split). If SimGear is configured --with-jpeg-factory, then FlightGear
will fail to build unless this function is present.
FIXME: this is very messy architecturally -- find a better solution,
like passing this explicitly as a callback to the libJPEG class
(SimGear should not have a dependency on FlightGear).
I've made appropriate changes to Readme.submodels to reflect the
variation of Cd with Mach number.
Spitfire.submodel has been changed to use the variation of Cd with Mach
number
Submodel.cxx has been changed so that the default value of Cd is the
subsonic Cd of a non-boat tailed bullet.
I've finished the variation of Cd with Mach number.
The calculations are only applicable to ballistic
objects, and then strictly one shape: non boat-tailed bullets/shells, so
I've put them in AIBallistic rather than AIBAase. For all inputs, Cd
should be the sub-sonic value, so bullets will need changing.
I've just posted a graphical analysis here:
http://myweb.tiscali.co.uk/vmeazza/FlightGear/cd_mach.pdf
I'm attaching a small change to Andy's dialog.cxx that I needed
to make so that it enables XML/Nasal-dialogs to also contain
puLargeInput boxes.
The text will be retrieved/buffered from/within a specified
property tree, like:
<textbox>
<x>100</x>
<y>100</y>
<width>200</width>
<height>100</height>
<property>/gui/path-to-text-node/contents</property>
<slider>15</slider>
<editable>true</editable>
</textbox>
The calculation of submodel mass from weight has been moved from AIBallistic
to Submodel so that it is calculated only once, rather than on every
iteration as a present. The parameter <contents> has been added, primarily
so that droptanks will have the proper mass. It is the path to an
appropriate property containing a weight in lbs.
Care has to be taken with the use of <contents> because after a reset there
appears to be a delay in submodel instantiation (dt not properly reset???)
and the weight property is not always picked up before it is set to zero in
the key bindings. Slightly hard to explain. It works fine if FGFS has not
been reset though. There is a partial solution which involves the rejigging
of the fuel and gui nasal scripts, but there is still the visible delay in
instantiation to be resolved. I've nearly done the nasal fixes, which will
form part of an update to the Hunter only. I'll probably complete those
later today.
The value of rho (air density) varies with height. (Including the upper
stratosphere, ust in case someone wants to model ICBMs.) The standard
atmosphere is used (based on a sea-level temperature of 15 deg C.).
Erik Hofman:
I moved this code over the AIBase::update() so all AIModels can make
use of rho, temperature, pressure, etc.
I have added <Cd> and <weight> to the input parameters in the submodels.xml
script. Raw data may be used, thus avoiding the need to guestimate <eda>.
Eda remains, but should now be used to enter the proper cross-sectional
area.
Split up main.cxx into a program manegement part (which remains in
main.cxx) and a render part (the new renderer.?xx files). Also turn
the renderer into a small class of it's own. At this time not really
exctining because most of the stuff is still global, but it allows us
to slowly migrate some of the global definitions into the new class.
The FGRenderer class is now managed by globals, so to get the renderer
just call gloabals->get_renderer()
At some pijt it might be a good idea to also turn the remaining code in
main into a class of it's own. With a bit of luck we end up with a more
robust, and better maintainable code.
I had to reverse a number of signs to get it right. I took the opportunity
to add roll to the submodel so that droptanks will come off with the right
orientation. I have neither added the rotational speed to the submodel, nor
yaw, so if you release droptanks with significant roll rate or yaw angle on
the aircraft the submodel will not be quite right. Straight and level, or
nearly so, is fine.
paging system much more robust when position change is very rapid and sporadic.
Recall that we must load 3d models in the main render thread because model
loading can trigger opengl calls (i.e. with texture loading) and all opengl
calls *must* happen in the main render thread.
To accomplish this we load the base tile in the pager thread and build a work
queue of external models that need to be loaded. We never allow a tile to be
paged out of the tile cache until all it's pending model loads are complete.
However, when changing position very rapidly, we can quickly create a huge
backlog of pending model loads because we are changing positions faster than we
can load the associated models for the existing tiles. The end result is
that tiles that are long out of range can't be removed because there is still
a huge backlog of pending model load requests and memory blows up.
This change being committed allows the tile paging system to remove tiles
if they are out of range, even when there are pending models to load. The
model loading code in the render thread can now check to see if the tile
exists and discard any model load request for tiles that no longer exist.
This situation should never occur in normal operation, but could occur in
"contrived" situations where an external script was rapidly changing
the simulator position to then be able to query FG terrain height, and doing
this for a large number of points that are distributed across a large area.
