
names.
It will be necessary to modify the other UIUC configuration files to
include some kind of gear support as well, or the planes will sink
nose-first into the ground down to their CG's (it's actually quite
funny to watch with an external view).
Background
----------
As I frequently remind everyone here, I have no math background worth
spitting at, so I will not even pretend to have done the hard stuff.
The UIUC code uses a copy of a very old version of the LaRCsim
c172_gear.c -- I wanted to update it with Tony Peden's excellent newer
version, which includes differential braking among other goodies (the
UIUC models don't support brakes, period).
I copied the newer code into uiuc_aero.c, and it compiled and ran, but
all of the planes ended up sitting on their tails with their noses in
the air. Since Tony made his gear code nicely parameterized, I
experimented with different values, and found that it wasn't too hard
to balance the Twin Otter by moving the gear back a bit. At first, I
used properties to set different values, but then I decided to
integrate the whole thing properly into the UIUC configuration
framework. Thanks to Tony Peden, who did the real modelling work -- I
can take credit only for two or three hours of integration. It turns
out that Tony's code is generalized enough to deal with a wide range
of different gear structures -- I suspect that it will even work for
the 747, when I get around to trying some values.
implicitly correcting for that yet. The plane now makes it to 11000ft on
autopilot *slowly*. I think I'll have to look at the prop parameters
next - altering the diameter and blade angle just slightly can have
quite an effect. If you want to play then try changing the values
prop_diameter and blade_angle in FGNewEngine::init. Keep blade
angle between 20 and 25 (since those are the only values for which
I've entered data and I interpolate between them) and ignore
FGProp1_Blade_Angle since that's an old variable that isn't used. I
really ought to read all the engine and prop parameters from file to
avoid recompilation when tweaking !
the actual air pressure and temperature from the LaRCSim model
instead of assuming that it is at sea level as before. This has
reduced the ceiling from over 60000 ft to about 9000 ft. This is a bit
low (should be around 13 - 14000 ft I think) but I still have some
stuff to do with the engine power correlation and its ignoring the
temperature at the moment so I'm not panicking yet :-)
I've also changed the mixture-power correlation to one from a
published paper since the curve from the IO360 manual seemed to
be a load of rubbish, and didn't have any numbers on the mixture
axis anyway.
I've also knocked the full rich mixture down a touch in line with
Riley Rainey's recommendation, and cleaned up the code a bit.
a) I was compairing feet vs. meter (making the range 3x too. big)
b) I was using the diameter in place of the radius (making the range an
additional 2x too big.)
c) Updated the equation for calculating range to model the weak transmitter
not being picked up at upper altitudes.
We still might need some additional tweaking, but I think we are starting to
get in the right ball park.
is 9 not 8.) Note that the initial altitude setting was placing us way below
the ground, but as it doesn't seem to have caused us problems, it's probably
redundant!
When you tune into a station start at a "random" point in the sequence.
Sped up the words per minute to 13 to which means one sequence per about 4 secs.
This means we get through the whole sequence in about 20 seconds leaving 10
seconds of silence.
joystick input, and then will ignore the actual position of that input
until the user places it in the proper position to match the trimmed position.
At that point the joystick input captures control over the value and the
value will match the joystick position from then on. This is primarily set
up so that the FDM can trim in an initial throttle position.
Added fuel-flow and total fuel to the LaRCSim model. Its still a bit
rough for now but it works, except the engine dosn't stop when fuel runs
out at the moment since there's no refuelling capability in the sim just
now. It takes about 4 gallons use before you see the fuel guages begin
to drop since there's 28 gal per tank but the guages go to 26.
DG heading bug initializes to a random setting.
Activating heading hold doesn't touch the DG heading bug any more.
Max autopilot decent rate is now -1000.
