where type is one of string (default), double, float, long, int, bool
Using only the first letter works, too.
--prop:foo=123 ... sets property foo to string 123 (old behavior)
--prop:string:foo=123 ... verbose version of above
--prop:s:foo=123 ... slightly less verbose version of above
--prop:bool:foo=1 ... makes property a bool of value 'true'
I hope this isn't considered a silly gimmick. I need this often and maybe
other developers do, too. It's useful in cases where the difference really
matters. if (getprop("/foo")), for instance, is TRUE even when the property
contains string "false", as all strings are TRUE.
efficiently performing "Dijkstra algorithm".
Durk Talsma: Added the detection of "circular" wait situations in the AI
ground network. A circular wait is a situation where aircraft a waits for
b; b waits for c; and c (in turn) waits for a. The checkCircularWaits
function detects these situations.
The current "solution" to a circular wait is rather crude: Remove the
aircraft from the scene. A proper solution needs a lot more work, however,
and at least this patch stops the AI system from clogging up. in case of a
circular wait.
data for AI traffic. Default performance classes are still available as a
backup. This database will allow the calculation of aircraft-specific
take-off speed and estimate runway lenght requirements. Further added
rudimentary support for take-off and landing rotation of AIAircraft.
together -- there's only *one* instrument node now
- don't take "random" tacan, but <tacan-source> from the instrumentation
config (or /instrumentation/tacan[0] by default)
- don't take "random" display-controls from /instrumentation/tacan[0]
- default name is now "radar" (formerly "wxradar")
* it says it's a warning (while in fact it's just saying what it's doing)
* the user can't do much here (yes, flying slower, but it doesn't say that :-)
* scrolling those countless messages in the terminal puts stress on the CPU
in a time when it's apparently already struggling
- re-enable od_gauge ("owner drawn" render-to-texture instruments)
- implement radar in c++ (unlimited number of clouds/ai/mp/... objects,
better performance)
or nil if no terrain intersection could be made (tile not loaded yet).
<matdata> is a hash with information about the surface material, or nil
if no material is assigned (shouldn't really happen, but one never knows).
Example:
var ac = geo.aircraft_position();
var data = geoddata(ac.lat(), ac.lon());
debug.dump(data);
# which outputs
[ 294.5862574369132, { light_coverage : 0, bumpiness : 0, load_resistance : 1e+30,
solid : 1, names : [ "pc_taxiway", "dirt_rwytaxiway" ], friction_factor : 1,
rolling_friction : 0.02 } ]
With this information it can be determined how far an object would sink in,
if the coordinate is on a runway, etc.
foreach (var n; data[1].names)
if (string.match(n, "p[ac]_*"))
im_on_a_runway();
/sim/screneryloaded-override was "true". At least one subsystem (od_gauge)
waits for /sim/sceneryloaded to bypass CPU intensive code until the scenery
is up. This broke e.g. the RTT-radar when using /sim/screneryloaded-override
--prop:sim/sceneryloaded-override=true has the effect that fgfs
doesn't show the splash screen until the scenery is loaded, but shows
the OTW view (scenery/aircraft) at the earliest possible moment. This is
useful for developers who often need to run fgfs only to check some minor
detail, while not caring about stuttering caused by scenery loading.
simple SG_LOG instead. The user didn't call the fgcommand, so why should
s/he be bothered with that? And the actually caller of the command gets a
return value and can pop up a dialog if it thinks it's necessary.
Why /sim/fg-current at all? Because we have a file selector dialog
(still unfinished), and one might like to start it from the current
directory, to find saved flights/screenshots/whatever.
FGManipulator.*:
"This patch works around a bug in OSG's handling of modifier keys. The
symptom of the bug is that modifier keys don't appear to be released."
fg_os_osgviewer.cxx:
"This patch fixes the test for support of cursor changes in OSG 2.0."
because this allows to load from FG_HOME. To reduce security risks, always
append an ".xml" extension if there was none. Makes it hard to read /etc/secret
and to overwrite ~/.bashrc. :-)
IRC wanted this to be scritable) and add it back (as a tip popup) via
a little nasal in the keyboard handler. Also put the synthesis of
property nodes back into fgcommand(), because I got cold feet.
missing, for sanity. Note that this will pass the resulting NULL
pointer through into the underlying SGCommand handlers, some of which
may be unprepared for it. So basically this is now yet another way
you can use Nasal to exercise bugs and hose your sim; no biggie.