The maths, so far, is now correct. Roll and pitch are now both in the
correct sense. The aircraft velocity is added correctly to the
submodel velocity, and the submodel is now visible when instantiated.
However, the velocity is measured at the aircraft centre. To be totally
correct we ought to take into account the aircraft's rotational
velocity. We have pitch rate and roll rate available, but not yaw rate
(small anyway).
Here are some things I've added to the submodel code.
First, I added a first_time value that is true when the trigger is pressed and
false when the trigger is released. The true value is also made false after
the first pass through release(). Release() then uses this to force the
first dt (per salvo) to be zero. I was hoping this would make the submodel
appear closer to the airplane, but I don't notice a difference with the
tracers. In a prior test I found that the first dt is about 2.5 times larger
than subsequent ones. Maybe this will be effective with slower submodels,
like smoke, contrails, etc.
Secondly, I updated the IC.elevation and IC.azimuth calcs to correctly add in
the yaw and pitch offsets, corrected for bank angle. Actually this is still
an estimation. A proper calculation will sum the submodels vector with the
airplane's vector. Until that's done only models which are fired forward
will have proper IC.
Testing revealed that the code was not reading y-offset - a
typo in the original code, and roll was in the wrong sense. All readily
fixable, and it now works.
I've added another parameter to the submodel - wind.
It's activated by the entry <wind>true</wind> in the ../submodel.xml file.
If true, the submodel is affected by the local wind, otherwise not. The
parameter defaults to false. This is useful for exhausts and smoke, and
possibly all objects.
Attached are the modified files to add buoyancy as a parameter for a
ballistic object. It may be set by adding
<buoyancy>x</buoyancy> to the submodel .xml file, where x is the appropriate
value (ft per sec2):
32 neutral buoyancy - contrails
>32 positive buoyancy - exhaust plumes
(0 non-op - default value)
If <buoyancy>x</buoyancy> is not used, then there is no effect on the
current ballistic model
Silly me. I was starting the timer at zero, so the first tracer didn't fly
until 0.25 seconds after pulling the trigger. Now the timer starts at the
same value as "delay", so the first round comes out immediately.
Also, I've added an optional configuration attribute that allows you to change
the ballistics of the submodel. This allows parachutes, or anything else
that has ballistics different from a bullet. The attribute is called "eda",
which is the equivalent drag area. Default value is 0.007, which gives the
same ballistics as the current tracers. Increasing this value gives more
drag. A value of 2.0 looks good for a parachute.
math stuff
########################################################################
The deceleration of the ballictic object is now given by:
[ (rho) (Cd) ] / [ (1/2) (m) ] * A * (V * V)
where rho is sea-level air density, and Cd and m are fixed, bullet-like
values. So the calculation is:
0.0116918 * A * (V * V)
The value "A" is what I'm calling the "eda" (equivalent drag area).
########################################################################
A parachute model will have to be built so that the parachutist's feet
are in the forward x-direction.
Here is the submodel.xml config I use for "parachutes":
<submodel>
<name>flares</name>
<model>Models/Geometry/flare.ac</model>
<trigger>systems/submodels/submodel[0]/trigger</trigger>
<speed>0.0</speed>
<repeat>true</repeat>
<delay>0.85</delay>
<count>4</count>
<x-offset>0.0</x-offset>
<y-offset>0.0</y-offset>
<z-offset>-4.0</z-offset>
<yaw-offset>0.0</yaw-offset>
<pitch-offset>0.0</pitch-offset>
<eda>2.0</eda>
</submodel>
Last night I sent these new files to Vivian to fix a problem he found. Since
we can have more than one submodel we need more than one "count" property.
The new code creates a property systems/submodels/submodel[n]/count for each
submodel. Vivian is using this count property for his sound.
Here is an update for the submodel system. This will allow submodels to be
defined for any aircraft, and there are no default submodels. To use this
submodel system you need to set up a binding (slight change in property name
from last one, but you can use any property name you like, as long as it
matches the name in the submodels.xml file, see below):
<button n="0">
<desc>Trigger</desc>
<binding>
<command>property-assign</command>
<property>/systems/submodels/trigger</property>
<value type="bool">true</value>
</binding>
<mod-up>
<binding>
<command>property-assign</command>
<property>/systems/submodels/trigger</property>
<value type="bool">false</value>
</binding>
</mod-up>
</button>
Then in your *-set.xml file you need to define a path to the configuration
file (similar to the way the electrical system is now done):
<sim>
...
