there was the situation where four directories contained jst two files,
of which three directories were aircraft related, and one directory contained
test code from Curt that might be better of in SimGear anyhow.
This is just a patch to move a bunch of files to new locations. In case of
local changes to any of them you can do the following:
move replay.[ch]xx from src/Replay to src/Aircraft
move control.[ch]xx from src/Control to src/Aircraft
move ssgEntityArray.[ch]xx from src/Objects to simgear/screen
In addition it has been decided only to use .[ch]xx files in all directories
unless it's contained within an FDM specific directory, in which case the
author is free to do whatever (s)he wants.
In this repspect the following files have been renamed in src/Multiplayer:
tiny_xdr.[ch]pp has become tiny_xdr.[ch]xx
multiplaymgr.[ch]pp has become multiplaymgr.[ch]xx
CygWin/gcc-3.4.4 updates.
I replaced my cygwin compiler with 3.4.4, did a make clean of plib, simgear,
and flightgear, then did a make install of all three. With the included changes,
everything builds fine, and runs fine.
I believe I have found the agl hud problems as well as the 'hole' in the
carrier's deck. I spent half the day to reproduce that problem, it did not
occure when you start on the carrier not does it occure with JSBSim and my
really often used testaircraft. So I really need to improove my helicopter
flying qualities.
I was under the impression that *all* FDM's call
FGInterface::updateGeo*Position(..)
so set the new position in the FDM interface. Therefore I had added at the
some code that updates the scenery elevation below the aircraft to *those*
functions.
Ok, not all FDM's do so :/
The attached patch factors out a function computing the scenery altitude at
the current FDM's position. This function is also used in those FDM's which
need to update this value themselves.
Also this patch restores the nearplane setting and uses the current views
altitude instead of the current aircrafts. I think that this should further
be changed to the eypoint's agl in the future.
The agl is again ok in YASim's hud.
controls in the cockpit vs. which wheels they apply to. FlightGear now
sets /controls/gear/brake-left, /controls/gear/brake-right, and
/controls/gear/brake-parking. It should be up to the FDM to sort out
which wheels under which circumstances are affected by these controls
and ultimately what happens to the physical motion of the aircraft.
- changed FGSubsystem::update(int) to
FGSubsystem::update(delta_time_sec); the argument is now delta time
in seconds rather than milliseconds
- added FGSubsystem::suspend(), FGSubsystem::suspend(bool),
FGSubsystem::resume(), and FGSubsystem::is_suspended(), all with
default implementations; is_suspended takes account of the master
freeze as well as the subsystem's individual suspended state
- the FDMs now use the delta time argument the same as the rest of
FlightGear; formerly, main.cxx made a special case and passed a
multiloop argument
- FDMs now calculate multiloop internally instead of relying on
main.cxx
There are probably some problems -- I've done basic testing with the
major FDMs and subsystems, but we'll probably need a few weeks to
sniff out bugs.
It's cumbersome to use the MagicCarpet as 3D cursor, because everytime
you shoot over the target you have first to turn by 180 degrees and to
fly back.
This patch lets the magic carpet fly backwards if brake[0] is active,
which is by default associated with the joystick's fire button.
(i.e. multiloop). Most subsystems currently ignore the parameter, but
eventually, it will allow all subsystems to update by time rather than
by framerate.
The files in the attached tarball make the following changes to
FlightGear:
- rename the existing FGInterface::init() method to
FGInterface::_setup to get it out of the way
- move *all* FDM initialization code out of src/Main/fg_init.cxx and
into FGInterface::init(), and clean up fg_init.cxx a little
(especially by removing the zillions of attempts to place the plane on
the ground at various locations in the code)
- modify FGInterface::bind() so that no values are picked up
automatically at bind time (they are set previously by init() instead)
- modify the init() methods of the classes derived from FGInterface
(i.e. larcsim, jsbsim, balloon, magic, and ada) to invoke
FGInterface::init() explicitly before doing their own setup
I don't claim that the code in FGInterface::init() is optimal (or even
correct), but it seems to work for on-ground starts with both LaRCSim
and JSBSim on runways pointing various directions from near sea level
to about 700' ASL (the range I happened to test). I expect that Jon
and Tony will want to look at the code and refactor and correct it now
that they can see what's going on in one place.
Here's a quick outline of what is invoked:
cur_fdm_state = new <whatever>(dt);
cur_fdm_state->init();
cur_fdm_state->bind();
The constructor allocates memory and sets default values only (with
the help of the FGInterface::_setup() method). The init() method pull
any required properties out of the property tree and sets up the
initial state of the FDM. The bind() method takes ownership of
FDM-related properties so that the FDM can publish them to the rest of
the sim.
Note that bind() and init() are virtual, so any implementation in a
subclass will hide the implementation in FGInterface; that's why
subclass implementations of init() and bind() have to invoke
FGInterface::init() and FGInterface::bind() explicitly, probably at
the start, so that they get the basic initialization.
FGOptions is history, and the modules are (starting) to use the property
manager directly. Let me know if I left any files out.
Inevitably, there will be some problems with broken options, etc.,
that I haven't found in my tests, but I'll try to fix them quickly.
We also need to stress that the property names currently in use are
not stable -- we need to reorganize them a bit for clarity.
LaRCsim c172 on-ground and in-air starts, reset: all work
UIUC Cessna172 on-ground and in-air starts work as expected, reset
results in an aircraft that is upside down but does not crash FG. I
don't know what it was like before, so it may well be no change.