- if no <impact-reports> node is defined for a particular submodel, then
write the path to /ai/models/model-impact instead
- don't tie() properties that are only ever set a single time, if at all!
- better variable names
src/Scenery/tileentry.cxx: Jonathan Wagner:
Removes black dots by accounting for radius of nodes
when calculating visible nodes for traversal without removing the
optimization. Confirmed fix with a few people on IRC.
src/GUI/gui.h src/GUI/gui_funcs.cxx src/Main/fg_commands.cxx
src/Main/renderer.cxx src/Main/renderer.hxx: Tim Moore:
These patches implement a command to dump the entire OSG scene graph as
a .osg text file. While large, this allows debuggers to really see
what's happening in the scene graph.
configure.ac src/Main/Makefile.am src/Main/fg_os.cxx
src/Main/fg_os.hxx src/Main/fg_os_sdl.cxx src/Main/main.cxx
src/Main/renderer.cxx src/Main/renderer.hxx
src/Network/jpg-httpd.cxx
Added Files:
src/Main/FGManipulator.cxx src/Main/FGManipulator.hxx
src/Main/fg_os_osgviewer.cxx:
Tim Moore: Make use of osgViewer.
a report node in the submodels config:
<impact-reports>/sim/model/cow/impact</impact-reports>
When an impact happens, then the path of the submodel will be written to
this node. An attached listener function can evaluate the impact properties.
at all is that this method is meant to be deprecated. But if it doesn't
say that, and there's no generic replacement at all, then it's rather
pointless.
- simplify parameter initialization (The old code copied from Instrumentation/
but has been simplified there in the same manner a few months ago
The new method is less picky about additional nodes ane outputs less
pointless alerts. If there shall really be a check for that, then
this should be a separate function. But it's nowhere else done in fgfs.
recover instead
- it was apparently planned to run the updated loop only every 1000th
frame, but the counter isn't reset, so it runs every frame
- use SG_LOG instead of cerr
- don't add redundant slashes in SGPath::append()
throwing an instance of 'sg_io_exception'\nAbandon". And this is caused
by compiling fgfs/sg without exception support (unlikely) or linking
against a libSDL/libglut that was compiled/linked without execption
support. While we can't fix that, we can tell the users who's to blame. :-)
- handle const char * exceptions
"minor update for the rotor FDM. It results in a more realistic
calculation of the phase shift of rotor and therefor in a little bit
more realistic flight behavior.
(Additionally you can modify the initial position of the rotor and some
(not finished) modifications for the jet ranger rotor)."
show "secret" values, that is: values of nodes with children. These
can be used like all normal (leaf) properties, but their values were
until now only shown in writeProperties() dumps. Also show the
number of attached listeners. Example: foo = 'bar' (string, AU, L3).
dialog.cxx: add warning message for broken <format>s; cosmetics
- props is easy to mix up with the --prop option (for setting properties)
- the name is unspecific and inconsistent: other option names describe
the protocol -- the way to get the properties. How is, for example,
--httpd less about prop(ertie)s?
- two identical options easily confuse people, as can be seen in The
FlightGear Manual, where --telnet and --props were described differently
/sim/view[*] that it finds. It's not only unnecessary that view definitions
have subsequent indices, but aircraft are now *requested* to use indices
100++. /sim/view[0] .. /sim/view[99] are reserved for the system. (Not
that we'd ever need that many, This is just a convention, it's nowhere
hard-coded.)