Basically I've rewritten the prop model along similar lines to how
Jon has done his - using published efficiency and coefficient of
power data. It works *much* better - try pulling the throttle back
to idle and putting the plane into a dive before and after updating
and you'll see what I mean. It doesn't require a fudge factor either
:-)
good as we can get" until we find a data source with actual VOR magnetic
offsets. We can use VOR offsets from some fixed date, but not all VOR's
were installed on the same day so no matter what date we pick we will be off on most of them.
restoreInitialState methods to FGGlobals, as well as the two-stage
commit described above for loading saved files. fgInit now takes a
snapshot of the initial state before handing off to the main loop, and
the GUI reInit function restores that state explicitly before calling
fgReInit.
The FlightGear patches also modify fg_props.hxx to add optional
useDefault arguments to all of the fgTie functions -- that lets you
choose whether you want to pick up any default value in the property
tree when you tie the property (the default is true).
FGOptions is history, and the modules are (starting) to use the property
manager directly. Let me know if I left any files out.
Inevitably, there will be some problems with broken options, etc.,
that I haven't found in my tests, but I'll try to fix them quickly.
We also need to stress that the property names currently in use are
not stable -- we need to reorganize them a bit for clarity.
FlightGear subsystems -- it isolates some of the config and #ifdef
stuff in a single place.
2. Added a new FGSubsystem interface, defined in fgfs.hxx; so far,
only FGControls implements it, but if that works, we can start letting
it propagate through the system and simplify the code in main.cxx and
fg_init.cxx (which is terrifyingly complex for anyone new to the
project).
3. Added new src/Main/fgfs_props.[hc]xx files with convenience
functions for tying properties under FlightGear.
4. Experimentally modified src/Controls/controls.cxx to tie properties
directly (rather than tying to BFI functions). I'd appreciate it if
you could get this into CVS as soon as possible, so we can see if the
template stuff causes trouble for any other platforms before I add
properties to the other subsystems.
5. Miscellaneous superficial modifications to other files.
In addition, I've made a couple of further changes:
6. Modified BFI to add support for setting the view axes (i.e. with a
joystick hat).
7. Cleaned up bfi.cxx and removed all cout statements.
====================================
Cockpit.cxx
-----------
Commented #ifdef FIGHTER_HUD.
Hud.cxx
-------
Included code to read the xml file and draw the corresponding instrument.
Hud.hxx, Hud_ladr.cxx, Hud_card.cxx and Hud_labl.cxx
---------------------------------------------------
Integrated code to draw any kind of hud.
Preference.xml
---------------
Included XML file path in the sim/hud property.
ReadMe.xmlhud
-------------
The Readme.xmlhud describes the reconfigurable HUD implemented thru XML
files.
Save/restore seems to be working now, thanks to a couple of
unspeakable kludges:
1. Every time the altitude changes, pause the flight simulator for
five frames and then change it a second time.
2. Every time the latitude or longitude changes, wait five frames,
then invoke fgUpdateSkyAndLightingParams() a second time.
structure. The new approach is simpler, more flexible, and more dynamics.
We can now dynamically size the tile cache up and down. Also, the range
of tiles to load is now dependent on visibility and is calculated to always
bring in enough tiles.
bring EGT down to a more reasonable range. EGT is now returned in
deg Fahrenheit (yuk!!) by the accessor function since that is what
the guage is calibrated in, and the absolute max value that can be
output (max power mixture at max power) is about 750 deg F. Dave, I
suggest that you set the guage to run from 450 - 750 deg F between
the four big marker ticks. What do the offset and scale actually
refer to in the .xml config file BTW?
Fuel flow, better handling of manifold pressure wrt engine speed, and
proper consideration of altitude effects next, hopefully.
- removed Toggle Clouds menu item
src/Main/options.cxx:
- (minor) added some code to sync up options with properties
src/Main/bfi.[ch]xx:
- removed (get|set)Clouds(ASL)?