<systems>
<electrical>
<path>Aircraft/Generic/generic-electrical.xml</path>
</electrical>
<submodels>
<serviceable type="bool">true</serviceable>
<path>Aircraft/FW190/submodels.xml</path>
</submodels>
</systems>
...
</sim>
Then you put the submodel configuration file in your aircraft's directory.
I've attached a file, submodels.xml, that can be used to define a gun that
works just like the former one did.
There are two things remaining to be done. One is to change the function
SubmodelSystem::transform() to properly position the submodel. This will
require some complicated matrix code that I might borrow from Yasim.
Well here's some tracer stuff. If fiddled around with submodel.cxx. It now
does what it says - you need to put this:
<!-- trial gun system -->
<systems>
<submodel>
<serviceable type="bool">true</serviceable>
<amount type="int">120</amount>
</submodel>
</systems>
In the *-set.xml file NOT within <sim></sim>. Trouble is it still defaults
to serviceable=true, but it also defaults to amount=0. Unless this bit of
code is included it wont run, so other models can't fire inappropriate
tracer. Revised submodel.cxx file attached.
I've changed to a non-billboard solution. I tried to make the viewing angle
of the tracer less than 180 degs, but failed. Close enough I think. It's
still a bit big, but a reasonable compromise. .AC file attached.
I remain concerned about the tracer colour. In practice, red is better (and
it's what I am used to) but David seems set on white, and I don't want to
upset him. I'm going to adjust the texture a bit more tomorrow.
Right now the code is not very configurable, and there is only one submodel per airplane possible. It is implemented as an SGSubSystem, just like the electrics, vacuum, etc. systems. To make it work you need to make a release binding like this (for my joystick trigger):
<button n="0">
<desc>Trigger</desc>
<binding>
<command>property-assign</command>
<property>/systems/submodel/trigger</property>
<value type="bool">true</value>
</binding>
<mod-up>
<binding>
<command>property-assign</command>
<property>/systems/submodel/trigger</property>
<value type="bool">false</value>
</binding>
</mod-up>
</button>
Then, each airplane that uses the system should have something like this added to its *-set.xml file (note that this does *not* go within the <sim></sim> tags):
<systems>
<submodel>
<serviceable type="bool">true</serviceable>
<amount type="int">70</amount>
</submodel>
</systems>
Future improvements will include:
1) more configurability, so the user can create multiple submodels, and can assign them different locations, and pitch and yaw adjustments, and nitial velocity.
2) sound?
3) a more accurate calculation of the submodels location at any pitch/roll/yaw.
4) a way to pre-load the model, so the AI code doesn't have to parse the model every time it creates an instance.
I think that's all of it.
All necessary elements for an ADF gauge had been migrated from
Cockpit/kr_87.cxx to Instrumentation/adf.cxx. Migrating the sound
related elements was apparently planned, but not done yet. This
intermediate state broke the ident morse sound: it couldn't get
turned off and it always indicated "SF", regardless of the tuned-in
frequency. The following patches continue the migration:
adf-radio.diff => Base/Aircraft/Instruments/adf-radio.xml:
---------------------------------------------------------------
* sets maximum volume to 1 (rather than 2); Not only is 1
loud enough (and 2 unpleasantly noisy), it also prevents
the knob from being turned to non-existant positions. :-)
* fixes wrong use of /instrumentation/adf/ident
* the voice/ident selector(?) remains unchanged, but as it's
not switched to "IDENT", there'll be no ident sound by default
this is consistent with other sounds and DME.
radiostack.diff => src/Cockpit/radiostack.[ch]xx:
---------------------------------------------------------------
* comment out use of FGKR_87 class. kr_87.[ch]xx is now no
longer used. kr-87adf.xml would no longer work, either, but
isn't used anywhere, anyway. Future adf radios have to use
the adf instrument, using xml/Nasal for specific hardware
implementation details.
adf.diff => src/Instrumentation/adf.[ch]xx:
---------------------------------------------------------------
* adds ident morse sound capability using two new input
properties:
- /instrumentation/adf/volume-norm (double)
- /instrumentation/adf/ident-audible (bool)
this was always only meant to be a test program for the metar lib, but now
that people are referring to it as a means to get metar reports, I think a
usage info is desirable. The list of test ids, on the other hand, isn't
necessary any more. This can still be handled by a Makefile or the commandline.