JSBSim c172 and X15 in-air starts work fine, resets now work (and are
trimmed), on-ground starts do not -- the c172 ends up on its back. I
suspect this is no worse than before.
I did not test:
Balloon (the weather code returns nan's for the atmosphere data --this
is in the weather module and apparently is a linux only bug)
ADA (don't know how)
MagicCarpet (needs work yet)
External (don't know how)
known to be broken:
LaRCsim c172 on-ground starts with a negative terrain altitude (this
happens at KPAO when the scenery is not present). The FDM inits to
about 50 feet AGL and the model falls to the ground. It does stay
upright, however, and seems to be fine once it settles out, FWIW.
To do:
--implement set_Model on the bus
--bring Christian's weather data into JSBSim
-- add default method to bus for updating things like the sin and cos of
latitude (for Balloon, MagicCarpet)
-- lots of cleanup
The files:
src/FDM/flight.cxx
src/FDM/flight.hxx
-- all data members now declared protected instead of private.
-- eliminated all but a small set of 'setters', no change to getters.
-- that small set is declared virtual, the default implementation
provided preserves the old behavior
-- all of the vector data members are now initialized.
-- added busdump() method -- FG_LOG's all the bus data when called,
useful for diagnostics.
src/FDM/ADA.cxx
-- bus data members now directly assigned to
src/FDM/Balloon.cxx
-- bus data members now directly assigned to
-- changed V_equiv_kts to V_calibrated_kts
src/FDM/JSBSim.cxx
src/FDM/JSBSim.hxx
-- bus data members now directly assigned to
-- implemented the FGInterface virtual setters with JSBSim specific
logic
-- changed the static FDMExec to a dynamic fdmex (needed so that the
JSBSim object can be deleted when a model change is called for)
-- implemented constructor and destructor, moved some of the logic
formerly in init() to constructor
-- added logic to bring up FGEngInterface objects and set the RPM and
throttle values.
src/FDM/LaRCsim.cxx
src/FDM/LaRCsim.hxx
-- bus data members now directly assigned to
-- implemented the FGInterface virtual setters with LaRCsim specific
logic, uses LaRCsimIC
-- implemented constructor and destructor, moved some of the logic
formerly in init() to constructor
-- moved default inertias to here from fg_init.cxx
-- eliminated the climb rate calculation. The equivalent, climb_rate =
-1*vdown, is now in copy_from_LaRCsim().
src/FDM/LaRCsimIC.cxx
src/FDM/LaRCsimIC.hxx
-- similar to FGInitialCondition, this class has all the logic needed to
turn data like Vc and Mach into the more fundamental quantities LaRCsim
needs to initialize.
-- put it in src/FDM since it is a class
src/FDM/MagicCarpet.cxx
-- bus data members now directly assigned to
src/FDM/Makefile.am
-- adds LaRCsimIC.hxx and cxx
src/FDM/JSBSim/FGAtmosphere.h
src/FDM/JSBSim/FGDefs.h
src/FDM/JSBSim/FGInitialCondition.cpp
src/FDM/JSBSim/FGInitialCondition.h
src/FDM/JSBSim/JSBSim.cpp
-- changes to accomodate the new bus
src/FDM/LaRCsim/atmos_62.h
src/FDM/LaRCsim/ls_geodesy.h
-- surrounded prototypes with #ifdef __cplusplus ... #endif , functions
here are needed in LaRCsimIC
src/FDM/LaRCsim/c172_main.c
src/FDM/LaRCsim/cherokee_aero.c
src/FDM/LaRCsim/ls_aux.c
src/FDM/LaRCsim/ls_constants.h
src/FDM/LaRCsim/ls_geodesy.c
src/FDM/LaRCsim/ls_geodesy.h
src/FDM/LaRCsim/ls_step.c
src/FDM/UIUCModel/uiuc_betaprobe.cpp
-- changed PI to LS_PI, eliminates preprocessor naming conflict with
weather module
src/FDM/LaRCsim/ls_interface.c
src/FDM/LaRCsim/ls_interface.h
-- added function ls_set_model_dt()
src/Main/bfi.cxx
-- eliminated calls that set the NED speeds to body components. They
are no longer needed and confuse the new bus.
src/Main/fg_init.cxx
-- eliminated calls that just brought the bus data up-to-date (e.g.
set_sin_cos_latitude). or set default values. The bus now handles the
defaults and updates itself when the setters are called (for LaRCsim and
JSBSim). A default method for doing this needs to be added to the bus.
-- added fgVelocityInit() to set the speed the user asked for. Both
JSBSim and LaRCsim can now be initialized using any of:
vc,mach, NED components, UVW components.
src/Main/main.cxx
--eliminated call to fgFDMSetGroundElevation, this data is now 'pulled'
onto the bus every update()
src/Main/options.cxx
src/Main/options.hxx
-- added enum to keep track of the speed requested by the user
-- eliminated calls to set NED velocity properties to body speeds, they
are no longer needed.
-- added options for the NED components.
src/Network/garmin.cxx
src/Network/nmea.cxx
--eliminated calls that just brought the bus data up-to-date (e.g.
set_sin_cos_latitude). The bus now updates itself when the setters are
called (for LaRCsim and JSBSim). A default method for doing this needs
to be added to the bus.
-- changed set_V_equiv_kts to set_V_calibrated_kts. set_V_equiv_kts no
longer exists ( get_V_equiv_kts still does, though)
src/WeatherCM/FGLocalWeatherDatabase.cpp
-- commented out the code to put the weather data on the bus, a
different scheme for this is needed.