- removed setSpeedNorth, setSpeedEast, and setSpeedDown -- these are
all read-only now
- added setAirspeed (for calibrated kt)
- extensive rewrite to support Tony's FDM changes
- rearranged everything in bfi.hxx to mess up Curt's ediff examination
- added properties for setting initial panel position
src/Main/save.cxx:
- reinit the tile cache after restore
temperature. The cylinder head is assumed to be at uniform
temperature. Obviously this is incorrect, but it simplifies things a
lot, and we're just looking for the behaviour of CHT to be correct.
Energy transfer to the cylinder head is assumed to be one third of the
energy released by combustion at all conditions. This is a reasonable
estimate, although obviously in real life it varies with different
conditions and possibly with CHT itself. I've split energy transfer
from the cylinder head into 2 terms - free convection - ie convection
to stationary air, and forced convection, ie convection into flowing
air. The basic free convection equation is: dqdt = -hAdT Since we
don't know A and are going to set h quite arbitarily anyway I've
knocked A out and just wrapped it up in h - the only real significance
is that the units of h will be different but that dosn't really matter
to us anyway. In addition, we have the problem that the prop model
I'm currently using dosn't model the backwash from the prop which will
add to the velocity of the cooling air when the prop is turning, so
I've added an extra term to try and cope with this.
In real life, forced convection equations are genarally empirically
derived, and are quite complicated and generally contain such things
as the Reynolds and Nusselt numbers to various powers. The best
course of action would probably to find an empirical correlation from
the literature for a similar situation and try and get it to fit well.
However, for now I am using my own made up very simple correlation
for the energy transfer from the cylinder head:
dqdt = -(h1.dT) -(h2.m_dot.dT) -(h3.rpm.dT)
where dT is the temperature different between the cylinder head and
the surrounding air, m_dot is the mass flow rate of cooling air
through an arbitary volume, rpm is the engine speed in rpm (this is
the backwash term), and h1, h2, h3 are co-efficients which we can play
with to attempt to get the CHT behaviour to match real life.
In order to change the values of CHT that the engine settles down at
at various conditions, have a play with h1, h2 and h3. In order to
change the rate of heating/cooling without affecting equilibrium
values alter the cylinder head mass, which is really quite arbitary.
Bear in mind that altering h1, h2 and h3 will also alter the rate of
heating or cooling as well as equilibrium values, but altering the
cylinder head mass will only alter the rate. It would I suppose be
better to read the values from file to avoid the necessity for
re-compilation every time I change them.
derive specific viewer classes from it. Here's what I currently have in mind:
FGViewer
|
|-> FGViewerPRH (current system with orientation specified in
| LaRCsim Euler angle convention)
|
|-> FGViewerLookAt Feed in a position, view direction, and up vector
|
|-> FGViewerHPR (similar to PRH, but using ssg hpr euler angle
| convention)
|-> others?
LaRCsim c172 on-ground and in-air starts, reset: all work
UIUC Cessna172 on-ground and in-air starts work as expected, reset
results in an aircraft that is upside down but does not crash FG. I
don't know what it was like before, so it may well be no change.
JSBSim c172 and X15 in-air starts work fine, resets now work (and are
trimmed), on-ground starts do not -- the c172 ends up on its back. I
suspect this is no worse than before.
I did not test:
Balloon (the weather code returns nan's for the atmosphere data --this
is in the weather module and apparently is a linux only bug)
ADA (don't know how)
MagicCarpet (needs work yet)
External (don't know how)
known to be broken:
LaRCsim c172 on-ground starts with a negative terrain altitude (this
happens at KPAO when the scenery is not present). The FDM inits to
about 50 feet AGL and the model falls to the ground. It does stay
upright, however, and seems to be fine once it settles out, FWIW.
To do:
--implement set_Model on the bus
--bring Christian's weather data into JSBSim
-- add default method to bus for updating things like the sin and cos of
latitude (for Balloon, MagicCarpet)
-- lots of cleanup
The files:
src/FDM/flight.cxx
src/FDM/flight.hxx
-- all data members now declared protected instead of private.
-- eliminated all but a small set of 'setters', no change to getters.
-- that small set is declared virtual, the default implementation
provided preserves the old behavior
-- all of the vector data members are now initialized.
