That's a little too small to resolve differences at 16bpp. Try the
patch below. It decreases the lifting substantially. You will see
a slight increase in z-buffer flickering but it isn't bad. Note
that we removed the "distance" component the other day, the purpose
of it was to lift the lights higher when viewed at shallow viewing
angles. The distance component is critical for the street lights that
can be very long distances away.
But with the distances we're working with here it really doesn't
do all that much. The factor used in this patch is about as shallow
a lift as can be used when looking straight down at the airport. At
24bpp there's no effect from incorporating a distance component.
The choice is to reintroduce a distance component...one that works (and
only for 16bpp), or alter the factor used in the patch below to strike an
acceptable balance between different viewing angles when in 16bpp mode.
The biggest and coolest patch adds mouse sensitivity to the 3D
cockpits, so we can finally work the radios. This ended up requiring
significant modifications outside of the 3D cockpit code. Stuff folks
will want to look at:
+ The list of all "3D" cockpits is stored statically in the
panelnode.cxx file. This is clumsy, and won't migrate well to a
multiple-aircraft feature. Really, there should be a per-model list
of 3D panels, but I couldn't find a clean place to put this. The
only handle you get back after parsing a model is a generic ssg
node, to which I obviously can't add panel-specific methods.
+ The aircraft model is parsed *very* early in the initialization
order. Earlier, in fact, than the static list of allowable command
bindings is built in fgInitCommands(). This is bad, as it means
that mouse bindings on the instruments can't work yet. I moved the
call to fgInitCommands, but someone should look carefully to see
that I picked the right place. There's a lot of initialization
code, and I got a little lost in there... :)
+ I added yet another "update" hook to the fgRenderFrame routine to
hook the updates for the 3D panels. This is only required for
"mouse press delay", and it's a fairly clumsy mechanism based on
frame rate instead of real time. There appears to be delay handling
already in place in the Input stuff, and there's a discussion going
on about different mouse behavior right now. Maybe this is a good
time to unify these two (now three) approaches?
parts of the tree left over at the end which the failsafe was catching, but
this could impose a huge framerate hit if the missed portion of the tree
was large enough (and it very often was.)
a tile boundary. (Potentially imposes a slight performance penalty, but
getting the correct answer needs to be higher priority than getting the
wrong answer really quickly.)
are now working. A runway light is defined by a point and a direction. The
point and direction are combined with the local up vector to create a small
triangle orthogonal to the direction. The two ficticous corners of the
triangle are given an alpha value of zero, the orignal corner is given an
alpha of one. The triangle is drawn in glPolygonMode(GL_FRONT, GL_POINT)
mode which means only the corner points are drawn, and since two have alpha=0
only the original point is drawn. This is a long way to go to draw a point,
but it ensures that the point is only visible within 90 degrees of the light
direction, behind the light it is not visible. This is still a long way
to get to drawing a point, but we use an environement map, with the direction
vector as the normal to mimic a light that is brightest when viewed head
on and dimmest when viewed perpendicularly or disappears when viewed from
behind.
- warning, there is a bug in how the current runway light direction vector
is calculated which will adversely effect runway lighting. The airports
should be regenerated in order to fix this problem.
fgLoad3DModel() throws an exception if it fails to load the requested model.
This causes FGTileMgr::update(...) to exit. So I've added a try/catch block
to catch the exception and display an error message instead.
- Removed some old cruft.
- Removed some support for older versions of automake which technically was
correct, but caused the newer automakes to squawk warnings during an
initial sanity check (which isn't done very intelligently.)
NOTE: this fix is technically not correct for older version of automake.
These older version use the variable "INCLUDES" internally and could have
them already set to an important value. That is why we were appending
our values to them. However, newer versions of automake don't set this
value themselves so it is an error to append to a non-existant variable.
We seem to "get away" with overwriting the value on older versions of
automake, but if you have problems, consider upgrading to at least
automake-1.5.
* Finally I think I have the partial ssg tree deletion routine working correctly
after I managed to break it (and other confusion in the code cause it to
never be called so I didn't notice the problem.)
* Converted several SG_INFO statements to SG_DEBUG to clean up some
extraneous console output.
* This *should* conclude my investigation into a massive memory leak. :-)
Animations are now contained within the scene graph itself and are
updated whenever the graph is traversed -- that saves time by not
updating animations not currently in sight, and it allows animations
to be used for static objects and random objects as well.
Added new FGModelLoader and FGTextureLoader classes. These are intern
tables for models, to guarantee (mostly) that no model is loaded more
than once. FGTextureLoader is not yet used anywhere, but
FGModelLoader is now in place everywhere that ssgLoad* used to be
used (thus adding the ability to use animations).