- replace the string operations for property paths by method calls & other
improvements
because nasal's f_interpolate() may be called in Nasal at times when the
GENERAL subsystem group is being deconstructed; access it by addressing
the group directly, as using globals->get_subsystem() does then not
work any more then; yeah, it's all for a rare border case ... :-)
NasalSys.cxx more robust instead. The reason for the crash was that during
fgfs shutdown destroyed subsystems (GENERAL group) still need Nasal access
(for AI Model destruction listeners), but at that point globals->get_subsystem()
can't even deliver the "nasal" subsystem (INIT group). One way to solve that
problem would have been to replace globals->get_subsystem("nasal") by
globals->get_subsystem_mgr()->get_group(SGSubsystemMgr::INIT)->get_subsystem("nasal"),
but Andy decided to store a pointer to the active "nasal" subsysten in
NasalSys.cxx instead, as the "nasal" subsystem needs to be accessed in
every single Nasal extension function, and multiple "nasal" subsystems are
out of the question, anyway.
we need to explicitly destroy that here, too, so that it has guaranteed
access to the Nasal subsystem. Otherwise we get a segfault on exit. When
the next subsystem needs this special treatement (radar?), we should
introduce a new subsystem group (in addition to INIT and GENERAL)
"FATAL: PUI: No Live Interface! Forgot to call puInit ?"
We shouldn't use the splash progress message before guiInit().
Leave the "idle_state" step for now, to keep the similarity
with fg/plib as big as possible. This can be dropped later.
Patch to enable atc chatter (and any other arbitrary "message" audio file)
to be played at any specified volume. (Previously these messages were always
played at a hardcoded volume of 1.0)
- loop up file name in the cache at startup. If it's found, check if the
file exists and use it, otherwise scan $FG_ROOT/Aircraft/ as usual,
and create a new cache while doing that. Rebuild cache on FG_ROOT change.
getAttribute("archive") returns 1 if the attribute is set, and 0 otherwise.
Allow to query and to set all properties by not specifying an attribute
string: getAttribute() returns all attributes bit coded in an integer,
and setAttribute(attr) sets all attributes. No assumptions may be made
about the meaning of the bits -- they can be changed in future fgfs releases.
The only valid use is to compare or set attribute numbers obtained in the
same fgfs run. This is meant for allowing full copies of property branches.
Also add getAttribute query strings "children" for the number of children,
and "alias".
- fix breakage due to former commit (AIManager.cxx, r1.72)
- make AI properties available in AIBase
- add <valid> property for animations/nasal scripts
- support more MP and AI targets
- add target select and altitude display
their XML wrapper/animation file. They can access their /ai/models node
via cmdarg() function. Example:
<nasal>
<load>
print("Hi, I'm the Nimitz. My data are under ",
cmdarg().getPath());
</load>
<unload>
...
</unload>
</nasal>
Note, however, that the <unload> block is only called on exit at the moment,
not when the tile is unloaded.
"""
"Flight plans" which can start at a given time (gmt)
WAITUNTIL tokens which pause the flight plans until a given time (gmt)
Submodels can now be attached to any AI objects (except submodels - it can
be done, but in my experimental code it's too expensive in frame rate atm)
"No-roll" attribute added to Ballistic objects - useful for wakes and the
like
"Random" attribute added to Ballistic objects (adds =- 5% to the Cd) -
useful for smoke, exhausts
If the <trigger> tag is not specified the Ballistic object/s will be
released at start-up (cannot be stopped)
Submodels are not released from AI Objects if the AI Object is more than 15
miles away.
"""
mf: minor code and formatting fixes; submodels.?xx were FUBAR and are thus
astyle formatted;
NOTE that <name> tags END, EOF, WAIT, WAITUNTIL are *depreciated*.
Don't get too used to them. This will have to be moved from the "name"
to regular engries.
Nasal now supports calls to "subcontexts" and errors can be thrown
across them, leading to complete stack traces when call() is used,
instead of the truncated ones we now see.
Vectors can now be concatenated using the ~ operator that used to work
only for strings.
Better runtime error messages in general due to a fancier
naRuntimeError() implementation
A big data size shrink on 64 bit systems; the size of a naRef dropped
by a factor of two.
"Braceless code blocks" have been added to the parser, so you can
write expressions like "if(a) b();" just like in C. Note that there's
still a parser bug in there that fails when you nest a braced block
within a braceless one.
Character constants that appear in Nasal source code can now be
literal multibyte UTF8 characters (this was always supported for
string literals, but character constants were forced to be a single
byte).