-- added busdump() method -- FG_LOG's all the bus data when called,
useful for diagnostics.
src/FDM/ADA.cxx
-- bus data members now directly assigned to
src/FDM/Balloon.cxx
-- bus data members now directly assigned to
-- changed V_equiv_kts to V_calibrated_kts
src/FDM/JSBSim.cxx
src/FDM/JSBSim.hxx
-- bus data members now directly assigned to
-- implemented the FGInterface virtual setters with JSBSim specific
logic
-- changed the static FDMExec to a dynamic fdmex (needed so that the
JSBSim object can be deleted when a model change is called for)
-- implemented constructor and destructor, moved some of the logic
formerly in init() to constructor
-- added logic to bring up FGEngInterface objects and set the RPM and
throttle values.
src/FDM/LaRCsim.cxx
src/FDM/LaRCsim.hxx
-- bus data members now directly assigned to
-- implemented the FGInterface virtual setters with LaRCsim specific
logic, uses LaRCsimIC
-- implemented constructor and destructor, moved some of the logic
formerly in init() to constructor
-- moved default inertias to here from fg_init.cxx
-- eliminated the climb rate calculation. The equivalent, climb_rate =
-1*vdown, is now in copy_from_LaRCsim().
src/FDM/LaRCsimIC.cxx
src/FDM/LaRCsimIC.hxx
-- similar to FGInitialCondition, this class has all the logic needed to
turn data like Vc and Mach into the more fundamental quantities LaRCsim
needs to initialize.
-- put it in src/FDM since it is a class
src/FDM/MagicCarpet.cxx
-- bus data members now directly assigned to
src/FDM/Makefile.am
-- adds LaRCsimIC.hxx and cxx
src/FDM/JSBSim/FGAtmosphere.h
src/FDM/JSBSim/FGDefs.h
src/FDM/JSBSim/FGInitialCondition.cpp
src/FDM/JSBSim/FGInitialCondition.h
src/FDM/JSBSim/JSBSim.cpp
-- changes to accomodate the new bus
src/FDM/LaRCsim/atmos_62.h
src/FDM/LaRCsim/ls_geodesy.h
-- surrounded prototypes with #ifdef __cplusplus ... #endif , functions
here are needed in LaRCsimIC
src/FDM/LaRCsim/c172_main.c
src/FDM/LaRCsim/cherokee_aero.c
src/FDM/LaRCsim/ls_aux.c
src/FDM/LaRCsim/ls_constants.h
src/FDM/LaRCsim/ls_geodesy.c
src/FDM/LaRCsim/ls_geodesy.h
src/FDM/LaRCsim/ls_step.c
src/FDM/UIUCModel/uiuc_betaprobe.cpp
-- changed PI to LS_PI, eliminates preprocessor naming conflict with
weather module
src/FDM/LaRCsim/ls_interface.c
src/FDM/LaRCsim/ls_interface.h
-- added function ls_set_model_dt()
src/Main/bfi.cxx
-- eliminated calls that set the NED speeds to body components. They
are no longer needed and confuse the new bus.
src/Main/fg_init.cxx
-- eliminated calls that just brought the bus data up-to-date (e.g.
set_sin_cos_latitude). or set default values. The bus now handles the
defaults and updates itself when the setters are called (for LaRCsim and
JSBSim). A default method for doing this needs to be added to the bus.
-- added fgVelocityInit() to set the speed the user asked for. Both
JSBSim and LaRCsim can now be initialized using any of:
vc,mach, NED components, UVW components.
src/Main/main.cxx
--eliminated call to fgFDMSetGroundElevation, this data is now 'pulled'
onto the bus every update()
src/Main/options.cxx
src/Main/options.hxx
-- added enum to keep track of the speed requested by the user
-- eliminated calls to set NED velocity properties to body speeds, they
are no longer needed.