I'm all for keeping this tool in cvs, however. And also the not-used stuff
therein is a welcome source for how to use the SGMetar class.
This is a workaround for an issue where the xml dialogs were shrinking on
subsequent pops.
Andy Ross says:
That looks like it should be fine for a release-time workaround. The
2 pixel border on dialogs is at best a minor feature, and probably
invisible since the sub-frames all have their own padding.
Clearly the right fix would be to find out where the code is getting
confused by the previous layout. In principle, the layout should be
idempotent: if you don't change the layout constraints, it shouldn't
change its layout. There's still a bug in there somewhere.
I've included the latest fixes to the Traffic Manager/AI flightplan generation
code. Most of the code changes are in AIFllightplan.cxx. This is the code
that runs without depending on predefined FlightPlans in
#FG_ROOT/Data/AI/Flightplans.i
As suggested by Dave, I've also added a new property in
preferences.xml: /sim/traffic-manager/enabled, which is used to control
whether or not the traffic manager is active.
I'm still working on a few more 737 traffic patterns, those are going to take
a little longer, so I didn't want to wait sending in this code.
Finally, I haven't put much effort into ensuring "aeronautical correctness" in
this version yet. The code works on my system, but what the AI plane do may
actaully be quite rediculous. But I'd like to leave that for the next
version.
Stub in hooks for Propeller feathering controls and the turbo prop "condition"
lever.
I added a line in FGFDM.cpp to force control properties to exist if they
don't already. This way you can specify anything you want and find them
in the property browser, otherwise no one else may create them and you are
stuck.
In PropEngine::solve() the code original sets _running = true at the
beginning and then sets running = false at the end. I changed this to
save the current value at the start, set to true, solve(), and then
restore the original value at the end. That way if we start off with
_running = true, we don't have to hack up the calc() routine which wasn't
using the value anyway.
Finally I added some very initial support to shut down a turbine engine
(_running = false) when the condition lever goes to zero.
for localizers. I further hacked this to support GS and DME transmitters
(although Robin's DME transmitter data doesn't convey orientation
unfortunately.)
I have 3 issues that are fixed by this set of patches.
1. In extensions.cxx
#else if !defined( WIN32 ) must be changed by
#elif !defined( WIN32 ) because the text after #else
seems to be ignored
2. banner is not available on windows, only cygwin
3. ANSI escape sequences are not interpreted on the
windows console. We just have garbage that is hard
to read.
motion.
- Track a timeout value so we can optionally hide the mouse pointer after
some user specified timeout period.
- in doMouseMotion() always update m.x and m.y even if we return early because
pui wanted the event. Without this, we can't reliably detect motion vs.
inactivity.
- in _update_mouse() add a dt parameter so we can decriment the timeout value
in "real" time.
- in _update_mouse() optionally hide the mouse pointer if m.timeout goes to
zero. Restore the pointer (and the timeout counter) if the mouse is moved.
will delay it's reply by 50ms. The ground station can change it's reply delay
to trick the airborn dme unit into reporting a distance that is offset from
the true distance by some constant value. In FG we model this by subtracting
a fixed distance from the actual distance.
It is thus possible in our implimentation for the displayed distance to become
negative. This patch clamp DME distance to a minimum value of 0.00 so it can
never go negative.
A good elevation is critical for proper glide slope modeling. This patch
assigns the average field elevation to any ILS component that doesn't have
a valid elevation.
Also, for an ILS approach, use the GS transmitter elevation for glide slope
calculations rather than the localizer elevation, in some cases this can
make a big difference.
Wouldn't it be better to prepare the whole list of paths (or two
separate ones for Terrain/Objects if necessary) in FGGlobals::set_fg_scenery,
and to pass the vector<string>s to FGTileEntry::load? It doesn't seem to make
a lot of sense to split the path up, modify it, mount it together to one string
again, and then let FGTileEntry::load split it up again.
Here we go:
Main/globals.cxx
================
As fg_scenery is now a string_list, we don't need initialization. Furthermore,
this list is cleared with every set_fg_scenery() call.
ctor: create default dir from fg_root if necessary. Otherwise check all paths
of --fg-scenery/FG_SCENERY: If the path doesn't exist, ignore it. If it contains
a dir Terrain and/or Objects, then only add that to the list. If it contains
neither, then use the path as is.
Scenery/tileentry.cxx
=====================
Trivial: don't split a "base path", but use the given path_list as is.
(I considered a variable name "path_list" better suited than "search".)