New modules: "bits", "thread", "utf8" and (gulp...) "io". The bits
library might be useful to FlightGear, the utf8 one probably not as
Plib does not support wide character text rendering. The thread
library will work fine for spawning threads to do Nasal stuff, but
obviously contact with the rest of FlightGear must be
hand-synchronized as FlightGear isn't threadsafe. The io library is
no doubt the most useful, as it exposes all the basic stdio.h
facilities; it's also frighteningly dangerous when combined with
networked code...
have no children (in which case they default to 1px thickness & stretch).
This allows to just write <hrule/> instead of <hrule><dummy/></hrule>.
One can still use <hrule><pref-height>3</pref-height></hrule>, of course.
layout.cxx: drop silly do??Box calls for hrule/vrule (yes, I wrote that :-)
discard the display part. The curly braces wouldn't be spoken anyway,
and the | would be spoken as "vertical bar", which is completely
useless (which is why it had been disabled in the past already).
"Implement 'flightplans' for AIShips. This patch also introduces the concept
of a 'WAIT' token for AIShips: when the flightplan reaches a 'WAIT', the
AIShip stops and pauses for the specified time (secs)."
"""
Fix Y2K bug triggering string overflow
sim_control_.date_string is a char[7], so it can contain "yymmdd" and
the terminating '\0'. However, nowtime->tm_year is 107 for the year 2007,
so you'll end up with a 7 digit number and the string written to
sim_control_.date_string is longer than sim_control_.date_string is.
Ouch!
"""
mf: ... and sim_control_.date_string isn't even used.
done for performance reasons, but print() should be able to output any
valid string, and when SG_LOG uses strings and streams already, then we
can use that here, too. (Not discussed with Andy yet.)
before the property tree is stored away for reinit, so the signal would
be emitted again on reset.
- fix inconsistent style that sneaked in with a previous patch
in $FG_ROOT/Nasal/* were loaded and executed, and thus all Nasal library
functions are available. This was in the past only done with settimer(..., 0),
constructions, but suchlike triggered timer functions are executed
*after* aircraft specific Nasal files were loaded, so they can't be
used for internal library initialization, where e.g. props.Node() is
already needed.
"""
- ground properties (e.g. feel bumpiness and the reduced friction of
grass or go swimming with the beaver)
- initial load for yasim gears (to get rid of the jitter the beaver has
on ground)
- glider/winch/aerotow (do winch start with YASim glider or do aerotow
over the net) I will place a how-to on the wiki soon, here very short:
use the sgs233y (or the bocian if you have AJ (up ot now) non-GPL
bocian)
winch start: Ctrl-w for placing the winch, hold w to winch, press
Shift-w to release the tow
aerotow: Place the glider within 60m to a MP-aircraft, press
Ctrl-t to tow to this aircraft. If the MP-aircraft is the
J3 and the patch is installed on both sides, the J3 feels the
forces, too. The J3-pilot has to taxi very slow up to the
moment, the glider starts moving. Increase the throttle gently.
Don't lift the J3 early, wait for the glider being lifted,
lift gently.
"""
(including all subdirs and with max depth!), but only the outmost level.
There are no *-set.xml files in deeper nested dirs, and with an ever growing
number of aircraft the search just lasts too long.
Here is a patch for two bugs in the AI/multiplayer part:
1. Cannot find model file *.ac error message (was only a false message,
anything worked correctly, the model was loaded from the correct path
afterwards).
2. Often many multiplayer aircrafts are missing in the property-tree.
(but I need them for aerotowing). There is still another bug: The
property in some circumstances seems not to be cleaned up after logout
of a multiplayer. I have added a workaround for this, but I don't now,
if it 100% works (should have no side effects, just aerotow would not
work sometimes). For testing I need more traffic on the mp-server.
src/Input/input.cxx src/Main/renderer.cxx
src/Main/renderer.hxx src/Scenery/scenery.cxx
src/Scenery/scenery.hxx: Move scenery picking into the renderer.
There is most of the required data defined. Also we can better use
the pick visitor that will be needed with th upcommung panel code.
src/FDM/groundcache.cxx src/FDM/groundcache.hxx: Store the material
that was used to get the croase agl level and return that material
in case we need to make use of that croase value.