-- added options for the NED components.
src/Network/garmin.cxx
src/Network/nmea.cxx
--eliminated calls that just brought the bus data up-to-date (e.g.
set_sin_cos_latitude). The bus now updates itself when the setters are
called (for LaRCsim and JSBSim). A default method for doing this needs
to be added to the bus.
-- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no
longer exists ( get_V_equiv_kts still does, though)
src/WeatherCM/FGLocalWeatherDatabase.cpp
-- commented out the code to put the weather data on the bus, a
different scheme for this is needed.
ing features:
a) ADA Flight model - ADA.cxx, ADA.hxx, flight.hxx
b) Fighter a/c HUD - flight.hxx, hud.hxx, hud.cxx, cockpit.cxx, hud_ladr.c
xx, hud_card.cxx
c) 3-window display - options.hxx, options.cxx, viewer.cxx
d) Moving objects (ship) - main.cxx
e) Patches - main.cxx
ADA.cxx, ADA.hxx
--------------------------
Interface to the external ADA flight dynamics package.
flight.hxx
----------
Included prototypes for accepting additional data fron the External flight
model for fighter aircraft HUD
Hud.hxx
-------
Included prototypes for accepting additional data for fighter HUD from Exernal F
light model.
Defined FIGHTER_HUD pre-processor directive to enable compilation of fighter hud
code.
hud.cxx, cockpit.cxx, hud_ladr.cxx, hud_card.cxx
---------------------------------------
Included code to initialise additional reticles/text for fighter HUD which is co
nditionally
compiled if FIGHTER_HUD is defined.
options.hxx
-----------
Added window_offset, and function to retrieve its value for 3 windows
options.cxx
-----------
Changed few options to suit ADA/CEF projection system/screens and checks for win
dow offset.
views.cxx
---------
Added code to retrieve view offset for window.
Main.cxx
--------
Added code to load and move an aircraft carrier.
Patch to enable clouds from command line until Curtis fixes it. By default cloud
s are disabled.
with jsbsim since no engine is currently created. This will all have to be
revamped in the future, but jsbsim has the structure for doing engines so
that is good.
I have a scrollable panel working (it didn't take long in the end). A
panel can now be much wider or higher than the available area, and the
user can scroll around using [Shift]F5, [Shift]F6, [Shift]F7, and
[Shift]F8. The user can also scroll the panel down to get a bigger
external view. Mouse clicks seem still to be working correctly.
To set the panel's (virtual) height and width, use the panel file's /w
and /h properties in a panel XML file; to set the initial x- and y-
offsets (untested), use the panel file's /x-offset and /y-offset
properties; to set the initial height of the external view (untested
and optional), use the panel file's /view-height property. Note that
none of these show up in the regular FGFS property manager.
Unfortunately, these patches will not affect your initialization
problems with the property manager -- I'm having a hard time tracking
them down because I cannot reproduce them.
I have also made some patches to main.cxx and views.cxx to do two
things:
1. Expand or shrink the external view as the panel moves up and down.
2. Set the window ratio correctly, so that we don't get an oval sun
and flat clouds when the panel is visible (the problem before was
integer division, so I added casts).
Unfortunately, the window ratio is not set properly at start-up --
there are too many dependencies, and I haven't figured that part out
yet. As soon as you hide and redisplay the panel or move it
vertically (i.e. force fgReshape to be called), you'll see the correct
ratio.
- /engines/engine0/rpm changed to read-only
- /engines/engine0/egt added (read-only)
- /controls/mixture added
- /controls/propellor-pitch added (not used for C172)
BFI:
- getEGT() added
- getMixture() and setMixture() added
- getPropAdvance() and setPropAdvance() added (= pitch)
- cleaned up reinit function a bit
- force reinit only when values are actually changed; for example,
setting the flight model to the current flight model will not cause
a reinit
LaRCSim:
- hook up mixture and pitch to FGControls (they were hard-coded
before)
- /engines/engine0/rpm changed to read-only
- /engines/engine0/egt added (read-only)
- /controls/mixture added
- /controls/propellor-pitch added (not used for C172)
BFI:
- getEGT() added
- getMixture() and setMixture() added
- getPropAdvance() and setPropAdvance() added (= pitch)
- cleaned up reinit function a bit
- force reinit only when values are actually changed; for example,
setting the flight model to the current flight model will not cause
a reinit
LaRCSim:
- hook up mixture and pitch to FGControls (they were hard-coded
before)
and prop inertia and passed the timestep from LaRCsim in order to have
the engine rpm behaving according to the applied torque and the laws of
physics.