Scenery/FGTileLoader.cxx
========================
No more fiddling with sub-paths. This has to be delivered by get_fg_scenery
already.
Here's some additions to AI that allow refueling from an AI tanker (the actual
onload of fuel must be handled by the user's FDM of course, this just lets
the FDM know that the user is in position to refuel).
I've added a new class of AIAircraft called "tanker". It uses the same
performance struct as a jet transport. An AI tanker is just like an AI jet
transport, except it uses the already-existing radar data to control the
boolean property systems/refuel/contact. The code change was minimal.
An AI tanker can be created like this:
<entry>
<callsign>Esso 1</callsign>
<type>aircraft</type>
<class>tanker</class>
<model>Aircraft/737/Models/boeing733.xml</model>
<latitude>37.61633</latitude>
<longitude>-122.38334</longitude>
<altitude>3000</altitude>
<heading>020</heading>
<speed>280</speed>
<roll>-15</roll>
</entry>
This puts a tanker over KSFO at 3000 feet, in a left-hand orbit. When the
user gets within refueling range (contact position) then the property
systems/refuel/contact will be true. Otherwise it is false.
The dimensions of the refueling envelope are pretty rough right now, but still
usable. The user must be behind the tanker (ie. radar y_offset > 0). The
user must be at or below the tanker's altitude (ie. radar elevation > 0).
The user's lat/lon must be within 250 feet of the tanker's lat/lon (ie. radar
range_ft < 250). This last requirement is loose because the radar data is
only updated every 100 ms, which is accurate enough for radar use, but
which is sloppy for air refueling. This could be tightened up by increasing
the radar update rate to once every sim cycle.
I'm going to add a light to the T-38 instrument panel that will monitor the
property systems/refuel/contact. This will make it easier to explore the
boundaries of the refueling envelope.
Here's some new AI stuff.
1) AI objects must now be defined in a scenario file, not in preferences.xml
or a *-set file. (Of course this doesn't prevent objects from being created
dynamically, as with Durk's traffic manager).
2) A new demo_scenario file is attached. It creates 3 aircraft, a sailboat,
and a thunderstorm.
3) Objects without flightplans live forever.
4) FGAIShip::ProcessFlightplan() is not yet implemented.
5) preferences.xml should now define only <enabled> and <scenario>
These change add some code that at initialization time will snap all
localizers into perfect alignment with their runways. It's my experience
that the DAFIF/FAA data reports runway and localizer headings to a level
of precision that is great for making charts, or adjusting your OBS, etc.
But the level of precision of this data can be far enough off to make you
visibly *un*aligned with the runway when the CDI needle is centered.
There are probably cases where the localizer isn't really perfectly
aligned with the runway, or intentionally misaligned to avoid obstacles
or terrain. So I have made this configurable for those that trust the
data more than I do. Just set "/sim/navdb/auto-align-localizers" to
true/false in the preferences file to turn this feature on or off in the
code.
- FG now directly supports Robin's native nav database file format.
- His latest data now separates out dme, gs, loc, and marker beacon
transmitters rather than lumping them all into a single "ILS" record.
- These new data structure changes prompted me to do some code restructuring
so that internally these different types of navaids are all kept as
separate lists and searched and handled separately.
- This structural change had a cascading affect on any code that
references or uses the nav databases. I've gone and "touched" a lot of
nav related code in a lot of places.
- As an added bonus, the new data (and code) adds DME bias so these will
all now read as they do in real life.
- Added Navaids/navdb.cxx and Navaids/navdb.hxx which provide a front
end loaders for the nav data.
- Added Navaids/navrecord.hxx which is a new "generic" nav data record.
- Removed Navaids/ils.hxx, Navaids/ilslist.cxx, Navaids/ilslist.hxx,
Navaids/mkrbeacons.cxx, and Navaids/mkrbeacons.hxx which are all now
depricated.
1. Removed aircraft roll on ground.
2. Decreased descent pitch angle.
3. Updated flightplans to include <on-ground>
4. Fixed property indexing, so all AI aircraft have their own property branch
The default value of <on-ground> is false, so you only need to specify it when
on the ground. For takeoff you need to specify <on-ground>true</on-ground>
for the first waypoint, and for the acceleration waypoint. For landing you
need to specify it for the touchdown point and any taxi points.
One problem. WARNING **** There is a bug in the way the property system
works, which causes a segfault, but I don't know if the problem is in the
property code, or in how I'm using it. After an AI object terminates, if you
access the property tree through the property browser the sim will segfault.