In the future, FGModelLoader will add some interesting functionality,
including the ability to reload 3D models on the fly.
the tile cache it's ssg elements are disconnected from the main ssg scene
graph, and then the tile is thrown on the end of a delete queue. The
tilemgr->update() routine runs every frame. It looks at this queue and if
it is non-empty, it incrementally frees the compents of the first tile
on the queue. When the tile is completely free it is removed from the queue.
The amount of time to free the memory for even a single tile can be quite
substantial, especially with the increased overhead of dynamic/random
ground objects. This change allows the system to spread the work of freeing
tile memory out over many frames so you don't get a noticable single frame
hit or stutter.
This is a small fix for what turned out to be a major bug. Ground elevation
was calculated incorrectly when distant from one of the view locations. This
resulted in several problems including bizarre gear trimming, mid air
"crashes" (as in thinking we hit the ground) and so on when close to or on the
ground.
Unfortunately it does require a second ssg traversal when in tower view
(only), but the increased load isn't all that noticable. For the time being
this really is the best solution. In a future update I will be eliminating
the unecessary per frame traversals for the static views (without having to
maintain multiple ssgRoots).
When we go to multiple FDM instances we will perhaps need to put the ssg
traversal and ground elevation queries for the FDMs into an event timer that
updates the FDMs ground elevation in a round robin fashion (maybe every 1/n
seconds where n is the number of FDM instances running).
This is a new improved patch for the previous tile manager fixes.
Rather than building dependencies between FGlocation or the viewer or fdm with
tilemgr what I ended up doing was linking the pieces together in the Mainloop
in main.cxx. You'll see what I mean...it's been commented fairly well. More
than likely we should move that chunk somewhere...just not sure where yet.
The changes seem clean now. As I get more ideas there could be some further
improvement in organizing the update in tilemgr. You'll note that I left an
override in there for the tilemgr::update() function to preserve earlier
functionality if someone needs it (e.g. usage independent of an fdm or
viewer), not to mention there are a few places in flightgear that call it
directly that have not been changed to the new interface (and may not need to be).
The code has been optimized to avoid duplicate traversals and seems to run
generally quite well. Note that there can be a short delay reloading tiles
that have been dropped from static views. We could call the tile scheduler on
a view switch, but it's not a big deal and at the moment I'd like to get this
in so people can try it and comment on it as it is.
Everything has been resycned with CVS tonight and I've included the
description submitted earlier (below).
Best,
Jim
Changes synced with CVS approx 20:30EDT 2002-05-09 (after this evenings updates).
Files:
http://www.spiderbark.com/fgfs/viewer-update-20020516.tar.gz
or
http://www.spiderbark.com/fgfs/viewer-update-20020516.diffs.gz
Description:
In a nutshell, these patches begin to take what was one value for ground
elevation and calculate ground elevation values seperately for the FDM and the
viewer (eye position). Several outstanding view related bugs have been fixed.
With the introduction of the new viewer code a lot of that Flight Gear code
broke related to use of a global variable called "scenery.cur_elev".
Therefore the ground_elevation and other associated items (like the current
tile bucket) is maintained per FDM instance and per View. Each of these has a
"point" or location that can be identified. See changes to FGLocation class
and main.cxx.
Most of the problems related to the new viewer in terms of sky, ground and
runway lights, and tower views are fixed.
There are four minor problems remaining. 1) The sun/moon spins when you pan
the "lookat" tower view only (view #3). 2) Under stress (esp. magic carpet
full speed with max visibility), there is a memory leak in the tile caching
that was not introduced with these changes. 3) I have not tested these
changes or made corrections to the ADA or External FDM interfaces. 4) The
change view function doesn't call the time/light update (not a problem unless
a tower is very far away).
Details:
FDM/flight.cxx, flight.hxx - FGInterface ties to FGAircraftModel so that it's
location data can be accessed for runway (ground elevation under aircraft)
elevation.
FDM/larsim.cxx, larcsim.hxx - gets runway elevation from FGInterface now.
Commented out function that is causing a namespace conflict, hasn't been
called with recent code anyway.
FDM/JSBSim/JSBSim.cxx, YASim/YASim.cxx - gets runway elevation from
FGInterface now.
Scenery/newcache.cxx, newcache.hxx - changed caching scheme to time based
(oldest tiles discard).
Scenery/tileentry.cxx, tileentry.hxx - added place to record time, changed
rendering to reference viewer altitude in order to fix a problem with ground
and runway lights.
Scenery/tilemgr.cxx, tilemgr.hxx - Modified update() to accept values for
multiple locations. Refresh function added in order to periodically make
the tiles current for a non-moving view (like a tower).
Main/fg_init.cxx - register event for making tiles current in a non-moving
view (like a tower).
Main/location.hxx - added support for current ground elevation data.
Main/main.cxx - added second tilemgr call for fdm, fixed places where viewer
position data was required for correct sky rendering.
Main/options.cxx - fixed segfault reported by Curtis when using --view-offset
command line parameter.