Added an initial freeze on startup so that we can try to avoid bouncing the
plane on it's back during the very low frame rate / scenery loading startup
conditions.
src/Cockpit/radiostack.cxx
- extended VOR ranges to make them slightly more usable (pending some
real radio code)
src/Cockpit/sp_panel.cxx
- fixed heading bug on gyro compass (sort-of -- the AP still doesn't
work quite as expected)
- skid ball moves the right direction
- moved whiskey compass more to the co-pilot's side, as suggested by
Alex a while back
src/Joystick/joystick.cxx
- included Norm's Windows patches
- renamed brake properties (see bfi.cxx, below)
src/Main/bfi.cxx
src/Main/bfi.hxx
- renamed getBrake and setBrake to getBrakes and setBrakes
- added getCenterBrake and setCenterBrake
- added getAPHeading (without mag correction, needed for the panel)
- renamed property /controls/brake to /controls/brakes/all
- renamed property /controls/left-brake to /controls/brakes/left (as
requested by Alex)
- renamed property /controls/right-brake to /controls/brakes/right (as
requested by Alex)
- added property /controls/brakes/center
- added property /autopilot/settings/heading
- fixed bug in setAltitude so that altitude will be property restored
from a save file
- fixed getBrakes to return the highest of the three brake settings
src/Main/save.cxx
- call FGBFI::getBrakes instead of FGBFI::getBrake
Cleaned a bit of cruft out of gui.[ch]xx
Cleaned up win_ratio() and fov code to make more sense and be a bit more
consistant and robust and less buggy and less susceptible to screw ups.
Panel is activated now by default, HUD is off by default.
from the pre-ssg / render everything ourselves days. Replaced with a
material library manager that is much better suited for working in the
context of ssg. This simplified and cleaned up a ton of old junk.
1. I've modified src/Time/fg_time.cxx so that the --start-date-gmt
option works correctly, at least on my system.
2. I've modified src/Main/bfi.cxx to return the correct time from
FGBFI::getTimeGMT(), so that saving and reloading now keeps the time set
correctly again.
3. I've modified src/Main/main.cxx so that the engine still makes a
noise when it's idling (it sounded very strange when the engine simply
turned off at idle then magically turned on again with a little
throttle).
I've done some substantial reengineering of the 2D panel: except for the
radios, the whole panel is built from a large table now. I'd be
grateful if you could add these changes to the main distribution.
Since I always like to provide some eye-candy with my updates, I've
fixed the ADF gauge to be more usable by slimming the needle and adding
markings every 45 deg (you'll need to use the attached textures).
This set of changes cleans up my previous ones quite a bit:
[tony@valkyrie FlightGear]$ tar -ztf tp_changes.tgz
src/Controls/controls.cxx
src/Controls/controls.hxx
src/FDM/JSBsim.cxx
src/Main/fg_init.cxx
src/Main/options.cxx
src/Main/options.hxx
src/Joystick/joystick.cxx
controls.[ch]xx: removed the trimmed_throttle stuff. This undoes the
changes I submitted last time.
JSBsim.cxx: updates for the removal of the trimmed_throttle stuff
fg_init.cxx: removed the autothrottle logic. The autothrottle is now
off
by default.
options.[ch]xx: Sets trim_mode to false by default. It is enabled only
when --notrim is not used and JSBsim is the FDM.
joystick.cxx: Added logic for syncing the throttle lever. This is
only enabled when trim_mode is enabled. The way I
did it is, I hope, a good way of going about it.
I tested:
fgfs --fdm=larcsim
fgfs --fdm=jsb --aircraft=c172 --vc=100 --altitude=500
fgfs --notrim --fdm=jsb --aircraft=c172 --vc=100 --altitude=500
All work as intended, at least for me.
Make sure your joystick is calibrated and give:
fgfs --fdm=jsb --aircraft=c172 --vc=100 --altitude=500
a try, I think you just might be impressed.
I am. ;-)
Tony submitted:
JSBsim:
Added trimming routine, it is longitudinal & in-air only at this point
Added support for taking wind & weather data from external source
Added support for flaps.
Added independently settable pitch trim
Added alphamin and max to config file, stall modeling and warning to
follow
c172.cfg:
Flaps!
Adjusted Cmo, model should be speed stable now
FG:
Hooked up Christian's weather code, should be using it soon.
Hooked up the trimming routine. Note that the X-15 will not trim.
This is not a model or trimming routine deficiency, just the
nature of the X-15
The trimming routine sets the pitch trim and and throttle at startup.
The throttle is set using Norman's code for the autothrottle so the
autothrottle is on by default. --notrim will turn it off.
Added --vc, --mach, and --notrim switches
(vc is airspeed in knots)
uBody, vBody, and wBody are still supported, last one entered
on the command line counts, i.e. you can set vc or mach or u,v,
and w but any combination will be ignored.
- the panel uses much, much less texture memory, and draws much
faster, at least on my hardware
- there is a wet (magnetic) compass at the top of the panel
- the gyro compass shows true heading again, but don't get used to it:
we're going to set it up to drift soon
- there are TO/FROM flags on NAV1 and NAV2 (but no GS flag yet)
- the ADF looks a little more realistic (if you can forgive the ugly
needle)
- when the HUD is not open, the framerate is moved to the right side
of the screen so that it won't be obscured by the mag compass
- knobs now continue to rotate when you hold down the mouse
- the middle mouse button makes knobs rotate much faster
- there are NAV1, NAV2, and ADF radios that can be tuned using the mouse
- there are standby frequencies for NAV1 and NAV2, and buttons to swap
- there is a crude, rather silly-looking DME, hard-wired to NAV1
- there is a crude, rather silly-looking autopilot that can lock
the heading (to the bug on the gyro), can lock to NAV1, and can lock
the current altitude
- the knobs for changing the radials on NAV1 and NAV2 look much better
and are in the right place
- tuning into an ILS frequency doesn't change the displayed radial for
NAV1
Code
- I've created a new module, sp_panel.[ch]xx, that constructs the
default single-prop panel; this works entirely outside of FGPanel,
so it is possible to construct similar modules for other sorts of
panels; all code specific to the default panel has been removed from
panel.cxx
- current_panel is now a pointer
- radiostack.[ch]xx keeps track both of the actual radial and of the
selected radial (they will differ with ILS); the NAV gauges should
not spin around automatically to show the actual radial (we need to
do something similar with the autopilot)
- the panel is initialized fairly early
- make sure that standby frequencies also get initialized
- I've started combining and clipping small textures to save texture
memory; there's a lot more to do, but at least I've made a start
it's now possible to choose the LaRCsim model at runtime, as in
fgfs --aircraft=c172
or
fgfs --aircraft=uiuc --aircraft-dir=Aircraft-uiuc/Boeing747
I did this so that I could play with the UIUC stuff without losing
Tony's C172 with its flaps, etc. I did my best to respect the design
of the LaRCsim code by staying in C, making only minimal changes, and
not introducing any dependencies on the rest of FlightGear. The
modified files are attached.
the NAV face, and one for a NAV needle (just a thin, slightly blurry red
line for now). I'm attaching my two new textures, together with my newest
panel.cxx (modified from Alex's to use the new textures). Obviously,
there's a lot more to do, including TO/FROM indicators, but this is a
start, and it's fun.
NAV2 is now the VOR radial 068 from MZB,
ADF is now the Compass locator on the outer marker.