Main/viewer.cxx, viewer.hxx - removed fudging of view position. Fixed numerous
bugs that were causing eye and target values to get mixed up.
- changed FGSubsystem::update(int) to
FGSubsystem::update(delta_time_sec); the argument is now delta time
in seconds rather than milliseconds
- added FGSubsystem::suspend(), FGSubsystem::suspend(bool),
FGSubsystem::resume(), and FGSubsystem::is_suspended(), all with
default implementations; is_suspended takes account of the master
freeze as well as the subsystem's individual suspended state
- the FDMs now use the delta time argument the same as the rest of
FlightGear; formerly, main.cxx made a special case and passed a
multiloop argument
- FDMs now calculate multiloop internally instead of relying on
main.cxx
There are probably some problems -- I've done basic testing with the
major FDMs and subsystems, but we'll probably need a few weeks to
sniff out bugs.
graph as the terrain, except for internal cockpit view. The SSG
scene-graph variables (except for the lighting root -- I'll get that
later) are now held in globals.hxx.
FGModelMgr::draw() is obsolete; I'll remove it in a future revision.
Description:
This update includes the new viewer interface as proposed by David M. and
a first pass at cleaning up the viewer/view manager code by Jim W.
Note that I have dropped Main/viewer_lookat.?xx and Main/viewer_rph.?xx and
modified the Makefile.am accordingly.
Detail of work:
Overall:
The code reads a little easier. There are still some unnecessary bits in
there and I'd like to supplement the comments in the viewer.hxx with a tiny
bit on each interface group and what the groupings mean (similar but briefer
than what you emailed me the other day). I tried not to mess up the style,
but there is an occasional inconsistency. In general I wouldn't call it done
(especially since there's no tower yet! :)), but I'd like to get this out
there so others can comment, and test.
In Viewer:
The interface as you suggested has been implemented. Basically everything
seems to work as it did visually. There is no difference that I can see in
performance, although some things might be a tiny bit faster.
I've merged the lookat and rph (pilot view) code into the recalc for the
viewer. There is still some redundancy between the two, but a lot has been
removed. In some cases I've taken some code that we'd likely want to inline
anyway and left it in there in duplicate. You'll see that the code for both
looks a little cleaner. I need to take a closer look at the rotations in
particular. I've cleaned up a little there, but I suspect more can be done
to streamline this.
The external declaration to the Quat_mat in mouse.cxx has been removed. IMHO
the quat doesn't serve any intrinsic purpose in mouse.cxx, but I'm not about
to rip it out. It would seem that there more conventional ways to get
spherical data that are just as fast. In any case all the viewer was pulling
from the quat matrix was the pitch value so I modified mouse.cxx to output to
our pitchOffset input and that works fine.
I've changed the native values to degrees from radians where appropriate.
This required a conversion from degrees to radians in a couple modules that
access the interface. Perhaps we should add interface calls that do the
conversion, e.g. a getHeadingOffset_rad() to go along with the
getHeadingOffset_deg().
On the view_offset (now headingOffset) thing there are two entry points
because of the ability to instantly switch views or to scroll to a new view
angle (by hitting the numeric keys for example). This leaves an anomaly in
the interface which should be resolved by adding "goal" settings to the
interface, e.g. a setGoalHeadingOffset_deg(), setGoalPitchOffset_deg(), etc.
Other than these two issues, the next step here will be to look at some
further optimizations, and to write support code for a tower view. That
should be fairly simple at this point. I was considering creating a
"simulated tower view" or "pedestrian view" that defaulted to a position off
to the right of whereever the plane is at the moment you switch to the tower
view. This could be a fall back when we don't have an actual tower location
at hand (as would be the case with rural airports).
ViewManager:
Basically all I did here was neaten things up by ripping out excess crap and
made it compatible as is with the new interface.
The result is that viewmanager is now ready to be developed. The two
preexisting views are still hardcoded into the view manager. The next step
would be to design configuration xml (eg /sim/view[x]/config/blahblah) that
could be used to set up as many views as we want. If we want to take the easy
way out, we might want to insist that view[0] be a pilot-view and have
viewmanager check for that.
and fixes a 'potential bug' if the FGFS View code were to change
I also consolidated the specialized IntersectLeaf()
as they really didn't gain us much outside of their having
'more direct access into the SSG controlled data'
I would like to see the fgCurrentElevation functions moved
out of hitlist.cxx.
The one obstacle is their being dependent on my PLib
auxillary functions
ssgGetEntityTransform()
ssgGetCurrentBSphere()
code has been run through astyle with the default options
separate header file. This change will help integrate properties into
JSBSim.
Also, I (David Megginson) removed most of the SimGear include
statements from globals.hxx, reducing the amount of recompilation
every time SimGear changes. This required making minor changes to a
lot of files that were depending on the side-effects of the inclusions
in globals.hxx.