This combination is more than the legally required to
fly any of KMYF-ILS-28R, KMYF-LOC-28R KMYF-NDB28.
If you don't have access to the approach plates
and would like them, let me know and I'll scan them
(and put them on the webpage area).
The approaches do work; I've checked them all out in
terms of altitude profile, centerlines and other stuff.
In real life, the radar vectoring will basically abandon you
overhead KSEE airport at 4000 ft heading 210 or so. Sometime
later you'll be turned to a heading of 260 if the controller
doesn't have too much else to do, just before you hit the
extended centerline. You can't rely on that though.
Maintain 3500ft until established, 2100 ft until the outer marker,
If non-precision, maintain 1340 until crossing the radial,
then 900 thereafter until you miss, based on time from the NDB.
The miss takes you heading 270 to intercept a radial which this
hacky implementation will not let you set up the computer for.
The hacky math implementation does not take range and/or signal
strength into account, so you can fly to San Diego from England
by following the needle indication on the ADF. It is also
fairly inaccurate math; about as accurate as the real-life signals.
When we have a _real_ radio module, I will be very happy to
throw all that code away. For now, it makes it demonstratable.
Please notice the nastiness involving the "VARY_E" constant.
This is _not_ something that will go away with the radio module.
As far as I know, we don't have a routine that calculates
magnetic variation as a function of global position.
We will need one, probably within the next two months.
Externally: added a chronometer and a control-position indicator a la
MSFS, along with dummies for the radio-nav gauges.
Internally, substantially reworked the code so that the individual gauges
can be table- (and eventually, file-) driven.
old routines from SRGP. Steve's plib/sg.h does a nice job of completely
replacing this (and since plib is already around) and is a nice clean design
so it just makes sense.
above terrain check so when the view position and the aircraft model collided
the current altitude kept getting pushed up to compensate, but of course the
aircraft model would get pushed up as well because it tracks the current
aircraft position and orientation. Thus you had a never ending cycle ...
much less so due to returning the aero reference point stuff to the config
files. Don't know what happened there ...
Additionally, I have added a new field to the config file: CFG_VERSION. A
version number, currently 1.1, is assigned to the config file and a matching
definition is found in FGDefs.h. The two need to match. Tony has also added
code into FGAircraft.cpp to handle if aero reference point is not specified.
I've reorganized the code in panel.cxx and panel.hxx so that it will
be a little easier to extend the panel later if someone wants to.
It's still basically Friedemann's code at the core, but I've
repackaged it into a saner class hierarchy and encapsulated as much as
I could (there are still a couple of circular dependencies that need
swatting). If someone wants to modify it to use SSG or to add new
gauges, it should be a lot easier now.
There are no user-visible changes.
Dave Eberly's spherical interpolation code (found in the Lib/Math
directory). So it would be great if you could give him also a place
in the thanks file. Changing the WeatherDatabse made actually a heavy
internal redesign necessary but no code outside the database is
affected (isn't code hiding great?).
Added Simulator/Clouds/
Durk fixed a problem in gui.cxx with cursor type.
Durk updated his time zone / time-offset command line parameters
Curt added a cheezy fade in/out as we transition through the cloud layer.
We really need to fog the sky dome, sun, moon, stars as well.
Curt added --enable/disable-clouds and --clouds-asl= to control clouds.
Joystick auto-coordination tweaks.
Additional debuging output when pausing and resuming the sim.
Window resizing tweaks by David Megginson (and Norman Vine).
options.cxx: reorder option initializations to match declaration order.
views.cxx: much cleanup of stuff that was depricated by the move to ssg.
I now use ssg to do all the projection/modelview matrix calculation
and setup. (mostly)
vies.hxx: also added the view pan offset to the view matrix calcs.
Better handling of missing tiles.
Added a range selector so we can completely ignore tiles that are beyond
our visibility range.
Added a routine to prep the ssg nodes before rendering by updating the
transform and range selector values.
